[SCSI] be2iscsi: Fix MBX Command issues

- Check Ready Bit before posting the BMBX Hi Address
- Fix the parameters passed to beiscsi_mccq_compl
  in beiscsi_open_conn()
- Fix tag value check in beiscsi_ep_connect.
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

drivers/scsi/be2iscsi/be_cmds.c

@@ -492,7 +492,7 @@ static int be_mbox_db_ready_wait(struct be_ctrl_info *ctrl)
 {
 	void __iomem *db = ctrl->db + MPU_MAILBOX_DB_OFFSET;
 	struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev);
-	int wait = 0;
+	uint32_t wait = 0;
 	u32 ready;
 
 	do {
@@ -540,6 +540,10 @@ int be_mbox_notify(struct be_ctrl_info *ctrl)
 	struct be_mcc_compl *compl = &mbox->compl;
 	struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev);
 
+	status = be_mbox_db_ready_wait(ctrl);
+	if (status)
+		return status;
+
 	val &= ~MPU_MAILBOX_DB_RDY_MASK;
 	val |= MPU_MAILBOX_DB_HI_MASK;
 	val |= (upper_32_bits(mbox_mem->dma) >> 2) << 2;
@@ -593,6 +597,10 @@ static int be_mbox_notify_wait(struct beiscsi_hba *phba)
 	struct be_mcc_compl *compl = &mbox->compl;
 	struct be_ctrl_info *ctrl = &phba->ctrl;
 
+	status = be_mbox_db_ready_wait(ctrl);
+	if (status)
+		return status;
+
 	val |= MPU_MAILBOX_DB_HI_MASK;
 	/* at bits 2 - 31 place mbox dma addr msb bits 34 - 63 */
 	val |= (upper_32_bits(mbox_mem->dma) >> 2) << 2;

drivers/scsi/be2iscsi/be_iscsi.c

@@ -1009,7 +1009,6 @@ static int beiscsi_open_conn(struct iscsi_endpoint *ep,
 {
 	struct beiscsi_endpoint *beiscsi_ep = ep->dd_data;
 	struct beiscsi_hba *phba = beiscsi_ep->phba;
-	struct be_mcc_wrb *wrb;
 	struct tcp_connect_and_offload_out *ptcpcnct_out;
 	struct be_dma_mem nonemb_cmd;
 	unsigned int tag;
@@ -1055,7 +1054,7 @@ static int beiscsi_open_conn(struct iscsi_endpoint *ep,
 	nonemb_cmd.size = sizeof(struct tcp_connect_and_offload_in);
 	memset(nonemb_cmd.va, 0, nonemb_cmd.size);
 	tag = mgmt_open_connection(phba, dst_addr, beiscsi_ep, &nonemb_cmd);
-	if (!tag) {
+	if (tag <= 0) {
 		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG,
 			    "BS_%d : mgmt_open_connection Failed for cid=%d\n",
 			    beiscsi_ep->ep_cid);
@@ -1066,7 +1065,7 @@ static int beiscsi_open_conn(struct iscsi_endpoint *ep,
 		return -EAGAIN;
 	}
 
-	ret = beiscsi_mccq_compl(phba, tag, &wrb, NULL);
+	ret = beiscsi_mccq_compl(phba, tag, NULL, nonemb_cmd.va);
 	if (ret) {
 		beiscsi_log(phba, KERN_ERR,
 			    BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX,
@@ -1077,7 +1076,7 @@ static int beiscsi_open_conn(struct iscsi_endpoint *ep,
 		goto free_ep;
 	}
 
-	ptcpcnct_out = embedded_payload(wrb);
+	ptcpcnct_out = (struct tcp_connect_and_offload_out *)nonemb_cmd.va;
 	beiscsi_ep = ep->dd_data;
 	beiscsi_ep->fw_handle = ptcpcnct_out->connection_handle;
 	beiscsi_ep->cid_vld = 1;