V4L/DVB (7722): pvrusb2: Implement FM radio support for Gotview USB2.0 DVD 2

Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c

@@ -84,7 +84,9 @@ static const struct routing_scheme_item routing_schemegv[] = {
 		.vid = CX25840_COMPOSITE2,
 		.aud = CX25840_AUDIO5,
 	},
-	[PVR2_CVAL_INPUT_RADIO] = { /* Treat the same as composite */
+	[PVR2_CVAL_INPUT_RADIO] = {
+		/* line-in is used for radio and composite.  A GPIO is
+		   used to switch between the two choices. */
 		.vid = CX25840_COMPOSITE1,
 		.aud = CX25840_AUDIO_SERIAL,
 	},

drivers/media/video/pvrusb2/pvrusb2-devattr.c

@@ -124,6 +124,7 @@ static const struct pvr2_device_desc pvr2_device_gotview_2 = {
 		.flag_has_cx25840 = !0,
 		.default_tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
 		.flag_has_analogtuner = !0,
+		.flag_has_fmradio = !0,
 		.flag_has_composite = !0,
 		.flag_has_svideo = !0,
 		.signal_routing_scheme = PVR2_ROUTING_SCHEME_GOTVIEW,

drivers/media/video/pvrusb2/pvrusb2-hdw.c

@@ -1321,6 +1321,12 @@ int pvr2_upload_firmware2(struct pvr2_hdw *hdw)
 	}
 
  done:
+	if (hdw->hdw_desc->signal_routing_scheme ==
+	    PVR2_ROUTING_SCHEME_GOTVIEW) {
+		/* Ensure that GPIO 11 is set to output for GOTVIEW
+		   hardware. */
+		pvr2_hdw_gpio_chg_dir(hdw,(1 << 11),~0);
+	}
 	return ret;
 }
 
@@ -1735,6 +1741,13 @@ static void pvr2_hdw_setup_low(struct pvr2_hdw *hdw)
 
 	if (!pvr2_hdw_dev_ok(hdw)) return;
 
+	if (hdw->hdw_desc->signal_routing_scheme ==
+	    PVR2_ROUTING_SCHEME_GOTVIEW) {
+		/* Ensure that GPIO 11 is set to output for GOTVIEW
+		   hardware. */
+		pvr2_hdw_gpio_chg_dir(hdw,(1 << 11),~0);
+	}
+
 	pvr2_hdw_commit_setup(hdw);
 
 	hdw->vid_stream = pvr2_stream_create();
@@ -2498,6 +2511,20 @@ static int pvr2_hdw_commit_execute(struct pvr2_hdw *hdw)
 		hdw->active_stream_type = hdw->desired_stream_type;
 	}
 
+	if (hdw->hdw_desc->signal_routing_scheme ==
+	    PVR2_ROUTING_SCHEME_GOTVIEW) {
+		u32 b;
+		/* Handle GOTVIEW audio switching */
+		pvr2_hdw_gpio_get_out(hdw,&b);
+		if (hdw->input_val == PVR2_CVAL_INPUT_RADIO) {
+			/* Set GPIO 11 */
+			pvr2_hdw_gpio_chg_out(hdw,(1 << 11),~0);
+		} else {
+			/* Clear GPIO 11 */
+			pvr2_hdw_gpio_chg_out(hdw,(1 << 11),0);
+		}
+	}
+
 	/* Now execute i2c core update */
 	pvr2_i2c_core_sync(hdw);