ARM: OMAP: Make plat/omap-pm.h local to mach-omap2

We must move this for ARM common zImage support.

Note that neither drivers/media/rc/ir-rx51.c or
drivers/media/platform/omap3isp/ispvideo.c need
to include omap-pm.h, so this patch removes the
include for those files.
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Timo Kokkonen <timo.t.kokkonen@iki.fi>
Cc: linux-media@vger.kernel.org
Signed-off-by: NTony Lindgren <tony@atomide.com>

arch/arm/mach-omap1/pm_bus.c

@@ -19,8 +19,6 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 
-#include <plat/omap-pm.h>
-
 #ifdef CONFIG_PM_RUNTIME
 static int omap1_pm_runtime_suspend(struct device *dev)
 {

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -32,7 +32,6 @@
 
 #include "common.h"
 #include <plat-omap/dma-omap.h>
-#include <plat/omap-pm.h>
 #include "gpmc-smc91x.h"
 
 #include "board-rx51.h"
@@ -51,6 +50,7 @@
 #endif
 
 #include "mux.h"
+#include "omap-pm.h"
 #include "hsmmc.h"
 #include "common-board-devices.h"
 #include "gpmc.h"

arch/arm/mach-omap2/display.c

@@ -27,7 +27,7 @@
 #include <video/omapdss.h>
 #include "omap_hwmod.h"
 #include "omap_device.h"
-#include <plat/omap-pm.h>
+#include "omap-pm.h"
 #include "common.h"
 
 #include "iomap.h"

arch/arm/mach-omap2/dsp.c

@@ -27,7 +27,7 @@
 #include "cm2xxx_3xxx.h"
 #include "prm2xxx_3xxx.h"
 #ifdef CONFIG_BRIDGE_DVFS
-#include <plat/omap-pm.h>
+#include "omap-pm.h"
 #endif
 
 #include <linux/platform_data/dsp-omap.h>

arch/arm/mach-omap2/gpio.c

@@ -25,7 +25,7 @@
 
 #include "omap_hwmod.h"
 #include "omap_device.h"
-#include <plat/omap-pm.h>
+#include "omap-pm.h"
 
 #include "powerdomain.h"
 

arch/arm/mach-omap2/hsmmc.c

@@ -17,8 +17,8 @@
 #include <mach/hardware.h>
 #include <linux/platform_data/gpio-omap.h>
 
-#include <plat/omap-pm.h>
 #include "omap_device.h"
+#include "omap-pm.h"
 
 #include "mux.h"
 #include "mmc.h"

arch/arm/mach-omap2/io.c

@@ -26,7 +26,6 @@
 #include <asm/mach/map.h>
 
 #include <plat/serial.h>
-#include <plat/omap-pm.h>
 #include <plat-omap/dma-omap.h>
 
 #include "../plat-omap/sram.h"
@@ -42,6 +41,7 @@
 #include "clock2xxx.h"
 #include "clock3xxx.h"
 #include "clock44xx.h"
+#include "omap-pm.h"
 #include "sdrc.h"
 
 /*

arch/arm/mach-omap2/pm-debug.c

@@ -31,7 +31,7 @@
 #include "powerdomain.h"
 #include "clockdomain.h"
 #include <plat/dmtimer.h>
-#include <plat/omap-pm.h>
+#include "omap-pm.h"
 
 #include "cm2xxx_3xxx.h"
 #include "prm2xxx_3xxx.h"

arch/arm/mach-omap2/pm.c

@@ -20,7 +20,7 @@
 
 #include <asm/system_misc.h>
 
-#include <plat/omap-pm.h>
+#include "omap-pm.h"
 #include "omap_device.h"
 #include "common.h"
 

arch/arm/mach-omap2/serial.c

@@ -29,12 +29,12 @@
 
 #include <plat/omap-serial.h>
 #include <plat-omap/dma-omap.h>
-#include <plat/omap-pm.h>
 #include <plat/serial.h>
 
 #include "common.h"
 #include "omap_hwmod.h"
 #include "omap_device.h"
+#include "omap-pm.h"
 #include "prm2xxx_3xxx.h"
 #include "pm.h"
 #include "cm2xxx_3xxx.h"

arch/arm/mach-omap2/timer.c

@@ -46,7 +46,7 @@
 #include "omap_hwmod.h"
 #include "omap_device.h"
 #include <plat/dmtimer.h>
-#include <plat/omap-pm.h>
+#include "omap-pm.h"
 
 #include "soc.h"
 #include "common.h"

arch/arm/plat-omap/dmtimer.c

@@ -42,10 +42,11 @@
 #include <linux/pm_runtime.h>
 
 #include <plat/dmtimer.h>
-#include <plat/omap-pm.h>
 
 #include <mach/hardware.h>
 
+#include "../mach-omap2/omap-pm.h"
+
 static u32 omap_reserved_systimers;
 static LIST_HEAD(omap_timer_list);
 static DEFINE_SPINLOCK(dm_timer_lock);

arch/arm/plat-omap/omap-pm-noop.c

@@ -22,10 +22,8 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 
-/* Interface documentation is in mach/omap-pm.h */
-#include <plat/omap-pm.h>
-
 #include "../mach-omap2/omap_device.h"
+#include "../mach-omap2/omap-pm.h"
 
 static bool off_mode_enabled;
 static int dummy_context_loss_counter;

drivers/media/rc/ir-rx51.c

@@ -28,7 +28,6 @@
 
 #include <plat/dmtimer.h>
 #include <plat/clock.h>
-#include <plat/omap-pm.h>
 
 #include <media/lirc.h>
 #include <media/lirc_dev.h>