提交 1d328606 编写于 作者: J Joseph Lo 提交者: Stephen Warren

ARM: tegra20: cpuidle: apply coupled cpuidle for powered-down mode

The "powered-down" cpuidle mode of Tegra20 needs the CPU0 be the last one
core to go into this mode before other core. The coupled cpuidle framework
can help to sync the MPCore to coupled state then go into "powered-down"
idle mode together. The driver can just assume the MPCore come into
"powered-down" mode at the same time. No need to take care if the CPU_0
goes into this mode along and only can put it into safe idle mode (WFI).

The powered-down state of Tegra20 requires power gating both CPU cores.
When the secondary CPU requests to enter powered-down state, it saves
its own contexts and then enters WFI for waiting CPU0 in the same state.
When the CPU0 requests powered-down state, it attempts to put the secondary
CPU into reset to prevent it from waking up. Then power down both CPUs
together and power off the cpu rail.

Be aware of that, you may see the legacy power state "LP2" in the code
which is exactly the same meaning of "CPU power down".

Based on the work by:
Colin Cross <ccross@android.com>
Gary King <gking@nvidia.com>
Signed-off-by: NJoseph Lo <josephl@nvidia.com>
Acked-by: NColin Cross <ccross@android.com>
Signed-off-by: NStephen Warren <swarren@nvidia.com>
上级 afec581c
......@@ -4,6 +4,7 @@ comment "NVIDIA Tegra options"
config ARCH_TEGRA_2x_SOC
bool "Enable support for Tegra20 family"
select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
select ARCH_REQUIRE_GPIOLIB
select ARM_ERRATA_720789
select ARM_ERRATA_742230 if SMP
......
......@@ -24,6 +24,7 @@
#include <linux/cpuidle.h>
#include <linux/cpu_pm.h>
#include <linux/clockchips.h>
#include <linux/clk/tegra.h>
#include <asm/cpuidle.h>
#include <asm/proc-fns.h>
......@@ -32,22 +33,28 @@
#include "pm.h"
#include "sleep.h"
#include "iomap.h"
#include "irq.h"
#include "flowctrl.h"
#ifdef CONFIG_PM_SLEEP
static int tegra20_idle_lp2(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index);
static bool abort_flag;
static atomic_t abort_barrier;
static int tegra20_idle_lp2_coupled(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index);
#endif
static struct cpuidle_state tegra_idle_states[] = {
[0] = ARM_CPUIDLE_WFI_STATE_PWR(600),
#ifdef CONFIG_PM_SLEEP
[1] = {
.enter = tegra20_idle_lp2,
.enter = tegra20_idle_lp2_coupled,
.exit_latency = 5000,
.target_residency = 10000,
.power_usage = 0,
.flags = CPUIDLE_FLAG_TIME_VALID,
.flags = CPUIDLE_FLAG_TIME_VALID |
CPUIDLE_FLAG_COUPLED,
.name = "powered-down",
.desc = "CPU power gated",
},
......@@ -63,6 +70,88 @@ static struct cpuidle_driver tegra_idle_driver = {
static DEFINE_PER_CPU(struct cpuidle_device, tegra_idle_device);
#ifdef CONFIG_PM_SLEEP
#ifdef CONFIG_SMP
static void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE);
static int tegra20_reset_sleeping_cpu_1(void)
{
int ret = 0;
tegra_pen_lock();
if (readl(pmc + PMC_SCRATCH41) == CPU_RESETTABLE)
tegra20_cpu_shutdown(1);
else
ret = -EINVAL;
tegra_pen_unlock();
return ret;
}
static void tegra20_wake_cpu1_from_reset(void)
{
tegra_pen_lock();
tegra20_cpu_clear_resettable();
/* enable cpu clock on cpu */
tegra_enable_cpu_clock(1);
/* take the CPU out of reset */
tegra_cpu_out_of_reset(1);
/* unhalt the cpu */
flowctrl_write_cpu_halt(1, 0);
tegra_pen_unlock();
}
static int tegra20_reset_cpu_1(void)
{
if (!cpu_online(1) || !tegra20_reset_sleeping_cpu_1())
return 0;
tegra20_wake_cpu1_from_reset();
return -EBUSY;
}
#else
static inline void tegra20_wake_cpu1_from_reset(void)
{
}
static inline int tegra20_reset_cpu_1(void)
{
return 0;
}
#endif
static bool tegra20_cpu_cluster_power_down(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
{
struct cpuidle_state *state = &drv->states[index];
u32 cpu_on_time = state->exit_latency;
u32 cpu_off_time = state->target_residency - state->exit_latency;
while (tegra20_cpu_is_resettable_soon())
cpu_relax();
if (tegra20_reset_cpu_1() || !tegra_cpu_rail_off_ready())
return false;
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &dev->cpu);
tegra_idle_lp2_last(cpu_on_time, cpu_off_time);
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu);
if (cpu_online(1))
tegra20_wake_cpu1_from_reset();
return true;
}
#ifdef CONFIG_SMP
static bool tegra20_idle_enter_lp2_cpu_1(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
......@@ -87,20 +176,31 @@ static inline bool tegra20_idle_enter_lp2_cpu_1(struct cpuidle_device *dev,
}
#endif
static int tegra20_idle_lp2(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
static int tegra20_idle_lp2_coupled(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
{
u32 cpu = is_smp() ? cpu_logical_map(dev->cpu) : dev->cpu;
bool entered_lp2 = false;
if (tegra_pending_sgi())
ACCESS_ONCE(abort_flag) = true;
cpuidle_coupled_parallel_barrier(dev, &abort_barrier);
if (abort_flag) {
cpuidle_coupled_parallel_barrier(dev, &abort_barrier);
abort_flag = false; /* clean flag for next coming */
return -EINTR;
}
local_fiq_disable();
tegra_set_cpu_in_lp2(cpu);
cpu_pm_enter();
if (cpu == 0)
cpu_do_idle();
entered_lp2 = tegra20_cpu_cluster_power_down(dev, drv, index);
else
entered_lp2 = tegra20_idle_enter_lp2_cpu_1(dev, drv, index);
......@@ -122,6 +222,10 @@ int __init tegra20_cpuidle_init(void)
struct cpuidle_device *dev;
struct cpuidle_driver *drv = &tegra_idle_driver;
#ifdef CONFIG_PM_SLEEP
tegra_tear_down_cpu = tegra20_tear_down_cpu;
#endif
drv->state_count = ARRAY_SIZE(tegra_idle_states);
memcpy(drv->states, tegra_idle_states,
drv->state_count * sizeof(drv->states[0]));
......@@ -135,6 +239,9 @@ int __init tegra20_cpuidle_init(void)
for_each_possible_cpu(cpu) {
dev = &per_cpu(tegra_idle_device, cpu);
dev->cpu = cpu;
#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
dev->coupled_cpus = *cpu_possible_mask;
#endif
dev->state_count = drv->state_count;
ret = cpuidle_register_device(dev);
......
......@@ -57,6 +57,9 @@ ENDPROC(tegra20_hotplug_shutdown)
ENTRY(tegra20_cpu_shutdown)
cmp r0, #0
moveq pc, lr @ must not be called for CPU 0
mov32 r1, TEGRA_PMC_VIRT + PMC_SCRATCH41
mov r12, #CPU_RESETTABLE
str r12, [r1]
cpu_to_halt_reg r1, r0
ldr r3, =TEGRA_FLOW_CTRL_VIRT
......@@ -162,6 +165,21 @@ ENTRY(tegra20_cpu_set_resettable_soon)
mov pc, lr
ENDPROC(tegra20_cpu_set_resettable_soon)
/*
* tegra20_cpu_is_resettable_soon(void)
*
* Returns true if the "resettable soon" flag in PMC_SCRATCH41 has been
* set because it is expected that the secondary CPU will be idle soon.
*/
ENTRY(tegra20_cpu_is_resettable_soon)
mov32 r1, TEGRA_PMC_VIRT + PMC_SCRATCH41
ldr r12, [r1]
cmp r12, #CPU_RESETTABLE_SOON
moveq r0, #1
movne r0, #0
mov pc, lr
ENDPROC(tegra20_cpu_is_resettable_soon)
/*
* tegra20_sleep_cpu_secondary_finish(unsigned long v2p)
*
......@@ -221,4 +239,39 @@ ENTRY(tegra20_sleep_cpu_secondary_finish)
ldmfd sp!, {r4 - r11, pc}
ENDPROC(tegra20_sleep_cpu_secondary_finish)
/*
* tegra20_tear_down_cpu
*
* Switches the CPU cluster to PLL-P and enters sleep.
*/
ENTRY(tegra20_tear_down_cpu)
bl tegra_switch_cpu_to_pllp
b tegra20_enter_sleep
ENDPROC(tegra20_tear_down_cpu)
/*
* tegra20_enter_sleep
*
* uses flow controller to enter sleep state
* executes from IRAM with SDRAM in selfrefresh when target state is LP0 or LP1
* executes from SDRAM with target state is LP2
*/
tegra20_enter_sleep:
mov32 r6, TEGRA_FLOW_CTRL_BASE
mov r0, #FLOW_CTRL_WAIT_FOR_INTERRUPT
orr r0, r0, #FLOW_CTRL_HALT_CPU_IRQ | FLOW_CTRL_HALT_CPU_FIQ
cpu_id r1
cpu_to_halt_reg r1, r1
str r0, [r6, r1]
dsb
ldr r0, [r6, r1] /* memory barrier */
halted:
dsb
wfe /* CPU should be power gated here */
isb
b halted
#endif
......@@ -34,6 +34,9 @@
#include "flowctrl.h"
#include "sleep.h"
#define CLK_RESET_CCLK_BURST 0x20
#define CLK_RESET_CCLK_DIVIDER 0x24
#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP)
/*
* tegra_disable_clean_inv_dcache
......@@ -110,4 +113,20 @@ ENTRY(tegra_shut_off_mmu)
mov pc, r0
ENDPROC(tegra_shut_off_mmu)
.popsection
/*
* tegra_switch_cpu_to_pllp
*
* In LP2 the normal cpu clock pllx will be turned off. Switch the CPU to pllp
*/
ENTRY(tegra_switch_cpu_to_pllp)
/* in LP2 idle (SDRAM active), set the CPU burst policy to PLLP */
mov32 r5, TEGRA_CLK_RESET_BASE
mov r0, #(2 << 28) @ burst policy = run mode
orr r0, r0, #(4 << 4) @ use PLLP in run mode burst
str r0, [r5, #CLK_RESET_CCLK_BURST]
mov r0, #0
str r0, [r5, #CLK_RESET_CCLK_DIVIDER]
mov pc, lr
ENDPROC(tegra_switch_cpu_to_pllp)
#endif
......@@ -131,6 +131,8 @@ static inline void tegra20_hotplug_init(void) {}
static inline void tegra30_hotplug_init(void) {}
#endif
void tegra20_cpu_shutdown(int cpu);
int tegra20_cpu_is_resettable_soon(void);
void tegra20_cpu_clear_resettable(void);
#ifdef CONFIG_ARCH_TEGRA_2x_SOC
void tegra20_cpu_set_resettable_soon(void);
......@@ -139,6 +141,7 @@ static inline void tegra20_cpu_set_resettable_soon(void) {}
#endif
int tegra20_sleep_cpu_secondary_finish(unsigned long);
void tegra20_tear_down_cpu(void);
int tegra30_sleep_cpu_secondary_finish(unsigned long);
void tegra30_tear_down_cpu(void);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册