提交 1d19f176 编写于 作者: L Linus Torvalds

Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [ATM] CLIP: Do not refer freed skbuff in clip_mkip().
  [NET]: Drop tx lock in dev_watchdog_up
  [PACKET]: Don't truncate non-linear skbs with mmaped IO
  [NET]: Mark frame diverter for future removal.
  [NETFILTER]: Add secmark headers to header-y
  [ATM]: linux-atm-general mailing list is subscribers only
  [ATM]: [he] when transmit fails, unmap the dma regions
  [TCP] tcp-lp: update information to MAINTAINERS
  [TCP] tcp-lp: bug fix for oops in 2.6.18-rc6
  [BRIDGE]: random extra bytes on STP TCN packet
  [IPV6]: Accept -1 for IPV6_TCLASS
  [IPV6]: Fix tclass setting for raw sockets.
  [IPVS]: remove the debug option go ip_vs_ftp
  [IPVS]: Make sure ip_vs_ftp ports are valid
  [IPVS]: auto-help for ip_vs_ftp
  [IPVS]: Document the ports option to ip_vs_ftp in kernel-parameters.txt
  [TCP]: Turn ABC off.
  [NEIGH]: neigh_table_clear() doesn't free stats
......@@ -281,3 +281,16 @@ Why: The deferred output hooks are a layering violation causing unusual
Who: Patrick McHardy <kaber@trash.net>
---------------------------
What: frame diverter
When: November 2006
Why: The frame diverter is included in most distribution kernels, but is
broken. It does not correctly handle many things:
- IPV6
- non-linear skb's
- network device RCU on removal
- input frames not correctly checked for protocol errors
It also adds allocation overhead even if not enabled.
It is not clear if anyone is still using it.
Who: Stephen Hemminger <shemminger@osdl.org>
......@@ -697,6 +697,12 @@ running once the system is up.
ips= [HW,SCSI] Adaptec / IBM ServeRAID controller
See header of drivers/scsi/ips.c.
ports= [IP_VS_FTP] IPVS ftp helper module
Default is 21.
Up to 8 (IP_VS_APP_MAX_PORTS) ports
may be specified.
Format: <port>,<port>....
irqfixup [HW]
When an interrupt is not handled search all handlers
for it. Intended to get systems with badly broken
......
......@@ -102,9 +102,15 @@ inet_peer_gc_maxtime - INTEGER
TCP variables:
tcp_abc - INTEGER
Controls Appropriate Byte Count defined in RFC3465. If set to
0 then does congestion avoid once per ack. 1 is conservative
value, and 2 is more agressive.
Controls Appropriate Byte Count (ABC) defined in RFC3465.
ABC is a way of increasing congestion window (cwnd) more slowly
in response to partial acknowledgments.
Possible values are:
0 increase cwnd once per acknowledgment (no ABC)
1 increase cwnd once per acknowledgment of full sized segment
2 allow increase cwnd by two if acknowledgment is
of two segments to compensate for delayed acknowledgments.
Default: 0 (off)
tcp_syn_retries - INTEGER
Number of times initial SYNs for an active TCP connection attempt
......
......@@ -416,7 +416,7 @@ S: Supported
ATM
P: Chas Williams
M: chas@cmf.nrl.navy.mil
L: linux-atm-general@lists.sourceforge.net
L: linux-atm-general@lists.sourceforge.net (subscribers-only)
W: http://linux-atm.sourceforge.net
S: Maintained
......@@ -2810,6 +2810,14 @@ M: hadi@cyberus.ca
L: netdev@vger.kernel.org
S: Maintained
TCP LOW PRIORITY MODULE
P: Wong Hoi Sing, Edison
M: hswong3i@gmail.com
P: Hung Hing Lun, Mike
M: hlhung3i@gmail.com
W: http://tcp-lp-mod.sourceforge.net/
S: Maintained
TI OMAP RANDOM NUMBER GENERATOR SUPPORT
P: Deepak Saxena
M: dsaxena@plexity.net
......
......@@ -2282,6 +2282,8 @@ __enqueue_tpd(struct he_dev *he_dev, struct he_tpd *tpd, unsigned cid)
TPDRQ_MASK(he_readl(he_dev, TPDRQ_B_H)));
if (new_tail == he_dev->tpdrq_head) {
int slot;
hprintk("tpdrq full (cid 0x%x)\n", cid);
/*
* FIXME
......@@ -2289,6 +2291,13 @@ __enqueue_tpd(struct he_dev *he_dev, struct he_tpd *tpd, unsigned cid)
* after service_tbrq, service the backlog
* for now, we just drop the pdu
*/
for (slot = 0; slot < TPD_MAXIOV; ++slot) {
if (tpd->iovec[slot].addr)
pci_unmap_single(he_dev->pci_dev,
tpd->iovec[slot].addr,
tpd->iovec[slot].len & TPD_LEN_MASK,
PCI_DMA_TODEVICE);
}
if (tpd->skb) {
if (tpd->vcc->pop)
tpd->vcc->pop(tpd->vcc, tpd->skb);
......
......@@ -5,7 +5,7 @@ header-y := nf_conntrack_sctp.h nf_conntrack_tuple_common.h \
xt_helper.h xt_length.h xt_limit.h xt_mac.h xt_mark.h \
xt_MARK.h xt_multiport.h xt_NFQUEUE.h xt_pkttype.h \
xt_policy.h xt_realm.h xt_sctp.h xt_state.h xt_string.h \
xt_tcpmss.h xt_tcpudp.h
xt_tcpmss.h xt_tcpudp.h xt_SECMARK.h xt_CONNSECMARK.h
unifdef-y := nf_conntrack_common.h nf_conntrack_ftp.h \
nf_conntrack_tcp.h nfnetlink.h x_tables.h xt_physdev.h
......@@ -177,7 +177,7 @@ source "net/lapb/Kconfig"
config NET_DIVERT
bool "Frame Diverter (EXPERIMENTAL)"
depends on EXPERIMENTAL
depends on EXPERIMENTAL && BROKEN
---help---
The Frame Diverter allows you to divert packets from the
network, that are not aimed at the interface receiving it (in
......
......@@ -500,9 +500,11 @@ static int clip_mkip(struct atm_vcc *vcc, int timeout)
} else {
unsigned int len = skb->len;
skb_get(skb);
clip_push(vcc, skb);
PRIV(skb->dev)->stats.rx_packets--;
PRIV(skb->dev)->stats.rx_bytes -= len;
kfree_skb(skb);
}
return 0;
}
......
......@@ -121,7 +121,7 @@ void br_send_tcn_bpdu(struct net_bridge_port *p)
buf[1] = 0;
buf[2] = 0;
buf[3] = BPDU_TYPE_TCN;
br_send_bpdu(p, buf, 7);
br_send_bpdu(p, buf, 4);
}
/*
......
......@@ -1432,6 +1432,9 @@ int neigh_table_clear(struct neigh_table *tbl)
kfree(tbl->phash_buckets);
tbl->phash_buckets = NULL;
free_percpu(tbl->stats);
tbl->stats = NULL;
return 0;
}
......
......@@ -46,14 +46,7 @@
*/
static int ports[IP_VS_APP_MAX_PORTS] = {21, 0};
module_param_array(ports, int, NULL, 0);
/*
* Debug level
*/
#ifdef CONFIG_IP_VS_DEBUG
static int debug=0;
module_param(debug, int, 0);
#endif
MODULE_PARM_DESC(ports, "Ports to monitor for FTP control commands");
/* Dummy variable */
......@@ -177,7 +170,7 @@ static int ip_vs_ftp_out(struct ip_vs_app *app, struct ip_vs_conn *cp,
&start, &end) != 1)
return 1;
IP_VS_DBG(1-debug, "PASV response (%u.%u.%u.%u:%d) -> "
IP_VS_DBG(7, "PASV response (%u.%u.%u.%u:%d) -> "
"%u.%u.%u.%u:%d detected\n",
NIPQUAD(from), ntohs(port), NIPQUAD(cp->caddr), 0);
......@@ -280,7 +273,7 @@ static int ip_vs_ftp_in(struct ip_vs_app *app, struct ip_vs_conn *cp,
while (data <= data_limit - 6) {
if (strnicmp(data, "PASV\r\n", 6) == 0) {
/* Passive mode on */
IP_VS_DBG(1-debug, "got PASV at %zd of %zd\n",
IP_VS_DBG(7, "got PASV at %zd of %zd\n",
data - data_start,
data_limit - data_start);
cp->app_data = &ip_vs_ftp_pasv;
......@@ -302,7 +295,7 @@ static int ip_vs_ftp_in(struct ip_vs_app *app, struct ip_vs_conn *cp,
&start, &end) != 1)
return 1;
IP_VS_DBG(1-debug, "PORT %u.%u.%u.%u:%d detected\n",
IP_VS_DBG(7, "PORT %u.%u.%u.%u:%d detected\n",
NIPQUAD(to), ntohs(port));
/* Passive mode off */
......@@ -311,7 +304,7 @@ static int ip_vs_ftp_in(struct ip_vs_app *app, struct ip_vs_conn *cp,
/*
* Now update or create a connection entry for it
*/
IP_VS_DBG(1-debug, "protocol %s %u.%u.%u.%u:%d %u.%u.%u.%u:%d\n",
IP_VS_DBG(7, "protocol %s %u.%u.%u.%u:%d %u.%u.%u.%u:%d\n",
ip_vs_proto_name(iph->protocol),
NIPQUAD(to), ntohs(port), NIPQUAD(cp->vaddr), 0);
......@@ -372,11 +365,17 @@ static int __init ip_vs_ftp_init(void)
for (i=0; i<IP_VS_APP_MAX_PORTS; i++) {
if (!ports[i])
continue;
if (ports[i] < 0 || ports[i] > 0xffff) {
IP_VS_WARNING("ip_vs_ftp: Ignoring invalid "
"configuration port[%d] = %d\n",
i, ports[i]);
continue;
}
ret = register_ip_vs_app_inc(app, app->protocol, ports[i]);
if (ret)
break;
IP_VS_DBG(1-debug, "%s: loaded support on port[%d] = %d\n",
app->name, i, ports[i]);
IP_VS_INFO("%s: loaded support on port[%d] = %d\n",
app->name, i, ports[i]);
}
if (ret)
......
......@@ -89,7 +89,7 @@ int sysctl_tcp_frto;
int sysctl_tcp_nometrics_save;
int sysctl_tcp_moderate_rcvbuf = 1;
int sysctl_tcp_abc = 1;
int sysctl_tcp_abc;
#define FLAG_DATA 0x01 /* Incoming frame contained data. */
#define FLAG_WIN_UPDATE 0x02 /* Incoming ACK was a window update. */
......
......@@ -3,13 +3,8 @@
*
* TCP Low Priority is a distributed algorithm whose goal is to utilize only
* the excess network bandwidth as compared to the ``fair share`` of
* bandwidth as targeted by TCP. Available from:
* http://www.ece.rice.edu/~akuzma/Doc/akuzma/TCP-LP.pdf
* bandwidth as targeted by TCP.
*
* Original Author:
* Aleksandar Kuzmanovic <akuzma@northwestern.edu>
*
* See http://www-ece.rice.edu/networks/TCP-LP/ for their implementation.
* As of 2.6.13, Linux supports pluggable congestion control algorithms.
* Due to the limitation of the API, we take the following changes from
* the original TCP-LP implementation:
......@@ -24,11 +19,20 @@
* o OWD is handled in relative format, where local time stamp will in
* tcp_time_stamp format.
*
* Port from 2.4.19 to 2.6.16 as module by:
* Wong Hoi Sing Edison <hswong3i@gmail.com>
* Hung Hing Lun <hlhung3i@gmail.com>
* Original Author:
* Aleksandar Kuzmanovic <akuzma@northwestern.edu>
* Available from:
* http://www.ece.rice.edu/~akuzma/Doc/akuzma/TCP-LP.pdf
* Original implementation for 2.4.19:
* http://www-ece.rice.edu/networks/TCP-LP/
*
* Version: $Id: tcp_lp.c,v 1.22 2006-05-02 18:18:19 hswong3i Exp $
* 2.6.x module Authors:
* Wong Hoi Sing, Edison <hswong3i@gmail.com>
* Hung Hing Lun, Mike <hlhung3i@gmail.com>
* SourceForge project page:
* http://tcp-lp-mod.sourceforge.net/
*
* Version: $Id: tcp_lp.c,v 1.24 2006/09/05 20:22:53 hswong3i Exp $
*/
#include <linux/config.h>
......@@ -153,16 +157,19 @@ static u32 tcp_lp_remote_hz_estimator(struct sock *sk)
if (m < 0)
m = -m;
if (rhz != 0) {
if (rhz > 0) {
m -= rhz >> 6; /* m is now error in remote HZ est */
rhz += m; /* 63/64 old + 1/64 new */
} else
rhz = m << 6;
out:
/* record time for successful remote HZ calc */
lp->flag |= LP_VALID_RHZ;
if (rhz > 0)
lp->flag |= LP_VALID_RHZ;
else
lp->flag &= ~LP_VALID_RHZ;
out:
/* record reference time stamp */
lp->remote_ref_time = tp->rx_opt.rcv_tsval;
lp->local_ref_time = tp->rx_opt.rcv_tsecr;
......@@ -333,6 +340,6 @@ static void __exit tcp_lp_unregister(void)
module_init(tcp_lp_register);
module_exit(tcp_lp_unregister);
MODULE_AUTHOR("Wong Hoi Sing Edison, Hung Hing Lun");
MODULE_AUTHOR("Wong Hoi Sing Edison, Hung Hing Lun Mike");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("TCP Low Priority");
......@@ -696,7 +696,7 @@ int datagram_send_ctl(struct msghdr *msg, struct flowi *fl,
}
tc = *(int *)CMSG_DATA(cmsg);
if (tc < 0 || tc > 0xff)
if (tc < -1 || tc > 0xff)
goto exit_f;
err = 0;
......
......@@ -401,7 +401,7 @@ void icmpv6_send(struct sk_buff *skb, int type, int code, __u32 info,
if (hlimit < 0)
hlimit = ipv6_get_hoplimit(dst->dev);
tclass = np->cork.tclass;
tclass = np->tclass;
if (tclass < 0)
tclass = 0;
......@@ -497,7 +497,7 @@ static void icmpv6_echo_reply(struct sk_buff *skb)
if (hlimit < 0)
hlimit = ipv6_get_hoplimit(dst->dev);
tclass = np->cork.tclass;
tclass = np->tclass;
if (tclass < 0)
tclass = 0;
......
......@@ -362,7 +362,7 @@ static int do_ipv6_setsockopt(struct sock *sk, int level, int optname,
break;
case IPV6_TCLASS:
if (val < 0 || val > 0xff)
if (val < -1 || val > 0xff)
goto e_inval;
np->tclass = val;
retv = 0;
......@@ -947,6 +947,8 @@ static int do_ipv6_getsockopt(struct sock *sk, int level, int optname,
case IPV6_TCLASS:
val = np->tclass;
if (val < 0)
val = 0;
break;
case IPV6_RECVTCLASS:
......
......@@ -781,7 +781,7 @@ static int rawv6_sendmsg(struct kiocb *iocb, struct sock *sk,
}
if (tclass < 0) {
tclass = np->cork.tclass;
tclass = np->tclass;
if (tclass < 0)
tclass = 0;
}
......
......@@ -626,8 +626,6 @@ static int tpacket_rcv(struct sk_buff *skb, struct net_device *dev, struct packe
if ((int)snaplen < 0)
snaplen = 0;
}
if (snaplen > skb->len-skb->data_len)
snaplen = skb->len-skb->data_len;
spin_lock(&sk->sk_receive_queue.lock);
h = (struct tpacket_hdr *)packet_lookup_frame(po, po->head);
......@@ -644,7 +642,7 @@ static int tpacket_rcv(struct sk_buff *skb, struct net_device *dev, struct packe
status &= ~TP_STATUS_LOSING;
spin_unlock(&sk->sk_receive_queue.lock);
memcpy((u8*)h + macoff, skb->data, snaplen);
skb_copy_bits(skb, 0, (u8*)h + macoff, snaplen);
h->tp_len = skb->len;
h->tp_snaplen = snaplen;
......
......@@ -238,9 +238,7 @@ void __netdev_watchdog_up(struct net_device *dev)
static void dev_watchdog_up(struct net_device *dev)
{
netif_tx_lock_bh(dev);
__netdev_watchdog_up(dev);
netif_tx_unlock_bh(dev);
}
static void dev_watchdog_down(struct net_device *dev)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册