MIPS: Netlogic: Add support for XLP5XX

Add support for the XLP5XX processor which is an 8 core variant of the
XLP9XX. Add XLP5XX cases to code which earlier handled XLP9XX.
Signed-off-by: NYonghong Song <ysong@broadcom.com>
Signed-off-by: NJayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6871/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

arch/mips/include/asm/cpu.h

@@ -201,6 +201,7 @@
 #define PRID_IMP_NETLOGIC_XLP3XX	0x1100
 #define PRID_IMP_NETLOGIC_XLP2XX	0x1200
 #define PRID_IMP_NETLOGIC_XLP9XX	0x1500
+#define PRID_IMP_NETLOGIC_XLP5XX	0x1300
 
 /*
  * Particular Revision values for bits 7:0 of the PRId register.

arch/mips/include/asm/netlogic/mips-extns.h

@@ -148,7 +148,8 @@ static inline int nlm_nodeid(void)
 {
 	uint32_t prid = read_c0_prid() & PRID_IMP_MASK;
 
-	if (prid == PRID_IMP_NETLOGIC_XLP9XX)
+	if ((prid == PRID_IMP_NETLOGIC_XLP9XX) ||
+			(prid == PRID_IMP_NETLOGIC_XLP5XX))
 		return (__read_32bit_c0_register($15, 1) >> 7) & 0x7;
 	else
 		return (__read_32bit_c0_register($15, 1) >> 5) & 0x3;

arch/mips/include/asm/netlogic/xlp-hal/xlp.h

@@ -102,14 +102,16 @@ static inline int cpu_is_xlpii(void)
 	int chip = read_c0_prid() & PRID_IMP_MASK;
 
 	return chip == PRID_IMP_NETLOGIC_XLP2XX ||
-		chip == PRID_IMP_NETLOGIC_XLP9XX;
+		chip == PRID_IMP_NETLOGIC_XLP9XX ||
+		chip == PRID_IMP_NETLOGIC_XLP5XX;
 }
 
 static inline int cpu_is_xlp9xx(void)
 {
 	int chip = read_c0_prid() & PRID_IMP_MASK;
 
-	return chip == PRID_IMP_NETLOGIC_XLP9XX;
+	return chip == PRID_IMP_NETLOGIC_XLP9XX ||
+		chip == PRID_IMP_NETLOGIC_XLP5XX;
 }
 #endif /* !__ASSEMBLY__ */
 #endif /* _ASM_NLM_XLP_H */

arch/mips/kernel/cpu-probe.c

@@ -1059,6 +1059,7 @@ static inline void cpu_probe_netlogic(struct cpuinfo_mips *c, int cpu)
 	switch (c->processor_id & PRID_IMP_MASK) {
 	case PRID_IMP_NETLOGIC_XLP2XX:
 	case PRID_IMP_NETLOGIC_XLP9XX:
+	case PRID_IMP_NETLOGIC_XLP5XX:
 		c->cputype = CPU_XLP;
 		__cpu_name[cpu] = "Broadcom XLPII";
 		break;

arch/mips/netlogic/common/reset.S

@@ -177,6 +177,10 @@ FEXPORT(nlm_reset_entry)
 	beq	t0, t1, 2f		/* does not need to set coherent */
 	nop
 
+	li	t1, 0x1300		/* XLP 5xx */
+	beq	t0, t1, 2f		/* does not need to set coherent */
+	nop
+
 	/* set bit in SYS coherent register for the core */
 	mfc0	t0, CP0_EBASE, 1
 	mfc0	t1, CP0_EBASE, 1

arch/mips/netlogic/xlp/dt.c

@@ -51,6 +51,7 @@ void __init *xlp_dt_init(void *fdtp)
 		switch (current_cpu_data.processor_id & PRID_IMP_MASK) {
 #ifdef CONFIG_DT_XLP_GVP
 		case PRID_IMP_NETLOGIC_XLP9XX:
+		case PRID_IMP_NETLOGIC_XLP5XX:
 			fdtp = __dtb_xlp_gvp_begin;
 			break;
 #endif

arch/mips/netlogic/xlp/setup.c

@@ -123,6 +123,7 @@ const char *get_system_type(void)
 {
 	switch (read_c0_prid() & PRID_IMP_MASK) {
 	case PRID_IMP_NETLOGIC_XLP9XX:
+	case PRID_IMP_NETLOGIC_XLP5XX:
 	case PRID_IMP_NETLOGIC_XLP2XX:
 		return "Broadcom XLPII Series";
 	default:

arch/mips/netlogic/xlp/wakeup.c

@@ -135,7 +135,15 @@ static void xlp_enable_secondary_cores(const cpumask_t *wakeup_mask)
 		if (cpu_is_xlp9xx()) {
 			fusebase = nlm_get_fuse_regbase(n);
 			fusemask = nlm_read_reg(fusebase, FUSE_9XX_DEVCFG6);
-			mask = 0xfffff;
+			switch (read_c0_prid() & PRID_IMP_MASK) {
+			case PRID_IMP_NETLOGIC_XLP5XX:
+				mask = 0xff;
+				break;
+			case PRID_IMP_NETLOGIC_XLP9XX:
+			default:
+				mask = 0xfffff;
+				break;
+			}
 		} else {
 			fusemask = nlm_read_sys_reg(nodep->sysbase,
 						SYS_EFUSE_DEVICE_CFG_STATUS0);