You need to sign in or sign up before continuing.
提交 1bb482f8 编写于 作者: N Narender Kumar 提交者: David S. Miller

netxen: ethtool statistics and control for LRO

Add ethtool -K knob to control LRO in firmware.
LRO path is completely separated from GRO, LRO packets
are still fed with netif_receive_skb().

Also fix ethtool statistics to include LRO packets.
Also use correct message type while configuring interrupt coalescing.
Signed-off-by: NNarender Kumar <narender.kumar@qlogic.com>
Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 8fea0f0d
......@@ -576,7 +576,8 @@ struct netxen_adapter_stats {
u64 rxdropped;
u64 txdropped;
u64 csummed;
u64 no_rcv;
u64 rx_pkts;
u64 lro_pkts;
u64 rxbytes;
u64 txbytes;
};
......@@ -958,7 +959,8 @@ typedef struct {
#define NX_NIC_H2C_OPCODE_PROXY_STOP_DONE 20
#define NX_NIC_H2C_OPCODE_GET_LINKEVENT 21
#define NX_NIC_C2C_OPCODE 22
#define NX_NIC_H2C_OPCODE_LAST 23
#define NX_NIC_H2C_OPCODE_CONFIG_HW_LRO 24
#define NX_NIC_H2C_OPCODE_LAST 25
/*
* Firmware --> Driver
......@@ -984,6 +986,19 @@ typedef struct {
#define VPORT_MISS_MODE_ACCEPT_ALL 1 /* accept all packets */
#define VPORT_MISS_MODE_ACCEPT_MULTI 2 /* accept unmatched multicast */
#define NX_NIC_LRO_REQUEST_FIRST 0
#define NX_NIC_LRO_REQUEST_ADD_FLOW 1
#define NX_NIC_LRO_REQUEST_DELETE_FLOW 2
#define NX_NIC_LRO_REQUEST_TIMER 3
#define NX_NIC_LRO_REQUEST_CLEANUP 4
#define NX_NIC_LRO_REQUEST_ADD_FLOW_SCHEDULED 5
#define NX_TOE_LRO_REQUEST_ADD_FLOW 6
#define NX_TOE_LRO_REQUEST_ADD_FLOW_RESPONSE 7
#define NX_TOE_LRO_REQUEST_DELETE_FLOW 8
#define NX_TOE_LRO_REQUEST_DELETE_FLOW_RESPONSE 9
#define NX_TOE_LRO_REQUEST_TIMER 10
#define NX_NIC_LRO_REQUEST_LAST 11
#define NX_FW_CAPABILITY_LINK_NOTIFICATION (1 << 5)
#define NX_FW_CAPABILITY_SWITCHING (1 << 6)
#define NX_FW_CAPABILITY_PEXQ (1 << 7)
......@@ -1064,6 +1079,7 @@ typedef struct {
#define NETXEN_NIC_MSI_ENABLED 0x02
#define NETXEN_NIC_MSIX_ENABLED 0x04
#define NETXEN_NIC_LRO_ENABLED 0x08
#define NETXEN_IS_MSI_FAMILY(adapter) \
((adapter)->flags & (NETXEN_NIC_MSI_ENABLED | NETXEN_NIC_MSIX_ENABLED))
......@@ -1290,6 +1306,8 @@ void netxen_advert_link_change(struct netxen_adapter *adapter, int linkup);
int nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, int mtu);
int netxen_nic_change_mtu(struct net_device *netdev, int new_mtu);
int netxen_config_hw_lro(struct netxen_adapter *adapter, int enable);
int netxen_send_lro_cleanup(struct netxen_adapter *adapter);
int netxen_nic_set_mac(struct net_device *netdev, void *p);
struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev);
......
......@@ -203,8 +203,6 @@ nx_fw_cmd_create_rx_ctx(struct netxen_adapter *adapter)
cap = (NX_CAP0_LEGACY_CONTEXT | NX_CAP0_LEGACY_MN);
cap |= (NX_CAP0_JUMBO_CONTIGUOUS | NX_CAP0_LRO_CONTIGUOUS);
if (adapter->capabilities & NX_FW_CAPABILITY_HW_LRO)
cap |= NX_CAP0_HW_LRO;
prq->capabilities[0] = cpu_to_le32(cap);
prq->host_int_crb_mode =
......
......@@ -57,7 +57,8 @@ static const struct netxen_nic_stats netxen_nic_gstrings_stats[] = {
{"rx_dropped", NETXEN_NIC_STAT(stats.rxdropped)},
{"tx_dropped", NETXEN_NIC_STAT(stats.txdropped)},
{"csummed", NETXEN_NIC_STAT(stats.csummed)},
{"no_rcv", NETXEN_NIC_STAT(stats.no_rcv)},
{"rx_pkts", NETXEN_NIC_STAT(stats.rx_pkts)},
{"lro_pkts", NETXEN_NIC_STAT(stats.lro_pkts)},
{"rx_bytes", NETXEN_NIC_STAT(stats.rxbytes)},
{"tx_bytes", NETXEN_NIC_STAT(stats.txbytes)},
};
......@@ -941,6 +942,28 @@ static int netxen_get_intr_coalesce(struct net_device *netdev,
return 0;
}
static int netxen_nic_set_flags(struct net_device *netdev, u32 data)
{
struct netxen_adapter *adapter = netdev_priv(netdev);
int hw_lro;
if (!(adapter->capabilities & NX_FW_CAPABILITY_HW_LRO))
return -EINVAL;
ethtool_op_set_flags(netdev, data);
hw_lro = (data & ETH_FLAG_LRO) ? NETXEN_NIC_LRO_ENABLED : 0;
if (netxen_config_hw_lro(adapter, hw_lro))
return -EIO;
if ((hw_lro == 0) && netxen_send_lro_cleanup(adapter))
return -EIO;
return 0;
}
struct ethtool_ops netxen_nic_ethtool_ops = {
.get_settings = netxen_nic_get_settings,
.set_settings = netxen_nic_set_settings,
......@@ -968,4 +991,6 @@ struct ethtool_ops netxen_nic_ethtool_ops = {
.set_rx_csum = netxen_nic_set_rx_csum,
.get_coalesce = netxen_get_intr_coalesce,
.set_coalesce = netxen_set_intr_coalesce,
.get_flags = ethtool_op_get_flags,
.set_flags = netxen_nic_set_flags,
};
......@@ -643,7 +643,7 @@ int netxen_config_intr_coalesce(struct netxen_adapter *adapter)
memset(&req, 0, sizeof(nx_nic_req_t));
req.qhdr = cpu_to_le64(NX_NIC_REQUEST << 23);
req.qhdr = cpu_to_le64(NX_HOST_REQUEST << 23);
word = NETXEN_CONFIG_INTR_COALESCE | ((u64)adapter->portnum << 16);
req.req_hdr = cpu_to_le64(word);
......@@ -659,6 +659,35 @@ int netxen_config_intr_coalesce(struct netxen_adapter *adapter)
return rv;
}
int netxen_config_hw_lro(struct netxen_adapter *adapter, int enable)
{
nx_nic_req_t req;
u64 word;
int rv = 0;
if ((adapter->flags & NETXEN_NIC_LRO_ENABLED) == enable)
return 0;
memset(&req, 0, sizeof(nx_nic_req_t));
req.qhdr = cpu_to_le64(NX_HOST_REQUEST << 23);
word = NX_NIC_H2C_OPCODE_CONFIG_HW_LRO | ((u64)adapter->portnum << 16);
req.req_hdr = cpu_to_le64(word);
req.words[0] = cpu_to_le64(enable);
rv = netxen_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
if (rv != 0) {
printk(KERN_ERR "ERROR. Could not send "
"configure hw lro request\n");
}
adapter->flags ^= NETXEN_NIC_LRO_ENABLED;
return rv;
}
#define RSS_HASHTYPE_IP_TCP 0x3
int netxen_config_rss(struct netxen_adapter *adapter, int enable)
......@@ -752,6 +781,29 @@ int netxen_linkevent_request(struct netxen_adapter *adapter, int enable)
return rv;
}
int netxen_send_lro_cleanup(struct netxen_adapter *adapter)
{
nx_nic_req_t req;
u64 word;
int rv;
memset(&req, 0, sizeof(nx_nic_req_t));
req.qhdr = cpu_to_le64(NX_HOST_REQUEST << 23);
word = NX_NIC_H2C_OPCODE_LRO_REQUEST |
((u64)adapter->portnum << 16) |
((u64)NX_NIC_LRO_REQUEST_CLEANUP << 56) ;
req.req_hdr = cpu_to_le64(word);
rv = netxen_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
if (rv != 0) {
printk(KERN_ERR "%s: could not cleanup lro flows\n",
adapter->netdev->name);
}
return rv;
}
/*
* netxen_nic_change_mtu - Change the Maximum Transfer Unit
* @returns 0 on success, negative on failure
......@@ -2066,6 +2118,8 @@ void netxen_nic_get_firmware_info(struct netxen_adapter *adapter)
if (adapter->fw_version >= NETXEN_VERSION_CODE(4, 0, 222))
adapter->capabilities = NXRD32(adapter, CRB_FW_CAPABILITIES_1);
adapter->flags &= ~NETXEN_NIC_LRO_ENABLED;
}
int
......
......@@ -1277,7 +1277,7 @@ netxen_process_rcv(struct netxen_adapter *adapter,
napi_gro_receive(&sds_ring->napi, skb);
adapter->stats.no_rcv++;
adapter->stats.rx_pkts++;
adapter->stats.rxbytes += length;
return buffer;
......@@ -1350,8 +1350,13 @@ netxen_process_lro(struct netxen_adapter *adapter,
th->psh = push;
th->seq = htonl(seq_number);
length = skb->len;
netif_receive_skb(skb);
adapter->stats.lro_pkts++;
adapter->stats.rxbytes += length;
return buffer;
}
......
......@@ -892,6 +892,9 @@ netxen_nic_up(struct netxen_adapter *adapter, struct net_device *netdev)
if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
netxen_config_intr_coalesce(adapter);
if (adapter->capabilities & NX_FW_CAPABILITY_HW_LRO)
netxen_config_hw_lro(adapter, NETXEN_NIC_LRO_ENABLED);
netxen_napi_enable(adapter);
if (adapter->capabilities & NX_FW_CAPABILITY_LINK_NOTIFICATION)
......@@ -1077,6 +1080,9 @@ netxen_setup_netdev(struct netxen_adapter *adapter,
if (adapter->capabilities & NX_FW_CAPABILITY_FVLANTX)
netdev->features |= (NETIF_F_HW_VLAN_TX);
if (adapter->capabilities & NX_FW_CAPABILITY_HW_LRO)
netdev->features |= NETIF_F_LRO;
netdev->irq = adapter->msix_entries[0].vector;
err = netxen_napi_add(adapter, netdev);
......@@ -1812,7 +1818,7 @@ struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev)
memset(stats, 0, sizeof(*stats));
stats->rx_packets = adapter->stats.no_rcv;
stats->rx_packets = adapter->stats.rx_pkts + adapter->stats.lro_pkts;
stats->tx_packets = adapter->stats.xmitfinished;
stats->rx_bytes = adapter->stats.rxbytes;
stats->tx_bytes = adapter->stats.txbytes;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册