V4L/DVB: Rework for support xc5000

Set correct GPIO number for BEHOLD_WANDER/VOYAGER
Add xc5000 callback function
Small rework tm6000_cards_setup function
Small rework tm6000_config_tuner, build mode_mask by config information
Rework for support xc5000 silicon tuner
Add some information messages for more better understand an errors.

[mchehab@redhat.com: Fix CodingStyle and merge conflicts]
Signed-off-by: NBeholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

drivers/staging/tm6000/tm6000-cards.c

@@ -231,7 +231,9 @@ struct tm6000_board tm6000_boards[] = {
 			.has_remote   = 1,
 		},
 		.gpio = {
-			.tuner_reset	= TM6000_GPIO_2,
+			.tuner_reset	= TM6010_GPIO_0,
+			.demod_reset	= TM6010_GPIO_1,
+			.power_led	= TM6010_GPIO_6,
 		},
 	},
 	[TM6010_BOARD_BEHOLD_VOYAGER] = {
@@ -247,7 +249,8 @@ struct tm6000_board tm6000_boards[] = {
 			.has_remote   = 1,
 		},
 		.gpio = {
-			.tuner_reset	= TM6000_GPIO_2,
+			.tuner_reset	= TM6010_GPIO_0,
+			.power_led	= TM6010_GPIO_6,
 		},
 	},
 	[TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE] = {
@@ -320,6 +323,31 @@ struct usb_device_id tm6000_id_table[] = {
 	{ },
 };
 
+/* Tuner callback to provide the proper gpio changes needed for xc5000 */
+int tm6000_xc5000_callback(void *ptr, int component, int command, int arg)
+{
+	int rc = 0;
+	struct tm6000_core *dev = ptr;
+
+	if (dev->tuner_type != TUNER_XC5000)
+		return 0;
+
+	switch (command) {
+	case XC5000_TUNER_RESET:
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+			       dev->gpio.tuner_reset, 0x01);
+		msleep(15);
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+			       dev->gpio.tuner_reset, 0x00);
+		msleep(15);
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+			       dev->gpio.tuner_reset, 0x01);
+		break;
+	}
+	return (rc);
+}
+
+
 /* Tuner callback to provide the proper gpio changes needed for xc2028 */
 
 int tm6000_tuner_callback(void *ptr, int component, int command, int arg)
@@ -454,6 +482,21 @@ int tm6000_cards_setup(struct tm6000_core *dev)
 		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00);
 		msleep(15);
 		break;
+	case TM6010_BOARD_BEHOLD_WANDER:
+		/* Power led on (blue) */
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01);
+		msleep(15);
+		/* Reset zarlink zl10353 */
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x00);
+		msleep(50);
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x01);
+		msleep(15);
+		break;
+	case TM6010_BOARD_BEHOLD_VOYAGER:
+		/* Power led on (blue) */
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01);
+		msleep(15);
+		break;
 	default:
 		break;
 	}
@@ -465,41 +508,34 @@ int tm6000_cards_setup(struct tm6000_core *dev)
 	 * If a device uses a different sequence or different GPIO pins for
 	 * reset, just add the code at the board-specific part
 	 */
-	for (i = 0; i < 2; i++) {
-		rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
-					dev->gpio.tuner_reset, 0x00);
-		if (rc < 0) {
-			printk(KERN_ERR "Error %i doing GPIO1 reset\n", rc);
-			return rc;
-		}
-
-		msleep(10); /* Just to be conservative */
-		rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
-					dev->gpio.tuner_reset, 0x01);
-		if (rc < 0) {
-			printk(KERN_ERR "Error %i doing GPIO1 reset\n", rc);
-			return rc;
-		}
 
-		msleep(10);
-		rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_4, 0);
-		if (rc < 0) {
-			printk(KERN_ERR "Error %i doing GPIO4 reset\n", rc);
-			return rc;
-		}
+	if (dev->gpio.tuner_reset) {
+		for (i = 0; i < 2; i++) {
+			rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+						dev->gpio.tuner_reset, 0x00);
+			if (rc < 0) {
+				printk(KERN_ERR "Error %i doing tuner reset\n", rc);
+				return rc;
+			}
 
-		msleep(10);
-		rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_4, 1);
-		if (rc < 0) {
-			printk(KERN_ERR "Error %i doing GPIO4 reset\n", rc);
-			return rc;
-		}
+			msleep(10); /* Just to be conservative */
+			rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+						dev->gpio.tuner_reset, 0x01);
+			if (rc < 0) {
+				printk(KERN_ERR "Error %i doing tuner reset\n", rc);
+				return rc;
+			}
+			msleep(10);
 
-		if (!i) {
-			rc = tm6000_get_reg32(dev, REQ_40_GET_VERSION, 0, 0);
-			if (rc >= 0)
-				printk(KERN_DEBUG "board=0x%08x\n", rc);
+			if (!i) {
+				rc = tm6000_get_reg32(dev, REQ_40_GET_VERSION, 0, 0);
+				if (rc >= 0)
+					printk(KERN_DEBUG "board=0x%08x\n", rc);
+			}
 		}
+	} else {
+		printk(KERN_ERR "Tuner reset is not configured\n");
+		return -1;
 	}
 
 	msleep(50);
@@ -518,12 +554,26 @@ static void tm6000_config_tuner(struct tm6000_core *dev)
 	memset(&tun_setup, 0, sizeof(tun_setup));
 	tun_setup.type = dev->tuner_type;
 	tun_setup.addr = dev->tuner_addr;
-	tun_setup.mode_mask = T_ANALOG_TV | T_RADIO | T_DIGITAL_TV;
-	tun_setup.tuner_callback = tm6000_tuner_callback;
+
+	tun_setup.mode_mask = 0;
+	if (dev->caps.has_tuner)
+		tun_setup.mode_mask |= (T_ANALOG_TV | T_RADIO);
+	if (dev->caps.has_dvb)
+		tun_setup.mode_mask |= T_DIGITAL_TV;
+
+	switch (dev->tuner_type) {
+	case TUNER_XC2028:
+		tun_setup.tuner_callback = tm6000_tuner_callback;;
+		break;
+	case TUNER_XC5000:
+		tun_setup.tuner_callback = tm6000_xc5000_callback;
+		break;
+	}
 
 	v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
 
-	if (dev->tuner_type == TUNER_XC2028) {
+	switch (dev->tuner_type) {
+	case TUNER_XC2028: {
 		struct v4l2_priv_tun_config xc2028_cfg;
 		struct xc2028_ctrl ctl;
 
@@ -553,9 +603,31 @@ static void tm6000_config_tuner(struct tm6000_core *dev)
 		}
 
 		printk(KERN_INFO "Setting firmware parameters for xc2028\n");
-
 		v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config,
 				     &xc2028_cfg);
+
+		}
+		break;
+	case TUNER_XC5000:
+		{
+		struct v4l2_priv_tun_config  xc5000_cfg;
+		struct xc5000_config ctl = {
+			.i2c_address = dev->tuner_addr,
+			.if_khz      = 4570,
+			.radio_input = XC5000_RADIO_FM1,
+			};
+
+		xc5000_cfg.tuner = TUNER_XC5000;
+		xc5000_cfg.priv  = &ctl;
+
+
+		v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config,
+				     &xc5000_cfg);
+		}
+		break;
+	default:
+		printk(KERN_INFO "Unknown tuner type. Tuner is not configured.\n");
+		break;
 	}
 }
 

drivers/staging/tm6000/tm6000.h

@@ -222,6 +222,7 @@ struct tm6000_fh {
 /* In tm6000-cards.c */
 
 int tm6000_tuner_callback (void *ptr, int component, int command, int arg);
+int tm6000_xc5000_callback (void *ptr, int component, int command, int arg);
 int tm6000_cards_setup(struct tm6000_core *dev);
 
 /* In tm6000-core.c */