bnx2x: Fix port type display

Display the current media type connected to the port in ethtool.
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/bnx2x/bnx2x.h

@@ -1492,7 +1492,7 @@ void bnx2x_invalidate_e1h_mc_list(struct bnx2x *bp);
 void bnx2x_invalidate_uc_list(struct bnx2x *bp);
 
 void bnx2x_update_coalesce(struct bnx2x *bp);
-int bnx2x_get_link_cfg_idx(struct bnx2x *bp);
+int bnx2x_get_cur_phy_idx(struct bnx2x *bp);
 
 static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms,
 			   int wait)

drivers/net/bnx2x/bnx2x_cmn.c

@@ -2803,6 +2803,55 @@ static int bnx2x_reload_if_running(struct net_device *dev)
 	return bnx2x_nic_load(bp, LOAD_NORMAL);
 }
 
+int bnx2x_get_cur_phy_idx(struct bnx2x *bp)
+{
+	u32 sel_phy_idx = 0;
+	if (bp->link_params.num_phys <= 1)
+		return INT_PHY;
+
+	if (bp->link_vars.link_up) {
+		sel_phy_idx = EXT_PHY1;
+		/* In case link is SERDES, check if the EXT_PHY2 is the one */
+		if ((bp->link_vars.link_status & LINK_STATUS_SERDES_LINK) &&
+		    (bp->link_params.phy[EXT_PHY2].supported & SUPPORTED_FIBRE))
+			sel_phy_idx = EXT_PHY2;
+	} else {
+
+		switch (bnx2x_phy_selection(&bp->link_params)) {
+		case PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT:
+		case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY:
+		case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY:
+		       sel_phy_idx = EXT_PHY1;
+		       break;
+		case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY:
+		case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY:
+		       sel_phy_idx = EXT_PHY2;
+		       break;
+		}
+	}
+
+	return sel_phy_idx;
+
+}
+int bnx2x_get_link_cfg_idx(struct bnx2x *bp)
+{
+	u32 sel_phy_idx = bnx2x_get_cur_phy_idx(bp);
+	/*
+	 * The selected actived PHY is always after swapping (in case PHY
+	 * swapping is enabled). So when swapping is enabled, we need to reverse
+	 * the configuration
+	 */
+
+	if (bp->link_params.multi_phy_config &
+	    PORT_HW_CFG_PHY_SWAPPED_ENABLED) {
+		if (sel_phy_idx == EXT_PHY1)
+			sel_phy_idx = EXT_PHY2;
+		else if (sel_phy_idx == EXT_PHY2)
+			sel_phy_idx = EXT_PHY1;
+	}
+	return LINK_CONFIG_IDX(sel_phy_idx);
+}
+
 /* called with rtnl_lock */
 int bnx2x_change_mtu(struct net_device *dev, int new_mtu)
 {

drivers/net/bnx2x/bnx2x_cmn.h

@@ -1063,6 +1063,8 @@ static inline void bnx2x_init_fcoe_fp(struct bnx2x *bp)
 }
 #endif
 
+int bnx2x_get_link_cfg_idx(struct bnx2x *bp);
+
 static inline void __storm_memset_struct(struct bnx2x *bp,
 					 u32 addr, size_t size, u32 *data)
 {

drivers/net/bnx2x/bnx2x_ethtool.c

@@ -162,6 +162,33 @@ static const struct {
 };
 
 #define BNX2X_NUM_STATS		ARRAY_SIZE(bnx2x_stats_arr)
+static int bnx2x_get_port_type(struct bnx2x *bp)
+{
+	int port_type;
+	u32 phy_idx = bnx2x_get_cur_phy_idx(bp);
+	switch (bp->link_params.phy[phy_idx].media_type) {
+	case ETH_PHY_SFP_FIBER:
+	case ETH_PHY_XFP_FIBER:
+	case ETH_PHY_KR:
+	case ETH_PHY_CX4:
+		port_type = PORT_FIBRE;
+		break;
+	case ETH_PHY_DA_TWINAX:
+		port_type = PORT_DA;
+		break;
+	case ETH_PHY_BASE_T:
+		port_type = PORT_TP;
+		break;
+	case ETH_PHY_NOT_PRESENT:
+		port_type = PORT_NONE;
+		break;
+	case ETH_PHY_UNSPECIFIED:
+	default:
+		port_type = PORT_OTHER;
+		break;
+	}
+	return port_type;
+}
 
 static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
@@ -188,12 +215,7 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	if (IS_MF(bp))
 		ethtool_cmd_speed_set(cmd, bnx2x_get_mf_speed(bp));
 
-	if (bp->port.supported[cfg_idx] & SUPPORTED_TP)
-		cmd->port = PORT_TP;
-	else if (bp->port.supported[cfg_idx] & SUPPORTED_FIBRE)
-		cmd->port = PORT_FIBRE;
-	else
-		BNX2X_ERR("XGXS PHY Failure detected\n");
+	cmd->port = bnx2x_get_port_type(bp);
 
 	cmd->phy_address = bp->mdio.prtad;
 	cmd->transceiver = XCVR_INTERNAL;

drivers/net/bnx2x/bnx2x_hsi.h

@@ -263,7 +263,17 @@ struct port_hw_cfg {			    /* port 0: 0x12c  port 1: 0x2bc */
 #define PORT_HW_CFG_FAULT_MODULE_LED_GPIO2		      0x00000200
 #define PORT_HW_CFG_FAULT_MODULE_LED_GPIO3		      0x00000300
 #define PORT_HW_CFG_FAULT_MODULE_LED_DISABLED		      0x00000400
-	u32 Reserved01[12];				    /* 0x158 */
+	u32 Reserved01[11];				    /* 0x158 */
+
+	u32 media_type;					/* 0x194 */
+#define PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK		      0x000000FF
+#define PORT_HW_CFG_MEDIA_TYPE_PHY0_SHIFT		      0
+
+#define PORT_HW_CFG_MEDIA_TYPE_PHY1_MASK		      0x0000FF00
+#define PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT		      8
+
+#define PORT_HW_CFG_MEDIA_TYPE_PHY2_MASK		      0x00FF0000
+#define PORT_HW_CFG_MEDIA_TYPE_PHY2_SHIFT		      16
 	/*  for external PHY, or forced mode or during AN */
 	u16 xgxs_config_rx[4];				    /* 0x198 */
 

drivers/net/bnx2x/bnx2x_link.c

@@ -1618,7 +1618,7 @@ void bnx2x_link_status_update(struct link_params *params,
 	struct bnx2x *bp = params->bp;
 	u8 link_10g;
 	u8 port = params->port;
-
+	u32 sync_offset, media_types;
 	vars->link_status = REG_RD(bp, params->shmem_base +
 				   offsetof(struct shmem_region,
 					    port_mb[port].link_status));
@@ -1731,6 +1731,23 @@ void bnx2x_link_status_update(struct link_params *params,
 		vars->mac_type = MAC_TYPE_NONE;
 	}
 
+	/* Sync media type */
+	sync_offset = params->shmem_base +
+			offsetof(struct shmem_region,
+				 dev_info.port_hw_config[port].media_type);
+	media_types = REG_RD(bp, sync_offset);
+
+	params->phy[INT_PHY].media_type =
+		(media_types & PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK) >>
+		PORT_HW_CFG_MEDIA_TYPE_PHY0_SHIFT;
+	params->phy[EXT_PHY1].media_type =
+		(media_types & PORT_HW_CFG_MEDIA_TYPE_PHY1_MASK) >>
+		PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT;
+	params->phy[EXT_PHY2].media_type =
+		(media_types & PORT_HW_CFG_MEDIA_TYPE_PHY2_MASK) >>
+		PORT_HW_CFG_MEDIA_TYPE_PHY2_SHIFT;
+	DP(NETIF_MSG_LINK, "media_types = 0x%x\n", media_types);
+
 	DP(NETIF_MSG_LINK, "link_status 0x%x  phy_link_up %x\n",
 		 vars->link_status, vars->phy_link_up);
 	DP(NETIF_MSG_LINK, "line_speed %x  duplex %x  flow_ctrl 0x%x\n",
@@ -3247,7 +3264,9 @@ u8 bnx2x_test_link(struct link_params *params, struct link_vars *vars,
 			serdes_phy_type = ((params->phy[phy_index].media_type ==
 					    ETH_PHY_SFP_FIBER) ||
 					   (params->phy[phy_index].media_type ==
-					    ETH_PHY_XFP_FIBER));
+					    ETH_PHY_XFP_FIBER) ||
+					   (params->phy[phy_index].media_type ==
+					    ETH_PHY_DA_TWINAX));
 
 			if (is_serdes != serdes_phy_type)
 				continue;
@@ -4679,9 +4698,11 @@ static u8 bnx2x_get_edc_mode(struct bnx2x_phy *phy,
 			     u16 *edc_mode)
 {
 	struct bnx2x *bp = params->bp;
+	u32 sync_offset = 0, phy_idx, media_types;
 	u8 val, check_limiting_mode = 0;
 	*edc_mode = EDC_MODE_LIMITING;
 
+	phy->media_type = ETH_PHY_UNSPECIFIED;
 	/* First check for copper cable */
 	if (bnx2x_read_sfp_module_eeprom(phy,
 					 params,
@@ -4696,7 +4717,7 @@ static u8 bnx2x_get_edc_mode(struct bnx2x_phy *phy,
 	case SFP_EEPROM_CON_TYPE_VAL_COPPER:
 	{
 		u8 copper_module_type;
-
+		phy->media_type = ETH_PHY_DA_TWINAX;
 		/*
 		 * Check if its active cable (includes SFP+ module)
 		 * of passive cable
@@ -4731,6 +4752,7 @@ static u8 bnx2x_get_edc_mode(struct bnx2x_phy *phy,
 		break;
 	}
 	case SFP_EEPROM_CON_TYPE_VAL_LC:
+		phy->media_type = ETH_PHY_SFP_FIBER;
 		DP(NETIF_MSG_LINK, "Optic module detected\n");
 		check_limiting_mode = 1;
 		break;
@@ -4739,7 +4761,22 @@ static u8 bnx2x_get_edc_mode(struct bnx2x_phy *phy,
 			 val);
 		return -EINVAL;
 	}
-
+	sync_offset = params->shmem_base +
+		offsetof(struct shmem_region,
+			 dev_info.port_hw_config[params->port].media_type);
+	media_types = REG_RD(bp, sync_offset);
+	/* Update media type for non-PMF sync */
+	for (phy_idx = INT_PHY; phy_idx < MAX_PHYS; phy_idx++) {
+		if (&(params->phy[phy_idx]) == phy) {
+			media_types &= ~(PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK <<
+				(PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT * phy_idx));
+			media_types |= ((phy->media_type &
+					PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK) <<
+				(PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT * phy_idx));
+			break;
+		}
+	}
+	REG_WR(bp, sync_offset, media_types);
 	if (check_limiting_mode) {
 		u8 options[SFP_EEPROM_OPTIONS_SIZE];
 		if (bnx2x_read_sfp_module_eeprom(phy,
@@ -5156,6 +5193,7 @@ void bnx2x_handle_module_detect_int(struct link_params *params)
 		 * Module was plugged out.
 		 * Disable transmit for this module
 		 */
+		phy->media_type = ETH_PHY_NOT_PRESENT;
 		if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) ==
 		    PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER)
 			bnx2x_sfp_set_transmitter(params, phy, 0);
@@ -5764,7 +5802,7 @@ static void bnx2x_8727_handle_mod_abs(struct bnx2x_phy *phy,
 		/* Module is absent */
 		DP(NETIF_MSG_LINK, "MOD_ABS indication "
 			    "show module is absent\n");
-
+		phy->media_type = ETH_PHY_NOT_PRESENT;
 		/*
 		 * 1. Set mod_abs to detect next module
 		 *    presence event
@@ -6877,7 +6915,7 @@ static struct bnx2x_phy phy_serdes = {
 			   SUPPORTED_Autoneg |
 			   SUPPORTED_Pause |
 			   SUPPORTED_Asym_Pause),
-	.media_type	= ETH_PHY_UNSPECIFIED,
+	.media_type	= ETH_PHY_BASE_T,
 	.ver_addr	= 0,
 	.req_flow_ctrl	= 0,
 	.req_line_speed	= 0,
@@ -6914,7 +6952,7 @@ static struct bnx2x_phy phy_xgxs = {
 			   SUPPORTED_Autoneg |
 			   SUPPORTED_Pause |
 			   SUPPORTED_Asym_Pause),
-	.media_type	= ETH_PHY_UNSPECIFIED,
+	.media_type	= ETH_PHY_CX4,
 	.ver_addr	= 0,
 	.req_flow_ctrl	= 0,
 	.req_line_speed	= 0,
@@ -6977,7 +7015,7 @@ static struct bnx2x_phy phy_8073 = {
 			   SUPPORTED_Autoneg |
 			   SUPPORTED_Pause |
 			   SUPPORTED_Asym_Pause),
-	.media_type	= ETH_PHY_UNSPECIFIED,
+	.media_type	= ETH_PHY_KR,
 	.ver_addr	= 0,
 	.req_flow_ctrl	= 0,
 	.req_line_speed	= 0,
@@ -7069,7 +7107,7 @@ static struct bnx2x_phy phy_8726 = {
 			   SUPPORTED_FIBRE |
 			   SUPPORTED_Pause |
 			   SUPPORTED_Asym_Pause),
-	.media_type	= ETH_PHY_SFP_FIBER,
+	.media_type	= ETH_PHY_NOT_PRESENT,
 	.ver_addr	= 0,
 	.req_flow_ctrl	= 0,
 	.req_line_speed	= 0,
@@ -7100,7 +7138,7 @@ static struct bnx2x_phy phy_8727 = {
 			   SUPPORTED_FIBRE |
 			   SUPPORTED_Pause |
 			   SUPPORTED_Asym_Pause),
-	.media_type	= ETH_PHY_SFP_FIBER,
+	.media_type	= ETH_PHY_NOT_PRESENT,
 	.ver_addr	= 0,
 	.req_flow_ctrl	= 0,
 	.req_line_speed	= 0,
@@ -7565,7 +7603,7 @@ u32 bnx2x_phy_selection(struct link_params *params)
 u8 bnx2x_phy_probe(struct link_params *params)
 {
 	u8 phy_index, actual_phy_idx, link_cfg_idx;
-	u32 phy_config_swapped;
+	u32 phy_config_swapped, sync_offset, media_types;
 	struct bnx2x *bp = params->bp;
 	struct bnx2x_phy *phy;
 	params->num_phys = 0;
@@ -7602,6 +7640,26 @@ u8 bnx2x_phy_probe(struct link_params *params)
 		if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN)
 			break;
 
+		sync_offset = params->shmem_base +
+			offsetof(struct shmem_region,
+			dev_info.port_hw_config[params->port].media_type);
+		media_types = REG_RD(bp, sync_offset);
+
+		/*
+		 * Update media type for non-PMF sync only for the first time
+		 * In case the media type changes afterwards, it will be updated
+		 * using the update_status function
+		 */
+		if ((media_types & (PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK <<
+				    (PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT *
+				     actual_phy_idx))) == 0) {
+			media_types |= ((phy->media_type &
+					PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK) <<
+				(PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT *
+				 actual_phy_idx));
+		}
+		REG_WR(bp, sync_offset, media_types);
+
 		bnx2x_phy_def_cfg(params, phy, phy_index);
 		params->num_phys++;
 	}

drivers/net/bnx2x/bnx2x_link.h

@@ -153,6 +153,8 @@ struct bnx2x_phy {
 #define	ETH_PHY_XFP_FIBER   0x2
 #define	ETH_PHY_DA_TWINAX   0x3
 #define	ETH_PHY_BASE_T      0x4
+#define	ETH_PHY_KR	    0xf0
+#define	ETH_PHY_CX4	    0xf1
 #define	ETH_PHY_NOT_PRESENT 0xff
 
 	/* The address in which version is located*/

drivers/net/bnx2x/bnx2x_main.c

@@ -1732,45 +1732,6 @@ static int bnx2x_set_spio(struct bnx2x *bp, int spio_num, u32 mode)
 	return 0;
 }
 
-int bnx2x_get_link_cfg_idx(struct bnx2x *bp)
-{
-	u32 sel_phy_idx = 0;
-	if (bp->link_vars.link_up) {
-		sel_phy_idx = EXT_PHY1;
-		/* In case link is SERDES, check if the EXT_PHY2 is the one */
-		if ((bp->link_vars.link_status & LINK_STATUS_SERDES_LINK) &&
-		    (bp->link_params.phy[EXT_PHY2].supported & SUPPORTED_FIBRE))
-			sel_phy_idx = EXT_PHY2;
-	} else {
-
-		switch (bnx2x_phy_selection(&bp->link_params)) {
-		case PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT:
-		case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY:
-		case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY:
-		       sel_phy_idx = EXT_PHY1;
-		       break;
-		case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY:
-		case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY:
-		       sel_phy_idx = EXT_PHY2;
-		       break;
-		}
-	}
-	/*
-	* The selected actived PHY is always after swapping (in case PHY
-	* swapping is enabled). So when swapping is enabled, we need to reverse
-	* the configuration
-	*/
-
-	if (bp->link_params.multi_phy_config &
-	    PORT_HW_CFG_PHY_SWAPPED_ENABLED) {
-		if (sel_phy_idx == EXT_PHY1)
-			sel_phy_idx = EXT_PHY2;
-		else if (sel_phy_idx == EXT_PHY2)
-			sel_phy_idx = EXT_PHY1;
-	}
-	return LINK_CONFIG_IDX(sel_phy_idx);
-}
-
 void bnx2x_calc_fc_adv(struct bnx2x *bp)
 {
 	u8 cfg_idx = bnx2x_get_link_cfg_idx(bp);