提交 1a4aa920 编写于 作者: M Mauro Carvalho Chehab

[media] cx231xx: properly use the right tuner i2c address

The driver has a field to indicate what bus is used by tuner and
by demod. However, this field were never used. On Pixelview,
it uses I2C 2 for tuner, instead of I2C 1.

	drivers/media/video/cx231xx/cx231xx-cards.c
Acked-by: NSri Deevi <Srinivasa.Deevi@conexant.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 24c80b65
......@@ -569,7 +569,7 @@ void cx231xx_card_setup(struct cx231xx *dev)
/* Initialize the tuner */
if (dev->board.tuner_type != TUNER_ABSENT) {
dev->sd_tuner = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[1].i2c_adap,
&dev->i2c_bus[dev->board.tuner_i2c_master].i2c_adap,
"tuner", "tuner",
dev->tuner_addr, NULL);
if (dev->sd_tuner == NULL)
......
......@@ -347,7 +347,7 @@ static int attach_xc5000(u8 addr, struct cx231xx *dev)
struct xc5000_config cfg;
memset(&cfg, 0, sizeof(cfg));
cfg.i2c_adap = &dev->i2c_bus[1].i2c_adap;
cfg.i2c_adap = &dev->i2c_bus[dev->board.tuner_i2c_master].i2c_adap;
cfg.i2c_addr = addr;
if (!dev->dvb->frontend) {
......@@ -573,7 +573,7 @@ static int dvb_init(struct cx231xx *dev)
dev->dvb->frontend = dvb_attach(s5h1432_attach,
&dvico_s5h1432_config,
&dev->i2c_bus[2].i2c_adap);
&dev->i2c_bus[dev->board.demod_i2c_master].i2c_adap);
if (dev->dvb->frontend == NULL) {
printk(DRIVER_NAME
......@@ -586,7 +586,7 @@ static int dvb_init(struct cx231xx *dev)
dvb->frontend->callback = cx231xx_tuner_callback;
if (!dvb_attach(xc5000_attach, dev->dvb->frontend,
&dev->i2c_bus[1].i2c_adap,
&dev->i2c_bus[dev->board.tuner_i2c_master].i2c_adap,
&cnxt_rde250_tunerconfig)) {
result = -EINVAL;
goto out_free;
......@@ -598,7 +598,7 @@ static int dvb_init(struct cx231xx *dev)
dev->dvb->frontend = dvb_attach(s5h1411_attach,
&xc5000_s5h1411_config,
&dev->i2c_bus[2].i2c_adap);
&dev->i2c_bus[dev->board.demod_i2c_master].i2c_adap);
if (dev->dvb->frontend == NULL) {
printk(DRIVER_NAME
......@@ -611,7 +611,7 @@ static int dvb_init(struct cx231xx *dev)
dvb->frontend->callback = cx231xx_tuner_callback;
if (!dvb_attach(xc5000_attach, dev->dvb->frontend,
&dev->i2c_bus[1].i2c_adap,
&dev->i2c_bus[dev->board.tuner_i2c_master].i2c_adap,
&cnxt_rdu250_tunerconfig)) {
result = -EINVAL;
goto out_free;
......@@ -621,7 +621,7 @@ static int dvb_init(struct cx231xx *dev)
dev->dvb->frontend = dvb_attach(s5h1432_attach,
&dvico_s5h1432_config,
&dev->i2c_bus[2].i2c_adap);
&dev->i2c_bus[dev->board.demod_i2c_master].i2c_adap);
if (dev->dvb->frontend == NULL) {
printk(DRIVER_NAME
......@@ -634,7 +634,7 @@ static int dvb_init(struct cx231xx *dev)
dvb->frontend->callback = cx231xx_tuner_callback;
if (!dvb_attach(tda18271_attach, dev->dvb->frontend,
0x60, &dev->i2c_bus[1].i2c_adap,
0x60, &dev->i2c_bus[dev->board.tuner_i2c_master].i2c_adap,
&cnxt_rde253s_tunerconfig)) {
result = -EINVAL;
goto out_free;
......@@ -644,7 +644,7 @@ static int dvb_init(struct cx231xx *dev)
dev->dvb->frontend = dvb_attach(s5h1411_attach,
&tda18271_s5h1411_config,
&dev->i2c_bus[2].i2c_adap);
&dev->i2c_bus[dev->board.demod_i2c_master].i2c_adap);
if (dev->dvb->frontend == NULL) {
printk(DRIVER_NAME
......@@ -657,7 +657,7 @@ static int dvb_init(struct cx231xx *dev)
dvb->frontend->callback = cx231xx_tuner_callback;
if (!dvb_attach(tda18271_attach, dev->dvb->frontend,
0x60, &dev->i2c_bus[1].i2c_adap,
0x60, &dev->i2c_bus[dev->board.tuner_i2c_master].i2c_adap,
&cnxt_rde253s_tunerconfig)) {
result = -EINVAL;
goto out_free;
......@@ -666,11 +666,11 @@ static int dvb_init(struct cx231xx *dev)
case CX231XX_BOARD_HAUPPAUGE_EXETER:
printk(KERN_INFO "%s: looking for tuner / demod on i2c bus: %d\n",
__func__, i2c_adapter_id(&dev->i2c_bus[1].i2c_adap));
__func__, i2c_adapter_id(&dev->i2c_bus[dev->board.tuner_i2c_master].i2c_adap));
dev->dvb->frontend = dvb_attach(lgdt3305_attach,
&hcw_lgdt3305_config,
&dev->i2c_bus[1].i2c_adap);
&dev->i2c_bus[dev->board.tuner_i2c_master].i2c_adap);
if (dev->dvb->frontend == NULL) {
printk(DRIVER_NAME
......@@ -683,7 +683,7 @@ static int dvb_init(struct cx231xx *dev)
dvb->frontend->callback = cx231xx_tuner_callback;
dvb_attach(tda18271_attach, dev->dvb->frontend,
0x60, &dev->i2c_bus[1].i2c_adap,
0x60, &dev->i2c_bus[dev->board.tuner_i2c_master].i2c_adap,
&hcw_tda18271_config);
break;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册