Merge tag 'kvm-arm-for-4.4' of...

Merge tag 'kvm-arm-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/ARM Changes for v4.4-rc1

Includes a number of fixes for the arch-timer, introducing proper
level-triggered semantics for the arch-timers, a series of patches to
synchronously halt a guest (prerequisite for IRQ forwarding), some tracepoint
improvements, a tweak for the EL2 panic handlers, some more VGIC cleanups
getting rid of redundant state, and finally a stylistic change that gets rid of
some ctags warnings.

Conflicts:
	arch/x86/include/asm/kvm_host.h

Documentation/virtual/kvm/arm/vgic-mapped-irqs.txt

+KVM/ARM VGIC Forwarded Physical Interrupts
+==========================================
+
+The KVM/ARM code implements software support for the ARM Generic
+Interrupt Controller's (GIC's) hardware support for virtualization by
+allowing software to inject virtual interrupts to a VM, which the guest
+OS sees as regular interrupts.  The code is famously known as the VGIC.
+
+Some of these virtual interrupts, however, correspond to physical
+interrupts from real physical devices.  One example could be the
+architected timer, which itself supports virtualization, and therefore
+lets a guest OS program the hardware device directly to raise an
+interrupt at some point in time.  When such an interrupt is raised, the
+host OS initially handles the interrupt and must somehow signal this
+event as a virtual interrupt to the guest.  Another example could be a
+passthrough device, where the physical interrupts are initially handled
+by the host, but the device driver for the device lives in the guest OS
+and KVM must therefore somehow inject a virtual interrupt on behalf of
+the physical one to the guest OS.
+
+These virtual interrupts corresponding to a physical interrupt on the
+host are called forwarded physical interrupts, but are also sometimes
+referred to as 'virtualized physical interrupts' and 'mapped interrupts'.
+
+Forwarded physical interrupts are handled slightly differently compared
+to virtual interrupts generated purely by a software emulated device.
+
+
+The HW bit
+----------
+Virtual interrupts are signalled to the guest by programming the List
+Registers (LRs) on the GIC before running a VCPU.  The LR is programmed
+with the virtual IRQ number and the state of the interrupt (Pending,
+Active, or Pending+Active).  When the guest ACKs and EOIs a virtual
+interrupt, the LR state moves from Pending to Active, and finally to
+inactive.
+
+The LRs include an extra bit, called the HW bit.  When this bit is set,
+KVM must also program an additional field in the LR, the physical IRQ
+number, to link the virtual with the physical IRQ.
+
+When the HW bit is set, KVM must EITHER set the Pending OR the Active
+bit, never both at the same time.
+
+Setting the HW bit causes the hardware to deactivate the physical
+interrupt on the physical distributor when the guest deactivates the
+corresponding virtual interrupt.
+
+
+Forwarded Physical Interrupts Life Cycle
+----------------------------------------
+
+The state of forwarded physical interrupts is managed in the following way:
+
+  - The physical interrupt is acked by the host, and becomes active on
+    the physical distributor (*).
+  - KVM sets the LR.Pending bit, because this is the only way the GICV
+    interface is going to present it to the guest.
+  - LR.Pending will stay set as long as the guest has not acked the interrupt.
+  - LR.Pending transitions to LR.Active on the guest read of the IAR, as
+    expected.
+  - On guest EOI, the *physical distributor* active bit gets cleared,
+    but the LR.Active is left untouched (set).
+  - KVM clears the LR on VM exits when the physical distributor
+    active state has been cleared.
+
+(*): The host handling is slightly more complicated.  For some forwarded
+interrupts (shared), KVM directly sets the active state on the physical
+distributor before entering the guest, because the interrupt is never actually
+handled on the host (see details on the timer as an example below).  For other
+forwarded interrupts (non-shared) the host does not deactivate the interrupt
+when the host ISR completes, but leaves the interrupt active until the guest
+deactivates it.  Leaving the interrupt active is allowed, because Linux
+configures the physical GIC with EOIMode=1, which causes EOI operations to
+perform a priority drop allowing the GIC to receive other interrupts of the
+default priority.
+
+
+Forwarded Edge and Level Triggered PPIs and SPIs
+------------------------------------------------
+Forwarded physical interrupts injected should always be active on the
+physical distributor when injected to a guest.
+
+Level-triggered interrupts will keep the interrupt line to the GIC
+asserted, typically until the guest programs the device to deassert the
+line.  This means that the interrupt will remain pending on the physical
+distributor until the guest has reprogrammed the device.  Since we
+always run the VM with interrupts enabled on the CPU, a pending
+interrupt will exit the guest as soon as we switch into the guest,
+preventing the guest from ever making progress as the process repeats
+over and over.  Therefore, the active state on the physical distributor
+must be set when entering the guest, preventing the GIC from forwarding
+the pending interrupt to the CPU.  As soon as the guest deactivates the
+interrupt, the physical line is sampled by the hardware again and the host
+takes a new interrupt if and only if the physical line is still asserted.
+
+Edge-triggered interrupts do not exhibit the same problem with
+preventing guest execution that level-triggered interrupts do.  One
+option is to not use HW bit at all, and inject edge-triggered interrupts
+from a physical device as pure virtual interrupts.  But that would
+potentially slow down handling of the interrupt in the guest, because a
+physical interrupt occurring in the middle of the guest ISR would
+preempt the guest for the host to handle the interrupt.  Additionally,
+if you configure the system to handle interrupts on a separate physical
+core from that running your VCPU, you still have to interrupt the VCPU
+to queue the pending state onto the LR, even though the guest won't use
+this information until the guest ISR completes.  Therefore, the HW
+bit should always be set for forwarded edge-triggered interrupts.  With
+the HW bit set, the virtual interrupt is injected and additional
+physical interrupts occurring before the guest deactivates the interrupt
+simply mark the state on the physical distributor as Pending+Active.  As
+soon as the guest deactivates the interrupt, the host takes another
+interrupt if and only if there was a physical interrupt between injecting
+the forwarded interrupt to the guest and the guest deactivating the
+interrupt.
+
+Consequently, whenever we schedule a VCPU with one or more LRs with the
+HW bit set, the interrupt must also be active on the physical
+distributor.
+
+
+Forwarded LPIs
+--------------
+LPIs, introduced in GICv3, are always edge-triggered and do not have an
+active state.  They become pending when a device signal them, and as
+soon as they are acked by the CPU, they are inactive again.
+
+It therefore doesn't make sense, and is not supported, to set the HW bit
+for physical LPIs that are forwarded to a VM as virtual interrupts,
+typically virtual SPIs.
+
+For LPIs, there is no other choice than to preempt the VCPU thread if
+necessary, and queue the pending state onto the LR.
+
+
+Putting It Together: The Architected Timer
+------------------------------------------
+The architected timer is a device that signals interrupts with level
+triggered semantics.  The timer hardware is directly accessed by VCPUs
+which program the timer to fire at some point in time.  Each VCPU on a
+system programs the timer to fire at different times, and therefore the
+hardware is multiplexed between multiple VCPUs.  This is implemented by
+context-switching the timer state along with each VCPU thread.
+
+However, this means that a scenario like the following is entirely
+possible, and in fact, typical:
+
+1.  KVM runs the VCPU
+2.  The guest programs the time to fire in T+100
+3.  The guest is idle and calls WFI (wait-for-interrupts)
+4.  The hardware traps to the host
+5.  KVM stores the timer state to memory and disables the hardware timer
+6.  KVM schedules a soft timer to fire in T+(100 - time since step 2)
+7.  KVM puts the VCPU thread to sleep (on a waitqueue)
+8.  The soft timer fires, waking up the VCPU thread
+9.  KVM reprograms the timer hardware with the VCPU's values
+10. KVM marks the timer interrupt as active on the physical distributor
+11. KVM injects a forwarded physical interrupt to the guest
+12. KVM runs the VCPU
+
+Notice that KVM injects a forwarded physical interrupt in step 11 without
+the corresponding interrupt having actually fired on the host.  That is
+exactly why we mark the timer interrupt as active in step 10, because
+the active state on the physical distributor is part of the state
+belonging to the timer hardware, which is context-switched along with
+the VCPU thread.
+
+If the guest does not idle because it is busy, the flow looks like this
+instead:
+
+1.  KVM runs the VCPU
+2.  The guest programs the time to fire in T+100
+4.  At T+100 the timer fires and a physical IRQ causes the VM to exit
+    (note that this initially only traps to EL2 and does not run the host ISR
+    until KVM has returned to the host).
+5.  With interrupts still disabled on the CPU coming back from the guest, KVM
+    stores the virtual timer state to memory and disables the virtual hw timer.
+6.  KVM looks at the timer state (in memory) and injects a forwarded physical
+    interrupt because it concludes the timer has expired.
+7.  KVM marks the timer interrupt as active on the physical distributor
+7.  KVM enables the timer, enables interrupts, and runs the VCPU
+
+Notice that again the forwarded physical interrupt is injected to the
+guest without having actually been handled on the host.  In this case it
+is because the physical interrupt is never actually seen by the host because the
+timer is disabled upon guest return, and the virtual forwarded interrupt is
+injected on the KVM guest entry path.

Documentation/virtual/kvm/devices/arm-vgic.txt

@@ -44,28 +44,29 @@ Groups:
   Attributes:
     The attr field of kvm_device_attr encodes two values:
     bits:     | 63   ....  40 | 39 ..  32  |  31   ....    0 |
-    values:   |    reserved   |   cpu id   |      offset     |
+    values:   |    reserved   | vcpu_index |      offset     |
 
     All distributor regs are (rw, 32-bit)
 
     The offset is relative to the "Distributor base address" as defined in the
     GICv2 specs.  Getting or setting such a register has the same effect as
-    reading or writing the register on the actual hardware from the cpu
-    specified with cpu id field.  Note that most distributor fields are not
-    banked, but return the same value regardless of the cpu id used to access
-    the register.
+    reading or writing the register on the actual hardware from the cpu whose
+    index is specified with the vcpu_index field.  Note that most distributor
+    fields are not banked, but return the same value regardless of the
+    vcpu_index used to access the register.
   Limitations:
     - Priorities are not implemented, and registers are RAZ/WI
     - Currently only implemented for KVM_DEV_TYPE_ARM_VGIC_V2.
   Errors:
-    -ENODEV: Getting or setting this register is not yet supported
+    -ENXIO: Getting or setting this register is not yet supported
     -EBUSY: One or more VCPUs are running
+    -EINVAL: Invalid vcpu_index supplied
 
   KVM_DEV_ARM_VGIC_GRP_CPU_REGS
   Attributes:
     The attr field of kvm_device_attr encodes two values:
     bits:     | 63   ....  40 | 39 ..  32  |  31   ....    0 |
-    values:   |    reserved   |   cpu id   |      offset     |
+    values:   |    reserved   | vcpu_index |      offset     |
 
     All CPU interface regs are (rw, 32-bit)
 
@@ -91,8 +92,9 @@ Groups:
     - Priorities are not implemented, and registers are RAZ/WI
     - Currently only implemented for KVM_DEV_TYPE_ARM_VGIC_V2.
   Errors:
-    -ENODEV: Getting or setting this register is not yet supported
+    -ENXIO: Getting or setting this register is not yet supported
     -EBUSY: One or more VCPUs are running
+    -EINVAL: Invalid vcpu_index supplied
 
   KVM_DEV_ARM_VGIC_GRP_NR_IRQS
   Attributes:

arch/arm/include/asm/kvm_arm.h

@@ -218,4 +218,24 @@
 #define HSR_DABT_CM		(1U << 8)
 #define HSR_DABT_EA		(1U << 9)
 
+#define kvm_arm_exception_type	\
+	{0, "RESET" }, 		\
+	{1, "UNDEFINED" },	\
+	{2, "SOFTWARE" },	\
+	{3, "PREF_ABORT" },	\
+	{4, "DATA_ABORT" },	\
+	{5, "IRQ" },		\
+	{6, "FIQ" },		\
+	{7, "HVC" }
+
+#define HSRECN(x) { HSR_EC_##x, #x }
+
+#define kvm_arm_exception_class \
+	HSRECN(UNKNOWN), HSRECN(WFI), HSRECN(CP15_32), HSRECN(CP15_64), \
+	HSRECN(CP14_MR), HSRECN(CP14_LS), HSRECN(CP_0_13), HSRECN(CP10_ID), \
+	HSRECN(JAZELLE), HSRECN(BXJ), HSRECN(CP14_64), HSRECN(SVC_HYP), \
+	HSRECN(HVC), HSRECN(SMC), HSRECN(IABT), HSRECN(IABT_HYP), \
+	HSRECN(DABT), HSRECN(DABT_HYP)
+
+
 #endif /* __ARM_KVM_ARM_H__ */

arch/arm/include/asm/kvm_host.h

@@ -126,7 +126,10 @@ struct kvm_vcpu_arch {
 	 * here.
 	 */
 
-	/* Don't run the guest on this vcpu */
+	/* vcpu power-off state */
+	bool power_off;
+
+	 /* Don't run the guest (internal implementation need) */
 	bool pause;
 
 	/* IO related fields */

arch/arm/kvm/Kconfig

@@ -21,6 +21,7 @@ config KVM
 	depends on MMU && OF
 	select PREEMPT_NOTIFIERS
 	select ANON_INODES
+	select ARM_GIC
 	select HAVE_KVM_CPU_RELAX_INTERCEPT
 	select HAVE_KVM_ARCH_TLB_FLUSH_ALL
 	select KVM_MMIO
@@ -45,4 +46,6 @@ config KVM_ARM_HOST
 	---help---
 	  Provides host support for ARM processors.
 
+source drivers/vhost/Kconfig
+
 endif # VIRTUALIZATION

arch/arm/kvm/arm.c

@@ -271,6 +271,16 @@ int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu)
 	return kvm_timer_should_fire(vcpu);
 }
 
+void kvm_arch_vcpu_blocking(struct kvm_vcpu *vcpu)
+{
+	kvm_timer_schedule(vcpu);
+}
+
+void kvm_arch_vcpu_unblocking(struct kvm_vcpu *vcpu)
+{
+	kvm_timer_unschedule(vcpu);
+}
+
 int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
 {
 	/* Force users to call KVM_ARM_VCPU_INIT */
@@ -308,7 +318,7 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
 int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu,
 				    struct kvm_mp_state *mp_state)
 {
-	if (vcpu->arch.pause)
+	if (vcpu->arch.power_off)
 		mp_state->mp_state = KVM_MP_STATE_STOPPED;
 	else
 		mp_state->mp_state = KVM_MP_STATE_RUNNABLE;
@@ -321,10 +331,10 @@ int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,
 {
 	switch (mp_state->mp_state) {
 	case KVM_MP_STATE_RUNNABLE:
-		vcpu->arch.pause = false;
+		vcpu->arch.power_off = false;
 		break;
 	case KVM_MP_STATE_STOPPED:
-		vcpu->arch.pause = true;
+		vcpu->arch.power_off = true;
 		break;
 	default:
 		return -EINVAL;
@@ -342,7 +352,8 @@ int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,
  */
 int kvm_arch_vcpu_runnable(struct kvm_vcpu *v)
 {
-	return !!v->arch.irq_lines || kvm_vgic_vcpu_pending_irq(v);
+	return ((!!v->arch.irq_lines || kvm_vgic_vcpu_pending_irq(v))
+		&& !v->arch.power_off && !v->arch.pause);
 }
 
 /* Just ensure a guest exit from a particular CPU */
@@ -468,11 +479,38 @@ bool kvm_arch_intc_initialized(struct kvm *kvm)
 	return vgic_initialized(kvm);
 }
 
-static void vcpu_pause(struct kvm_vcpu *vcpu)
+static void kvm_arm_halt_guest(struct kvm *kvm) __maybe_unused;
+static void kvm_arm_resume_guest(struct kvm *kvm) __maybe_unused;
+
+static void kvm_arm_halt_guest(struct kvm *kvm)
+{
+	int i;
+	struct kvm_vcpu *vcpu;
+
+	kvm_for_each_vcpu(i, vcpu, kvm)
+		vcpu->arch.pause = true;
+	force_vm_exit(cpu_all_mask);
+}
+
+static void kvm_arm_resume_guest(struct kvm *kvm)
+{
+	int i;
+	struct kvm_vcpu *vcpu;
+
+	kvm_for_each_vcpu(i, vcpu, kvm) {
+		wait_queue_head_t *wq = kvm_arch_vcpu_wq(vcpu);
+
+		vcpu->arch.pause = false;
+		wake_up_interruptible(wq);
+	}
+}
+
+static void vcpu_sleep(struct kvm_vcpu *vcpu)
 {
 	wait_queue_head_t *wq = kvm_arch_vcpu_wq(vcpu);
 
-	wait_event_interruptible(*wq, !vcpu->arch.pause);
+	wait_event_interruptible(*wq, ((!vcpu->arch.power_off) &&
+				       (!vcpu->arch.pause)));
 }
 
 static int kvm_vcpu_initialized(struct kvm_vcpu *vcpu)
@@ -522,8 +560,8 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
 
 		update_vttbr(vcpu->kvm);
 
-		if (vcpu->arch.pause)
-			vcpu_pause(vcpu);
+		if (vcpu->arch.power_off || vcpu->arch.pause)
+			vcpu_sleep(vcpu);
 
 		/*
 		 * Disarming the background timer must be done in a
@@ -549,11 +587,12 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
 			run->exit_reason = KVM_EXIT_INTR;
 		}
 
-		if (ret <= 0 || need_new_vmid_gen(vcpu->kvm)) {
+		if (ret <= 0 || need_new_vmid_gen(vcpu->kvm) ||
+			vcpu->arch.power_off || vcpu->arch.pause) {
 			local_irq_enable();
+			kvm_timer_sync_hwstate(vcpu);
 			kvm_vgic_sync_hwstate(vcpu);
 			preempt_enable();
-			kvm_timer_sync_hwstate(vcpu);
 			continue;
 		}
 
@@ -596,14 +635,19 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
 		 * guest time.
 		 */
 		kvm_guest_exit();
-		trace_kvm_exit(kvm_vcpu_trap_get_class(vcpu), *vcpu_pc(vcpu));
+		trace_kvm_exit(ret, kvm_vcpu_trap_get_class(vcpu), *vcpu_pc(vcpu));
+
+		/*
+		 * We must sync the timer state before the vgic state so that
+		 * the vgic can properly sample the updated state of the
+		 * interrupt line.
+		 */
+		kvm_timer_sync_hwstate(vcpu);
 
 		kvm_vgic_sync_hwstate(vcpu);
 
 		preempt_enable();
 
-		kvm_timer_sync_hwstate(vcpu);
-
 		ret = handle_exit(vcpu, run, ret);
 	}
 
@@ -765,12 +809,12 @@ static int kvm_arch_vcpu_ioctl_vcpu_init(struct kvm_vcpu *vcpu,
 	vcpu_reset_hcr(vcpu);
 
 	/*
-	 * Handle the "start in power-off" case by marking the VCPU as paused.
+	 * Handle the "start in power-off" case.
 	 */
 	if (test_bit(KVM_ARM_VCPU_POWER_OFF, vcpu->arch.features))
-		vcpu->arch.pause = true;
+		vcpu->arch.power_off = true;
 	else
-		vcpu->arch.pause = false;
+		vcpu->arch.power_off = false;
 
 	return 0;
 }
@@ -1080,7 +1124,7 @@ static int init_hyp_mode(void)
 	 */
 	err = kvm_timer_hyp_init();
 	if (err)
-		goto out_free_mappings;
+		goto out_free_context;
 
 #ifndef CONFIG_HOTPLUG_CPU
 	free_boot_hyp_pgd();

arch/arm/kvm/psci.c

@@ -63,7 +63,7 @@ static unsigned long kvm_psci_vcpu_suspend(struct kvm_vcpu *vcpu)
 
 static void kvm_psci_vcpu_off(struct kvm_vcpu *vcpu)
 {
-	vcpu->arch.pause = true;
+	vcpu->arch.power_off = true;
 }
 
 static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)
@@ -87,7 +87,7 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)
 	 */
 	if (!vcpu)
 		return PSCI_RET_INVALID_PARAMS;
-	if (!vcpu->arch.pause) {
+	if (!vcpu->arch.power_off) {
 		if (kvm_psci_version(source_vcpu) != KVM_ARM_PSCI_0_1)
 			return PSCI_RET_ALREADY_ON;
 		else
@@ -115,7 +115,7 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)
 	 * the general puspose registers are undefined upon CPU_ON.
 	 */
 	*vcpu_reg(vcpu, 0) = context_id;
-	vcpu->arch.pause = false;
+	vcpu->arch.power_off = false;
 	smp_mb();		/* Make sure the above is visible */
 
 	wq = kvm_arch_vcpu_wq(vcpu);
@@ -153,7 +153,7 @@ static unsigned long kvm_psci_vcpu_affinity_info(struct kvm_vcpu *vcpu)
 		mpidr = kvm_vcpu_get_mpidr_aff(tmp);
 		if ((mpidr & target_affinity_mask) == target_affinity) {
 			matching_cpus++;
-			if (!tmp->arch.pause)
+			if (!tmp->arch.power_off)
 				return PSCI_0_2_AFFINITY_LEVEL_ON;
 		}
 	}
@@ -179,7 +179,7 @@ static void kvm_prepare_system_event(struct kvm_vcpu *vcpu, u32 type)
 	 * re-initialized.
 	 */
 	kvm_for_each_vcpu(i, tmp, vcpu->kvm) {
-		tmp->arch.pause = true;
+		tmp->arch.power_off = true;
 		kvm_vcpu_kick(tmp);
 	}
 

arch/arm/kvm/trace.h

@@ -25,21 +25,25 @@ TRACE_EVENT(kvm_entry,
 );
 
 TRACE_EVENT(kvm_exit,
-	TP_PROTO(unsigned int exit_reason, unsigned long vcpu_pc),
-	TP_ARGS(exit_reason, vcpu_pc),
+	TP_PROTO(int idx, unsigned int exit_reason, unsigned long vcpu_pc),
+	TP_ARGS(idx, exit_reason, vcpu_pc),
 
 	TP_STRUCT__entry(
+		__field(	int,		idx		)
 		__field(	unsigned int,	exit_reason	)
 		__field(	unsigned long,	vcpu_pc		)
 	),
 
 	TP_fast_assign(
+		__entry->idx			= idx;
 		__entry->exit_reason		= exit_reason;
 		__entry->vcpu_pc		= vcpu_pc;
 	),
 
-	TP_printk("HSR_EC: 0x%04x, PC: 0x%08lx",
+	TP_printk("%s: HSR_EC: 0x%04x (%s), PC: 0x%08lx",
+		  __print_symbolic(__entry->idx, kvm_arm_exception_type),
 		  __entry->exit_reason,
+		  __print_symbolic(__entry->exit_reason, kvm_arm_exception_class),
 		  __entry->vcpu_pc)
 );
 

arch/arm64/include/asm/kvm_arm.h

@@ -200,4 +200,20 @@
 /* Hyp Prefetch Fault Address Register (HPFAR/HDFAR) */
 #define HPFAR_MASK	(~UL(0xf))
 
+#define kvm_arm_exception_type	\
+	{0, "IRQ" }, 		\
+	{1, "TRAP" }
+
+#define ECN(x) { ESR_ELx_EC_##x, #x }
+
+#define kvm_arm_exception_class \
+	ECN(UNKNOWN), ECN(WFx), ECN(CP15_32), ECN(CP15_64), ECN(CP14_MR), \
+	ECN(CP14_LS), ECN(FP_ASIMD), ECN(CP10_ID), ECN(CP14_64), ECN(SVC64), \
+	ECN(HVC64), ECN(SMC64), ECN(SYS64), ECN(IMP_DEF), ECN(IABT_LOW), \
+	ECN(IABT_CUR), ECN(PC_ALIGN), ECN(DABT_LOW), ECN(DABT_CUR), \
+	ECN(SP_ALIGN), ECN(FP_EXC32), ECN(FP_EXC64), ECN(SERROR), \
+	ECN(BREAKPT_LOW), ECN(BREAKPT_CUR), ECN(SOFTSTP_LOW), \
+	ECN(SOFTSTP_CUR), ECN(WATCHPT_LOW), ECN(WATCHPT_CUR), \
+	ECN(BKPT32), ECN(VECTOR32), ECN(BRK64)
+
 #endif /* __ARM64_KVM_ARM_H__ */

arch/arm64/include/asm/kvm_host.h

@@ -149,7 +149,10 @@ struct kvm_vcpu_arch {
 		u32	mdscr_el1;
 	} guest_debug_preserved;
 
-	/* Don't run the guest */
+	/* vcpu power-off state */
+	bool power_off;
+
+	/* Don't run the guest (internal implementation need) */
 	bool pause;
 
 	/* IO related fields */

arch/arm64/kvm/Kconfig

@@ -41,4 +41,6 @@ config KVM_ARM_HOST
 	---help---
 	  Provides host support for ARM processors.
 
+source drivers/vhost/Kconfig
+
 endif # VIRTUALIZATION

arch/arm64/kvm/hyp.S

@@ -880,6 +880,14 @@ __kvm_hyp_panic:
 
 	bl __restore_sysregs
 
+	/*
+	 * Make sure we have a valid host stack, and don't leave junk in the
+	 * frame pointer that will give us a misleading host stack unwinding.
+	 */
+	ldr	x22, [x2, #CPU_GP_REG_OFFSET(CPU_SP_EL1)]
+	msr	sp_el1, x22
+	mov	x29, xzr
+
 1:	adr	x0, __hyp_panic_str
 	adr	x1, 2f
 	ldp	x2, x3, [x1]

arch/mips/include/asm/kvm_host.h

@@ -847,5 +847,7 @@ static inline void kvm_arch_flush_shadow_memslot(struct kvm *kvm,
 		struct kvm_memory_slot *slot) {}
 static inline void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu) {}
 static inline void kvm_arch_sched_in(struct kvm_vcpu *vcpu, int cpu) {}
+static inline void kvm_arch_vcpu_blocking(struct kvm_vcpu *vcpu) {}
+static inline void kvm_arch_vcpu_unblocking(struct kvm_vcpu *vcpu) {}
 
 #endif /* __MIPS_KVM_HOST_H__ */

arch/powerpc/include/asm/kvm_host.h

@@ -718,5 +718,7 @@ static inline void kvm_arch_memslots_updated(struct kvm *kvm, struct kvm_memslot
 static inline void kvm_arch_flush_shadow_all(struct kvm *kvm) {}
 static inline void kvm_arch_sched_in(struct kvm_vcpu *vcpu, int cpu) {}
 static inline void kvm_arch_exit(void) {}
+static inline void kvm_arch_vcpu_blocking(struct kvm_vcpu *vcpu) {}
+static inline void kvm_arch_vcpu_unblocking(struct kvm_vcpu *vcpu) {}
 
 #endif /* __POWERPC_KVM_HOST_H__ */

arch/s390/include/asm/kvm_host.h

@@ -644,5 +644,7 @@ static inline void kvm_arch_memslots_updated(struct kvm *kvm, struct kvm_memslot
 static inline void kvm_arch_flush_shadow_all(struct kvm *kvm) {}
 static inline void kvm_arch_flush_shadow_memslot(struct kvm *kvm,
 		struct kvm_memory_slot *slot) {}
+static inline void kvm_arch_vcpu_blocking(struct kvm_vcpu *vcpu) {}
+static inline void kvm_arch_vcpu_unblocking(struct kvm_vcpu *vcpu) {}
 
 #endif

arch/x86/include/asm/kvm_host.h

@@ -1261,4 +1261,8 @@ bool kvm_intr_is_single_vcpu(struct kvm *kvm, struct kvm_lapic_irq *irq,
 
 void kvm_set_msi_irq(struct kvm_kernel_irq_routing_entry *e,
 		     struct kvm_lapic_irq *irq);
+
+static inline void kvm_arch_vcpu_blocking(struct kvm_vcpu *vcpu) {}
+static inline void kvm_arch_vcpu_unblocking(struct kvm_vcpu *vcpu) {}
+
 #endif /* _ASM_X86_KVM_HOST_H */

include/kvm/arm_arch_timer.h

@@ -51,7 +51,7 @@ struct arch_timer_cpu {
 	bool				armed;
 
 	/* Timer IRQ */
-	const struct kvm_irq_level	*irq;
+	struct kvm_irq_level		irq;
 
 	/* VGIC mapping */
 	struct irq_phys_map		*map;
@@ -71,5 +71,7 @@ u64 kvm_arm_timer_get_reg(struct kvm_vcpu *, u64 regid);
 int kvm_arm_timer_set_reg(struct kvm_vcpu *, u64 regid, u64 value);
 
 bool kvm_timer_should_fire(struct kvm_vcpu *vcpu);
+void kvm_timer_schedule(struct kvm_vcpu *vcpu);
+void kvm_timer_unschedule(struct kvm_vcpu *vcpu);
 
 #endif

include/kvm/arm_vgic.h

@@ -112,7 +112,6 @@ struct vgic_vmcr {
 struct vgic_ops {
 	struct vgic_lr	(*get_lr)(const struct kvm_vcpu *, int);
 	void	(*set_lr)(struct kvm_vcpu *, int, struct vgic_lr);
-	void	(*sync_lr_elrsr)(struct kvm_vcpu *, int, struct vgic_lr);
 	u64	(*get_elrsr)(const struct kvm_vcpu *vcpu);
 	u64	(*get_eisr)(const struct kvm_vcpu *vcpu);
 	void	(*clear_eisr)(struct kvm_vcpu *vcpu);
@@ -159,7 +158,6 @@ struct irq_phys_map {
 	u32			virt_irq;
 	u32			phys_irq;
 	u32			irq;
-	bool			active;
 };
 
 struct irq_phys_map_entry {
@@ -296,22 +294,16 @@ struct vgic_v3_cpu_if {
 };
 
 struct vgic_cpu {
-	/* per IRQ to LR mapping */
-	u8		*vgic_irq_lr_map;
-
 	/* Pending/active/both interrupts on this VCPU */
-	DECLARE_BITMAP(	pending_percpu, VGIC_NR_PRIVATE_IRQS);
-	DECLARE_BITMAP(	active_percpu, VGIC_NR_PRIVATE_IRQS);
-	DECLARE_BITMAP(	pend_act_percpu, VGIC_NR_PRIVATE_IRQS);
+	DECLARE_BITMAP(pending_percpu, VGIC_NR_PRIVATE_IRQS);
+	DECLARE_BITMAP(active_percpu, VGIC_NR_PRIVATE_IRQS);
+	DECLARE_BITMAP(pend_act_percpu, VGIC_NR_PRIVATE_IRQS);
 
 	/* Pending/active/both shared interrupts, dynamically sized */
 	unsigned long	*pending_shared;
 	unsigned long   *active_shared;
 	unsigned long   *pend_act_shared;
 
-	/* Bitmap of used/free list registers */
-	DECLARE_BITMAP(	lr_used, VGIC_V2_MAX_LRS);
-
 	/* Number of list registers on this CPU */
 	int		nr_lr;
 
@@ -354,8 +346,6 @@ int kvm_vgic_vcpu_active_irq(struct kvm_vcpu *vcpu);
 struct irq_phys_map *kvm_vgic_map_phys_irq(struct kvm_vcpu *vcpu,
 					   int virt_irq, int irq);
 int kvm_vgic_unmap_phys_irq(struct kvm_vcpu *vcpu, struct irq_phys_map *map);
-bool kvm_vgic_get_phys_irq_active(struct irq_phys_map *map);
-void kvm_vgic_set_phys_irq_active(struct irq_phys_map *map, bool active);
 
 #define irqchip_in_kernel(k)	(!!((k)->arch.vgic.in_kernel))
 #define vgic_initialized(k)	(!!((k)->arch.vgic.nr_cpus))

include/linux/kvm_host.h

@@ -647,6 +647,8 @@ int kvm_vcpu_write_guest(struct kvm_vcpu *vcpu, gpa_t gpa, const void *data,
 void kvm_vcpu_mark_page_dirty(struct kvm_vcpu *vcpu, gfn_t gfn);
 
 void kvm_vcpu_block(struct kvm_vcpu *vcpu);
+void kvm_arch_vcpu_blocking(struct kvm_vcpu *vcpu);
+void kvm_arch_vcpu_unblocking(struct kvm_vcpu *vcpu);
 void kvm_vcpu_kick(struct kvm_vcpu *vcpu);
 int kvm_vcpu_yield_to(struct kvm_vcpu *target);
 void kvm_vcpu_on_spin(struct kvm_vcpu *vcpu);

virt/kvm/arm/arch_timer.c

@@ -28,6 +28,8 @@
 #include <kvm/arm_vgic.h>
 #include <kvm/arm_arch_timer.h>
 
+#include "trace.h"
+
 static struct timecounter *timecounter;
 static struct workqueue_struct *wqueue;
 static unsigned int host_vtimer_irq;
@@ -59,18 +61,6 @@ static void timer_disarm(struct arch_timer_cpu *timer)
 	}
 }
 
-static void kvm_timer_inject_irq(struct kvm_vcpu *vcpu)
-{
-	int ret;
-	struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu;
-
-	kvm_vgic_set_phys_irq_active(timer->map, true);
-	ret = kvm_vgic_inject_mapped_irq(vcpu->kvm, vcpu->vcpu_id,
-					 timer->map,
-					 timer->irq->level);
-	WARN_ON(ret);
-}
-
 static irqreturn_t kvm_arch_timer_handler(int irq, void *dev_id)
 {
 	struct kvm_vcpu *vcpu = *(struct kvm_vcpu **)dev_id;
@@ -111,14 +101,20 @@ static enum hrtimer_restart kvm_timer_expire(struct hrtimer *hrt)
 	return HRTIMER_NORESTART;
 }
 
+static bool kvm_timer_irq_can_fire(struct kvm_vcpu *vcpu)
+{
+	struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu;
+
+	return !(timer->cntv_ctl & ARCH_TIMER_CTRL_IT_MASK) &&
+		(timer->cntv_ctl & ARCH_TIMER_CTRL_ENABLE);
+}
+
 bool kvm_timer_should_fire(struct kvm_vcpu *vcpu)
 {
 	struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu;
 	cycle_t cval, now;
 
-	if ((timer->cntv_ctl & ARCH_TIMER_CTRL_IT_MASK) ||
-	    !(timer->cntv_ctl & ARCH_TIMER_CTRL_ENABLE) ||
-	    kvm_vgic_get_phys_irq_active(timer->map))
+	if (!kvm_timer_irq_can_fire(vcpu))
 		return false;
 
 	cval = timer->cntv_cval;
@@ -127,62 +123,143 @@ bool kvm_timer_should_fire(struct kvm_vcpu *vcpu)
 	return cval <= now;
 }
 
+static void kvm_timer_update_irq(struct kvm_vcpu *vcpu, bool new_level)
+{
+	int ret;
+	struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu;
+
+	BUG_ON(!vgic_initialized(vcpu->kvm));
+
+	timer->irq.level = new_level;
+	trace_kvm_timer_update_irq(vcpu->vcpu_id, timer->map->virt_irq,
+				   timer->irq.level);
+	ret = kvm_vgic_inject_mapped_irq(vcpu->kvm, vcpu->vcpu_id,
+					 timer->map,
+					 timer->irq.level);
+	WARN_ON(ret);
+}
+
+/*
+ * Check if there was a change in the timer state (should we raise or lower
+ * the line level to the GIC).
+ */
+static void kvm_timer_update_state(struct kvm_vcpu *vcpu)
+{
+	struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu;
+
+	/*
+	 * If userspace modified the timer registers via SET_ONE_REG before
+	 * the vgic was initialized, we mustn't set the timer->irq.level value
+	 * because the guest would never see the interrupt.  Instead wait
+	 * until we call this function from kvm_timer_flush_hwstate.
+	 */
+	if (!vgic_initialized(vcpu->kvm))
+	    return;
+
+	if (kvm_timer_should_fire(vcpu) != timer->irq.level)
+		kvm_timer_update_irq(vcpu, !timer->irq.level);
+}
+
+/*
+ * Schedule the background timer before calling kvm_vcpu_block, so that this
+ * thread is removed from its waitqueue and made runnable when there's a timer
+ * interrupt to handle.
+ */
+void kvm_timer_schedule(struct kvm_vcpu *vcpu)
+{
+	struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu;
+	u64 ns;
+	cycle_t cval, now;
+
+	BUG_ON(timer_is_armed(timer));
+
+	/*
+	 * No need to schedule a background timer if the guest timer has
+	 * already expired, because kvm_vcpu_block will return before putting
+	 * the thread to sleep.
+	 */
+	if (kvm_timer_should_fire(vcpu))
+		return;
+
+	/*
+	 * If the timer is not capable of raising interrupts (disabled or
+	 * masked), then there's no more work for us to do.
+	 */
+	if (!kvm_timer_irq_can_fire(vcpu))
+		return;
+
+	/*  The timer has not yet expired, schedule a background timer */
+	cval = timer->cntv_cval;
+	now = kvm_phys_timer_read() - vcpu->kvm->arch.timer.cntvoff;
+
+	ns = cyclecounter_cyc2ns(timecounter->cc,
+				 cval - now,
+				 timecounter->mask,
+				 &timecounter->frac);
+	timer_arm(timer, ns);
+}
+
+void kvm_timer_unschedule(struct kvm_vcpu *vcpu)
+{
+	struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu;
+	timer_disarm(timer);
+}
+
 /**
  * kvm_timer_flush_hwstate - prepare to move the virt timer to the cpu
  * @vcpu: The vcpu pointer
  *
- * Disarm any pending soft timers, since the world-switch code will write the
- * virtual timer state back to the physical CPU.
+ * Check if the virtual timer has expired while we were running in the host,
+ * and inject an interrupt if that was the case.
  */
 void kvm_timer_flush_hwstate(struct kvm_vcpu *vcpu)
 {
 	struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu;
+	bool phys_active;
+	int ret;
 
-	/*
-	 * We're about to run this vcpu again, so there is no need to
-	 * keep the background timer running, as we're about to
-	 * populate the CPU timer again.
-	 */
-	timer_disarm(timer);
+	kvm_timer_update_state(vcpu);
 
 	/*
-	 * If the timer expired while we were not scheduled, now is the time
-	 * to inject it.
+	 * If we enter the guest with the virtual input level to the VGIC
+	 * asserted, then we have already told the VGIC what we need to, and
+	 * we don't need to exit from the guest until the guest deactivates
+	 * the already injected interrupt, so therefore we should set the
+	 * hardware active state to prevent unnecessary exits from the guest.
+	 *
+	 * Conversely, if the virtual input level is deasserted, then always
+	 * clear the hardware active state to ensure that hardware interrupts
+	 * from the timer triggers a guest exit.
 	 */
-	if (kvm_timer_should_fire(vcpu))
-		kvm_timer_inject_irq(vcpu);
+	if (timer->irq.level)
+		phys_active = true;
+	else
+		phys_active = false;
+
+	ret = irq_set_irqchip_state(timer->map->irq,
+				    IRQCHIP_STATE_ACTIVE,
+				    phys_active);
+	WARN_ON(ret);
 }
 
 /**
  * kvm_timer_sync_hwstate - sync timer state from cpu
  * @vcpu: The vcpu pointer
  *
- * Check if the virtual timer was armed and either schedule a corresponding
- * soft timer or inject directly if already expired.
+ * Check if the virtual timer has expired while we were running in the guest,
+ * and inject an interrupt if that was the case.
  */
 void kvm_timer_sync_hwstate(struct kvm_vcpu *vcpu)
 {
 	struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu;
-	cycle_t cval, now;
-	u64 ns;
 
 	BUG_ON(timer_is_armed(timer));
 
-	if (kvm_timer_should_fire(vcpu)) {
-		/*
-		 * Timer has already expired while we were not
-		 * looking. Inject the interrupt and carry on.
-		 */
-		kvm_timer_inject_irq(vcpu);
-		return;
-	}
-
-	cval = timer->cntv_cval;
-	now = kvm_phys_timer_read() - vcpu->kvm->arch.timer.cntvoff;
-
-	ns = cyclecounter_cyc2ns(timecounter->cc, cval - now, timecounter->mask,
-				 &timecounter->frac);
-	timer_arm(timer, ns);
+	/*
+	 * The guest could have modified the timer registers or the timer
+	 * could have expired, update the timer state.
+	 */
+	kvm_timer_update_state(vcpu);
 }
 
 int kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu,
@@ -197,7 +274,7 @@ int kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu,
 	 * kvm_vcpu_set_target(). To handle this, we determine
 	 * vcpu timer irq number when the vcpu is reset.
 	 */
-	timer->irq = irq;
+	timer->irq.irq = irq->irq;
 
 	/*
 	 * The bits in CNTV_CTL are architecturally reset to UNKNOWN for ARMv8
@@ -206,6 +283,7 @@ int kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu,
 	 * the ARMv7 architecture.
 	 */
 	timer->cntv_ctl = 0;
+	kvm_timer_update_state(vcpu);
 
 	/*
 	 * Tell the VGIC that the virtual interrupt is tied to a
@@ -250,6 +328,8 @@ int kvm_arm_timer_set_reg(struct kvm_vcpu *vcpu, u64 regid, u64 value)
 	default:
 		return -1;
 	}
+
+	kvm_timer_update_state(vcpu);
 	return 0;
 }
 

virt/kvm/arm/trace.h

+#if !defined(_TRACE_KVM_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_KVM_H
+
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM kvm
+
+/*
+ * Tracepoints for vgic
+ */
+TRACE_EVENT(vgic_update_irq_pending,
+	TP_PROTO(unsigned long vcpu_id, __u32 irq, bool level),
+	TP_ARGS(vcpu_id, irq, level),
+
+	TP_STRUCT__entry(
+		__field(	unsigned long,	vcpu_id	)
+		__field(	__u32,		irq	)
+		__field(	bool,		level	)
+	),
+
+	TP_fast_assign(
+		__entry->vcpu_id	= vcpu_id;
+		__entry->irq		= irq;
+		__entry->level		= level;
+	),
+
+	TP_printk("VCPU: %ld, IRQ %d, level: %d",
+		  __entry->vcpu_id, __entry->irq, __entry->level)
+);
+
+/*
+ * Tracepoints for arch_timer
+ */
+TRACE_EVENT(kvm_timer_update_irq,
+	TP_PROTO(unsigned long vcpu_id, __u32 irq, int level),
+	TP_ARGS(vcpu_id, irq, level),
+
+	TP_STRUCT__entry(
+		__field(	unsigned long,	vcpu_id	)
+		__field(	__u32,		irq	)
+		__field(	int,		level	)
+	),
+
+	TP_fast_assign(
+		__entry->vcpu_id	= vcpu_id;
+		__entry->irq		= irq;
+		__entry->level		= level;
+	),
+
+	TP_printk("VCPU: %ld, IRQ %d, level %d",
+		  __entry->vcpu_id, __entry->irq, __entry->level)
+);
+
+#endif /* _TRACE_KVM_H */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH ../../../virt/kvm/arm
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE trace
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>

virt/kvm/arm/vgic-v2.c

@@ -79,11 +79,7 @@ static void vgic_v2_set_lr(struct kvm_vcpu *vcpu, int lr,
 		lr_val |= (lr_desc.source << GICH_LR_PHYSID_CPUID_SHIFT);
 
 	vcpu->arch.vgic_cpu.vgic_v2.vgic_lr[lr] = lr_val;
-}
 
-static void vgic_v2_sync_lr_elrsr(struct kvm_vcpu *vcpu, int lr,
-				  struct vgic_lr lr_desc)
-{
 	if (!(lr_desc.state & LR_STATE_MASK))
 		vcpu->arch.vgic_cpu.vgic_v2.vgic_elrsr |= (1ULL << lr);
 	else
@@ -158,6 +154,7 @@ static void vgic_v2_enable(struct kvm_vcpu *vcpu)
 	 * anyway.
 	 */
 	vcpu->arch.vgic_cpu.vgic_v2.vgic_vmcr = 0;
+	vcpu->arch.vgic_cpu.vgic_v2.vgic_elrsr = ~0;
 
 	/* Get the show on the road... */
 	vcpu->arch.vgic_cpu.vgic_v2.vgic_hcr = GICH_HCR_EN;
@@ -166,7 +163,6 @@ static void vgic_v2_enable(struct kvm_vcpu *vcpu)
 static const struct vgic_ops vgic_v2_ops = {
 	.get_lr			= vgic_v2_get_lr,
 	.set_lr			= vgic_v2_set_lr,
-	.sync_lr_elrsr		= vgic_v2_sync_lr_elrsr,
 	.get_elrsr		= vgic_v2_get_elrsr,
 	.get_eisr		= vgic_v2_get_eisr,
 	.clear_eisr		= vgic_v2_clear_eisr,

virt/kvm/arm/vgic-v3.c

@@ -112,11 +112,7 @@ static void vgic_v3_set_lr(struct kvm_vcpu *vcpu, int lr,
 	}
 
 	vcpu->arch.vgic_cpu.vgic_v3.vgic_lr[LR_INDEX(lr)] = lr_val;
-}
 
-static void vgic_v3_sync_lr_elrsr(struct kvm_vcpu *vcpu, int lr,
-				  struct vgic_lr lr_desc)
-{
 	if (!(lr_desc.state & LR_STATE_MASK))
 		vcpu->arch.vgic_cpu.vgic_v3.vgic_elrsr |= (1U << lr);
 	else
@@ -193,6 +189,7 @@ static void vgic_v3_enable(struct kvm_vcpu *vcpu)
 	 * anyway.
 	 */
 	vgic_v3->vgic_vmcr = 0;
+	vgic_v3->vgic_elrsr = ~0;
 
 	/*
 	 * If we are emulating a GICv3, we do it in an non-GICv2-compatible
@@ -211,7 +208,6 @@ static void vgic_v3_enable(struct kvm_vcpu *vcpu)
 static const struct vgic_ops vgic_v3_ops = {
 	.get_lr			= vgic_v3_get_lr,
 	.set_lr			= vgic_v3_set_lr,
-	.sync_lr_elrsr		= vgic_v3_sync_lr_elrsr,
 	.get_elrsr		= vgic_v3_get_elrsr,
 	.get_eisr		= vgic_v3_get_eisr,
 	.clear_eisr		= vgic_v3_clear_eisr,

virt/kvm/arm/vgic.c

@@ -34,6 +34,9 @@
 #include <asm/kvm.h>
 #include <kvm/iodev.h>
 
+#define CREATE_TRACE_POINTS
+#include "trace.h"
+
 /*
  * How the whole thing works (courtesy of Christoffer Dall):
  *
@@ -102,11 +105,13 @@
 #include "vgic.h"
 
 static void vgic_retire_disabled_irqs(struct kvm_vcpu *vcpu);
-static void vgic_retire_lr(int lr_nr, int irq, struct kvm_vcpu *vcpu);
+static void vgic_retire_lr(int lr_nr, struct kvm_vcpu *vcpu);
 static struct vgic_lr vgic_get_lr(const struct kvm_vcpu *vcpu, int lr);
 static void vgic_set_lr(struct kvm_vcpu *vcpu, int lr, struct vgic_lr lr_desc);
+static u64 vgic_get_elrsr(struct kvm_vcpu *vcpu);
 static struct irq_phys_map *vgic_irq_map_search(struct kvm_vcpu *vcpu,
 						int virt_irq);
+static int compute_pending_for_cpu(struct kvm_vcpu *vcpu);
 
 static const struct vgic_ops *vgic_ops;
 static const struct vgic_params *vgic;
@@ -357,6 +362,11 @@ static void vgic_dist_irq_clear_soft_pend(struct kvm_vcpu *vcpu, int irq)
 	struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
 
 	vgic_bitmap_set_irq_val(&dist->irq_soft_pend, vcpu->vcpu_id, irq, 0);
+	if (!vgic_dist_irq_get_level(vcpu, irq)) {
+		vgic_dist_irq_clear_pending(vcpu, irq);
+		if (!compute_pending_for_cpu(vcpu))
+			clear_bit(vcpu->vcpu_id, dist->irq_pending_on_cpu);
+	}
 }
 
 static int vgic_dist_irq_is_pending(struct kvm_vcpu *vcpu, int irq)
@@ -654,10 +664,9 @@ bool vgic_handle_cfg_reg(u32 *reg, struct kvm_exit_mmio *mmio,
 	vgic_reg_access(mmio, &val, offset,
 			ACCESS_READ_VALUE | ACCESS_WRITE_VALUE);
 	if (mmio->is_write) {
-		if (offset < 8) {
-			*reg = ~0U; /* Force PPIs/SGIs to 1 */
+		/* Ignore writes to read-only SGI and PPI bits */
+		if (offset < 8)
 			return false;
-		}
 
 		val = vgic_cfg_compress(val);
 		if (offset & 4) {
@@ -683,9 +692,11 @@ bool vgic_handle_cfg_reg(u32 *reg, struct kvm_exit_mmio *mmio,
 void vgic_unqueue_irqs(struct kvm_vcpu *vcpu)
 {
 	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
+	u64 elrsr = vgic_get_elrsr(vcpu);
+	unsigned long *elrsr_ptr = u64_to_bitmask(&elrsr);
 	int i;
 
-	for_each_set_bit(i, vgic_cpu->lr_used, vgic_cpu->nr_lr) {
+	for_each_clear_bit(i, elrsr_ptr, vgic_cpu->nr_lr) {
 		struct vgic_lr lr = vgic_get_lr(vcpu, i);
 
 		/*
@@ -706,30 +717,14 @@ void vgic_unqueue_irqs(struct kvm_vcpu *vcpu)
 		 * interrupt then move the active state to the
 		 * distributor tracking bit.
 		 */
-		if (lr.state & LR_STATE_ACTIVE) {
+		if (lr.state & LR_STATE_ACTIVE)
 			vgic_irq_set_active(vcpu, lr.irq);
-			lr.state &= ~LR_STATE_ACTIVE;
-		}
 
 		/*
 		 * Reestablish the pending state on the distributor and the
-		 * CPU interface.  It may have already been pending, but that
-		 * is fine, then we are only setting a few bits that were
-		 * already set.
-		 */
-		if (lr.state & LR_STATE_PENDING) {
-			vgic_dist_irq_set_pending(vcpu, lr.irq);
-			lr.state &= ~LR_STATE_PENDING;
-		}
-
-		vgic_set_lr(vcpu, i, lr);
-
-		/*
-		 * Mark the LR as free for other use.
+		 * CPU interface and mark the LR as free for other use.
 		 */
-		BUG_ON(lr.state & LR_STATE_MASK);
-		vgic_retire_lr(i, lr.irq, vcpu);
-		vgic_irq_clear_queued(vcpu, lr.irq);
+		vgic_retire_lr(i, vcpu);
 
 		/* Finally update the VGIC state. */
 		vgic_update_state(vcpu->kvm);
@@ -982,6 +977,12 @@ static int compute_pending_for_cpu(struct kvm_vcpu *vcpu)
 	pend_percpu = vcpu->arch.vgic_cpu.pending_percpu;
 	pend_shared = vcpu->arch.vgic_cpu.pending_shared;
 
+	if (!dist->enabled) {
+		bitmap_zero(pend_percpu, VGIC_NR_PRIVATE_IRQS);
+		bitmap_zero(pend_shared, nr_shared);
+		return 0;
+	}
+
 	pending = vgic_bitmap_get_cpu_map(&dist->irq_pending, vcpu_id);
 	enabled = vgic_bitmap_get_cpu_map(&dist->irq_enabled, vcpu_id);
 	bitmap_and(pend_percpu, pending, enabled, VGIC_NR_PRIVATE_IRQS);
@@ -1009,11 +1010,6 @@ void vgic_update_state(struct kvm *kvm)
 	struct kvm_vcpu *vcpu;
 	int c;
 
-	if (!dist->enabled) {
-		set_bit(0, dist->irq_pending_on_cpu);
-		return;
-	}
-
 	kvm_for_each_vcpu(c, vcpu, kvm) {
 		if (compute_pending_for_cpu(vcpu))
 			set_bit(c, dist->irq_pending_on_cpu);
@@ -1036,12 +1032,6 @@ static void vgic_set_lr(struct kvm_vcpu *vcpu, int lr,
 	vgic_ops->set_lr(vcpu, lr, vlr);
 }
 
-static void vgic_sync_lr_elrsr(struct kvm_vcpu *vcpu, int lr,
-			       struct vgic_lr vlr)
-{
-	vgic_ops->sync_lr_elrsr(vcpu, lr, vlr);
-}
-
 static inline u64 vgic_get_elrsr(struct kvm_vcpu *vcpu)
 {
 	return vgic_ops->get_elrsr(vcpu);
@@ -1087,16 +1077,23 @@ static inline void vgic_enable(struct kvm_vcpu *vcpu)
 	vgic_ops->enable(vcpu);
 }
 
-static void vgic_retire_lr(int lr_nr, int irq, struct kvm_vcpu *vcpu)
+static void vgic_retire_lr(int lr_nr, struct kvm_vcpu *vcpu)
 {
-	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
 	struct vgic_lr vlr = vgic_get_lr(vcpu, lr_nr);
 
+	vgic_irq_clear_queued(vcpu, vlr.irq);
+
+	/*
+	 * We must transfer the pending state back to the distributor before
+	 * retiring the LR, otherwise we may loose edge-triggered interrupts.
+	 */
+	if (vlr.state & LR_STATE_PENDING) {
+		vgic_dist_irq_set_pending(vcpu, vlr.irq);
+		vlr.hwirq = 0;
+	}
+
 	vlr.state = 0;
 	vgic_set_lr(vcpu, lr_nr, vlr);
-	clear_bit(lr_nr, vgic_cpu->lr_used);
-	vgic_cpu->vgic_irq_lr_map[irq] = LR_EMPTY;
-	vgic_sync_lr_elrsr(vcpu, lr_nr, vlr);
 }
 
 /*
@@ -1110,17 +1107,15 @@ static void vgic_retire_lr(int lr_nr, int irq, struct kvm_vcpu *vcpu)
  */
 static void vgic_retire_disabled_irqs(struct kvm_vcpu *vcpu)
 {
-	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
+	u64 elrsr = vgic_get_elrsr(vcpu);
+	unsigned long *elrsr_ptr = u64_to_bitmask(&elrsr);
 	int lr;
 
-	for_each_set_bit(lr, vgic_cpu->lr_used, vgic->nr_lr) {
+	for_each_clear_bit(lr, elrsr_ptr, vgic->nr_lr) {
 		struct vgic_lr vlr = vgic_get_lr(vcpu, lr);
 
-		if (!vgic_irq_is_enabled(vcpu, vlr.irq)) {
-			vgic_retire_lr(lr, vlr.irq, vcpu);
-			if (vgic_irq_is_queued(vcpu, vlr.irq))
-				vgic_irq_clear_queued(vcpu, vlr.irq);
-		}
+		if (!vgic_irq_is_enabled(vcpu, vlr.irq))
+			vgic_retire_lr(lr, vcpu);
 	}
 }
 
@@ -1132,7 +1127,8 @@ static void vgic_queue_irq_to_lr(struct kvm_vcpu *vcpu, int irq,
 		kvm_debug("Set active, clear distributor: 0x%x\n", vlr.state);
 		vgic_irq_clear_active(vcpu, irq);
 		vgic_update_state(vcpu->kvm);
-	} else if (vgic_dist_irq_is_pending(vcpu, irq)) {
+	} else {
+		WARN_ON(!vgic_dist_irq_is_pending(vcpu, irq));
 		vlr.state |= LR_STATE_PENDING;
 		kvm_debug("Set pending: 0x%x\n", vlr.state);
 	}
@@ -1159,7 +1155,6 @@ static void vgic_queue_irq_to_lr(struct kvm_vcpu *vcpu, int irq,
 	}
 
 	vgic_set_lr(vcpu, lr_nr, vlr);
-	vgic_sync_lr_elrsr(vcpu, lr_nr, vlr);
 }
 
 /*
@@ -1169,8 +1164,9 @@ static void vgic_queue_irq_to_lr(struct kvm_vcpu *vcpu, int irq,
  */
 bool vgic_queue_irq(struct kvm_vcpu *vcpu, u8 sgi_source_id, int irq)
 {
-	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
 	struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
+	u64 elrsr = vgic_get_elrsr(vcpu);
+	unsigned long *elrsr_ptr = u64_to_bitmask(&elrsr);
 	struct vgic_lr vlr;
 	int lr;
 
@@ -1181,28 +1177,22 @@ bool vgic_queue_irq(struct kvm_vcpu *vcpu, u8 sgi_source_id, int irq)
 
 	kvm_debug("Queue IRQ%d\n", irq);
 
-	lr = vgic_cpu->vgic_irq_lr_map[irq];
-
 	/* Do we have an active interrupt for the same CPUID? */
-	if (lr != LR_EMPTY) {
+	for_each_clear_bit(lr, elrsr_ptr, vgic->nr_lr) {
 		vlr = vgic_get_lr(vcpu, lr);
-		if (vlr.source == sgi_source_id) {
+		if (vlr.irq == irq && vlr.source == sgi_source_id) {
 			kvm_debug("LR%d piggyback for IRQ%d\n", lr, vlr.irq);
-			BUG_ON(!test_bit(lr, vgic_cpu->lr_used));
 			vgic_queue_irq_to_lr(vcpu, irq, lr, vlr);
 			return true;
 		}
 	}
 
 	/* Try to use another LR for this interrupt */
-	lr = find_first_zero_bit((unsigned long *)vgic_cpu->lr_used,
-			       vgic->nr_lr);
+	lr = find_first_bit(elrsr_ptr, vgic->nr_lr);
 	if (lr >= vgic->nr_lr)
 		return false;
 
 	kvm_debug("LR%d allocated for IRQ%d %x\n", lr, irq, sgi_source_id);
-	vgic_cpu->vgic_irq_lr_map[irq] = lr;
-	set_bit(lr, vgic_cpu->lr_used);
 
 	vlr.irq = irq;
 	vlr.source = sgi_source_id;
@@ -1240,7 +1230,7 @@ static void __kvm_vgic_flush_hwstate(struct kvm_vcpu *vcpu)
 	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
 	struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
 	unsigned long *pa_percpu, *pa_shared;
-	int i, vcpu_id, lr, ret;
+	int i, vcpu_id;
 	int overflow = 0;
 	int nr_shared = vgic_nr_shared_irqs(dist);
 
@@ -1295,39 +1285,62 @@ static void __kvm_vgic_flush_hwstate(struct kvm_vcpu *vcpu)
 		 */
 		clear_bit(vcpu_id, dist->irq_pending_on_cpu);
 	}
+}
 
-	for (lr = 0; lr < vgic->nr_lr; lr++) {
-		struct vgic_lr vlr;
+static int process_queued_irq(struct kvm_vcpu *vcpu,
+				   int lr, struct vgic_lr vlr)
+{
+	int pending = 0;
 
-		if (!test_bit(lr, vgic_cpu->lr_used))
-			continue;
+	/*
+	 * If the IRQ was EOIed (called from vgic_process_maintenance) or it
+	 * went from active to non-active (called from vgic_sync_hwirq) it was
+	 * also ACKed and we we therefore assume we can clear the soft pending
+	 * state (should it had been set) for this interrupt.
+	 *
+	 * Note: if the IRQ soft pending state was set after the IRQ was
+	 * acked, it actually shouldn't be cleared, but we have no way of
+	 * knowing that unless we start trapping ACKs when the soft-pending
+	 * state is set.
+	 */
+	vgic_dist_irq_clear_soft_pend(vcpu, vlr.irq);
 
-		vlr = vgic_get_lr(vcpu, lr);
+	/*
+	 * Tell the gic to start sampling this interrupt again.
+	 */
+	vgic_irq_clear_queued(vcpu, vlr.irq);
 
-		/*
-		 * If we have a mapping, and the virtual interrupt is
-		 * presented to the guest (as pending or active), then we must
-		 * set the state to active in the physical world. See
-		 * Documentation/virtual/kvm/arm/vgic-mapped-irqs.txt.
-		 */
-		if (vlr.state & LR_HW) {
-			struct irq_phys_map *map;
-			map = vgic_irq_map_search(vcpu, vlr.irq);
-
-			ret = irq_set_irqchip_state(map->irq,
-						    IRQCHIP_STATE_ACTIVE,
-						    true);
-			WARN_ON(ret);
+	/* Any additional pending interrupt? */
+	if (vgic_irq_is_edge(vcpu, vlr.irq)) {
+		BUG_ON(!(vlr.state & LR_HW));
+		pending = vgic_dist_irq_is_pending(vcpu, vlr.irq);
+	} else {
+		if (vgic_dist_irq_get_level(vcpu, vlr.irq)) {
+			vgic_cpu_irq_set(vcpu, vlr.irq);
+			pending = 1;
+		} else {
+			vgic_dist_irq_clear_pending(vcpu, vlr.irq);
+			vgic_cpu_irq_clear(vcpu, vlr.irq);
 		}
 	}
+
+	/*
+	 * Despite being EOIed, the LR may not have
+	 * been marked as empty.
+	 */
+	vlr.state = 0;
+	vlr.hwirq = 0;
+	vgic_set_lr(vcpu, lr, vlr);
+
+	return pending;
 }
 
 static bool vgic_process_maintenance(struct kvm_vcpu *vcpu)
 {
 	u32 status = vgic_get_interrupt_status(vcpu);
 	struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
-	bool level_pending = false;
 	struct kvm *kvm = vcpu->kvm;
+	int level_pending = 0;
 
 	kvm_debug("STATUS = %08x\n", status);
 
@@ -1342,54 +1355,22 @@ static bool vgic_process_maintenance(struct kvm_vcpu *vcpu)
 
 		for_each_set_bit(lr, eisr_ptr, vgic->nr_lr) {
 			struct vgic_lr vlr = vgic_get_lr(vcpu, lr);
-			WARN_ON(vgic_irq_is_edge(vcpu, vlr.irq));
 
-			spin_lock(&dist->lock);
-			vgic_irq_clear_queued(vcpu, vlr.irq);
+			WARN_ON(vgic_irq_is_edge(vcpu, vlr.irq));
 			WARN_ON(vlr.state & LR_STATE_MASK);
-			vlr.state = 0;
-			vgic_set_lr(vcpu, lr, vlr);
 
-			/*
-			 * If the IRQ was EOIed it was also ACKed and we we
-			 * therefore assume we can clear the soft pending
-			 * state (should it had been set) for this interrupt.
-			 *
-			 * Note: if the IRQ soft pending state was set after
-			 * the IRQ was acked, it actually shouldn't be
-			 * cleared, but we have no way of knowing that unless
-			 * we start trapping ACKs when the soft-pending state
-			 * is set.
-			 */
-			vgic_dist_irq_clear_soft_pend(vcpu, vlr.irq);
 
 			/*
 			 * kvm_notify_acked_irq calls kvm_set_irq()
-			 * to reset the IRQ level. Need to release the
-			 * lock for kvm_set_irq to grab it.
+			 * to reset the IRQ level, which grabs the dist->lock
+			 * so we call this before taking the dist->lock.
 			 */
-			spin_unlock(&dist->lock);
-
 			kvm_notify_acked_irq(kvm, 0,
 					     vlr.irq - VGIC_NR_PRIVATE_IRQS);
-			spin_lock(&dist->lock);
-
-			/* Any additional pending interrupt? */
-			if (vgic_dist_irq_get_level(vcpu, vlr.irq)) {
-				vgic_cpu_irq_set(vcpu, vlr.irq);
-				level_pending = true;
-			} else {
-				vgic_dist_irq_clear_pending(vcpu, vlr.irq);
-				vgic_cpu_irq_clear(vcpu, vlr.irq);
-			}
 
+			spin_lock(&dist->lock);
+			level_pending |= process_queued_irq(vcpu, lr, vlr);
 			spin_unlock(&dist->lock);
-
-			/*
-			 * Despite being EOIed, the LR may not have
-			 * been marked as empty.
-			 */
-			vgic_sync_lr_elrsr(vcpu, lr, vlr);
 		}
 	}
 
@@ -1410,40 +1391,40 @@ static bool vgic_process_maintenance(struct kvm_vcpu *vcpu)
 /*
  * Save the physical active state, and reset it to inactive.
  *
- * Return 1 if HW interrupt went from active to inactive, and 0 otherwise.
+ * Return true if there's a pending forwarded interrupt to queue.
  */
-static int vgic_sync_hwirq(struct kvm_vcpu *vcpu, struct vgic_lr vlr)
+static bool vgic_sync_hwirq(struct kvm_vcpu *vcpu, int lr, struct vgic_lr vlr)
 {
+	struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
 	struct irq_phys_map *map;
+	bool phys_active;
+	bool level_pending;
 	int ret;
 
 	if (!(vlr.state & LR_HW))
-		return 0;
+		return false;
 
 	map = vgic_irq_map_search(vcpu, vlr.irq);
-	BUG_ON(!map || !map->active);
+	BUG_ON(!map);
 
 	ret = irq_get_irqchip_state(map->irq,
 				    IRQCHIP_STATE_ACTIVE,
-				    &map->active);
+				    &phys_active);
 
 	WARN_ON(ret);
 
-	if (map->active) {
-		ret = irq_set_irqchip_state(map->irq,
-					    IRQCHIP_STATE_ACTIVE,
-					    false);
-		WARN_ON(ret);
+	if (phys_active)
 		return 0;
-	}
 
-	return 1;
+	spin_lock(&dist->lock);
+	level_pending = process_queued_irq(vcpu, lr, vlr);
+	spin_unlock(&dist->lock);
+	return level_pending;
 }
 
 /* Sync back the VGIC state after a guest run */
 static void __kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu)
 {
-	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
 	struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
 	u64 elrsr;
 	unsigned long *elrsr_ptr;
@@ -1451,40 +1432,18 @@ static void __kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu)
 	bool level_pending;
 
 	level_pending = vgic_process_maintenance(vcpu);
-	elrsr = vgic_get_elrsr(vcpu);
-	elrsr_ptr = u64_to_bitmask(&elrsr);
 
 	/* Deal with HW interrupts, and clear mappings for empty LRs */
 	for (lr = 0; lr < vgic->nr_lr; lr++) {
-		struct vgic_lr vlr;
-
-		if (!test_bit(lr, vgic_cpu->lr_used))
-			continue;
-
-		vlr = vgic_get_lr(vcpu, lr);
-		if (vgic_sync_hwirq(vcpu, vlr)) {
-			/*
-			 * So this is a HW interrupt that the guest
-			 * EOI-ed. Clean the LR state and allow the
-			 * interrupt to be sampled again.
-			 */
-			vlr.state = 0;
-			vlr.hwirq = 0;
-			vgic_set_lr(vcpu, lr, vlr);
-			vgic_irq_clear_queued(vcpu, vlr.irq);
-			set_bit(lr, elrsr_ptr);
-		}
-
-		if (!test_bit(lr, elrsr_ptr))
-			continue;
-
-		clear_bit(lr, vgic_cpu->lr_used);
+		struct vgic_lr vlr = vgic_get_lr(vcpu, lr);
 
+		level_pending |= vgic_sync_hwirq(vcpu, lr, vlr);
 		BUG_ON(vlr.irq >= dist->nr_irqs);
-		vgic_cpu->vgic_irq_lr_map[vlr.irq] = LR_EMPTY;
 	}
 
 	/* Check if we still have something up our sleeve... */
+	elrsr = vgic_get_elrsr(vcpu);
+	elrsr_ptr = u64_to_bitmask(&elrsr);
 	pending = find_first_zero_bit(elrsr_ptr, vgic->nr_lr);
 	if (level_pending || pending < vgic->nr_lr)
 		set_bit(vcpu->vcpu_id, dist->irq_pending_on_cpu);
@@ -1574,6 +1533,8 @@ static int vgic_update_irq_pending(struct kvm *kvm, int cpuid,
 	int enabled;
 	bool ret = true, can_inject = true;
 
+	trace_vgic_update_irq_pending(cpuid, irq_num, level);
+
 	if (irq_num >= min(kvm->arch.vgic.nr_irqs, 1020))
 		return -EINVAL;
 
@@ -1607,8 +1568,12 @@ static int vgic_update_irq_pending(struct kvm *kvm, int cpuid,
 	} else {
 		if (level_triggered) {
 			vgic_dist_irq_clear_level(vcpu, irq_num);
-			if (!vgic_dist_irq_soft_pend(vcpu, irq_num))
+			if (!vgic_dist_irq_soft_pend(vcpu, irq_num)) {
 				vgic_dist_irq_clear_pending(vcpu, irq_num);
+				vgic_cpu_irq_clear(vcpu, irq_num);
+				if (!compute_pending_for_cpu(vcpu))
+					clear_bit(cpuid, dist->irq_pending_on_cpu);
+			}
 		}
 
 		ret = false;
@@ -1848,30 +1813,6 @@ static void vgic_free_phys_irq_map_rcu(struct rcu_head *rcu)
 	kfree(entry);
 }
 
-/**
- * kvm_vgic_get_phys_irq_active - Return the active state of a mapped IRQ
- *
- * Return the logical active state of a mapped interrupt. This doesn't
- * necessarily reflects the current HW state.
- */
-bool kvm_vgic_get_phys_irq_active(struct irq_phys_map *map)
-{
-	BUG_ON(!map);
-	return map->active;
-}
-
-/**
- * kvm_vgic_set_phys_irq_active - Set the active state of a mapped IRQ
- *
- * Set the logical active state of a mapped interrupt. This doesn't
- * immediately affects the HW state.
- */
-void kvm_vgic_set_phys_irq_active(struct irq_phys_map *map, bool active)
-{
-	BUG_ON(!map);
-	map->active = active;
-}
-
 /**
  * kvm_vgic_unmap_phys_irq - Remove a virtual to physical IRQ mapping
  * @vcpu: The VCPU pointer
@@ -1927,12 +1868,10 @@ void kvm_vgic_vcpu_destroy(struct kvm_vcpu *vcpu)
 	kfree(vgic_cpu->pending_shared);
 	kfree(vgic_cpu->active_shared);
 	kfree(vgic_cpu->pend_act_shared);
-	kfree(vgic_cpu->vgic_irq_lr_map);
 	vgic_destroy_irq_phys_map(vcpu->kvm, &vgic_cpu->irq_phys_map_list);
 	vgic_cpu->pending_shared = NULL;
 	vgic_cpu->active_shared = NULL;
 	vgic_cpu->pend_act_shared = NULL;
-	vgic_cpu->vgic_irq_lr_map = NULL;
 }
 
 static int vgic_vcpu_init_maps(struct kvm_vcpu *vcpu, int nr_irqs)
@@ -1943,18 +1882,14 @@ static int vgic_vcpu_init_maps(struct kvm_vcpu *vcpu, int nr_irqs)
 	vgic_cpu->pending_shared = kzalloc(sz, GFP_KERNEL);
 	vgic_cpu->active_shared = kzalloc(sz, GFP_KERNEL);
 	vgic_cpu->pend_act_shared = kzalloc(sz, GFP_KERNEL);
-	vgic_cpu->vgic_irq_lr_map = kmalloc(nr_irqs, GFP_KERNEL);
 
 	if (!vgic_cpu->pending_shared
 		|| !vgic_cpu->active_shared
-		|| !vgic_cpu->pend_act_shared
-		|| !vgic_cpu->vgic_irq_lr_map) {
+		|| !vgic_cpu->pend_act_shared) {
 		kvm_vgic_vcpu_destroy(vcpu);
 		return -ENOMEM;
 	}
 
-	memset(vgic_cpu->vgic_irq_lr_map, LR_EMPTY, nr_irqs);
-
 	/*
 	 * Store the number of LRs per vcpu, so we don't have to go
 	 * all the way to the distributor structure to find out. Only
@@ -2096,14 +2031,24 @@ int vgic_init(struct kvm *kvm)
 			break;
 		}
 
-		for (i = 0; i < dist->nr_irqs; i++) {
-			if (i < VGIC_NR_PPIS)
+		/*
+		 * Enable and configure all SGIs to be edge-triggere and
+		 * configure all PPIs as level-triggered.
+		 */
+		for (i = 0; i < VGIC_NR_PRIVATE_IRQS; i++) {
+			if (i < VGIC_NR_SGIS) {
+				/* SGIs */
 				vgic_bitmap_set_irq_val(&dist->irq_enabled,
 							vcpu->vcpu_id, i, 1);
-			if (i < VGIC_NR_PRIVATE_IRQS)
 				vgic_bitmap_set_irq_val(&dist->irq_cfg,
 							vcpu->vcpu_id, i,
 							VGIC_CFG_EDGE);
+			} else if (i < VGIC_NR_PRIVATE_IRQS) {
+				/* PPIs */
+				vgic_bitmap_set_irq_val(&dist->irq_cfg,
+							vcpu->vcpu_id, i,
+							VGIC_CFG_LEVEL);
+			}
 		}
 
 		vgic_enable(vcpu);

virt/kvm/kvm_main.c

@@ -2021,6 +2021,8 @@ void kvm_vcpu_block(struct kvm_vcpu *vcpu)
 		} while (single_task_running() && ktime_before(cur, stop));
 	}
 
+	kvm_arch_vcpu_blocking(vcpu);
+
 	for (;;) {
 		prepare_to_wait(&vcpu->wq, &wait, TASK_INTERRUPTIBLE);
 
@@ -2034,6 +2036,7 @@ void kvm_vcpu_block(struct kvm_vcpu *vcpu)
 	finish_wait(&vcpu->wq, &wait);
 	cur = ktime_get();
 
+	kvm_arch_vcpu_unblocking(vcpu);
 out:
 	block_ns = ktime_to_ns(cur) - ktime_to_ns(start);