PCI: Check P2P bridge for invalid secondary/subordinate range

For bridges with "secondary > subordinate", i.e., invalid bus number
apertures, we don't enumerate anything behind the bridge unless the
user specified "pci=assign-busses".

This patch makes us automatically try to reassign the downstream bus
numbers in this case (just for that bridge, not for all bridges as
"pci=assign-busses" does).

We don't discover all the devices on the Intel DP43BF motherboard
without this change (or "pci=assign-busses") because its BIOS configures
a bridge as:

    pci 0000:00:1e.0: PCI bridge to [bus 20-08] (subtractive decode)

[bhelgaas: changelog, change message to dev_info]
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=18412
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=625754Reported-by: NBrian C. Huffman <bhuffman@graze.net>
Reported-by: NVL <vl.homutov@gmail.com>
Tested-by: NVL <vl.homutov@gmail.com>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org

drivers/pci/probe.c

@@ -729,8 +729,10 @@ int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max,
 
 	/* Check if setup is sensible at all */
 	if (!pass &&
-	    (primary != bus->number || secondary <= bus->number)) {
-		dev_dbg(&dev->dev, "bus configuration invalid, reconfiguring\n");
+	    (primary != bus->number || secondary <= bus->number ||
+	     secondary > subordinate)) {
+		dev_info(&dev->dev, "bridge configuration invalid ([bus %02x-%02x]), reconfiguring\n",
+			 secondary, subordinate);
 		broken = 1;
 	}