Merge branch 'wireless-next-2.6' of...

Merge branch 'wireless-next-2.6' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6

MAINTAINERS

@@ -3355,6 +3355,16 @@ F:	Documentation/wimax/README.i2400m
 F:	drivers/net/wimax/i2400m/
 F:	include/linux/wimax/i2400m.h
 
+INTEL PRO/WIRELESS 3945ABG/BG NETWORK CONNECTION SUPPORT
+L:	linux-wireless@vger.kernel.org
+S:	Orphan
+F:	drivers/net/wireless/iwlegacy/
+
+INTEL WIRELESS WIFI 4965AGN NETWORK CONNECTION SUPPORT
+L:	linux-wireless@vger.kernel.org
+S:	Orphan
+F:	drivers/net/wireless/iwlegacy/
+
 INTEL WIRELESS WIFI LINK (iwlwifi)
 M:	Wey-Yi Guy <wey-yi.w.guy@intel.com>
 M:	Intel Linux Wireless <ilw@linux.intel.com>

drivers/net/wireless/iwlwifi/iwl-1000.c

@@ -179,8 +179,6 @@ static struct iwl_lib_ops iwl1000_lib = {
 	.txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
 	.txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl,
 	.txq_set_sched = iwlagn_txq_set_sched,
-	.txq_agg_enable = iwlagn_txq_agg_enable,
-	.txq_agg_disable = iwlagn_txq_agg_disable,
 	.txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
 	.txq_free_tfd = iwl_hw_txq_free_tfd,
 	.txq_init = iwl_hw_tx_queue_init,

drivers/net/wireless/iwlwifi/iwl-2000.c

@@ -259,8 +259,6 @@ static struct iwl_lib_ops iwl2000_lib = {
 	.txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
 	.txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl,
 	.txq_set_sched = iwlagn_txq_set_sched,
-	.txq_agg_enable = iwlagn_txq_agg_enable,
-	.txq_agg_disable = iwlagn_txq_agg_disable,
 	.txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
 	.txq_free_tfd = iwl_hw_txq_free_tfd,
 	.txq_init = iwl_hw_tx_queue_init,
@@ -471,37 +469,6 @@ struct iwl_cfg iwl2030_2bg_cfg = {
 	IWL_DEVICE_2030,
 };
 
-#define IWL_DEVICE_6035						\
-	.fw_name_pre = IWL2030_FW_PRE,				\
-	.ucode_api_max = IWL2030_UCODE_API_MAX,			\
-	.ucode_api_min = IWL2030_UCODE_API_MIN,			\
-	.eeprom_ver = EEPROM_6035_EEPROM_VERSION,		\
-	.eeprom_calib_ver = EEPROM_6035_TX_POWER_VERSION,	\
-	.ops = &iwl2030_ops,					\
-	.mod_params = &iwlagn_mod_params,			\
-	.base_params = &iwl2030_base_params,			\
-	.bt_params = &iwl2030_bt_params,			\
-	.need_dc_calib = true,					\
-	.need_temp_offset_calib = true,				\
-	.led_mode = IWL_LED_RF_STATE,				\
-	.adv_pm = true						\
-
-struct iwl_cfg iwl6035_2agn_cfg = {
-	.name = "2000 Series 2x2 AGN/BT",
-	IWL_DEVICE_6035,
-	.ht_params = &iwl2000_ht_params,
-};
-
-struct iwl_cfg iwl6035_2abg_cfg = {
-	.name = "2000 Series 2x2 ABG/BT",
-	IWL_DEVICE_6035,
-};
-
-struct iwl_cfg iwl6035_2bg_cfg = {
-	.name = "2000 Series 2x2 BG/BT",
-	IWL_DEVICE_6035,
-};
-
 #define IWL_DEVICE_200						\
 	.fw_name_pre = IWL200_FW_PRE,				\
 	.ucode_api_max = IWL200_UCODE_API_MAX,			\

drivers/net/wireless/iwlwifi/iwl-5000.c

@@ -348,8 +348,6 @@ static struct iwl_lib_ops iwl5000_lib = {
 	.txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
 	.txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl,
 	.txq_set_sched = iwlagn_txq_set_sched,
-	.txq_agg_enable = iwlagn_txq_agg_enable,
-	.txq_agg_disable = iwlagn_txq_agg_disable,
 	.txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
 	.txq_free_tfd = iwl_hw_txq_free_tfd,
 	.txq_init = iwl_hw_tx_queue_init,
@@ -416,8 +414,6 @@ static struct iwl_lib_ops iwl5150_lib = {
 	.txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
 	.txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl,
 	.txq_set_sched = iwlagn_txq_set_sched,
-	.txq_agg_enable = iwlagn_txq_agg_enable,
-	.txq_agg_disable = iwlagn_txq_agg_disable,
 	.txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
 	.txq_free_tfd = iwl_hw_txq_free_tfd,
 	.txq_init = iwl_hw_tx_queue_init,

drivers/net/wireless/iwlwifi/iwl-6000.c

@@ -288,8 +288,6 @@ static struct iwl_lib_ops iwl6000_lib = {
 	.txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
 	.txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl,
 	.txq_set_sched = iwlagn_txq_set_sched,
-	.txq_agg_enable = iwlagn_txq_agg_enable,
-	.txq_agg_disable = iwlagn_txq_agg_disable,
 	.txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
 	.txq_free_tfd = iwl_hw_txq_free_tfd,
 	.txq_init = iwl_hw_tx_queue_init,
@@ -357,8 +355,6 @@ static struct iwl_lib_ops iwl6030_lib = {
 	.txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
 	.txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl,
 	.txq_set_sched = iwlagn_txq_set_sched,
-	.txq_agg_enable = iwlagn_txq_agg_enable,
-	.txq_agg_disable = iwlagn_txq_agg_disable,
 	.txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
 	.txq_free_tfd = iwl_hw_txq_free_tfd,
 	.txq_init = iwl_hw_tx_queue_init,
@@ -613,6 +609,22 @@ struct iwl_cfg iwl6030_2bg_cfg = {
 	IWL_DEVICE_6030,
 };
 
+struct iwl_cfg iwl6035_2agn_cfg = {
+	.name = "6035 Series 2x2 AGN/BT",
+	IWL_DEVICE_6030,
+	.ht_params = &iwl6000_ht_params,
+};
+
+struct iwl_cfg iwl6035_2abg_cfg = {
+	.name = "6035 Series 2x2 ABG/BT",
+	IWL_DEVICE_6030,
+};
+
+struct iwl_cfg iwl6035_2bg_cfg = {
+	.name = "6035 Series 2x2 BG/BT",
+	IWL_DEVICE_6030,
+};
+
 struct iwl_cfg iwl1030_bgn_cfg = {
 	.name = "Intel(R) Centrino(R) Wireless-N 1030 BGN",
 	IWL_DEVICE_6030,

drivers/net/wireless/iwlwifi/iwl-agn-ict.c

@@ -59,8 +59,6 @@ void iwl_free_isr_ict(struct iwl_priv *priv)
 int iwl_alloc_isr_ict(struct iwl_priv *priv)
 {
 
-	if (priv->cfg->base_params->use_isr_legacy)
-		return 0;
 	/* allocate shrared data table */
 	priv->_agn.ict_tbl_vir =
 		dma_alloc_coherent(&priv->pci_dev->dev,

drivers/net/wireless/iwlwifi/iwl-agn-lib.c

@@ -652,8 +652,7 @@ int iwlagn_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
 	const u32 rfdnlog = RX_QUEUE_SIZE_LOG; /* 256 RBDs */
 	u32 rb_timeout = 0; /* FIXME: RX_RB_TIMEOUT for all devices? */
 
-	if (!priv->cfg->base_params->use_isr_legacy)
-		rb_timeout = RX_RB_TIMEOUT;
+	rb_timeout = RX_RB_TIMEOUT;
 
 	if (priv->cfg->mod_params->amsdu_size_8K)
 		rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K;

drivers/net/wireless/iwlwifi/iwl-agn-rs.c

@@ -115,13 +115,18 @@ const struct iwl_rate_info iwl_rates[IWL_RATE_COUNT] = {
 	/* FIXME:RS:          ^^    should be INV (legacy) */
 };
 
+static inline u8 rs_extract_rate(u32 rate_n_flags)
+{
+	return (u8)(rate_n_flags & RATE_MCS_RATE_MSK);
+}
+
 static int iwl_hwrate_to_plcp_idx(u32 rate_n_flags)
 {
 	int idx = 0;
 
 	/* HT rate format */
 	if (rate_n_flags & RATE_MCS_HT_MSK) {
-		idx = (rate_n_flags & 0xff);
+		idx = rs_extract_rate(rate_n_flags);
 
 		if (idx >= IWL_RATE_MIMO3_6M_PLCP)
 			idx = idx - IWL_RATE_MIMO3_6M_PLCP;
@@ -138,7 +143,8 @@ static int iwl_hwrate_to_plcp_idx(u32 rate_n_flags)
 	/* legacy rate format, search for match in table */
 	} else {
 		for (idx = 0; idx < ARRAY_SIZE(iwl_rates); idx++)
-			if (iwl_rates[idx].plcp == (rate_n_flags & 0xFF))
+			if (iwl_rates[idx].plcp ==
+					rs_extract_rate(rate_n_flags))
 				return idx;
 	}
 
@@ -239,11 +245,6 @@ static const struct iwl_rate_mcs_info iwl_rate_mcs[IWL_RATE_COUNT] = {
 
 #define MCS_INDEX_PER_STREAM	(8)
 
-static inline u8 rs_extract_rate(u32 rate_n_flags)
-{
-	return (u8)(rate_n_flags & 0xFF);
-}
-
 static void rs_rate_scale_clear_window(struct iwl_rate_scale_data *window)
 {
 	window->data = 0;
@@ -2912,7 +2913,8 @@ static void rs_fill_link_cmd(struct iwl_priv *priv,
 		ant_toggle_cnt = 1;
 		repeat_rate = IWL_NUMBER_TRY;
 	} else {
-		repeat_rate = IWL_HT_NUMBER_TRY;
+		repeat_rate = min(IWL_HT_NUMBER_TRY,
+				  LINK_QUAL_AGG_DISABLE_START_DEF - 1);
 	}
 
 	lq_cmd->general_params.mimo_delimiter =

drivers/net/wireless/iwlwifi/iwl-agn-tx.c

@@ -222,13 +222,8 @@ void iwlagn_tx_queue_set_status(struct iwl_priv *priv,
 		       scd_retry ? "BA" : "AC/CMD", txq_id, tx_fifo_id);
 }
 
-int iwlagn_txq_agg_enable(struct iwl_priv *priv, int txq_id,
-			  int tx_fifo, int sta_id, int tid, u16 ssn_idx)
+static int iwlagn_txq_agg_enable(struct iwl_priv *priv, int txq_id, int sta_id, int tid)
 {
-	unsigned long flags;
-	u16 ra_tid;
-	int ret;
-
 	if ((IWLAGN_FIRST_AMPDU_QUEUE > txq_id) ||
 	    (IWLAGN_FIRST_AMPDU_QUEUE +
 		priv->cfg->base_params->num_of_ampdu_queues <= txq_id)) {
@@ -240,12 +235,33 @@ int iwlagn_txq_agg_enable(struct iwl_priv *priv, int txq_id,
 		return -EINVAL;
 	}
 
-	ra_tid = BUILD_RAxTID(sta_id, tid);
-
 	/* Modify device's station table to Tx this TID */
-	ret = iwl_sta_tx_modify_enable_tid(priv, sta_id, tid);
-	if (ret)
-		return ret;
+	return iwl_sta_tx_modify_enable_tid(priv, sta_id, tid);
+}
+
+void iwlagn_txq_agg_queue_setup(struct iwl_priv *priv,
+				struct ieee80211_sta *sta,
+				int tid, int frame_limit)
+{
+	int sta_id, tx_fifo, txq_id, ssn_idx;
+	u16 ra_tid;
+	unsigned long flags;
+	struct iwl_tid_data *tid_data;
+
+	sta_id = iwl_sta_id(sta);
+	if (WARN_ON(sta_id == IWL_INVALID_STATION))
+		return;
+	if (WARN_ON(tid >= MAX_TID_COUNT))
+		return;
+
+	spin_lock_irqsave(&priv->sta_lock, flags);
+	tid_data = &priv->stations[sta_id].tid[tid];
+	ssn_idx = SEQ_TO_SN(tid_data->seq_number);
+	txq_id = tid_data->agg.txq_id;
+	tx_fifo = tid_data->agg.tx_fifo;
+	spin_unlock_irqrestore(&priv->sta_lock, flags);
+
+	ra_tid = BUILD_RAxTID(sta_id, tid);
 
 	spin_lock_irqsave(&priv->lock, flags);
 
@@ -271,10 +287,10 @@ int iwlagn_txq_agg_enable(struct iwl_priv *priv, int txq_id,
 	iwl_write_targ_mem(priv, priv->scd_base_addr +
 			IWLAGN_SCD_CONTEXT_QUEUE_OFFSET(txq_id) +
 			sizeof(u32),
-			((SCD_WIN_SIZE <<
+			((frame_limit <<
 			IWLAGN_SCD_QUEUE_CTX_REG2_WIN_SIZE_POS) &
 			IWLAGN_SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK) |
-			((SCD_FRAME_LIMIT <<
+			((frame_limit <<
 			IWLAGN_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) &
 			IWLAGN_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK));
 
@@ -284,12 +300,10 @@ int iwlagn_txq_agg_enable(struct iwl_priv *priv, int txq_id,
 	iwlagn_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 1);
 
 	spin_unlock_irqrestore(&priv->lock, flags);
-
-	return 0;
 }
 
-int iwlagn_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
-			   u16 ssn_idx, u8 tx_fifo)
+static int iwlagn_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
+				  u16 ssn_idx, u8 tx_fifo)
 {
 	if ((IWLAGN_FIRST_AMPDU_QUEUE > txq_id) ||
 	    (IWLAGN_FIRST_AMPDU_QUEUE +
@@ -1034,11 +1048,11 @@ int iwlagn_tx_agg_start(struct iwl_priv *priv, struct ieee80211_vif *vif,
 	tid_data = &priv->stations[sta_id].tid[tid];
 	*ssn = SEQ_TO_SN(tid_data->seq_number);
 	tid_data->agg.txq_id = txq_id;
+	tid_data->agg.tx_fifo = tx_fifo;
 	iwl_set_swq_id(&priv->txq[txq_id], get_ac_from_tid(tid), txq_id);
 	spin_unlock_irqrestore(&priv->sta_lock, flags);
 
-	ret = priv->cfg->ops->lib->txq_agg_enable(priv, txq_id, tx_fifo,
-						  sta_id, tid, *ssn);
+	ret = iwlagn_txq_agg_enable(priv, txq_id, sta_id, tid);
 	if (ret)
 		return ret;
 
@@ -1125,8 +1139,7 @@ int iwlagn_tx_agg_stop(struct iwl_priv *priv, struct ieee80211_vif *vif,
 	 * to deactivate the uCode queue, just return "success" to allow
 	 *  mac80211 to clean up it own data.
 	 */
-	priv->cfg->ops->lib->txq_agg_disable(priv, txq_id, ssn,
-						   tx_fifo_id);
+	iwlagn_txq_agg_disable(priv, txq_id, ssn, tx_fifo_id);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
@@ -1155,8 +1168,7 @@ int iwlagn_txq_check_empty(struct iwl_priv *priv,
 			u16 ssn = SEQ_TO_SN(tid_data->seq_number);
 			int tx_fifo = get_fifo_from_tid(ctx, tid);
 			IWL_DEBUG_HT(priv, "HW queue empty: continue DELBA flow\n");
-			priv->cfg->ops->lib->txq_agg_disable(priv, txq_id,
-							     ssn, tx_fifo);
+			iwlagn_txq_agg_disable(priv, txq_id, ssn, tx_fifo);
 			tid_data->agg.state = IWL_AGG_OFF;
 			ieee80211_stop_tx_ba_cb_irqsafe(ctx->vif, addr, tid);
 		}
@@ -1251,11 +1263,11 @@ static int iwlagn_tx_status_reply_compressed_ba(struct iwl_priv *priv,
 				 struct iwl_compressed_ba_resp *ba_resp)
 
 {
-	int i, sh, ack;
+	int sh;
 	u16 seq_ctl = le16_to_cpu(ba_resp->seq_ctl);
 	u16 scd_flow = le16_to_cpu(ba_resp->scd_flow);
-	int successes = 0;
 	struct ieee80211_tx_info *info;
+	u64 bitmap, sent_bitmap;
 
 	if (unlikely(!agg->wait_for_ba))  {
 		if (unlikely(ba_resp->bitmap))
@@ -1269,70 +1281,42 @@ static int iwlagn_tx_status_reply_compressed_ba(struct iwl_priv *priv,
 
 	/* Calculate shift to align block-ack bits with our Tx window bits */
 	sh = agg->start_idx - SEQ_TO_INDEX(seq_ctl >> 4);
-	if (sh < 0) /* tbw something is wrong with indices */
+	if (sh < 0)
 		sh += 0x100;
 
-	if (agg->frame_count > (64 - sh)) {
-		IWL_DEBUG_TX_REPLY(priv, "more frames than bitmap size");
-		return -1;
-	}
-	if (!priv->cfg->base_params->no_agg_framecnt_info && ba_resp->txed) {
+	/*
+	 * Check for success or failure according to the
+	 * transmitted bitmap and block-ack bitmap
+	 */
+	bitmap = le64_to_cpu(ba_resp->bitmap) >> sh;
+	sent_bitmap = bitmap & agg->bitmap;
+
+	/* Sanity check values reported by uCode */
+	if (ba_resp->txed_2_done > ba_resp->txed) {
+		IWL_DEBUG_TX_REPLY(priv,
+			"bogus sent(%d) and ack(%d) count\n",
+			ba_resp->txed, ba_resp->txed_2_done);
 		/*
-		 * sent and ack information provided by uCode
-		 * use it instead of figure out ourself
+		 * set txed_2_done = txed,
+		 * so it won't impact rate scale
 		 */
-		if (ba_resp->txed_2_done > ba_resp->txed) {
-			IWL_DEBUG_TX_REPLY(priv,
-				"bogus sent(%d) and ack(%d) count\n",
-				ba_resp->txed, ba_resp->txed_2_done);
-			/*
-			 * set txed_2_done = txed,
-			 * so it won't impact rate scale
-			 */
-			ba_resp->txed = ba_resp->txed_2_done;
-		}
-		IWL_DEBUG_HT(priv, "agg frames sent:%d, acked:%d\n",
-				ba_resp->txed, ba_resp->txed_2_done);
-	} else {
-		u64 bitmap, sent_bitmap;
-
-		/* don't use 64-bit values for now */
-		bitmap = le64_to_cpu(ba_resp->bitmap) >> sh;
-
-		/* check for success or failure according to the
-		 * transmitted bitmap and block-ack bitmap */
-		sent_bitmap = bitmap & agg->bitmap;
-
-		/* For each frame attempted in aggregation,
-		 * update driver's record of tx frame's status. */
-		i = 0;
-		while (sent_bitmap) {
-			ack = sent_bitmap & 1ULL;
-			successes += ack;
-			IWL_DEBUG_TX_REPLY(priv, "%s ON i=%d idx=%d raw=%d\n",
-				ack ? "ACK" : "NACK", i,
-				(agg->start_idx + i) & 0xff,
-				agg->start_idx + i);
-			sent_bitmap >>= 1;
-			++i;
-		}
+		ba_resp->txed = ba_resp->txed_2_done;
+	}
+	IWL_DEBUG_HT(priv, "agg frames sent:%d, acked:%d\n",
+			ba_resp->txed, ba_resp->txed_2_done);
 
-		IWL_DEBUG_TX_REPLY(priv, "Bitmap %llx\n",
-				   (unsigned long long)bitmap);
+	/* Find the first ACKed frame to store the TX status */
+	while (sent_bitmap && !(sent_bitmap & 1)) {
+		agg->start_idx = (agg->start_idx + 1) & 0xff;
+		sent_bitmap >>= 1;
 	}
 
 	info = IEEE80211_SKB_CB(priv->txq[scd_flow].txb[agg->start_idx].skb);
 	memset(&info->status, 0, sizeof(info->status));
 	info->flags |= IEEE80211_TX_STAT_ACK;
 	info->flags |= IEEE80211_TX_STAT_AMPDU;
-	if (!priv->cfg->base_params->no_agg_framecnt_info && ba_resp->txed) {
-		info->status.ampdu_ack_len = ba_resp->txed_2_done;
-		info->status.ampdu_len = ba_resp->txed;
-
-	} else {
-		info->status.ampdu_ack_len = successes;
-		info->status.ampdu_len = agg->frame_count;
-	}
+	info->status.ampdu_ack_len = ba_resp->txed_2_done;
+	info->status.ampdu_len = ba_resp->txed;
 	iwlagn_hwrate_to_tx_control(priv, agg->rate_n_flags, info);
 
 	return 0;

drivers/net/wireless/iwlwifi/iwl-agn.c

@@ -409,7 +409,7 @@ int iwl_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv,
  * Tell nic where to find circular buffer of Tx Frame Descriptors for
  * given Tx queue, and enable the DMA channel used for that queue.
  *
- * 4965 supports up to 16 Tx queues in DRAM, mapped to up to 8 Tx DMA
+ * supports up to 16 Tx queues in DRAM, mapped to up to 8 Tx DMA
  * channels supported in hardware.
  */
 int iwl_hw_tx_queue_init(struct iwl_priv *priv,
@@ -845,191 +845,6 @@ static inline void iwl_synchronize_irq(struct iwl_priv *priv)
 	tasklet_kill(&priv->irq_tasklet);
 }
 
-static void iwl_irq_tasklet_legacy(struct iwl_priv *priv)
-{
-	u32 inta, handled = 0;
-	u32 inta_fh;
-	unsigned long flags;
-	u32 i;
-#ifdef CONFIG_IWLWIFI_DEBUG
-	u32 inta_mask;
-#endif
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	/* Ack/clear/reset pending uCode interrupts.
-	 * Note:  Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
-	 *  and will clear only when CSR_FH_INT_STATUS gets cleared. */
-	inta = iwl_read32(priv, CSR_INT);
-	iwl_write32(priv, CSR_INT, inta);
-
-	/* Ack/clear/reset pending flow-handler (DMA) interrupts.
-	 * Any new interrupts that happen after this, either while we're
-	 * in this tasklet, or later, will show up in next ISR/tasklet. */
-	inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
-	iwl_write32(priv, CSR_FH_INT_STATUS, inta_fh);
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-	if (iwl_get_debug_level(priv) & IWL_DL_ISR) {
-		/* just for debug */
-		inta_mask = iwl_read32(priv, CSR_INT_MASK);
-		IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
-			      inta, inta_mask, inta_fh);
-	}
-#endif
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	/* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
-	 * atomic, make sure that inta covers all the interrupts that
-	 * we've discovered, even if FH interrupt came in just after
-	 * reading CSR_INT. */
-	if (inta_fh & CSR49_FH_INT_RX_MASK)
-		inta |= CSR_INT_BIT_FH_RX;
-	if (inta_fh & CSR49_FH_INT_TX_MASK)
-		inta |= CSR_INT_BIT_FH_TX;
-
-	/* Now service all interrupt bits discovered above. */
-	if (inta & CSR_INT_BIT_HW_ERR) {
-		IWL_ERR(priv, "Hardware error detected.  Restarting.\n");
-
-		/* Tell the device to stop sending interrupts */
-		iwl_disable_interrupts(priv);
-
-		priv->isr_stats.hw++;
-		iwl_irq_handle_error(priv);
-
-		handled |= CSR_INT_BIT_HW_ERR;
-
-		return;
-	}
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-	if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
-		/* NIC fires this, but we don't use it, redundant with WAKEUP */
-		if (inta & CSR_INT_BIT_SCD) {
-			IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
-				      "the frame/frames.\n");
-			priv->isr_stats.sch++;
-		}
-
-		/* Alive notification via Rx interrupt will do the real work */
-		if (inta & CSR_INT_BIT_ALIVE) {
-			IWL_DEBUG_ISR(priv, "Alive interrupt\n");
-			priv->isr_stats.alive++;
-		}
-	}
-#endif
-	/* Safely ignore these bits for debug checks below */
-	inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
-
-	/* HW RF KILL switch toggled */
-	if (inta & CSR_INT_BIT_RF_KILL) {
-		int hw_rf_kill = 0;
-		if (!(iwl_read32(priv, CSR_GP_CNTRL) &
-				CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
-			hw_rf_kill = 1;
-
-		IWL_WARN(priv, "RF_KILL bit toggled to %s.\n",
-				hw_rf_kill ? "disable radio" : "enable radio");
-
-		priv->isr_stats.rfkill++;
-
-		/* driver only loads ucode once setting the interface up.
-		 * the driver allows loading the ucode even if the radio
-		 * is killed. Hence update the killswitch state here. The
-		 * rfkill handler will care about restarting if needed.
-		 */
-		if (!test_bit(STATUS_ALIVE, &priv->status)) {
-			if (hw_rf_kill)
-				set_bit(STATUS_RF_KILL_HW, &priv->status);
-			else
-				clear_bit(STATUS_RF_KILL_HW, &priv->status);
-			wiphy_rfkill_set_hw_state(priv->hw->wiphy, hw_rf_kill);
-		}
-
-		handled |= CSR_INT_BIT_RF_KILL;
-	}
-
-	/* Chip got too hot and stopped itself */
-	if (inta & CSR_INT_BIT_CT_KILL) {
-		IWL_ERR(priv, "Microcode CT kill error detected.\n");
-		priv->isr_stats.ctkill++;
-		handled |= CSR_INT_BIT_CT_KILL;
-	}
-
-	/* Error detected by uCode */
-	if (inta & CSR_INT_BIT_SW_ERR) {
-		IWL_ERR(priv, "Microcode SW error detected. "
-			" Restarting 0x%X.\n", inta);
-		priv->isr_stats.sw++;
-		iwl_irq_handle_error(priv);
-		handled |= CSR_INT_BIT_SW_ERR;
-	}
-
-	/*
-	 * uCode wakes up after power-down sleep.
-	 * Tell device about any new tx or host commands enqueued,
-	 * and about any Rx buffers made available while asleep.
-	 */
-	if (inta & CSR_INT_BIT_WAKEUP) {
-		IWL_DEBUG_ISR(priv, "Wakeup interrupt\n");
-		iwl_rx_queue_update_write_ptr(priv, &priv->rxq);
-		for (i = 0; i < priv->hw_params.max_txq_num; i++)
-			iwl_txq_update_write_ptr(priv, &priv->txq[i]);
-		priv->isr_stats.wakeup++;
-		handled |= CSR_INT_BIT_WAKEUP;
-	}
-
-	/* All uCode command responses, including Tx command responses,
-	 * Rx "responses" (frame-received notification), and other
-	 * notifications from uCode come through here*/
-	if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
-		iwl_rx_handle(priv);
-		priv->isr_stats.rx++;
-		handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
-	}
-
-	/* This "Tx" DMA channel is used only for loading uCode */
-	if (inta & CSR_INT_BIT_FH_TX) {
-		IWL_DEBUG_ISR(priv, "uCode load interrupt\n");
-		priv->isr_stats.tx++;
-		handled |= CSR_INT_BIT_FH_TX;
-		/* Wake up uCode load routine, now that load is complete */
-		priv->ucode_write_complete = 1;
-		wake_up_interruptible(&priv->wait_command_queue);
-	}
-
-	if (inta & ~handled) {
-		IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled);
-		priv->isr_stats.unhandled++;
-	}
-
-	if (inta & ~(priv->inta_mask)) {
-		IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n",
-			 inta & ~priv->inta_mask);
-		IWL_WARN(priv, "   with FH_INT = 0x%08x\n", inta_fh);
-	}
-
-	/* Re-enable all interrupts */
-	/* only Re-enable if disabled by irq */
-	if (test_bit(STATUS_INT_ENABLED, &priv->status))
-		iwl_enable_interrupts(priv);
-	/* Re-enable RF_KILL if it occurred */
-	else if (handled & CSR_INT_BIT_RF_KILL)
-		iwl_enable_rfkill_int(priv);
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-	if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
-		inta = iwl_read32(priv, CSR_INT);
-		inta_mask = iwl_read32(priv, CSR_INT_MASK);
-		inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
-		IWL_DEBUG_ISR(priv, "End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
-			"flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
-	}
-#endif
-}
-
 /* tasklet for iwlagn interrupt */
 static void iwl_irq_tasklet(struct iwl_priv *priv)
 {
@@ -1171,7 +986,7 @@ static void iwl_irq_tasklet(struct iwl_priv *priv)
 		if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
 			handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
 			iwl_write32(priv, CSR_FH_INT_STATUS,
-					CSR49_FH_INT_RX_MASK);
+					CSR_FH_INT_RX_MASK);
 		}
 		if (inta & CSR_INT_BIT_RX_PERIODIC) {
 			handled |= CSR_INT_BIT_RX_PERIODIC;
@@ -1209,7 +1024,7 @@ static void iwl_irq_tasklet(struct iwl_priv *priv)
 
 	/* This "Tx" DMA channel is used only for loading uCode */
 	if (inta & CSR_INT_BIT_FH_TX) {
-		iwl_write32(priv, CSR_FH_INT_STATUS, CSR49_FH_INT_TX_MASK);
+		iwl_write32(priv, CSR_FH_INT_STATUS, CSR_FH_INT_TX_MASK);
 		IWL_DEBUG_ISR(priv, "uCode load interrupt\n");
 		priv->isr_stats.tx++;
 		handled |= CSR_INT_BIT_FH_TX;
@@ -1444,28 +1259,19 @@ static int iwlagn_load_legacy_firmware(struct iwl_priv *priv,
 
 	switch (api_ver) {
 	default:
-		/*
-		 * 4965 doesn't revision the firmware file format
-		 * along with the API version, it always uses v1
-		 * file format.
-		 */
-		if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) !=
-				CSR_HW_REV_TYPE_4965) {
-			hdr_size = 28;
-			if (ucode_raw->size < hdr_size) {
-				IWL_ERR(priv, "File size too small!\n");
-				return -EINVAL;
-			}
-			pieces->build = le32_to_cpu(ucode->u.v2.build);
-			pieces->inst_size = le32_to_cpu(ucode->u.v2.inst_size);
-			pieces->data_size = le32_to_cpu(ucode->u.v2.data_size);
-			pieces->init_size = le32_to_cpu(ucode->u.v2.init_size);
-			pieces->init_data_size = le32_to_cpu(ucode->u.v2.init_data_size);
-			pieces->boot_size = le32_to_cpu(ucode->u.v2.boot_size);
-			src = ucode->u.v2.data;
-			break;
+		hdr_size = 28;
+		if (ucode_raw->size < hdr_size) {
+			IWL_ERR(priv, "File size too small!\n");
+			return -EINVAL;
 		}
-		/* fall through for 4965 */
+		pieces->build = le32_to_cpu(ucode->u.v2.build);
+		pieces->inst_size = le32_to_cpu(ucode->u.v2.inst_size);
+		pieces->data_size = le32_to_cpu(ucode->u.v2.data_size);
+		pieces->init_size = le32_to_cpu(ucode->u.v2.init_size);
+		pieces->init_data_size = le32_to_cpu(ucode->u.v2.init_data_size);
+		pieces->boot_size = le32_to_cpu(ucode->u.v2.boot_size);
+		src = ucode->u.v2.data;
+		break;
 	case 0:
 	case 1:
 	case 2:
@@ -3348,6 +3154,10 @@ int iwlagn_mac_ampdu_action(struct ieee80211_hw *hw,
 		}
 		break;
 	case IEEE80211_AMPDU_TX_OPERATIONAL:
+		buf_size = min_t(int, buf_size, LINK_QUAL_AGG_FRAME_LIMIT_DEF);
+
+		iwlagn_txq_agg_queue_setup(priv, sta, tid, buf_size);
+
 		/*
 		 * If the limit is 0, then it wasn't initialised yet,
 		 * use the default. We can do that since we take the
@@ -3750,12 +3560,8 @@ static void iwl_setup_deferred_work(struct iwl_priv *priv)
 	priv->watchdog.data = (unsigned long)priv;
 	priv->watchdog.function = iwl_bg_watchdog;
 
-	if (!priv->cfg->base_params->use_isr_legacy)
-		tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
-			iwl_irq_tasklet, (unsigned long)priv);
-	else
-		tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
-			iwl_irq_tasklet_legacy, (unsigned long)priv);
+	tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
+		iwl_irq_tasklet, (unsigned long)priv);
 }
 
 static void iwl_cancel_deferred_work(struct iwl_priv *priv)
@@ -3968,14 +3774,6 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	 * 1. Allocating HW data
 	 ************************/
 
-	/* Disabling hardware scan means that mac80211 will perform scans
-	 * "the hard way", rather than using device's scan. */
-	if (cfg->mod_params->disable_hw_scan) {
-		dev_printk(KERN_DEBUG, &(pdev->dev),
-			"sw scan support is deprecated\n");
-		iwlagn_hw_ops.hw_scan = NULL;
-	}
-
 	hw = iwl_alloc_all(cfg);
 	if (!hw) {
 		err = -ENOMEM;
@@ -4585,43 +4383,21 @@ module_exit(iwl_exit);
 module_init(iwl_init);
 
 #ifdef CONFIG_IWLWIFI_DEBUG
-module_param_named(debug50, iwl_debug_level, uint, S_IRUGO);
-MODULE_PARM_DESC(debug50, "50XX debug output mask (deprecated)");
 module_param_named(debug, iwl_debug_level, uint, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "debug output mask");
 #endif
 
-module_param_named(swcrypto50, iwlagn_mod_params.sw_crypto, bool, S_IRUGO);
-MODULE_PARM_DESC(swcrypto50,
-		 "using crypto in software (default 0 [hardware]) (deprecated)");
 module_param_named(swcrypto, iwlagn_mod_params.sw_crypto, int, S_IRUGO);
 MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
-module_param_named(queues_num50,
-		   iwlagn_mod_params.num_of_queues, int, S_IRUGO);
-MODULE_PARM_DESC(queues_num50,
-		 "number of hw queues in 50xx series (deprecated)");
 module_param_named(queues_num, iwlagn_mod_params.num_of_queues, int, S_IRUGO);
 MODULE_PARM_DESC(queues_num, "number of hw queues.");
-module_param_named(11n_disable50, iwlagn_mod_params.disable_11n, int, S_IRUGO);
-MODULE_PARM_DESC(11n_disable50, "disable 50XX 11n functionality (deprecated)");
 module_param_named(11n_disable, iwlagn_mod_params.disable_11n, int, S_IRUGO);
 MODULE_PARM_DESC(11n_disable, "disable 11n functionality");
-module_param_named(amsdu_size_8K50, iwlagn_mod_params.amsdu_size_8K,
-		   int, S_IRUGO);
-MODULE_PARM_DESC(amsdu_size_8K50,
-		 "enable 8K amsdu size in 50XX series (deprecated)");
 module_param_named(amsdu_size_8K, iwlagn_mod_params.amsdu_size_8K,
 		   int, S_IRUGO);
 MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size");
-module_param_named(fw_restart50, iwlagn_mod_params.restart_fw, int, S_IRUGO);
-MODULE_PARM_DESC(fw_restart50,
-		 "restart firmware in case of error (deprecated)");
 module_param_named(fw_restart, iwlagn_mod_params.restart_fw, int, S_IRUGO);
 MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");
-module_param_named(
-	disable_hw_scan, iwlagn_mod_params.disable_hw_scan, int, S_IRUGO);
-MODULE_PARM_DESC(disable_hw_scan,
-		 "disable hardware scanning (default 0) (deprecated)");
 
 module_param_named(ucode_alternative, iwlagn_wanted_ucode_alternative, int,
 		   S_IRUGO);

drivers/net/wireless/iwlwifi/iwl-agn.h

@@ -133,10 +133,6 @@ void iwlagn_txq_update_byte_cnt_tbl(struct iwl_priv *priv,
 				    u16 byte_cnt);
 void iwlagn_txq_inval_byte_cnt_tbl(struct iwl_priv *priv,
 				   struct iwl_tx_queue *txq);
-int iwlagn_txq_agg_enable(struct iwl_priv *priv, int txq_id,
-			  int tx_fifo, int sta_id, int tid, u16 ssn_idx);
-int iwlagn_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
-			   u16 ssn_idx, u8 tx_fifo);
 void iwlagn_txq_set_sched(struct iwl_priv *priv, u32 mask);
 void iwl_free_tfds_in_queue(struct iwl_priv *priv,
 			    int sta_id, int tid, int freed);
@@ -206,6 +202,9 @@ int iwlagn_tx_agg_start(struct iwl_priv *priv, struct ieee80211_vif *vif,
 			struct ieee80211_sta *sta, u16 tid, u16 *ssn);
 int iwlagn_tx_agg_stop(struct iwl_priv *priv, struct ieee80211_vif *vif,
 		       struct ieee80211_sta *sta, u16 tid);
+void iwlagn_txq_agg_queue_setup(struct iwl_priv *priv,
+				struct ieee80211_sta *sta,
+				int tid, int frame_limit);
 int iwlagn_txq_check_empty(struct iwl_priv *priv,
 			   int sta_id, u8 tid, int txq_id);
 void iwlagn_rx_reply_compressed_ba(struct iwl_priv *priv,
@@ -311,7 +310,7 @@ static inline u32 iwl_ant_idx_to_flags(u8 ant_idx)
 
 static inline u8 iwl_hw_get_rate(__le32 rate_n_flags)
 {
-	return le32_to_cpu(rate_n_flags) & 0xFF;
+	return le32_to_cpu(rate_n_flags) & RATE_MCS_RATE_MSK;
 }
 
 static inline __le32 iwl_hw_set_rate_n_flags(u8 rate, u32 flags)

drivers/net/wireless/iwlwifi/iwl-commands.h

@@ -324,6 +324,8 @@ struct iwl3945_power_per_rate {
 #define RATE_MCS_SPATIAL_MSK 0x18
 #define RATE_MCS_HT_DUP_POS 5
 #define RATE_MCS_HT_DUP_MSK 0x20
+/* Both legacy and HT use bits 7:0 as the CCK/OFDM rate or HT MCS */
+#define RATE_MCS_RATE_MSK 0xff
 
 /* Bit 8: (1) HT format, (0) legacy format in bits 7:0 */
 #define RATE_MCS_FLAGS_POS 8
@@ -2130,7 +2132,7 @@ struct iwl_link_qual_general_params {
 #define LINK_QUAL_AGG_DISABLE_START_MAX	(255)
 #define LINK_QUAL_AGG_DISABLE_START_MIN	(0)
 
-#define LINK_QUAL_AGG_FRAME_LIMIT_DEF	(31)
+#define LINK_QUAL_AGG_FRAME_LIMIT_DEF	(63)
 #define LINK_QUAL_AGG_FRAME_LIMIT_MAX	(63)
 #define LINK_QUAL_AGG_FRAME_LIMIT_MIN	(0)
 

drivers/net/wireless/iwlwifi/iwl-core.h

@@ -171,11 +171,6 @@ struct iwl_lib_ops {
 			     struct iwl_tx_queue *txq);
 	int (*txq_init)(struct iwl_priv *priv,
 			struct iwl_tx_queue *txq);
-	/* aggregations */
-	int (*txq_agg_enable)(struct iwl_priv *priv, int txq_id, int tx_fifo,
-			      int sta_id, int tid, u16 ssn_idx);
-	int (*txq_agg_disable)(struct iwl_priv *priv, u16 txq_id, u16 ssn_idx,
-			       u8 tx_fifo);
 	/* setup Rx handler */
 	void (*rx_handler_setup)(struct iwl_priv *priv);
 	/* setup deferred work */
@@ -252,7 +247,6 @@ struct iwl_ops {
 
 struct iwl_mod_params {
 	int sw_crypto;		/* def: 0 = using hardware encryption */
-	int disable_hw_scan;	/* def: 0 = use h/w scan */
 	int num_of_queues;	/* def: HW dependent */
 	int disable_11n;	/* def: 0 = 11n capabilities enabled */
 	int amsdu_size_8K;	/* def: 1 = enable 8K amsdu size */
@@ -286,8 +280,6 @@ struct iwl_mod_params {
  * @chain_noise_calib_by_driver: driver has the capability to perform
  *	chain noise calibration operation
  * @shadow_reg_enable: HW shadhow register bit
- * @no_agg_framecnt_info: uCode do not provide aggregation frame count
- *	information
  */
 struct iwl_base_params {
 	int eeprom_size;
@@ -298,7 +290,6 @@ struct iwl_base_params {
 	bool set_l0s;
 	bool use_bsm;
 
-	bool use_isr_legacy;
 	const u16 max_ll_items;
 	const bool shadow_ram_support;
 	u16 led_compensation;
@@ -317,7 +308,6 @@ struct iwl_base_params {
 	const bool sensitivity_calib_by_driver;
 	const bool chain_noise_calib_by_driver;
 	const bool shadow_reg_enable;
-	const bool no_agg_framecnt_info;
 };
 /*
  * @advanced_bt_coexist: support advanced bt coexist

drivers/net/wireless/iwlwifi/iwl-csr.h

@@ -155,18 +155,10 @@
 #define CSR_DBG_LINK_PWR_MGMT_REG	(CSR_BASE+0x250)
 
 /* Bits for CSR_HW_IF_CONFIG_REG */
-#define CSR49_HW_IF_CONFIG_REG_BIT_4965_R	(0x00000010)
 #define CSR_HW_IF_CONFIG_REG_MSK_BOARD_VER	(0x00000C00)
 #define CSR_HW_IF_CONFIG_REG_BIT_MAC_SI 	(0x00000100)
 #define CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI	(0x00000200)
 
-#define CSR39_HW_IF_CONFIG_REG_BIT_3945_MB         (0x00000100)
-#define CSR39_HW_IF_CONFIG_REG_BIT_3945_MM         (0x00000200)
-#define CSR39_HW_IF_CONFIG_REG_BIT_SKU_MRC            (0x00000400)
-#define CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE         (0x00000800)
-#define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A    (0x00000000)
-#define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B    (0x00001000)
-
 #define CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A	(0x00080000)
 #define CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM	(0x00200000)
 #define CSR_HW_IF_CONFIG_REG_BIT_NIC_READY	(0x00400000) /* PCI_OWN_SEM */
@@ -186,7 +178,7 @@
 #define CSR_INT_BIT_SW_ERR       (1 << 25) /* uCode error */
 #define CSR_INT_BIT_RF_KILL      (1 << 7)  /* HW RFKILL switch GP_CNTRL[27] toggled */
 #define CSR_INT_BIT_CT_KILL      (1 << 6)  /* Critical temp (chip too hot) rfkill */
-#define CSR_INT_BIT_SW_RX        (1 << 3)  /* Rx, command responses, 3945 */
+#define CSR_INT_BIT_SW_RX        (1 << 3)  /* Rx, command responses */
 #define CSR_INT_BIT_WAKEUP       (1 << 1)  /* NIC controller waking up (pwr mgmt) */
 #define CSR_INT_BIT_ALIVE        (1 << 0)  /* uCode interrupts once it initializes */
 
@@ -202,29 +194,17 @@
 /* interrupt flags in FH (flow handler) (PCI busmaster DMA) */
 #define CSR_FH_INT_BIT_ERR       (1 << 31) /* Error */
 #define CSR_FH_INT_BIT_HI_PRIOR  (1 << 30) /* High priority Rx, bypass coalescing */
-#define CSR39_FH_INT_BIT_RX_CHNL2  (1 << 18) /* Rx channel 2 (3945 only) */
 #define CSR_FH_INT_BIT_RX_CHNL1  (1 << 17) /* Rx channel 1 */
 #define CSR_FH_INT_BIT_RX_CHNL0  (1 << 16) /* Rx channel 0 */
-#define CSR39_FH_INT_BIT_TX_CHNL6  (1 << 6)  /* Tx channel 6 (3945 only) */
 #define CSR_FH_INT_BIT_TX_CHNL1  (1 << 1)  /* Tx channel 1 */
 #define CSR_FH_INT_BIT_TX_CHNL0  (1 << 0)  /* Tx channel 0 */
 
-#define CSR39_FH_INT_RX_MASK	(CSR_FH_INT_BIT_HI_PRIOR | \
-				 CSR39_FH_INT_BIT_RX_CHNL2 | \
-				 CSR_FH_INT_BIT_RX_CHNL1 | \
-				 CSR_FH_INT_BIT_RX_CHNL0)
-
-
-#define CSR39_FH_INT_TX_MASK	(CSR39_FH_INT_BIT_TX_CHNL6 | \
-				 CSR_FH_INT_BIT_TX_CHNL1 | \
-				 CSR_FH_INT_BIT_TX_CHNL0)
-
-#define CSR49_FH_INT_RX_MASK	(CSR_FH_INT_BIT_HI_PRIOR | \
-				 CSR_FH_INT_BIT_RX_CHNL1 | \
-				 CSR_FH_INT_BIT_RX_CHNL0)
+#define CSR_FH_INT_RX_MASK	(CSR_FH_INT_BIT_HI_PRIOR | \
+				CSR_FH_INT_BIT_RX_CHNL1 | \
+				CSR_FH_INT_BIT_RX_CHNL0)
 
-#define CSR49_FH_INT_TX_MASK	(CSR_FH_INT_BIT_TX_CHNL1 | \
-				 CSR_FH_INT_BIT_TX_CHNL0)
+#define CSR_FH_INT_TX_MASK	(CSR_FH_INT_BIT_TX_CHNL1 | \
+				CSR_FH_INT_BIT_TX_CHNL0)
 
 /* GPIO */
 #define CSR_GPIO_IN_BIT_AUX_POWER                   (0x00000200)
@@ -268,7 +248,7 @@
  *         Indicates MAC (ucode processor, etc.) is powered up and can run.
  *         Internal resources are accessible.
  *         NOTE:  This does not indicate that the processor is actually running.
- *         NOTE:  This does not indicate that 4965 or 3945 has completed
+ *         NOTE:  This does not indicate that device has completed
  *                init or post-power-down restore of internal SRAM memory.
  *                Use CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP as indication that
  *                SRAM is restored and uCode is in normal operation mode.
@@ -291,8 +271,6 @@
 
 /* HW REV */
 #define CSR_HW_REV_TYPE_MSK            (0x00001F0)
-#define CSR_HW_REV_TYPE_3945           (0x00000D0)
-#define CSR_HW_REV_TYPE_4965           (0x0000000)
 #define CSR_HW_REV_TYPE_5300           (0x0000020)
 #define CSR_HW_REV_TYPE_5350           (0x0000030)
 #define CSR_HW_REV_TYPE_5100           (0x0000050)
@@ -363,7 +341,7 @@
  *     0:  MAC_SLEEP
  *         uCode sets this when preparing a power-saving power-down.
  *         uCode resets this when power-up is complete and SRAM is sane.
- *         NOTE:  3945/4965 saves internal SRAM data to host when powering down,
+ *         NOTE:  device saves internal SRAM data to host when powering down,
  *                and must restore this data after powering back up.
  *                MAC_SLEEP is the best indication that restore is complete.
  *                Later devices (5xxx/6xxx/1xxx) use non-volatile SRAM, and
@@ -394,7 +372,6 @@
 #define CSR_LED_REG_TRUN_OFF (0x38)
 
 /* ANA_PLL */
-#define CSR39_ANA_PLL_CFG_VAL        (0x01000000)
 #define CSR50_ANA_PLL_CFG_VAL        (0x00880300)
 
 /* HPET MEM debug */

drivers/net/wireless/iwlwifi/iwl-dev.h

@@ -416,6 +416,7 @@ struct iwl_ht_agg {
 #define IWL_EMPTYING_HW_QUEUE_ADDBA 2
 #define IWL_EMPTYING_HW_QUEUE_DELBA 3
 	u8 state;
+	u8 tx_fifo;
 };
 
 

drivers/net/wireless/iwlwifi/iwl-eeprom.c

@@ -198,8 +198,6 @@ static int iwlcore_get_nvm_type(struct iwl_priv *priv)
 	case CSR_HW_REV_TYPE_NONE:
 		IWL_ERR(priv, "Unknown hardware type\n");
 		return -ENOENT;
-	case CSR_HW_REV_TYPE_3945:
-	case CSR_HW_REV_TYPE_4965:
 	case CSR_HW_REV_TYPE_5300:
 	case CSR_HW_REV_TYPE_5350:
 	case CSR_HW_REV_TYPE_5100:

drivers/net/wireless/iwlwifi/iwl-sta.c

@@ -306,12 +306,6 @@ u8 iwl_prep_station(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
 	 */
 	iwl_set_ht_add_station(priv, sta_id, sta, ctx);
 
-	/* 3945 only */
-	rate = (priv->band == IEEE80211_BAND_5GHZ) ?
-		IWL_RATE_6M_PLCP : IWL_RATE_1M_PLCP;
-	/* Turn on both antennas for the station... */
-	station->sta.rate_n_flags = cpu_to_le16(rate | RATE_MCS_ANT_AB_MSK);
-
 	return sta_id;
 
 }