Merge remote-tracking branches 'spi/topic/dw', 'spi/topic/fsl-espi',...

Merge remote-tracking branches 'spi/topic/dw', 'spi/topic/fsl-espi', 'spi/topic/img-spfi' and 'spi/topic/mpc512x-psc' into spi-next

Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt

@@ -6,14 +6,14 @@ PSC in UART mode
 For PSC in UART mode the needed PSC serial devices
 are specified by fsl,mpc5121-psc-uart nodes in the
 fsl,mpc5121-immr SoC node. Additionally the PSC FIFO
-Controller node fsl,mpc5121-psc-fifo is requered there:
+Controller node fsl,mpc5121-psc-fifo is required there:
 
-fsl,mpc5121-psc-uart nodes
+fsl,mpc512x-psc-uart nodes
 --------------------------
 
 Required properties :
- - compatible : Should contain "fsl,mpc5121-psc-uart" and "fsl,mpc5121-psc"
- - cell-index : Index of the PSC in hardware
+ - compatible : Should contain "fsl,<soc>-psc-uart" and "fsl,<soc>-psc"
+   Supported <soc>s: mpc5121, mpc5125
  - reg : Offset and length of the register set for the PSC device
  - interrupts : <a b> where a is the interrupt number of the
    PSC FIFO Controller and b is a field that represents an
@@ -25,12 +25,21 @@ Recommended properties :
  - fsl,rx-fifo-size : the size of the RX fifo slice (a multiple of 4)
  - fsl,tx-fifo-size : the size of the TX fifo slice (a multiple of 4)
 
+PSC in SPI mode
+---------------
 
-fsl,mpc5121-psc-fifo node
+Similar to the UART mode a PSC can be operated in SPI mode. The compatible used
+for that is fsl,mpc5121-psc-spi. It requires a fsl,mpc5121-psc-fifo as well.
+The required and recommended properties are identical to the
+fsl,mpc5121-psc-uart nodes, just use spi instead of uart in the compatible
+string.
+
+fsl,mpc512x-psc-fifo node
 -------------------------
 
 Required properties :
- - compatible : Should be "fsl,mpc5121-psc-fifo"
+ - compatible : Should be "fsl,<soc>-psc-fifo"
+   Supported <soc>s: mpc5121, mpc5125
  - reg : Offset and length of the register set for the PSC
          FIFO Controller
  - interrupts : <a b> where a is the interrupt number of the
@@ -39,6 +48,9 @@ Required properties :
  - interrupt-parent : the phandle for the interrupt controller that
    services interrupts for this device.
 
+Recommended properties :
+ - clocks : specifies the clock needed to operate the fifo controller
+ - clock-names : name(s) for the clock(s) listed in clocks
 
 Example for a board using PSC0 and PSC1 devices in serial mode:
 

Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt

@@ -10,6 +10,8 @@ Required properties:
 Optional properties:
 - cs-gpios : Specifies the gpio pis to be used for chipselects.
 - num-cs : The number of chipselects. If omitted, this will default to 4.
+- reg-io-width : The I/O register width (in bytes) implemented by this
+  device.  Supported values are 2 or 4 (the default).
 
 Child nodes as per the generic SPI binding.
 

Documentation/devicetree/bindings/spi/spi-img-spfi.txt

@@ -21,6 +21,7 @@ Required properties:
 Optional properties:
 - img,supports-quad-mode: Should be set if the interface supports quad mode
   SPI transfers.
+- spfi-max-frequency: Maximum speed supported by the spfi block.
 
 Example:
 

arch/powerpc/include/asm/mpc52xx_psc.h

@@ -150,7 +150,10 @@
 
 /* Structure of the hardware registers */
 struct mpc52xx_psc {
-	u8		mode;		/* PSC + 0x00 */
+	union {
+		u8	mode;		/* PSC + 0x00 */
+		u8	mr2;
+	};
 	u8		reserved0[3];
 	union {				/* PSC + 0x04 */
 		u16	status;

drivers/spi/spi-dw-mmio.c

@@ -74,6 +74,9 @@ static int dw_spi_mmio_probe(struct platform_device *pdev)
 
 	dws->max_freq = clk_get_rate(dwsmmio->clk);
 
+	of_property_read_u32(pdev->dev.of_node, "reg-io-width",
+			     &dws->reg_io_width);
+
 	num_cs = 4;
 
 	if (pdev->dev.of_node)

drivers/spi/spi-dw.c

@@ -194,7 +194,7 @@ static void dw_writer(struct dw_spi *dws)
 			else
 				txw = *(u16 *)(dws->tx);
 		}
-		dw_writel(dws, DW_SPI_DR, txw);
+		dw_write_io_reg(dws, DW_SPI_DR, txw);
 		dws->tx += dws->n_bytes;
 	}
 }
@@ -205,7 +205,7 @@ static void dw_reader(struct dw_spi *dws)
 	u16 rxw;
 
 	while (max--) {
-		rxw = dw_readl(dws, DW_SPI_DR);
+		rxw = dw_read_io_reg(dws, DW_SPI_DR);
 		/* Care rx only if the transfer's original "rx" is not null */
 		if (dws->rx_end - dws->len) {
 			if (dws->n_bytes == 1)

drivers/spi/spi-dw.h

@@ -109,6 +109,7 @@ struct dw_spi {
 	u32			fifo_len;	/* depth of the FIFO buffer */
 	u32			max_freq;	/* max bus freq supported */
 
+	u32			reg_io_width;	/* DR I/O width in bytes */
 	u16			bus_num;
 	u16			num_cs;		/* supported slave numbers */
 
@@ -145,11 +146,45 @@ static inline u32 dw_readl(struct dw_spi *dws, u32 offset)
 	return __raw_readl(dws->regs + offset);
 }
 
+static inline u16 dw_readw(struct dw_spi *dws, u32 offset)
+{
+	return __raw_readw(dws->regs + offset);
+}
+
 static inline void dw_writel(struct dw_spi *dws, u32 offset, u32 val)
 {
 	__raw_writel(val, dws->regs + offset);
 }
 
+static inline void dw_writew(struct dw_spi *dws, u32 offset, u16 val)
+{
+	__raw_writew(val, dws->regs + offset);
+}
+
+static inline u32 dw_read_io_reg(struct dw_spi *dws, u32 offset)
+{
+	switch (dws->reg_io_width) {
+	case 2:
+		return dw_readw(dws, offset);
+	case 4:
+	default:
+		return dw_readl(dws, offset);
+	}
+}
+
+static inline void dw_write_io_reg(struct dw_spi *dws, u32 offset, u32 val)
+{
+	switch (dws->reg_io_width) {
+	case 2:
+		dw_writew(dws, offset, val);
+		break;
+	case 4:
+	default:
+		dw_writel(dws, offset, val);
+		break;
+	}
+}
+
 static inline void spi_enable_chip(struct dw_spi *dws, int enable)
 {
 	dw_writel(dws, DW_SPI_SSIENR, (enable ? 1 : 0));

drivers/spi/spi-fsl-espi.c

@@ -21,6 +21,7 @@
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
+#include <linux/pm_runtime.h>
 #include <sysdev/fsl_soc.h>
 
 #include "spi-fsl-lib.h"
@@ -85,6 +86,8 @@ struct fsl_espi_transfer {
 #define SPCOM_TRANLEN(x)	((x) << 0)
 #define	SPCOM_TRANLEN_MAX	0xFFFF	/* Max transaction length */
 
+#define AUTOSUSPEND_TIMEOUT 2000
+
 static void fsl_espi_change_mode(struct spi_device *spi)
 {
 	struct mpc8xxx_spi *mspi = spi_master_get_devdata(spi->master);
@@ -485,6 +488,8 @@ static int fsl_espi_setup(struct spi_device *spi)
 	mpc8xxx_spi = spi_master_get_devdata(spi->master);
 	reg_base = mpc8xxx_spi->reg_base;
 
+	pm_runtime_get_sync(mpc8xxx_spi->dev);
+
 	hw_mode = cs->hw_mode; /* Save original settings */
 	cs->hw_mode = mpc8xxx_spi_read_reg(
 			&reg_base->csmode[spi->chip_select]);
@@ -507,6 +512,10 @@ static int fsl_espi_setup(struct spi_device *spi)
 	mpc8xxx_spi_write_reg(&reg_base->mode, loop_mode);
 
 	retval = fsl_espi_setup_transfer(spi, NULL);
+
+	pm_runtime_mark_last_busy(mpc8xxx_spi->dev);
+	pm_runtime_put_autosuspend(mpc8xxx_spi->dev);
+
 	if (retval < 0) {
 		cs->hw_mode = hw_mode; /* Restore settings */
 		return retval;
@@ -604,20 +613,14 @@ static irqreturn_t fsl_espi_irq(s32 irq, void *context_data)
 	return ret;
 }
 
-static void fsl_espi_remove(struct mpc8xxx_spi *mspi)
+#ifdef CONFIG_PM
+static int fsl_espi_runtime_suspend(struct device *dev)
 {
-	iounmap(mspi->reg_base);
-}
-
-static int fsl_espi_suspend(struct spi_master *master)
-{
-	struct mpc8xxx_spi *mpc8xxx_spi;
-	struct fsl_espi_reg *reg_base;
+	struct spi_master *master = dev_get_drvdata(dev);
+	struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(master);
+	struct fsl_espi_reg *reg_base = mpc8xxx_spi->reg_base;
 	u32 regval;
 
-	mpc8xxx_spi = spi_master_get_devdata(master);
-	reg_base = mpc8xxx_spi->reg_base;
-
 	regval = mpc8xxx_spi_read_reg(&reg_base->mode);
 	regval &= ~SPMODE_ENABLE;
 	mpc8xxx_spi_write_reg(&reg_base->mode, regval);
@@ -625,21 +628,20 @@ static int fsl_espi_suspend(struct spi_master *master)
 	return 0;
 }
 
-static int fsl_espi_resume(struct spi_master *master)
+static int fsl_espi_runtime_resume(struct device *dev)
 {
-	struct mpc8xxx_spi *mpc8xxx_spi;
-	struct fsl_espi_reg *reg_base;
+	struct spi_master *master = dev_get_drvdata(dev);
+	struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(master);
+	struct fsl_espi_reg *reg_base = mpc8xxx_spi->reg_base;
 	u32 regval;
 
-	mpc8xxx_spi = spi_master_get_devdata(master);
-	reg_base = mpc8xxx_spi->reg_base;
-
 	regval = mpc8xxx_spi_read_reg(&reg_base->mode);
 	regval |= SPMODE_ENABLE;
 	mpc8xxx_spi_write_reg(&reg_base->mode, regval);
 
 	return 0;
 }
+#endif
 
 static struct spi_master * fsl_espi_probe(struct device *dev,
 		struct resource *mem, unsigned int irq)
@@ -667,25 +669,23 @@ static struct spi_master * fsl_espi_probe(struct device *dev,
 	master->setup = fsl_espi_setup;
 	master->cleanup = fsl_espi_cleanup;
 	master->transfer_one_message = fsl_espi_do_one_msg;
-	master->prepare_transfer_hardware = fsl_espi_resume;
-	master->unprepare_transfer_hardware = fsl_espi_suspend;
+	master->auto_runtime_pm = true;
 
 	mpc8xxx_spi = spi_master_get_devdata(master);
-	mpc8xxx_spi->spi_remove = fsl_espi_remove;
 
-	mpc8xxx_spi->reg_base = ioremap(mem->start, resource_size(mem));
-	if (!mpc8xxx_spi->reg_base) {
-		ret = -ENOMEM;
+	mpc8xxx_spi->reg_base = devm_ioremap_resource(dev, mem);
+	if (IS_ERR(mpc8xxx_spi->reg_base)) {
+		ret = PTR_ERR(mpc8xxx_spi->reg_base);
 		goto err_probe;
 	}
 
 	reg_base = mpc8xxx_spi->reg_base;
 
 	/* Register for SPI Interrupt */
-	ret = request_irq(mpc8xxx_spi->irq, fsl_espi_irq,
+	ret = devm_request_irq(dev, mpc8xxx_spi->irq, fsl_espi_irq,
 			  0, "fsl_espi", mpc8xxx_spi);
 	if (ret)
-		goto free_irq;
+		goto err_probe;
 
 	if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) {
 		mpc8xxx_spi->rx_shift = 16;
@@ -731,18 +731,27 @@ static struct spi_master * fsl_espi_probe(struct device *dev,
 
 	mpc8xxx_spi_write_reg(&reg_base->mode, regval);
 
-	ret = spi_register_master(master);
+	pm_runtime_set_autosuspend_delay(dev, AUTOSUSPEND_TIMEOUT);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+	pm_runtime_get_sync(dev);
+
+	ret = devm_spi_register_master(dev, master);
 	if (ret < 0)
-		goto unreg_master;
+		goto err_pm;
 
 	dev_info(dev, "at 0x%p (irq = %d)\n", reg_base, mpc8xxx_spi->irq);
 
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
 	return master;
 
-unreg_master:
-	free_irq(mpc8xxx_spi->irq, mpc8xxx_spi);
-free_irq:
-	iounmap(mpc8xxx_spi->reg_base);
+err_pm:
+	pm_runtime_put_noidle(dev);
+	pm_runtime_disable(dev);
+	pm_runtime_set_suspended(dev);
 err_probe:
 	spi_master_put(master);
 err:
@@ -809,7 +818,9 @@ static int of_fsl_espi_probe(struct platform_device *ofdev)
 
 static int of_fsl_espi_remove(struct platform_device *dev)
 {
-	return mpc8xxx_spi_remove(&dev->dev);
+	pm_runtime_disable(&dev->dev);
+
+	return 0;
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -824,7 +835,11 @@ static int of_fsl_espi_suspend(struct device *dev)
 		return ret;
 	}
 
-	return fsl_espi_suspend(master);
+	ret = pm_runtime_force_suspend(dev);
+	if (ret < 0)
+		return ret;
+
+	return 0;
 }
 
 static int of_fsl_espi_resume(struct device *dev)
@@ -834,7 +849,7 @@ static int of_fsl_espi_resume(struct device *dev)
 	struct mpc8xxx_spi *mpc8xxx_spi;
 	struct fsl_espi_reg *reg_base;
 	u32 regval;
-	int i;
+	int i, ret;
 
 	mpc8xxx_spi = spi_master_get_devdata(master);
 	reg_base = mpc8xxx_spi->reg_base;
@@ -854,11 +869,17 @@ static int of_fsl_espi_resume(struct device *dev)
 
 	mpc8xxx_spi_write_reg(&reg_base->mode, regval);
 
+	ret = pm_runtime_force_resume(dev);
+	if (ret < 0)
+		return ret;
+
 	return spi_master_resume(master);
 }
 #endif /* CONFIG_PM_SLEEP */
 
 static const struct dev_pm_ops espi_pm = {
+	SET_RUNTIME_PM_OPS(fsl_espi_runtime_suspend,
+			   fsl_espi_runtime_resume, NULL)
 	SET_SYSTEM_SLEEP_PM_OPS(of_fsl_espi_suspend, of_fsl_espi_resume)
 };
 

drivers/spi/spi-fsl-lib.c

@@ -114,25 +114,6 @@ void mpc8xxx_spi_probe(struct device *dev, struct resource *mem,
 }
 EXPORT_SYMBOL_GPL(mpc8xxx_spi_probe);
 
-int mpc8xxx_spi_remove(struct device *dev)
-{
-	struct mpc8xxx_spi *mpc8xxx_spi;
-	struct spi_master *master;
-
-	master = dev_get_drvdata(dev);
-	mpc8xxx_spi = spi_master_get_devdata(master);
-
-	spi_unregister_master(master);
-
-	free_irq(mpc8xxx_spi->irq, mpc8xxx_spi);
-
-	if (mpc8xxx_spi->spi_remove)
-		mpc8xxx_spi->spi_remove(mpc8xxx_spi);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(mpc8xxx_spi_remove);
-
 int of_mpc8xxx_spi_probe(struct platform_device *ofdev)
 {
 	struct device *dev = &ofdev->dev;

drivers/spi/spi-fsl-lib.h

@@ -54,9 +54,6 @@ struct mpc8xxx_spi {
 	void (*get_rx) (u32 rx_data, struct mpc8xxx_spi *);
 	u32(*get_tx) (struct mpc8xxx_spi *);
 
-	/* hooks for different controller driver */
-	void (*spi_remove) (struct mpc8xxx_spi *mspi);
-
 	unsigned int count;
 	unsigned int irq;
 

drivers/spi/spi-fsl-spi.c

@@ -559,12 +559,6 @@ static irqreturn_t fsl_spi_irq(s32 irq, void *context_data)
 	return ret;
 }
 
-static void fsl_spi_remove(struct mpc8xxx_spi *mspi)
-{
-	iounmap(mspi->reg_base);
-	fsl_spi_cpm_free(mspi);
-}
-
 static void fsl_spi_grlib_cs_control(struct spi_device *spi, bool on)
 {
 	struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master);
@@ -631,7 +625,6 @@ static struct spi_master * fsl_spi_probe(struct device *dev,
 	master->transfer_one_message = fsl_spi_do_one_msg;
 
 	mpc8xxx_spi = spi_master_get_devdata(master);
-	mpc8xxx_spi->spi_remove = fsl_spi_remove;
 	mpc8xxx_spi->max_bits_per_word = 32;
 	mpc8xxx_spi->type = fsl_spi_get_type(dev);
 
@@ -639,10 +632,10 @@ static struct spi_master * fsl_spi_probe(struct device *dev,
 	if (ret)
 		goto err_cpm_init;
 
-	mpc8xxx_spi->reg_base = ioremap(mem->start, resource_size(mem));
-	if (mpc8xxx_spi->reg_base == NULL) {
-		ret = -ENOMEM;
-		goto err_ioremap;
+	mpc8xxx_spi->reg_base = devm_ioremap_resource(dev, mem);
+	if (IS_ERR(mpc8xxx_spi->reg_base)) {
+		ret = PTR_ERR(mpc8xxx_spi->reg_base);
+		goto err_probe;
 	}
 
 	if (mpc8xxx_spi->type == TYPE_GRLIB)
@@ -661,11 +654,11 @@ static struct spi_master * fsl_spi_probe(struct device *dev,
 					&mpc8xxx_spi->tx_shift, 8, 1);
 
 	/* Register for SPI Interrupt */
-	ret = request_irq(mpc8xxx_spi->irq, fsl_spi_irq,
-			  0, "fsl_spi", mpc8xxx_spi);
+	ret = devm_request_irq(dev, mpc8xxx_spi->irq, fsl_spi_irq,
+			       0, "fsl_spi", mpc8xxx_spi);
 
 	if (ret != 0)
-		goto free_irq;
+		goto err_probe;
 
 	reg_base = mpc8xxx_spi->reg_base;
 
@@ -686,20 +679,16 @@ static struct spi_master * fsl_spi_probe(struct device *dev,
 
 	mpc8xxx_spi_write_reg(&reg_base->mode, regval);
 
-	ret = spi_register_master(master);
+	ret = devm_spi_register_master(dev, master);
 	if (ret < 0)
-		goto unreg_master;
+		goto err_probe;
 
 	dev_info(dev, "at 0x%p (irq = %d), %s mode\n", reg_base,
 		 mpc8xxx_spi->irq, mpc8xxx_spi_strmode(mpc8xxx_spi->flags));
 
 	return master;
 
-unreg_master:
-	free_irq(mpc8xxx_spi->irq, mpc8xxx_spi);
-free_irq:
-	iounmap(mpc8xxx_spi->reg_base);
-err_ioremap:
+err_probe:
 	fsl_spi_cpm_free(mpc8xxx_spi);
 err_cpm_init:
 	spi_master_put(master);
@@ -866,11 +855,8 @@ static int of_fsl_spi_remove(struct platform_device *ofdev)
 {
 	struct spi_master *master = platform_get_drvdata(ofdev);
 	struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(master);
-	int ret;
 
-	ret = mpc8xxx_spi_remove(&ofdev->dev);
-	if (ret)
-		return ret;
+	fsl_spi_cpm_free(mpc8xxx_spi);
 	if (mpc8xxx_spi->type == TYPE_FSL)
 		of_fsl_spi_free_chipselects(&ofdev->dev);
 	return 0;
@@ -916,7 +902,12 @@ static int plat_mpc8xxx_spi_probe(struct platform_device *pdev)
 
 static int plat_mpc8xxx_spi_remove(struct platform_device *pdev)
 {
-	return mpc8xxx_spi_remove(&pdev->dev);
+	struct spi_master *master = platform_get_drvdata(pdev);
+	struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(master);
+
+	fsl_spi_cpm_free(mpc8xxx_spi);
+
+	return 0;
 }
 
 MODULE_ALIAS("platform:mpc8xxx_spi");

drivers/spi/spi-img-spfi.c

@@ -581,6 +581,7 @@ static int img_spfi_probe(struct platform_device *pdev)
 	struct img_spfi *spfi;
 	struct resource *res;
 	int ret;
+	u32 max_speed_hz;
 
 	master = spi_alloc_master(&pdev->dev, sizeof(*spfi));
 	if (!master)
@@ -645,6 +646,19 @@ static int img_spfi_probe(struct platform_device *pdev)
 	master->max_speed_hz = clk_get_rate(spfi->spfi_clk) / 4;
 	master->min_speed_hz = clk_get_rate(spfi->spfi_clk) / 512;
 
+	/*
+	 * Maximum speed supported by spfi is limited to the lower value
+	 * between 1/4 of the SPFI clock or to "spfi-max-frequency"
+	 * defined in the device tree.
+	 * If no value is defined in the device tree assume the maximum
+	 * speed supported to be 1/4 of the SPFI clock.
+	 */
+	if (!of_property_read_u32(spfi->dev->of_node, "spfi-max-frequency",
+				  &max_speed_hz)) {
+		if (master->max_speed_hz > max_speed_hz)
+			master->max_speed_hz = max_speed_hz;
+	}
+
 	master->setup = img_spfi_setup;
 	master->cleanup = img_spfi_cleanup;
 	master->transfer_one = img_spfi_transfer_one;

drivers/spi/spi-mpc512x-psc.c

@@ -30,11 +30,37 @@
 #include <linux/gpio.h>
 #include <asm/mpc52xx_psc.h>
 
+enum {
+	TYPE_MPC5121,
+	TYPE_MPC5125,
+};
+
+/*
+ * This macro abstracts the differences in the PSC register layout between
+ * MPC5121 (which uses a struct mpc52xx_psc) and MPC5125 (using mpc5125_psc).
+ */
+#define psc_addr(mps, regname) ({					\
+	void *__ret = NULL;						\
+	switch (mps->type) {						\
+	case TYPE_MPC5121: {						\
+			struct mpc52xx_psc __iomem *psc = mps->psc;	\
+			__ret = &psc->regname;				\
+		};							\
+		break;							\
+	case TYPE_MPC5125: {						\
+			struct mpc5125_psc __iomem *psc = mps->psc;	\
+			__ret = &psc->regname;				\
+		};							\
+		break;							\
+	}								\
+	__ret; })
+
 struct mpc512x_psc_spi {
 	void (*cs_control)(struct spi_device *spi, bool on);
 
 	/* driver internal data */
-	struct mpc52xx_psc __iomem *psc;
+	int type;
+	void __iomem *psc;
 	struct mpc512x_psc_fifo __iomem *fifo;
 	unsigned int irq;
 	u8 bits_per_word;
@@ -71,13 +97,12 @@ static void mpc512x_psc_spi_activate_cs(struct spi_device *spi)
 {
 	struct mpc512x_psc_spi_cs *cs = spi->controller_state;
 	struct mpc512x_psc_spi *mps = spi_master_get_devdata(spi->master);
-	struct mpc52xx_psc __iomem *psc = mps->psc;
 	u32 sicr;
 	u32 ccr;
 	int speed;
 	u16 bclkdiv;
 
-	sicr = in_be32(&psc->sicr);
+	sicr = in_be32(psc_addr(mps, sicr));
 
 	/* Set clock phase and polarity */
 	if (spi->mode & SPI_CPHA)
@@ -94,9 +119,9 @@ static void mpc512x_psc_spi_activate_cs(struct spi_device *spi)
 		sicr |= 0x10000000;
 	else
 		sicr &= ~0x10000000;
-	out_be32(&psc->sicr, sicr);
+	out_be32(psc_addr(mps, sicr), sicr);
 
-	ccr = in_be32(&psc->ccr);
+	ccr = in_be32(psc_addr(mps, ccr));
 	ccr &= 0xFF000000;
 	speed = cs->speed_hz;
 	if (!speed)
@@ -104,7 +129,7 @@ static void mpc512x_psc_spi_activate_cs(struct spi_device *spi)
 	bclkdiv = (mps->mclk_rate / speed) - 1;
 
 	ccr |= (((bclkdiv & 0xff) << 16) | (((bclkdiv >> 8) & 0xff) << 8));
-	out_be32(&psc->ccr, ccr);
+	out_be32(psc_addr(mps, ccr), ccr);
 	mps->bits_per_word = cs->bits_per_word;
 
 	if (mps->cs_control && gpio_is_valid(spi->cs_gpio))
@@ -315,16 +340,15 @@ static int mpc512x_psc_spi_msg_xfer(struct spi_master *master,
 static int mpc512x_psc_spi_prep_xfer_hw(struct spi_master *master)
 {
 	struct mpc512x_psc_spi *mps = spi_master_get_devdata(master);
-	struct mpc52xx_psc __iomem *psc = mps->psc;
 
 	dev_dbg(&master->dev, "%s()\n", __func__);
 
 	/* Zero MR2 */
-	in_8(&psc->mode);
-	out_8(&psc->mode, 0x0);
+	in_8(psc_addr(mps, mr2));
+	out_8(psc_addr(mps, mr2), 0x0);
 
 	/* enable transmitter/receiver */
-	out_8(&psc->command, MPC52xx_PSC_TX_ENABLE | MPC52xx_PSC_RX_ENABLE);
+	out_8(psc_addr(mps, command), MPC52xx_PSC_TX_ENABLE | MPC52xx_PSC_RX_ENABLE);
 
 	return 0;
 }
@@ -332,13 +356,12 @@ static int mpc512x_psc_spi_prep_xfer_hw(struct spi_master *master)
 static int mpc512x_psc_spi_unprep_xfer_hw(struct spi_master *master)
 {
 	struct mpc512x_psc_spi *mps = spi_master_get_devdata(master);
-	struct mpc52xx_psc __iomem *psc = mps->psc;
 	struct mpc512x_psc_fifo __iomem *fifo = mps->fifo;
 
 	dev_dbg(&master->dev, "%s()\n", __func__);
 
 	/* disable transmitter/receiver and fifo interrupt */
-	out_8(&psc->command, MPC52xx_PSC_TX_DISABLE | MPC52xx_PSC_RX_DISABLE);
+	out_8(psc_addr(mps, command), MPC52xx_PSC_TX_DISABLE | MPC52xx_PSC_RX_DISABLE);
 	out_be32(&fifo->tximr, 0);
 
 	return 0;
@@ -388,7 +411,6 @@ static void mpc512x_psc_spi_cleanup(struct spi_device *spi)
 static int mpc512x_psc_spi_port_config(struct spi_master *master,
 				       struct mpc512x_psc_spi *mps)
 {
-	struct mpc52xx_psc __iomem *psc = mps->psc;
 	struct mpc512x_psc_fifo __iomem *fifo = mps->fifo;
 	u32 sicr;
 	u32 ccr;
@@ -396,12 +418,12 @@ static int mpc512x_psc_spi_port_config(struct spi_master *master,
 	u16 bclkdiv;
 
 	/* Reset the PSC into a known state */
-	out_8(&psc->command, MPC52xx_PSC_RST_RX);
-	out_8(&psc->command, MPC52xx_PSC_RST_TX);
-	out_8(&psc->command, MPC52xx_PSC_TX_DISABLE | MPC52xx_PSC_RX_DISABLE);
+	out_8(psc_addr(mps, command), MPC52xx_PSC_RST_RX);
+	out_8(psc_addr(mps, command), MPC52xx_PSC_RST_TX);
+	out_8(psc_addr(mps, command), MPC52xx_PSC_TX_DISABLE | MPC52xx_PSC_RX_DISABLE);
 
 	/* Disable psc interrupts all useful interrupts are in fifo */
-	out_be16(&psc->isr_imr.imr, 0);
+	out_be16(psc_addr(mps, isr_imr.imr), 0);
 
 	/* Disable fifo interrupts, will be enabled later */
 	out_be32(&fifo->tximr, 0);
@@ -417,18 +439,18 @@ static int mpc512x_psc_spi_port_config(struct spi_master *master,
 		0x00004000 |	/* MSTR = 1   -- SPI master */
 		0x00000800;	/* UseEOF = 1 -- SS low until EOF */
 
-	out_be32(&psc->sicr, sicr);
+	out_be32(psc_addr(mps, sicr), sicr);
 
-	ccr = in_be32(&psc->ccr);
+	ccr = in_be32(psc_addr(mps, ccr));
 	ccr &= 0xFF000000;
 	speed = 1000000;	/* default 1MHz */
 	bclkdiv = (mps->mclk_rate / speed) - 1;
 	ccr |= (((bclkdiv & 0xff) << 16) | (((bclkdiv >> 8) & 0xff) << 8));
-	out_be32(&psc->ccr, ccr);
+	out_be32(psc_addr(mps, ccr), ccr);
 
 	/* Set 2ms DTL delay */
-	out_8(&psc->ctur, 0x00);
-	out_8(&psc->ctlr, 0x82);
+	out_8(psc_addr(mps, ctur), 0x00);
+	out_8(psc_addr(mps, ctlr), 0x82);
 
 	/* we don't use the alarms */
 	out_be32(&fifo->rxalarm, 0xfff);
@@ -482,6 +504,7 @@ static int mpc512x_psc_spi_do_probe(struct device *dev, u32 regaddr,
 
 	dev_set_drvdata(dev, master);
 	mps = spi_master_get_devdata(master);
+	mps->type = (int)of_device_get_match_data(dev);
 	mps->irq = irq;
 
 	if (pdata == NULL) {
@@ -589,7 +612,8 @@ static int mpc512x_psc_spi_of_remove(struct platform_device *op)
 }
 
 static const struct of_device_id mpc512x_psc_spi_of_match[] = {
-	{ .compatible = "fsl,mpc5121-psc-spi", },
+	{ .compatible = "fsl,mpc5121-psc-spi", .data = (void *)TYPE_MPC5121 },
+	{ .compatible = "fsl,mpc5125-psc-spi", .data = (void *)TYPE_MPC5125 },
 	{},
 };