ath5k: cleanup channel to eprom_mode function

Stop returning negative values from ath5k_eeprom_mode_from_channel.
Yell loudly about that case in that function instead and return the
default/zero/mode A. This cleans up the callers, but needs to pass ah
down to ath5k_eeprom_mode_from_channel for ATH5K_WARN. For that
purpose we also need the declaration to be moved to ath5k.h.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Acked-by: NNick Kossifidis <mickflemm@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/ath5k/ath5k.h

@@ -1523,7 +1523,8 @@ int ath5k_hw_dma_stop(struct ath5k_hw *ah);
 /* EEPROM access functions */
 int ath5k_eeprom_init(struct ath5k_hw *ah);
 void ath5k_eeprom_detach(struct ath5k_hw *ah);
-
+int ath5k_eeprom_mode_from_channel(struct ath5k_hw *ah,
+		struct ieee80211_channel *channel);
 
 /* Protocol Control Unit Functions */
 /* Helpers */

drivers/net/wireless/ath/ath5k/eeprom.c

@@ -1779,7 +1779,8 @@ ath5k_eeprom_detach(struct ath5k_hw *ah)
 }
 
 int
-ath5k_eeprom_mode_from_channel(struct ieee80211_channel *channel)
+ath5k_eeprom_mode_from_channel(struct ath5k_hw *ah,
+		struct ieee80211_channel *channel)
 {
 	switch (channel->hw_value) {
 	case AR5K_MODE_11A:
@@ -1789,6 +1790,7 @@ ath5k_eeprom_mode_from_channel(struct ieee80211_channel *channel)
 	case AR5K_MODE_11B:
 		return AR5K_EEPROM_MODE_11B;
 	default:
-		return -1;
+		ATH5K_WARN(ah, "channel is not A/B/G!");
+		return AR5K_EEPROM_MODE_11A;
 	}
 }

drivers/net/wireless/ath/ath5k/eeprom.h

@@ -493,6 +493,3 @@ struct ath5k_eeprom_info {
 	/* Antenna raw switch tables */
 	u32	ee_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX];
 };
-
-int
-ath5k_eeprom_mode_from_channel(struct ieee80211_channel *channel);

drivers/net/wireless/ath/ath5k/phy.c

@@ -1612,11 +1612,7 @@ ath5k_hw_update_noise_floor(struct ath5k_hw *ah)
 
 	ah->ah_cal_mask |= AR5K_CALIBRATION_NF;
 
-	ee_mode = ath5k_eeprom_mode_from_channel(ah->ah_current_channel);
-	if (WARN_ON(ee_mode < 0)) {
-		ah->ah_cal_mask &= ~AR5K_CALIBRATION_NF;
-		return;
-	}
+	ee_mode = ath5k_eeprom_mode_from_channel(ah, ah->ah_current_channel);
 
 	/* completed NF calibration, test threshold */
 	nf = ath5k_hw_read_measured_noise_floor(ah);
@@ -2317,12 +2313,7 @@ ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode)
 
 	def_ant = ah->ah_def_ant;
 
-	ee_mode = ath5k_eeprom_mode_from_channel(channel);
-	if (ee_mode < 0) {
-		ATH5K_ERR(ah,
-			"invalid channel: %d\n", channel->center_freq);
-		return;
-	}
+	ee_mode = ath5k_eeprom_mode_from_channel(ah, channel);
 
 	switch (ant_mode) {
 	case AR5K_ANTMODE_DEFAULT:
@@ -3622,12 +3613,7 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
 		return -EINVAL;
 	}
 
-	ee_mode = ath5k_eeprom_mode_from_channel(channel);
-	if (ee_mode < 0) {
-		ATH5K_ERR(ah,
-			"invalid channel: %d\n", channel->center_freq);
-		return -EINVAL;
-	}
+	ee_mode = ath5k_eeprom_mode_from_channel(ah, channel);
 
 	/* Initialize TX power table */
 	switch (ah->ah_radio) {

drivers/net/wireless/ath/ath5k/reset.c

@@ -984,9 +984,7 @@ ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah,
 	if (ah->ah_version == AR5K_AR5210)
 		return;
 
-	ee_mode = ath5k_eeprom_mode_from_channel(channel);
-	if (WARN_ON(ee_mode < 0))
-		return;
+	ee_mode = ath5k_eeprom_mode_from_channel(ah, channel);
 
 	/* Adjust power delta for channel 14 */
 	if (channel->center_freq == 2484)