提交 1884c283 编写于 作者: F Finn Thain 提交者: Martin K. Petersen

ncr5380: Correctly clear command pointers and lists after bus reset

Commands subject to exception handling are to be returned to the scsi
mid-layer. Make sure that the various command pointers and command lists
in the low-level driver are correctly cleansed of affected commands.

This fixes some bugs that I accidentally introduced in v4.5-rc1 including
the removal of INIT_LIST_HEAD for the 'autosense' and 'disconnected'
command lists, and the possible NULL pointer dereference in
NCR5380_bus_reset() that was reported by Dan Carpenter.

hostdata->sensing may also point to an affected command so this pointer
also has to be cleared. The abort handler calls complete_cmd() to take
care of this; let's have the bus reset handler do the same.

The issue queue may also contain an affected command. If so, remove it.
This also follows the abort handler logic.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Fixes: 62717f53 ("ncr5380: Implement new eh_bus_reset_handler")
Tested-by: NMichael Schmitz <schmitzmic@gmail.com>
Cc: <stable@vger.kernel.org> # 4.5
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
上级 c6fff322
......@@ -2450,7 +2450,16 @@ static int NCR5380_bus_reset(struct scsi_cmnd *cmd)
* commands!
*/
hostdata->selecting = NULL;
if (list_del_cmd(&hostdata->unissued, cmd)) {
cmd->result = DID_RESET << 16;
cmd->scsi_done(cmd);
}
if (hostdata->selecting) {
hostdata->selecting->result = DID_RESET << 16;
complete_cmd(instance, hostdata->selecting);
hostdata->selecting = NULL;
}
list_for_each_entry(ncmd, &hostdata->disconnected, list) {
struct scsi_cmnd *cmd = NCR5380_to_scmd(ncmd);
......@@ -2458,6 +2467,7 @@ static int NCR5380_bus_reset(struct scsi_cmnd *cmd)
set_host_byte(cmd, DID_RESET);
cmd->scsi_done(cmd);
}
INIT_LIST_HEAD(&hostdata->disconnected);
list_for_each_entry(ncmd, &hostdata->autosense, list) {
struct scsi_cmnd *cmd = NCR5380_to_scmd(ncmd);
......@@ -2465,6 +2475,7 @@ static int NCR5380_bus_reset(struct scsi_cmnd *cmd)
set_host_byte(cmd, DID_RESET);
cmd->scsi_done(cmd);
}
INIT_LIST_HEAD(&hostdata->autosense);
if (hostdata->connected) {
set_host_byte(hostdata->connected, DID_RESET);
......@@ -2472,12 +2483,6 @@ static int NCR5380_bus_reset(struct scsi_cmnd *cmd)
hostdata->connected = NULL;
}
if (hostdata->sensing) {
set_host_byte(hostdata->connected, DID_RESET);
complete_cmd(instance, hostdata->sensing);
hostdata->sensing = NULL;
}
for (i = 0; i < 8; ++i)
hostdata->busy[i] = 0;
#ifdef REAL_DMA
......
......@@ -2646,7 +2646,16 @@ static int NCR5380_bus_reset(struct scsi_cmnd *cmd)
* commands!
*/
hostdata->selecting = NULL;
if (list_del_cmd(&hostdata->unissued, cmd)) {
cmd->result = DID_RESET << 16;
cmd->scsi_done(cmd);
}
if (hostdata->selecting) {
hostdata->selecting->result = DID_RESET << 16;
complete_cmd(instance, hostdata->selecting);
hostdata->selecting = NULL;
}
list_for_each_entry(ncmd, &hostdata->disconnected, list) {
struct scsi_cmnd *cmd = NCR5380_to_scmd(ncmd);
......@@ -2654,6 +2663,7 @@ static int NCR5380_bus_reset(struct scsi_cmnd *cmd)
set_host_byte(cmd, DID_RESET);
cmd->scsi_done(cmd);
}
INIT_LIST_HEAD(&hostdata->disconnected);
list_for_each_entry(ncmd, &hostdata->autosense, list) {
struct scsi_cmnd *cmd = NCR5380_to_scmd(ncmd);
......@@ -2661,6 +2671,7 @@ static int NCR5380_bus_reset(struct scsi_cmnd *cmd)
set_host_byte(cmd, DID_RESET);
cmd->scsi_done(cmd);
}
INIT_LIST_HEAD(&hostdata->autosense);
if (hostdata->connected) {
set_host_byte(hostdata->connected, DID_RESET);
......@@ -2668,12 +2679,6 @@ static int NCR5380_bus_reset(struct scsi_cmnd *cmd)
hostdata->connected = NULL;
}
if (hostdata->sensing) {
set_host_byte(hostdata->connected, DID_RESET);
complete_cmd(instance, hostdata->sensing);
hostdata->sensing = NULL;
}
#ifdef SUPPORT_TAGS
free_all_tags(hostdata);
#endif
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册