提交 18806c9e 编写于 作者: A Alexander Duyck 提交者: Peter P Waskiewicz Jr

ixgbe: Make allocating skb and placing data in it a separate function

This patch creates a function named ixgbe_fetch_rx_buffer. The sole
purpose of this function is to retrieve a single buffer off of the ring and
to place it in an skb.

The advantage to doing this is that it helps improve the readability since
I can decrease the indentation and for the code in this section.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
上级 cf3fe7ac
......@@ -1693,6 +1693,89 @@ static bool ixgbe_add_rx_frag(struct ixgbe_ring *rx_ring,
return true;
}
static struct sk_buff *ixgbe_fetch_rx_buffer(struct ixgbe_ring *rx_ring,
union ixgbe_adv_rx_desc *rx_desc)
{
struct ixgbe_rx_buffer *rx_buffer;
struct sk_buff *skb;
struct page *page;
rx_buffer = &rx_ring->rx_buffer_info[rx_ring->next_to_clean];
page = rx_buffer->page;
prefetchw(page);
skb = rx_buffer->skb;
if (likely(!skb)) {
void *page_addr = page_address(page) +
rx_buffer->page_offset;
/* prefetch first cache line of first page */
prefetch(page_addr);
#if L1_CACHE_BYTES < 128
prefetch(page_addr + L1_CACHE_BYTES);
#endif
/* allocate a skb to store the frags */
skb = netdev_alloc_skb_ip_align(rx_ring->netdev,
IXGBE_RX_HDR_SIZE);
if (unlikely(!skb)) {
rx_ring->rx_stats.alloc_rx_buff_failed++;
return NULL;
}
/*
* we will be copying header into skb->data in
* pskb_may_pull so it is in our interest to prefetch
* it now to avoid a possible cache miss
*/
prefetchw(skb->data);
/*
* Delay unmapping of the first packet. It carries the
* header information, HW may still access the header
* after the writeback. Only unmap it when EOP is
* reached
*/
if (likely(ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_EOP)))
goto dma_sync;
IXGBE_CB(skb)->dma = rx_buffer->dma;
} else {
if (ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_EOP))
ixgbe_dma_sync_frag(rx_ring, skb);
dma_sync:
/* we are reusing so sync this buffer for CPU use */
dma_sync_single_range_for_cpu(rx_ring->dev,
rx_buffer->dma,
rx_buffer->page_offset,
ixgbe_rx_bufsz(rx_ring),
DMA_FROM_DEVICE);
}
/* pull page into skb */
if (ixgbe_add_rx_frag(rx_ring, rx_buffer, rx_desc, skb)) {
/* hand second half of page back to the ring */
ixgbe_reuse_rx_page(rx_ring, rx_buffer);
} else if (IXGBE_CB(skb)->dma == rx_buffer->dma) {
/* the page has been released from the ring */
IXGBE_CB(skb)->page_released = true;
} else {
/* we are not reusing the buffer so unmap it */
dma_unmap_page(rx_ring->dev, rx_buffer->dma,
ixgbe_rx_pg_size(rx_ring),
DMA_FROM_DEVICE);
}
/* clear contents of buffer_info */
rx_buffer->skb = NULL;
rx_buffer->dma = 0;
rx_buffer->page = NULL;
return skb;
}
/**
* ixgbe_clean_rx_irq - Clean completed descriptors from Rx ring - bounce buf
* @q_vector: structure containing interrupt and ring information
......@@ -1718,11 +1801,8 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
u16 cleaned_count = ixgbe_desc_unused(rx_ring);
do {
struct ixgbe_rx_buffer *rx_buffer;
union ixgbe_adv_rx_desc *rx_desc;
struct sk_buff *skb;
struct page *page;
u16 ntc;
/* return some buffers to hardware, one at a time is too slow */
if (cleaned_count >= IXGBE_RX_BUFFER_WRITE) {
......@@ -1730,9 +1810,7 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
cleaned_count = 0;
}
ntc = rx_ring->next_to_clean;
rx_desc = IXGBE_RX_DESC(rx_ring, ntc);
rx_buffer = &rx_ring->rx_buffer_info[ntc];
rx_desc = IXGBE_RX_DESC(rx_ring, rx_ring->next_to_clean);
if (!ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_DD))
break;
......@@ -1744,78 +1822,12 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
*/
rmb();
page = rx_buffer->page;
prefetchw(page);
skb = rx_buffer->skb;
if (likely(!skb)) {
void *page_addr = page_address(page) +
rx_buffer->page_offset;
/* prefetch first cache line of first page */
prefetch(page_addr);
#if L1_CACHE_BYTES < 128
prefetch(page_addr + L1_CACHE_BYTES);
#endif
/* allocate a skb to store the frags */
skb = netdev_alloc_skb_ip_align(rx_ring->netdev,
IXGBE_RX_HDR_SIZE);
if (unlikely(!skb)) {
rx_ring->rx_stats.alloc_rx_buff_failed++;
break;
}
/*
* we will be copying header into skb->data in
* pskb_may_pull so it is in our interest to prefetch
* it now to avoid a possible cache miss
*/
prefetchw(skb->data);
/*
* Delay unmapping of the first packet. It carries the
* header information, HW may still access the header
* after the writeback. Only unmap it when EOP is
* reached
*/
if (likely(ixgbe_test_staterr(rx_desc,
IXGBE_RXD_STAT_EOP)))
goto dma_sync;
/* retrieve a buffer from the ring */
skb = ixgbe_fetch_rx_buffer(rx_ring, rx_desc);
IXGBE_CB(skb)->dma = rx_buffer->dma;
} else {
if (ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_EOP))
ixgbe_dma_sync_frag(rx_ring, skb);
dma_sync:
/* we are reusing so sync this buffer for CPU use */
dma_sync_single_range_for_cpu(rx_ring->dev,
rx_buffer->dma,
rx_buffer->page_offset,
ixgbe_rx_bufsz(rx_ring),
DMA_FROM_DEVICE);
}
/* pull page into skb */
if (ixgbe_add_rx_frag(rx_ring, rx_buffer, rx_desc, skb)) {
/* hand second half of page back to the ring */
ixgbe_reuse_rx_page(rx_ring, rx_buffer);
} else if (IXGBE_CB(skb)->dma == rx_buffer->dma) {
/* the page has been released from the ring */
IXGBE_CB(skb)->page_released = true;
} else {
/* we are not reusing the buffer so unmap it */
dma_unmap_page(rx_ring->dev, rx_buffer->dma,
ixgbe_rx_pg_size(rx_ring),
DMA_FROM_DEVICE);
}
/* clear contents of buffer_info */
rx_buffer->skb = NULL;
rx_buffer->dma = 0;
rx_buffer->page = NULL;
/* exit if we failed to retrieve a buffer */
if (!skb)
break;
ixgbe_get_rsc_cnt(rx_ring, rx_desc, skb);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册