提交 17df3f55 编写于 作者: T Takashi Iwai

ALSA: hda - Apply pin-enablement workaround to all Haswell HDMI codecs

This is a revised patch based on Mengdong Lin's fix patch, which is a
supplement to a previous patch [1611a9c9: ALSA: hda - Add fixup for
Haswell to enable all pin and convertor widgets].

Some Haswell BIOS will disable the 2nd and 3rd pin/covertor widgets
when the HD-A controller changes state from D3 to D0.  So when the
controller resumes after a system or runtime suspend, these widgets
are disabled and programming these widgets to D0 will cause H/W error
and codec will not respond.

In addition, we found out that some BIOS disables the pins at S3
although it shows up at boot.  This confuses the driver utterly, and
the hardware falls into the fatal communication error like the above.

So in this patch, we apply intel_haswell_enable_all_pins() not only as
a fixup to a certain device (with 8086:2010) but to all Haswell
machines.  The codec driver basically assumes that all pins are
exposed, so it's anyway better to see them from the beginning.  Even
if all pins and converters are shown by this call, there should be no
regression in practice: the pin default configurations are still kept,
thus the disabled pins are handled as disabled by the driver
properly.
Signed-off-by: NMengdong Lin <mengdong.lin@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
上级 2195b063
......@@ -1832,12 +1832,10 @@ static void intel_haswell_fixup_connect_list(struct hda_codec *codec,
#define INTEL_EN_ALL_PIN_CVTS 0x01 /* enable 2nd & 3rd pins and convertors */
static void intel_haswell_enable_all_pins(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
bool update_tree)
{
unsigned int vendor_param;
if (action != HDA_FIXUP_ACT_PRE_PROBE)
return;
vendor_param = snd_hda_codec_read(codec, INTEL_VENDOR_NID, 0,
INTEL_GET_VENDOR_VERB, 0);
if (vendor_param == -1 || vendor_param & INTEL_EN_ALL_PIN_CVTS)
......@@ -1849,8 +1847,8 @@ static void intel_haswell_enable_all_pins(struct hda_codec *codec,
if (vendor_param == -1)
return;
snd_hda_codec_update_widgets(codec);
return;
if (update_tree)
snd_hda_codec_update_widgets(codec);
}
static void intel_haswell_fixup_enable_dp12(struct hda_codec *codec)
......@@ -1868,30 +1866,20 @@ static void intel_haswell_fixup_enable_dp12(struct hda_codec *codec)
INTEL_SET_VENDOR_VERB, vendor_param);
}
/* Haswell needs to re-issue the vendor-specific verbs before turning to D0.
* Otherwise you may get severe h/w communication errors.
*/
static void haswell_set_power_state(struct hda_codec *codec, hda_nid_t fg,
unsigned int power_state)
{
if (power_state == AC_PWRST_D0) {
intel_haswell_enable_all_pins(codec, false);
intel_haswell_fixup_enable_dp12(codec);
}
/* available models for fixup */
enum {
INTEL_HASWELL,
};
static const struct hda_model_fixup hdmi_models[] = {
{.id = INTEL_HASWELL, .name = "Haswell"},
{}
};
static const struct snd_pci_quirk hdmi_fixup_tbl[] = {
SND_PCI_QUIRK(0x8086, 0x2010, "Haswell", INTEL_HASWELL),
{} /* terminator */
};
static const struct hda_fixup hdmi_fixups[] = {
[INTEL_HASWELL] = {
.type = HDA_FIXUP_FUNC,
.v.func = intel_haswell_enable_all_pins,
},
};
snd_hda_codec_read(codec, fg, 0, AC_VERB_SET_POWER_STATE, power_state);
snd_hda_codec_set_power_to_all(codec, fg, power_state);
}
static int patch_generic_hdmi(struct hda_codec *codec)
{
......@@ -1904,11 +1892,10 @@ static int patch_generic_hdmi(struct hda_codec *codec)
codec->spec = spec;
hdmi_array_init(spec, 4);
snd_hda_pick_fixup(codec, hdmi_models, hdmi_fixup_tbl, hdmi_fixups);
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PRE_PROBE);
if (codec->vendor_id == 0x80862807)
if (codec->vendor_id == 0x80862807) {
intel_haswell_enable_all_pins(codec, true);
intel_haswell_fixup_enable_dp12(codec);
}
if (hdmi_parse_codec(codec) < 0) {
codec->spec = NULL;
......@@ -1916,6 +1903,9 @@ static int patch_generic_hdmi(struct hda_codec *codec)
return -EINVAL;
}
codec->patch_ops = generic_hdmi_patch_ops;
if (codec->vendor_id == 0x80862807)
codec->patch_ops.set_power_state = haswell_set_power_state;
generic_hdmi_init_per_pins(codec);
init_channel_allocations();
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册