提交 17d6aeaf 编写于 作者: M Matthew Slattery 提交者: David S. Miller

sfc: QT2025C: Work around PHY bug

If we see the PHY remaining stuck in a link-down state due to PCS being
down while PMA/PMD is up, we briefly switch to PMA/PMD loopback and back,
which usually unsticks it.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 a7ebd27a
master alk-4.19.24 alk-4.19.30 alk-4.19.34 alk-4.19.36 alk-4.19.43 alk-4.19.48 alk-4.19.57 ck-4.19.67 ck-4.19.81 ck-4.19.91 github/fork/deepanshu1422/fix-typo-in-comment github/fork/haosdent/fix-typo linux-next v4.19.91 v4.19.90 v4.19.89 v4.19.88 v4.19.87 v4.19.86 v4.19.85 v4.19.84 v4.19.83 v4.19.82 v4.19.81 v4.19.80 v4.19.79 v4.19.78 v4.19.77 v4.19.76 v4.19.75 v4.19.74 v4.19.73 v4.19.72 v4.19.71 v4.19.70 v4.19.69 v4.19.68 v4.19.67 v4.19.66 v4.19.65 v4.19.64 v4.19.63 v4.19.62 v4.19.61 v4.19.60 v4.19.59 v4.19.58 v4.19.57 v4.19.56 v4.19.55 v4.19.54 v4.19.53 v4.19.52 v4.19.51 v4.19.50 v4.19.49 v4.19.48 v4.19.47 v4.19.46 v4.19.45 v4.19.44 v4.19.43 v4.19.42 v4.19.41 v4.19.40 v4.19.39 v4.19.38 v4.19.37 v4.19.36 v4.19.35 v4.19.34 v4.19.33 v4.19.32 v4.19.31 v4.19.30 v4.19.29 v4.19.28 v4.19.27 v4.19.26 v4.19.25 v4.19.24 v4.19.23 v4.19.22 v4.19.21 v4.19.20 v4.19.19 v4.19.18 v4.19.17 v4.19.16 v4.19.15 v4.19.14 v4.19.13 v4.19.12 v4.19.11 v4.19.10 v4.19.9 v4.19.8 v4.19.7 v4.19.6 v4.19.5 v4.19.4 v4.19.3 v4.19.2 v4.19.1 v4.19 v4.19-rc8 v4.19-rc7 v4.19-rc6 v4.19-rc5 v4.19-rc4 v4.19-rc3 v4.19-rc2 v4.19-rc1 ck-release-21 ck-release-20 ck-release-19.2 ck-release-19.1 ck-release-19 ck-release-18 ck-release-17.2 ck-release-17.1 ck-release-17 ck-release-16 ck-release-15.1 ck-release-15 ck-release-14 ck-release-13.2 ck-release-13 ck-release-12 ck-release-11 ck-release-10 ck-release-9 ck-release-7 alk-release-15 alk-release-14 alk-release-13.2 alk-release-13 alk-release-12 alk-release-11 alk-release-10 alk-release-9 alk-release-7
无相关合并请求
......@@ -52,11 +52,15 @@ void falcon_qt202x_set_led(struct efx_nic *p, int led, int mode)
struct qt202x_phy_data {
enum efx_phy_mode phy_mode;
bool bug17190_in_bad_state;
unsigned long bug17190_timer;
};
#define QT2022C2_MAX_RESET_TIME 500
#define QT2022C2_RESET_WAIT 10
#define BUG17190_INTERVAL (2 * HZ)
static int qt2025c_wait_reset(struct efx_nic *efx)
{
unsigned long timeout = jiffies + 10 * HZ;
......@@ -96,6 +100,39 @@ static int qt2025c_wait_reset(struct efx_nic *efx)
return 0;
}
static void qt2025c_bug17190_workaround(struct efx_nic *efx)
{
struct qt202x_phy_data *phy_data = efx->phy_data;
/* The PHY can get stuck in a state where it reports PHY_XS and PMA/PMD
* layers up, but PCS down (no block_lock). If we notice this state
* persisting for a couple of seconds, we switch PMA/PMD loopback
* briefly on and then off again, which is normally sufficient to
* recover it.
*/
if (efx->link_state.up ||
!efx_mdio_links_ok(efx, MDIO_DEVS_PMAPMD | MDIO_DEVS_PHYXS)) {
phy_data->bug17190_in_bad_state = false;
return;
}
if (!phy_data->bug17190_in_bad_state) {
phy_data->bug17190_in_bad_state = true;
phy_data->bug17190_timer = jiffies + BUG17190_INTERVAL;
return;
}
if (time_after_eq(jiffies, phy_data->bug17190_timer)) {
EFX_LOG(efx, "bashing QT2025C PMA/PMD\n");
efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_CTRL1,
MDIO_PMA_CTRL1_LOOPBACK, true);
msleep(100);
efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_CTRL1,
MDIO_PMA_CTRL1_LOOPBACK, false);
phy_data->bug17190_timer = jiffies + BUG17190_INTERVAL;
}
}
static int qt202x_reset_phy(struct efx_nic *efx)
{
int rc;
......@@ -144,6 +181,8 @@ static int qt202x_phy_probe(struct efx_nic *efx)
return -ENOMEM;
efx->phy_data = phy_data;
phy_data->phy_mode = efx->phy_mode;
phy_data->bug17190_in_bad_state = false;
phy_data->bug17190_timer = 0;
efx->mdio.mmds = QT202X_REQUIRED_DEVS;
efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
......@@ -184,6 +223,9 @@ static bool qt202x_phy_poll(struct efx_nic *efx)
efx->link_state.fd = true;
efx->link_state.fc = efx->wanted_fc;
if (efx->phy_type == PHY_TYPE_QT2025C)
qt2025c_bug17190_workaround(efx);
return efx->link_state.up != was_up;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册
反馈
建议
客服 返回
顶部