提交 170b778f 编写于 作者: C Cyril Roelandt 提交者: Felipe Balbi

usb: amd5536udc: Fix brace coding style issues.

Remove a bunch of unneeded braces.
Signed-off-by: NCyril Roelandt <tipecaml@gmail.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
上级 c5cc5ed8
......@@ -204,9 +204,8 @@ static void print_regs(struct udc *dev)
DBG(dev, "DMA mode = BF (buffer fill mode)\n");
dev_info(&dev->pdev->dev, "DMA mode (%s)\n", "BF");
}
if (!use_dma) {
if (!use_dma)
dev_info(&dev->pdev->dev, "FIFO mode\n");
}
DBG(dev, "-------------------------------------------------------\n");
}
......@@ -570,9 +569,8 @@ udc_free_request(struct usb_ep *usbep, struct usb_request *usbreq)
VDBG(ep->dev, "req->td_data=%p\n", req->td_data);
/* free dma chain if created */
if (req->chain_len > 1) {
if (req->chain_len > 1)
udc_free_dma_chain(ep->dev, req);
}
pci_pool_free(ep->dev->data_requests, req->td_data,
req->td_phys);
......@@ -640,9 +638,8 @@ udc_txfifo_write(struct udc_ep *ep, struct usb_request *req)
bytes = remaining;
/* dwords first */
for (i = 0; i < bytes / UDC_DWORD_BYTES; i++) {
for (i = 0; i < bytes / UDC_DWORD_BYTES; i++)
writel(*(buf + i), ep->txfifo);
}
/* remaining bytes must be written by byte access */
for (j = 0; j < bytes % UDC_DWORD_BYTES; j++) {
......@@ -661,9 +658,8 @@ static int udc_rxfifo_read_dwords(struct udc *dev, u32 *buf, int dwords)
VDBG(dev, "udc_read_dwords(): %d dwords\n", dwords);
for (i = 0; i < dwords; i++) {
for (i = 0; i < dwords; i++)
*(buf + i) = readl(dev->rxfifo);
}
return 0;
}
......@@ -676,9 +672,8 @@ static int udc_rxfifo_read_bytes(struct udc *dev, u8 *buf, int bytes)
VDBG(dev, "udc_read_bytes(): %d bytes\n", bytes);
/* dwords first */
for (i = 0; i < bytes / UDC_DWORD_BYTES; i++) {
for (i = 0; i < bytes / UDC_DWORD_BYTES; i++)
*((u32 *)(buf + (i<<2))) = readl(dev->rxfifo);
}
/* remaining bytes must be read by byte access */
if (bytes % UDC_DWORD_BYTES) {
......@@ -898,9 +893,8 @@ static struct udc_data_dma *udc_get_last_dma_desc(struct udc_request *req)
struct udc_data_dma *td;
td = req->td_data;
while (td && !(td->status & AMD_BIT(UDC_DMA_IN_STS_L))) {
while (td && !(td->status & AMD_BIT(UDC_DMA_IN_STS_L)))
td = phys_to_virt(td->next);
}
return td;
......@@ -950,21 +944,18 @@ static int udc_create_dma_chain(
dma_addr = DMA_DONT_USE;
/* unset L bit in first desc for OUT */
if (!ep->in) {
if (!ep->in)
req->td_data->status &= AMD_CLEAR_BIT(UDC_DMA_IN_STS_L);
}
/* alloc only new desc's if not already available */
len = req->req.length / ep->ep.maxpacket;
if (req->req.length % ep->ep.maxpacket) {
if (req->req.length % ep->ep.maxpacket)
len++;
}
if (len > req->chain_len) {
/* shorter chain already allocated before */
if (req->chain_len > 1) {
if (req->chain_len > 1)
udc_free_dma_chain(ep->dev, req);
}
req->chain_len = len;
create_new_chain = 1;
}
......@@ -1007,11 +998,12 @@ static int udc_create_dma_chain(
/* link td and assign tx bytes */
if (i == buf_len) {
if (create_new_chain) {
if (create_new_chain)
req->td_data->next = dma_addr;
} else {
/* req->td_data->next = virt_to_phys(td); */
}
/*
else
req->td_data->next = virt_to_phys(td);
*/
/* write tx bytes */
if (ep->in) {
/* first desc */
......@@ -1025,11 +1017,12 @@ static int udc_create_dma_chain(
UDC_DMA_IN_STS_TXBYTES);
}
} else {
if (create_new_chain) {
if (create_new_chain)
last->next = dma_addr;
} else {
/* last->next = virt_to_phys(td); */
}
/*
else
last->next = virt_to_phys(td);
*/
if (ep->in) {
/* write tx bytes */
td->status = AMD_ADDBITS(td->status,
......@@ -1480,11 +1473,10 @@ static int startup_registers(struct udc *dev)
/* program speed */
tmp = readl(&dev->regs->cfg);
if (use_fullspeed) {
if (use_fullspeed)
tmp = AMD_ADDBITS(tmp, UDC_DEVCFG_SPD_FS, UDC_DEVCFG_SPD);
} else {
else
tmp = AMD_ADDBITS(tmp, UDC_DEVCFG_SPD_HS, UDC_DEVCFG_SPD);
}
writel(tmp, &dev->regs->cfg);
return 0;
......@@ -1505,9 +1497,8 @@ static void udc_basic_init(struct udc *dev)
mod_timer(&udc_timer, jiffies - 1);
}
/* stop poll stall timer */
if (timer_pending(&udc_pollstall_timer)) {
if (timer_pending(&udc_pollstall_timer))
mod_timer(&udc_pollstall_timer, jiffies - 1);
}
/* disable DMA */
tmp = readl(&dev->regs->ctl);
tmp &= AMD_UNMASK_BIT(UDC_DEVCTL_RDE);
......@@ -1541,11 +1532,10 @@ static void udc_setup_endpoints(struct udc *dev)
/* read enum speed */
tmp = readl(&dev->regs->sts);
tmp = AMD_GETBITS(tmp, UDC_DEVSTS_ENUM_SPEED);
if (tmp == UDC_DEVSTS_ENUM_SPEED_HIGH) {
if (tmp == UDC_DEVSTS_ENUM_SPEED_HIGH)
dev->gadget.speed = USB_SPEED_HIGH;
} else if (tmp == UDC_DEVSTS_ENUM_SPEED_FULL) {
else if (tmp == UDC_DEVSTS_ENUM_SPEED_FULL)
dev->gadget.speed = USB_SPEED_FULL;
}
/* set basic ep parameters */
for (tmp = 0; tmp < UDC_EP_NUM; tmp++) {
......@@ -1571,9 +1561,8 @@ static void udc_setup_endpoints(struct udc *dev)
* disabling ep interrupts when ENUM interrupt occurs but ep is
* not enabled by gadget driver
*/
if (!ep->desc) {
if (!ep->desc)
ep_init(dev->regs, ep);
}
if (use_dma) {
/*
......@@ -1671,9 +1660,8 @@ static void udc_tasklet_disconnect(unsigned long par)
spin_lock(&dev->lock);
/* empty queues */
for (tmp = 0; tmp < UDC_EP_NUM; tmp++) {
for (tmp = 0; tmp < UDC_EP_NUM; tmp++)
empty_req_queue(&dev->ep[tmp]);
}
}
......@@ -1747,9 +1735,8 @@ static void udc_timer_function(unsigned long v)
* open the fifo
*/
udc_timer.expires = jiffies + HZ/UDC_RDE_TIMER_DIV;
if (!stop_timer) {
if (!stop_timer)
add_timer(&udc_timer);
}
} else {
/*
* fifo contains data now, setup timer for opening
......@@ -1761,9 +1748,8 @@ static void udc_timer_function(unsigned long v)
set_rde++;
/* debug: lhadmot_timer_start = 221070 */
udc_timer.expires = jiffies + HZ*UDC_RDE_TIMER_SECONDS;
if (!stop_timer) {
if (!stop_timer)
add_timer(&udc_timer);
}
}
} else
......@@ -1908,19 +1894,17 @@ static void activate_control_endpoints(struct udc *dev)
mod_timer(&udc_timer, jiffies - 1);
}
/* stop pollstall timer */
if (timer_pending(&udc_pollstall_timer)) {
if (timer_pending(&udc_pollstall_timer))
mod_timer(&udc_pollstall_timer, jiffies - 1);
}
/* enable DMA */
tmp = readl(&dev->regs->ctl);
tmp |= AMD_BIT(UDC_DEVCTL_MODE)
| AMD_BIT(UDC_DEVCTL_RDE)
| AMD_BIT(UDC_DEVCTL_TDE);
if (use_dma_bufferfill_mode) {
if (use_dma_bufferfill_mode)
tmp |= AMD_BIT(UDC_DEVCTL_BF);
} else if (use_dma_ppb_du) {
else if (use_dma_ppb_du)
tmp |= AMD_BIT(UDC_DEVCTL_DU);
}
writel(tmp, &dev->regs->ctl);
}
......@@ -2105,9 +2089,8 @@ static void udc_ep0_set_rde(struct udc *dev)
udc_timer.expires =
jiffies + HZ/UDC_RDE_TIMER_DIV;
set_rde = 1;
if (!stop_timer) {
if (!stop_timer)
add_timer(&udc_timer);
}
}
}
}
......@@ -2295,9 +2278,8 @@ static irqreturn_t udc_data_out_isr(struct udc *dev, int ep_ix)
jiffies
+ HZ*UDC_RDE_TIMER_SECONDS;
set_rde = 1;
if (!stop_timer) {
if (!stop_timer)
add_timer(&udc_timer);
}
}
if (ep->num != UDC_EP0OUT_IX)
dev->data_ep_queued = 0;
......@@ -2319,9 +2301,8 @@ static irqreturn_t udc_data_out_isr(struct udc *dev, int ep_ix)
/* check pending CNAKS */
if (cnak_pending) {
/* CNAk processing when rxfifo empty only */
if (readl(&dev->regs->sts) & AMD_BIT(UDC_DEVSTS_RXFIFO_EMPTY)) {
if (readl(&dev->regs->sts) & AMD_BIT(UDC_DEVSTS_RXFIFO_EMPTY))
udc_process_cnak_queue(dev);
}
}
/* clear OUT bits in ep status */
......@@ -2582,9 +2563,8 @@ __acquires(dev->lock)
if (!timer_pending(&udc_timer)) {
udc_timer.expires = jiffies +
HZ/UDC_RDE_TIMER_DIV;
if (!stop_timer) {
if (!stop_timer)
add_timer(&udc_timer);
}
}
}
......@@ -2698,9 +2678,8 @@ __acquires(dev->lock)
/* check pending CNAKS */
if (cnak_pending) {
/* CNAk processing when rxfifo empty only */
if (readl(&dev->regs->sts) & AMD_BIT(UDC_DEVSTS_RXFIFO_EMPTY)) {
if (readl(&dev->regs->sts) & AMD_BIT(UDC_DEVSTS_RXFIFO_EMPTY))
udc_process_cnak_queue(dev);
}
}
finished:
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册