提交 16c40361 编写于 作者: I Icenowy Zheng 提交者: Kishon Vijay Abraham I

phy: sun4i-usb: add support for V3s USB PHY

Allwinner V3s come with a USB PHY controller slightly different to other
SoCs, with only one PHY.

Add support for it.
Signed-off-by: NIcenowy Zheng <icenowy@aosc.xyz>
Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
上级 3445be59
......@@ -10,6 +10,7 @@ Required properties:
* allwinner,sun8i-a23-usb-phy
* allwinner,sun8i-a33-usb-phy
* allwinner,sun8i-h3-usb-phy
* allwinner,sun8i-v3s-usb-phy
* allwinner,sun50i-a64-usb-phy
- reg : a list of offset + length pairs
- reg-names :
......
......@@ -99,6 +99,7 @@ enum sun4i_usb_phy_type {
sun6i_a31_phy,
sun8i_a33_phy,
sun8i_h3_phy,
sun8i_v3s_phy,
sun50i_a64_phy,
};
......@@ -188,7 +189,8 @@ static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data,
spin_lock_irqsave(&phy_data->reg_lock, flags);
if (phy_data->cfg->type == sun8i_a33_phy ||
phy_data->cfg->type == sun50i_a64_phy) {
phy_data->cfg->type == sun50i_a64_phy ||
phy_data->cfg->type == sun8i_v3s_phy) {
/* A33 or A64 needs us to set phyctl to 0 explicitly */
writel(0, phyctl);
}
......@@ -825,6 +827,15 @@ static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = {
.enable_pmu_unk1 = true,
};
static const struct sun4i_usb_phy_cfg sun8i_v3s_cfg = {
.num_phys = 1,
.type = sun8i_v3s_phy,
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
.enable_pmu_unk1 = true,
};
static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = {
.num_phys = 2,
.type = sun50i_a64_phy,
......@@ -842,6 +853,7 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = {
{ .compatible = "allwinner,sun8i-a23-usb-phy", .data = &sun8i_a23_cfg },
{ .compatible = "allwinner,sun8i-a33-usb-phy", .data = &sun8i_a33_cfg },
{ .compatible = "allwinner,sun8i-h3-usb-phy", .data = &sun8i_h3_cfg },
{ .compatible = "allwinner,sun8i-v3s-usb-phy", .data = &sun8i_v3s_cfg },
{ .compatible = "allwinner,sun50i-a64-usb-phy",
.data = &sun50i_a64_cfg},
{ },
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册