Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
提交 1637d480 编写于 作者: L Linus Walleij
浏览文件
操作

pinctrl: nomadik: force-convert to generic config bindings 

This converts the Nomadik pin controller and all associated device
trees to use the standard, generic config bindings for pin controllers.
There are no such device trees deployed in the wild so this is
safe to do to set a good example.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
上级 51d39936
隐藏空白更改
内联 并排
Showing with 148 addition and 148 deletion
arch/arm/boot/dts/ste-ccu8540-pinctrl.dtsi
浏览文件 @ 1637d480
......@@ -23,24 +23,24 @@
uart0_default_mode: uart0_default {
default_cfg1 {
ste,pins = "GPIO0", "GPIO2";
pins = "GPIO0", "GPIO2";
ste,config = <&in_pu>;
};
default_cfg2 {
ste,pins = "GPIO1", "GPIO3";
pins = "GPIO1", "GPIO3";
ste,config = <&out_hi>;
};
};
uart0_sleep_mode: uart0_sleep {
sleep_cfg1 {
ste,pins = "GPIO0", "GPIO2";
pins = "GPIO0", "GPIO2";
ste,config = <&slpm_in_pu>;
};
sleep_cfg2 {
ste,pins = "GPIO1", "GPIO3";
pins = "GPIO1", "GPIO3";
ste,config = <&slpm_out_hi>;
};
};
......@@ -54,24 +54,24 @@
};
default_cfg1 {
ste,pins = "GPIO120";
pins = "GPIO120";
ste,config = <&in_pu>;
};
default_cfg2 {
ste,pins = "GPIO121";
pins = "GPIO121";
ste,config = <&out_hi>;
};
};
uart2_sleep_mode: uart2_sleep {
sleep_cfg1 {
ste,pins = "GPIO120";
pins = "GPIO120";
ste,config = <&slpm_in_pu>;
};
sleep_cfg2 {
ste,pins = "GPIO121";
pins = "GPIO121";
ste,config = <&slpm_out_hi>;
};
};
......@@ -87,14 +87,14 @@
i2c0_default_mode: i2c_default {
default_cfg1 {
ste,pins = "GPIO147", "GPIO148";
pins = "GPIO147", "GPIO148";
ste,config = <&in_pu>;
};
};
i2c0_sleep_mode: i2c_sleep {
sleep_cfg1 {
ste,pins = "GPIO147", "GPIO148";
pins = "GPIO147", "GPIO148";
ste,config = <&slpm_in_pu>;
};
};
......@@ -110,14 +110,14 @@
i2c1_default_mode: i2c_default {
default_cfg1 {
ste,pins = "GPIO16", "GPIO17";
pins = "GPIO16", "GPIO17";
ste,config = <&in_pu>;
};
};
i2c1_sleep_mode: i2c_sleep {
sleep_cfg1 {
ste,pins = "GPIO16", "GPIO17";
pins = "GPIO16", "GPIO17";
ste,config = <&slpm_in_pu>;
};
};
......@@ -133,14 +133,14 @@
i2c2_default_mode: i2c_default {
default_cfg1 {
ste,pins = "GPIO10", "GPIO11";
pins = "GPIO10", "GPIO11";
ste,config = <&in_pu>;
};
};
i2c2_sleep_mode: i2c_sleep {
sleep_cfg1 {
ste,pins = "GPIO11", "GPIO11";
pins = "GPIO11", "GPIO11";
ste,config = <&slpm_in_pu>;
};
};
......@@ -156,14 +156,14 @@
i2c4_default_mode: i2c_default {
default_cfg1 {
ste,pins = "GPIO122", "GPIO123";
pins = "GPIO122", "GPIO123";
ste,config = <&in_pu>;
};
};
i2c4_sleep_mode: i2c_sleep {
sleep_cfg1 {
ste,pins = "GPIO122", "GPIO123";
pins = "GPIO122", "GPIO123";
ste,config = <&slpm_in_pu>;
};
};
......@@ -179,14 +179,14 @@
i2c5_default_mode: i2c_default {
default_cfg1 {
ste,pins = "GPIO118", "GPIO119";
pins = "GPIO118", "GPIO119";
ste,config = <&in_pu>;
};
};
i2c5_sleep_mode: i2c_sleep {
sleep_cfg1 {
ste,pins = "GPIO118", "GPIO119";
pins = "GPIO118", "GPIO119";
ste,config = <&slpm_in_pu>;
};
};
......
arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
浏览文件 @ 1637d480
......@@ -22,29 +22,29 @@
groups = "u0_a_1";
};
default_cfg1 {
ste,pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
ste,config = <&in_pu>;
};
default_cfg2 {
ste,pins = "GPIO1_AJ3", "GPIO3_AH3"; /* RTS+TXD */
pins = "GPIO1_AJ3", "GPIO3_AH3"; /* RTS+TXD */
ste,config = <&out_hi>;
};
};
uart0_sleep_mode: uart0_sleep {
sleep_cfg1 {
ste,pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
ste,config = <&slpm_in_wkup_pdis>;
};
sleep_cfg2 {
ste,pins = "GPIO1_AJ3"; /* RTS */
pins = "GPIO1_AJ3"; /* RTS */
ste,config = <&slpm_out_hi_wkup_pdis>;
};
sleep_cfg3 {
ste,pins = "GPIO3_AH3"; /* TXD */
pins = "GPIO3_AH3"; /* TXD */
ste,config = <&slpm_out_wkup_pdis>;
};
};
......@@ -57,24 +57,24 @@
groups = "u1rxtx_a_1";
};
default_cfg1 {
ste,pins = "GPIO4_AH6"; /* RXD */
pins = "GPIO4_AH6"; /* RXD */
ste,config = <&in_pu>;
};
default_cfg2 {
ste,pins = "GPIO5_AG6"; /* TXD */
pins = "GPIO5_AG6"; /* TXD */
ste,config = <&out_hi>;
};
};
uart1_sleep_mode: uart1_sleep {
sleep_cfg1 {
ste,pins = "GPIO4_AH6"; /* RXD */
pins = "GPIO4_AH6"; /* RXD */
ste,config = <&slpm_in_wkup_pdis>;
};
sleep_cfg2 {
ste,pins = "GPIO5_AG6"; /* TXD */
pins = "GPIO5_AG6"; /* TXD */
ste,config = <&slpm_out_wkup_pdis>;
};
};
......@@ -87,24 +87,24 @@
groups = "u2rxtx_c_1";
};
default_cfg1 {
ste,pins = "GPIO29_W2"; /* RXD */
pins = "GPIO29_W2"; /* RXD */
ste,config = <&in_pu>;
};
default_cfg2 {
ste,pins = "GPIO30_W3"; /* TXD */
pins = "GPIO30_W3"; /* TXD */
ste,config = <&out_hi>;
};
};
uart2_sleep_mode: uart2_sleep {
sleep_cfg1 {
ste,pins = "GPIO29_W2"; /* RXD */
pins = "GPIO29_W2"; /* RXD */
ste,config = <&in_wkup_pdis>;
};
sleep_cfg2 {
ste,pins = "GPIO30_W3"; /* TXD */
pins = "GPIO30_W3"; /* TXD */
ste,config = <&out_wkup_pdis>;
};
};
......@@ -118,14 +118,14 @@
groups = "i2c0_a_1";
};
default_cfg1 {
ste,pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
ste,config = <&in_pu>;
};
};
i2c0_sleep_mode: i2c_sleep {
sleep_cfg1 {
ste,pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
ste,config = <&slpm_in_wkup_pdis>;
};
};
......@@ -138,14 +138,14 @@
groups = "i2c1_b_2";
};
default_cfg1 {
ste,pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
ste,config = <&in_pu>;
};
};
i2c1_sleep_mode: i2c_sleep {
sleep_cfg1 {
ste,pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
ste,config = <&slpm_in_wkup_pdis>;
};
};
......@@ -158,14 +158,14 @@
groups = "i2c2_b_2";
};
default_cfg1 {
ste,pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
ste,config = <&in_pu>;
};
};
i2c2_sleep_mode: i2c_sleep {
sleep_cfg1 {
ste,pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
ste,config = <&slpm_in_wkup_pdis>;
};
};
......@@ -178,14 +178,14 @@
groups = "i2c3_c_2";
};
default_cfg1 {
ste,pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
ste,config = <&in_pu>;
};
};
i2c3_sleep_mode: i2c_sleep {
sleep_cfg1 {
ste,pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
ste,config = <&slpm_in_wkup_pdis>;
};
};
......@@ -202,14 +202,14 @@
groups = "i2c4_b_1";
};
default_cfg1 {
ste,pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
ste,config = <&in_pu>;
};
};
i2c4_sleep_mode: i2c_sleep {
sleep_cfg1 {
ste,pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
ste,config = <&slpm_in_wkup_pdis>;
};
};
......@@ -223,15 +223,15 @@
groups = "spi2_oc1_2";
};
default_cfg1 {
ste,pins = "GPIO216_AG12"; /* FRM */
pins = "GPIO216_AG12"; /* FRM */
ste,config = <&gpio_out_hi>;
};
default_cfg2 {
ste,pins = "GPIO218_AH11"; /* RXD */
pins = "GPIO218_AH11"; /* RXD */
ste,config = <&in_pd>;
};
default_cfg3 {
ste,pins =
pins =
"GPIO215_AH13", /* TXD */
"GPIO217_AH12"; /* CLK */
ste,config = <&out_lo>;
......@@ -245,32 +245,32 @@
* as we do not state any muxing.
*/
idle_cfg1 {
ste,pins = "GPIO218_AH11"; /* RXD */
pins = "GPIO218_AH11"; /* RXD */
ste,config = <&slpm_in_pdis>;
};
idle_cfg2 {
ste,pins = "GPIO215_AH13"; /* TXD */
pins = "GPIO215_AH13"; /* TXD */
ste,config = <&slpm_out_lo_pdis>;
};
idle_cfg3 {
ste,pins = "GPIO217_AH12"; /* CLK */
pins = "GPIO217_AH12"; /* CLK */
ste,config = <&slpm_pdis>;
};
};
spi2_sleep_mode: spi_sleep {
sleep_cfg1 {
ste,pins =
pins =
"GPIO216_AG12", /* FRM */
"GPIO218_AH11"; /* RXD */
ste,config = <&slpm_in_wkup_pdis>;
};
sleep_cfg2 {
ste,pins = "GPIO215_AH13"; /* TXD */
pins = "GPIO215_AH13"; /* TXD */
ste,config = <&slpm_out_lo_wkup_pdis>;
};
sleep_cfg3 {
ste,pins = "GPIO217_AH12"; /* CLK */
pins = "GPIO217_AH12"; /* CLK */
ste,config = <&slpm_wkup_pdis>;
};
};
......@@ -285,22 +285,22 @@
groups = "mc0_a_1";
};
default_cfg1 {
ste,pins =
pins =
"GPIO18_AC2", /* CMDDIR */
"GPIO19_AC1", /* DAT0DIR */
"GPIO20_AB4"; /* DAT2DIR */
ste,config = <&out_hi>;
};
default_cfg2 {
ste,pins = "GPIO22_AA3"; /* FBCLK */
pins = "GPIO22_AA3"; /* FBCLK */
ste,config = <&in_nopull>;
};
default_cfg3 {
ste,pins = "GPIO23_AA4"; /* CLK */
pins = "GPIO23_AA4"; /* CLK */
ste,config = <&out_lo>;
};
default_cfg4 {
ste,pins =
pins =
"GPIO24_AB2", /* CMD */
"GPIO25_Y4", /* DAT0 */
"GPIO26_Y2", /* DAT1 */
......@@ -312,14 +312,14 @@
sdi0_sleep_mode: sdi0_sleep {
sleep_cfg1 {
ste,pins =
pins =
"GPIO18_AC2", /* CMDDIR */
"GPIO19_AC1", /* DAT0DIR */
"GPIO20_AB4"; /* DAT2DIR */
ste,config = <&slpm_out_hi_wkup_pdis>;
};
sleep_cfg2 {
ste,pins =
pins =
"GPIO22_AA3", /* FBCLK */
"GPIO24_AB2", /* CMD */
"GPIO25_Y4", /* DAT0 */
......@@ -329,7 +329,7 @@
ste,config = <&slpm_in_wkup_pdis>;
};
sleep_cfg3 {
ste,pins = "GPIO23_AA4"; /* CLK */
pins = "GPIO23_AA4"; /* CLK */
ste,config = <&slpm_out_lo_wkup_pdis>;
};
};
......@@ -343,15 +343,15 @@
groups = "mc1_a_1";
};
default_cfg1 {
ste,pins = "GPIO208_AH16"; /* CLK */
pins = "GPIO208_AH16"; /* CLK */
ste,config = <&out_lo>;
};
default_cfg2 {
ste,pins = "GPIO209_AG15"; /* FBCLK */
pins = "GPIO209_AG15"; /* FBCLK */
ste,config = <&in_nopull>;
};
default_cfg3 {
ste,pins =
pins =
"GPIO210_AJ15", /* CMD */
"GPIO211_AG14", /* DAT0 */
"GPIO212_AF13", /* DAT1 */
......@@ -363,11 +363,11 @@
sdi1_sleep_mode: sdi1_sleep {
sleep_cfg1 {
ste,pins = "GPIO208_AH16"; /* CLK */
pins = "GPIO208_AH16"; /* CLK */
ste,config = <&slpm_out_lo_wkup_pdis>;
};
sleep_cfg2 {
ste,pins =
pins =
"GPIO209_AG15", /* FBCLK */
"GPIO210_AJ15", /* CMD */
"GPIO211_AG14", /* DAT0 */
......@@ -387,15 +387,15 @@
groups = "mc2_a_1";
};
default_cfg1 {
ste,pins = "GPIO128_A5"; /* CLK */
pins = "GPIO128_A5"; /* CLK */
ste,config = <&out_lo>;
};
default_cfg2 {
ste,pins = "GPIO130_C8"; /* FBCLK */
pins = "GPIO130_C8"; /* FBCLK */
ste,config = <&in_nopull>;
};
default_cfg3 {
ste,pins =
pins =
"GPIO129_B4", /* CMD */
"GPIO131_A12", /* DAT0 */
"GPIO132_C10", /* DAT1 */
......@@ -411,17 +411,17 @@
sdi2_sleep_mode: sdi2_sleep {
sleep_cfg1 {
ste,pins = "GPIO128_A5"; /* CLK */
pins = "GPIO128_A5"; /* CLK */
ste,config = <&out_lo_wkup_pdis>;
};
sleep_cfg2 {
ste,pins =
pins =
"GPIO130_C8", /* FBCLK */
"GPIO129_B4"; /* CMD */
ste,config = <&in_wkup_pdis_en>;
};
sleep_cfg3 {
ste,pins =
pins =
"GPIO131_A12", /* DAT0 */
"GPIO132_C10", /* DAT1 */
"GPIO133_B10", /* DAT2 */
......@@ -443,15 +443,15 @@
groups = "mc4_a_1";
};
default_cfg1 {
ste,pins = "GPIO203_AE23"; /* CLK */
pins = "GPIO203_AE23"; /* CLK */
ste,config = <&out_lo>;
};
default_cfg2 {
ste,pins = "GPIO202_AF25"; /* FBCLK */
pins = "GPIO202_AF25"; /* FBCLK */
ste,config = <&in_nopull>;
};
default_cfg3 {
ste,pins =
pins =
"GPIO201_AF24", /* CMD */
"GPIO200_AH26", /* DAT0 */
"GPIO199_AH23", /* DAT1 */
......@@ -467,11 +467,11 @@
sdi4_sleep_mode: sdi4_sleep {
sleep_cfg1 {
ste,pins = "GPIO203_AE23"; /* CLK */
pins = "GPIO203_AE23"; /* CLK */
ste,config = <&out_lo_wkup_pdis>;
};
sleep_cfg2 {
ste,pins =
pins =
"GPIO202_AF25", /* FBCLK */
"GPIO201_AF24", /* CMD */
"GPIO200_AH26", /* DAT0 */
......@@ -498,7 +498,7 @@
groups = "msp0txrx_a_1", "msp0tfstck_a_1";
};
default_msp0_cfg {
ste,pins =
pins =
"GPIO12_AC4", /* TXD */
"GPIO15_AC3", /* RXD */
"GPIO13_AF3", /* TFS */
......@@ -515,11 +515,11 @@
groups = "msp1txrx_a_1", "msp1_a_1";
};
default_cfg1 {
ste,pins = "GPIO33_AF2";
pins = "GPIO33_AF2";
ste,config = <&out_lo>;
};
default_cfg2 {
ste,pins =
pins =
"GPIO34_AE1",
"GPIO35_AE2",
"GPIO36_AG2";
......@@ -537,14 +537,14 @@
groups = "msp2_a_1";
};
default_cfg1 {
ste,pins =
pins =
"GPIO193_AH27", /* TXD */
"GPIO194_AF27", /* TCK */
"GPIO195_AG28"; /* TFS */
ste,config = <&in_pd>;
};
default_cfg2 {
ste,pins = "GPIO196_AG26"; /* RXD */
pins = "GPIO196_AG26"; /* RXD */
ste,config = <&out_lo>;
};
};
......@@ -558,7 +558,7 @@
groups = "usb_a_1";
};
default_cfg1 {
ste,pins =
pins =
"GPIO256_AF28", /* NXT */
"GPIO258_AD29", /* XCLK */
"GPIO259_AC29", /* DIR */
......@@ -573,25 +573,25 @@
ste,config = <&in_nopull>;
};
default_cfg2 {
ste,pins = "GPIO257_AE29"; /* STP */
pins = "GPIO257_AE29"; /* STP */
ste,config = <&out_hi>;
};
};
musb_sleep_mode: musb_sleep {
sleep_cfg1 {
ste,pins =
pins =
"GPIO256_AF28", /* NXT */
"GPIO258_AD29", /* XCLK */
"GPIO259_AC29"; /* DIR */
ste,config = <&slpm_wkup_pdis_en>;
};
sleep_cfg2 {
ste,pins = "GPIO257_AE29"; /* STP */
pins = "GPIO257_AE29"; /* STP */
ste,config = <&slpm_out_hi_wkup_pdis>;
};
sleep_cfg3 {
ste,pins =
pins =
"GPIO260_AD28", /* DAT7 */
"GPIO261_AD26", /* DAT6 */
"GPIO262_AE26", /* DAT5 */
......@@ -618,7 +618,7 @@
"lcdvsi1_a_1"; /* VSI1 for HDMI */
};
default_cfg1 {
ste,pins =
pins =
"GPIO68_E1", /* VSI0 */
"GPIO69_E2"; /* VSI1 */
ste,config = <&in_pu>;
......@@ -626,7 +626,7 @@
};
lcd_sleep_mode: lcd_sleep {
sleep_cfg1 {
ste,pins = "GPIO69_E2"; /* VSI1 */
pins = "GPIO69_E2"; /* VSI1 */
ste,config = <&slpm_in_wkup_pdis>;
};
};
......@@ -640,7 +640,7 @@
groups = "kp_a_2";
};
default_cfg1 {
ste,pins =
pins =
"GPIO153_B17", /* I7 */
"GPIO154_C16", /* I6 */
"GPIO155_C19", /* I5 */
......@@ -652,7 +652,7 @@
ste,config = <&in_pd>;
};
default_cfg2 {
ste,pins =
pins =
"GPIO157_A18", /* O7 */
"GPIO158_C18", /* O6 */
"GPIO159_B19", /* O5 */
......@@ -666,7 +666,7 @@
};
ske_kpa2_sleep_mode: ske_kpa2_sleep {
sleep_cfg1 {
ste,pins =
pins =
"GPIO153_B17", /* I7 */
"GPIO154_C16", /* I6 */
"GPIO155_C19", /* I5 */
......@@ -678,7 +678,7 @@
ste,config = <&slpm_in_pu_wkup_pdis_en>;
};
sleep_cfg2 {
ste,pins =
pins =
"GPIO157_A18", /* O7 */
"GPIO158_C18", /* O6 */
"GPIO159_B19", /* O5 */
......@@ -700,7 +700,7 @@
groups = "kp_a_1", "kp_oc1_1";
};
default_cfg1 {
ste,pins =
pins =
"GPIO91_B6", /* KP_O0 */
"GPIO90_A3", /* KP_O1 */
"GPIO87_B3", /* KP_O2 */
......@@ -710,7 +710,7 @@
ste,config = <&out_lo>;
};
default_cfg2 {
ste,pins =
pins =
"GPIO93_B7", /* KP_I0 */
"GPIO92_D6", /* KP_I1 */
"GPIO89_E6", /* KP_I2 */
......@@ -729,13 +729,13 @@
* These are plain GPIO pins used by WLAN
*/
default_cfg1 {
ste,pins =
pins =
"GPIO226_AF8", /* WLAN_PMU_EN */
"GPIO85_D5"; /* WLAN_ENA */
ste,config = <&gpio_out_lo>;
};
default_cfg2 {
ste,pins = "GPIO4_AH6"; /* WLAN_IRQ on UART1 */
pins = "GPIO4_AH6"; /* WLAN_IRQ on UART1 */
ste,config = <&gpio_in_pu>;
};
};
......
arch/arm/boot/dts/ste-href-stuib.dtsi
浏览文件 @ 1637d480
......@@ -103,7 +103,7 @@
prox {
prox_stuib_mode: prox_stuib {
stuib_cfg {
ste,pins = "GPIO217_AH12";
pins = "GPIO217_AH12";
ste,config = <&gpio_in_pu>;
};
};
......@@ -111,7 +111,7 @@
hall {
hall_stuib_mode: stuib_tvk {
stuib_cfg {
ste,pins = "GPIO145_C13";
pins = "GPIO145_C13";
ste,config = <&gpio_in_pu>;
};
};
......
arch/arm/boot/dts/ste-href-tvk1281618.dtsi
浏览文件 @ 1637d480
......@@ -130,7 +130,7 @@
tc35893 {
tc35893_tvk_mode: tc35893_tvk {
tvk_cfg {
ste,pins = "GPIO218_AH11";
pins = "GPIO218_AH11";
ste,config = <&gpio_in_pu>;
};
};
......@@ -138,7 +138,7 @@
prox {
prox_tvk_mode: prox_tvk {
tvk_cfg {
ste,pins = "GPIO217_AH12";
pins = "GPIO217_AH12";
ste,config = <&gpio_in_pu>;
};
};
......@@ -146,7 +146,7 @@
hall {
hall_tvk_mode: hall_tvk {
tvk_cfg {
ste,pins = "GPIO145_C13";
pins = "GPIO145_C13";
ste,config = <&gpio_in_pu>;
};
};
......@@ -155,7 +155,7 @@
accel_tvk_mode: accel_tvk {
/* Accelerometer interrupt lines 1 & 2 */
tvk_cfg {
ste,pins = "GPIO82_C1", "GPIO83_D3";
pins = "GPIO82_C1", "GPIO83_D3";
ste,config = <&gpio_in_pu>;
};
};
......@@ -164,11 +164,11 @@
magneto_tvk_mode: magneto_tvk {
/* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */
tvk_cfg1 {
ste,pins = "GPIO31_V3";
pins = "GPIO31_V3";
ste,config = <&gpio_in_pu>;
};
tvk_cfg2 {
ste,pins = "GPIO32_V2";
pins = "GPIO32_V2";
ste,config = <&gpio_in_pd>;
};
};
......
arch/arm/boot/dts/ste-hrefprev60.dtsi
浏览文件 @ 1637d480
......@@ -83,7 +83,7 @@
groups = "ssp0_a_1";
};
hrefprev60_cfg1 {
ste,pins = "GPIO145_C13"; /* RXD */
pins = "GPIO145_C13"; /* RXD */
ste,config = <&in_pd>;
};
......@@ -97,7 +97,7 @@
groups = "mc0dat31dir_a_1";
};
hrefprev60_cfg1 {
ste,pins = "GPIO21_AB3"; /* DAT31DIR */
pins = "GPIO21_AB3"; /* DAT31DIR */
ste,config = <&out_hi>;
};
......@@ -106,7 +106,7 @@
tc35892 {
tc35892_hrefprev60_mode: tc35892_hrefprev60 {
hrefprev60_cfg {
ste,pins = "GPIO217_AH12";
pins = "GPIO217_AH12";
ste,config = <&gpio_in_pu>;
};
};
......@@ -118,7 +118,7 @@
groups = "ipgpio0_c_1", "ipgpio1_c_1";
};
hrefprev60_cfg1 {
ste,pins = "GPIO6_AF6", "GPIO7_AG5";
pins = "GPIO6_AF6", "GPIO7_AG5";
ste,config = <&in_pu>;
};
};
......
arch/arm/boot/dts/ste-hrefv60plus.dtsi
浏览文件 @ 1637d480
......@@ -49,7 +49,7 @@
/* SD card detect GPIO pin, extend default state */
sdi0_default_mode: sdi0_default {
default_hrefv60_cfg1 {
ste,pins = "GPIO95_E8";
pins = "GPIO95_E8";
ste,config = <&gpio_in_pu>;
};
};
......@@ -68,15 +68,15 @@
groups = "ipgpio0_c_1", "ipgpio1_c_1", "ipgpio4_c_1";
};
hrefv60_cfg1 {
ste,pins = "GPIO6_AF6", "GPIO7_AG5";
pins = "GPIO6_AF6", "GPIO7_AG5";
ste,config = <&in_pu>;
};
hrefv60_cfg2 {
ste,pins = "GPIO21_AB3";
pins = "GPIO21_AB3";
ste,config = <&gpio_out_lo>;
};
hrefv60_cfg3 {
ste,pins = "GPIO64_F3";
pins = "GPIO64_F3";
ste,config = <&out_lo>;
};
};
......@@ -89,7 +89,7 @@
*/
etm_hrefv60_mode: etm_hrefv60 {
hrefv60_cfg1 {
ste,pins =
pins =
"GPIO70_G5",
"GPIO71_G4",
"GPIO72_H4",
......@@ -103,11 +103,11 @@
nahj_hrefv60_mode: nahj_hrefv60 {
/* NAHJ CTRL on GPIO76 to low, CTRL_INV on GPIO216 to high */
hrefv60_cfg1 {
ste,pins = "GPIO76_J2";
pins = "GPIO76_J2";
ste,config = <&gpio_out_lo>;
};
hrefv60_cfg2 {
ste,pins = "GPIO216_AG12";
pins = "GPIO216_AG12";
ste,config = <&gpio_out_hi>;
};
};
......@@ -116,13 +116,13 @@
nfc_hrefv60_mode: nfc_hrefv60 {
/* NFC ENA and RESET to low, pulldown IRQ line */
hrefv60_cfg1 {
ste,pins =
pins =
"GPIO77_H1", /* NFC_ENA */
"GPIO142_C11"; /* NFC_RESET */
ste,config = <&gpio_out_lo>;
};
hrefv60_cfg2 {
ste,pins = "GPIO144_B13"; /* NFC_IRQ */
pins = "GPIO144_B13"; /* NFC_IRQ */
ste,config = <&gpio_in_pd>;
};
};
......@@ -130,11 +130,11 @@
force {
force_hrefv60_mode: force_hrefv60 {
hrefv60_cfg1 {
ste,pins = "GPIO91_B6"; /* FORCE_SENSING_INT */
pins = "GPIO91_B6"; /* FORCE_SENSING_INT */
ste,config = <&gpio_in_pu>;
};
hrefv60_cfg2 {
ste,pins =
pins =
"GPIO92_D6", /* FORCE_SENSING_RST */
"GPIO97_D9"; /* FORCE_SENSING_WU */
ste,config = <&gpio_out_lo>;
......@@ -144,7 +144,7 @@
dipro {
dipro_hrefv60_mode: dipro_hrefv60 {
hrefv60_cfg1 {
ste,pins = "GPIO139_C9"; /* DIPRO_INT */
pins = "GPIO139_C9"; /* DIPRO_INT */
ste,config = <&gpio_in_pu>;
};
};
......@@ -153,7 +153,7 @@
vaudio_hf_hrefv60_mode: vaudio_hf_hrefv60 {
/* Audio Amplifier HF enable GPIO */
hrefv60_cfg1 {
ste,pins = "GPIO149_B14"; /* VAUDIO_HF_EN, enable MAX8968 */
pins = "GPIO149_B14"; /* VAUDIO_HF_EN, enable MAX8968 */
ste,config = <&gpio_out_hi>;
};
};
......@@ -165,7 +165,7 @@
* pull low to reset state
*/
hrefv60_cfg1 {
ste,pins = "GPIO171_D23"; /* GBF_ENA_RESET */
pins = "GPIO171_D23"; /* GBF_ENA_RESET */
ste,config = <&gpio_out_lo>;
};
};
......@@ -174,7 +174,7 @@
hdtv_hrefv60_mode: hdtv_hrefv60 {
/* MSP : HDTV INTERFACE GPIO line */
hrefv60_cfg1 {
ste,pins = "GPIO192_AJ27";
pins = "GPIO192_AJ27";
ste,config = <&gpio_in_pd>;
};
};
......@@ -187,11 +187,11 @@
* reset signals low.
*/
hrefv60_cfg1 {
ste,pins = "GPIO143_D12", "GPIO146_D13";
pins = "GPIO143_D12", "GPIO146_D13";
ste,config = <&gpio_out_lo>;
};
hrefv60_cfg2 {
ste,pins = "GPIO67_G2";
pins = "GPIO67_G2";
ste,config = <&gpio_in_pu>;
};
};
......@@ -204,11 +204,11 @@
* Drive DISP1 reset high (not reset), driver DISP2 reset low (reset)
*/
hrefv60_cfg1 {
ste,pins ="GPIO65_F1";
pins ="GPIO65_F1";
ste,config = <&gpio_out_hi>;
};
hrefv60_cfg2 {
ste,pins ="GPIO66_G3";
pins ="GPIO66_G3";
ste,config = <&gpio_out_lo>;
};
};
......
arch/arm/boot/dts/ste-nomadik-s8815.dts
浏览文件 @ 1637d480
......@@ -37,12 +37,12 @@
cd_default_mode: cd_default {
cd_default_cfg1 {
/* CD input GPIO */
ste,pins = "GPIO111_H21";
pins = "GPIO111_H21";
ste,input = <0>;
};
cd_default_cfg2 {
/* CD GPIO biasing */
ste,pins = "GPIO112_J21";
pins = "GPIO112_J21";
ste,output = <0>;
};
};
......@@ -50,7 +50,7 @@
user-led {
user_led_default_mode: user_led_default {
user_led_default_cfg {
ste,pins = "GPIO2_C5";
pins = "GPIO2_C5";
ste,output = <1>;
};
};
......@@ -58,7 +58,7 @@
user-button {
user_button_default_mode: user_button_default {
user_button_default_cfg {
ste,pins = "GPIO3_A4";
pins = "GPIO3_A4";
ste,input = <0>;
};
};
......
arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
浏览文件 @ 1637d480
......@@ -123,18 +123,18 @@
mmcsd_default_mode: mmcsd_default {
mmcsd_default_cfg1 {
/* MCCLK */
ste,pins = "GPIO8_B10";
pins = "GPIO8_B10";
ste,output = <0>;
};
mmcsd_default_cfg2 {
/* MCCMDDIR, MCDAT0DIR, MCDAT31DIR */
ste,pins = "GPIO10_C11", "GPIO15_A12",
pins = "GPIO10_C11", "GPIO15_A12",
"GPIO16_C13";
ste,output = <1>;
};
mmcsd_default_cfg3 {
/* MCCMD, MCDAT3-0, MCMSFBCLK */
ste,pins = "GPIO9_A10", "GPIO11_B11",
pins = "GPIO9_A10", "GPIO11_B11",
"GPIO12_A11", "GPIO13_C12",
"GPIO14_B12", "GPIO24_C15";
ste,input = <1>;
......@@ -150,7 +150,7 @@
};
i2c0_default_mode: i2c0_default {
i2c0_default_cfg {
ste,pins = "GPIO62_D3", "GPIO63_D2";
pins = "GPIO62_D3", "GPIO63_D2";
ste,input = <0>;
};
};
......@@ -164,7 +164,7 @@
};
i2c1_default_mode: i2c1_default {
i2c1_default_cfg {
ste,pins = "GPIO53_L4", "GPIO54_L3";
pins = "GPIO53_L4", "GPIO54_L3";
ste,input = <0>;
};
};
......@@ -172,7 +172,7 @@
i2c2 {
i2c2_default_mode: i2c2_default {
i2c2_default_cfg {
ste,pins = "GPIO73_C21", "GPIO74_C20";
pins = "GPIO73_C21", "GPIO74_C20";
ste,input = <0>;
};
};
......
arch/arm/boot/dts/ste-snowball.dts
浏览文件 @ 1637d480
......@@ -409,12 +409,12 @@
};
/* LAN IRQ pin */
snowball_cfg1 {
ste,pins = "GPIO140_B11";
pins = "GPIO140_B11";
ste,config = <&in_nopull>;
};
/* LAN reset pin */
snowball_cfg2 {
ste,pins = "GPIO141_C12";
pins = "GPIO141_C12";
ste,config = <&gpio_out_hi>;
};
......@@ -427,7 +427,7 @@
groups = "mc0dat31dir_a_1";
};
snowball_cfg1 {
ste,pins = "GPIO21_AB3"; /* DAT31DIR */
pins = "GPIO21_AB3"; /* DAT31DIR */
ste,config = <&out_hi>;
};
......@@ -440,15 +440,15 @@
groups = "ssp0_a_1";
};
snowball_cfg1 {
ste,pins = "GPIO144_B13"; /* FRM */
pins = "GPIO144_B13"; /* FRM */
ste,config = <&gpio_out_hi>;
};
snowball_cfg2 {
ste,pins = "GPIO145_C13"; /* RXD */
pins = "GPIO145_C13"; /* RXD */
ste,config = <&in_pd>;
};
snowball_cfg3 {
ste,pins =
pins =
"GPIO146_D13", /* TXD */
"GPIO143_D12"; /* CLK */
ste,config = <&out_lo>;
......@@ -459,7 +459,7 @@
gpio_led {
gpioled_snowball_mode: gpioled_default {
snowball_cfg1 {
ste,pins = "GPIO142_C11";
pins = "GPIO142_C11";
ste,config = <&gpio_out_hi>;
};
......@@ -469,7 +469,7 @@
accel_snowball_mode: accel_snowball {
/* Accelerometer lines */
snowball_cfg1 {
ste,pins =
pins =
"GPIO163_C20", /* ACCEL_IRQ1 */
"GPIO164_B21"; /* ACCEL_IRQ2 */
ste,config = <&gpio_in_pu>;
......@@ -479,7 +479,7 @@
magnetometer {
magneto_snowball_mode: magneto_snowball {
snowball_cfg1 {
ste,pins = "GPIO165_C21"; /* MAG_DRDY */
pins = "GPIO165_C21"; /* MAG_DRDY */
ste,config = <&gpio_in_pu>;
};
};
......@@ -491,7 +491,7 @@
* pull low to reset state
*/
snowball_cfg1 {
ste,pins = "GPIO171_D23"; /* GBF_ENA_RESET */
pins = "GPIO171_D23"; /* GBF_ENA_RESET */
ste,config = <&gpio_out_lo>;
};
};
......@@ -503,13 +503,13 @@
* These are plain GPIO pins used by WLAN
*/
snowball_cfg1 {
ste,pins =
pins =
"GPIO161_D21", /* WLAN_PMU_EN */
"GPIO215_AH13"; /* WLAN_ENA */
ste,config = <&gpio_out_lo>;
};
snowball_cfg2 {
ste,pins = "GPIO216_AG12"; /* WLAN_IRQ */
pins = "GPIO216_AG12"; /* WLAN_IRQ */
ste,config = <&gpio_in_pu>;
};
};
......
drivers/pinctrl/nomadik/pinctrl-nomadik.c
浏览文件 @ 1637d480
......@@ -1552,7 +1552,7 @@ static int nmk_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
const char *gpio_name;
const char *pin;
ret = of_property_count_strings(np, "ste,pins");
ret = of_property_count_strings(np, "pins");
if (ret < 0)
goto exit;
ret = pinctrl_utils_reserve_map(pctldev, map,
......@@ -1561,7 +1561,7 @@ static int nmk_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
if (ret < 0)
goto exit;
of_property_for_each_string(np, "ste,pins", prop, pin) {
of_property_for_each_string(np, "pins", prop, pin) {
gpio_name = nmk_find_pin_name(pctldev, pin);
ret = nmk_dt_add_map_configs(map, reserved_maps,
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或