提交 158304ef 编写于 作者: R Russell King 提交者: Russell King

Merge branch 'fixes' into devel

......@@ -357,7 +357,6 @@ config ARCH_SA1100
config ARCH_S3C2410
bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
select GENERIC_GPIO
select GENERIC_TIME
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
......
......@@ -76,6 +76,7 @@ EXPORT_SYMBOL(__const_udelay);
/* networking */
EXPORT_SYMBOL(csum_partial);
EXPORT_SYMBOL(csum_partial_copy_from_user);
EXPORT_SYMBOL(csum_partial_copy_nocheck);
EXPORT_SYMBOL(__csum_ipv6_magic);
......
......@@ -52,21 +52,15 @@ static int save_trace(struct stackframe *frame, void *d)
return trace->nr_entries >= trace->max_entries;
}
void save_stack_trace(struct stack_trace *trace, struct task_struct *task)
void save_stack_trace(struct stack_trace *trace)
{
struct stack_trace_data data;
unsigned long fp, base;
data.trace = trace;
data.skip = trace->skip;
if (task) {
base = (unsigned long)task_stack_page(task);
fp = 0; /* FIXME */
} else {
base = (unsigned long)task_stack_page(current);
asm("mov %0, fp" : "=r" (fp));
}
base = (unsigned long)task_stack_page(current);
asm("mov %0, fp" : "=r" (fp));
walk_stackframe(fp, base, base + THREAD_SIZE, save_trace, &data);
}
......
......@@ -43,6 +43,7 @@ obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o
# LEDs support
led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o
led-$(CONFIG_MACH_AT91RM9200EK) += leds.o
led-$(CONFIG_MACH_AT91SAM9261EK)+= leds.o
led-$(CONFIG_MACH_CSB337) += leds.o
led-$(CONFIG_MACH_CSB637) += leds.o
led-$(CONFIG_MACH_KB9200) += leds.o
......
......@@ -60,6 +60,9 @@ static void __init ek_map_io(void)
/* Initialize processor: 18.432 MHz crystal */
at91sam9261_initialize(18432000);
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
/* Setup the serial ports and console */
at91_init_serial(&ek_uart_config);
}
......
......@@ -102,7 +102,7 @@ EXPORT_SYMBOL(__readb);
EXPORT_SYMBOL(__readw);
EXPORT_SYMBOL(__readl);
void readsw(void __iomem *addr, void *data, int len)
void readsw(const void __iomem *addr, void *data, int len)
{
void __iomem *a = __isamem_convert_addr(addr);
......@@ -112,7 +112,7 @@ void readsw(void __iomem *addr, void *data, int len)
}
EXPORT_SYMBOL(readsw);
void readsl(void __iomem *addr, void *data, int len)
void readsl(const void __iomem *addr, void *data, int len)
{
void __iomem *a = __isamem_convert_addr(addr);
......@@ -157,7 +157,7 @@ EXPORT_SYMBOL(__writeb);
EXPORT_SYMBOL(__writew);
EXPORT_SYMBOL(__writel);
void writesw(void __iomem *addr, void *data, int len)
void writesw(void __iomem *addr, const void *data, int len)
{
void __iomem *a = __isamem_convert_addr(addr);
......@@ -167,7 +167,7 @@ void writesw(void __iomem *addr, void *data, int len)
}
EXPORT_SYMBOL(writesw);
void writesl(void __iomem *addr, void *data, int len)
void writesl(void __iomem *addr, const void *data, int len)
{
void __iomem *a = __isamem_convert_addr(addr);
......
......@@ -326,7 +326,7 @@ static struct omap_lcd_config h2_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel h2_config[] = {
static struct omap_board_config_kernel h2_config[] __initdata = {
{ OMAP_TAG_USB, &h2_usb_config },
{ OMAP_TAG_MMC, &h2_mmc_config },
{ OMAP_TAG_UART, &h2_uart_config },
......
//kernel/linux-omap-fsample/arch/arm/mach-omap1/pm.c#3 - integrate change 4545 (text)
/*
* linux/arch/arm/mach-omap1/pm.c
*
......@@ -377,7 +376,7 @@ void omap_pm_suspend(void)
* Jump to assembly code. The processor will stay there
* until wake up.
*/
omap_sram_suspend(arg0, arg1);
omap_sram_suspend(arg0, arg1);
/*
* If we are here, processor is woken up!
......@@ -631,10 +630,6 @@ static int omap_pm_prepare(suspend_state_t state)
case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
break;
case PM_SUSPEND_DISK:
return -ENOTSUPP;
default:
return -EINVAL;
}
......@@ -657,10 +652,6 @@ static int omap_pm_enter(suspend_state_t state)
case PM_SUSPEND_MEM:
omap_pm_suspend();
break;
case PM_SUSPEND_DISK:
return -ENOTSUPP;
default:
return -EINVAL;
}
......
......@@ -43,7 +43,7 @@ struct pin_config __initdata_or_module omap24xx_pins[] = {
/* 24xx I2C */
MUX_CFG_24XX("M19_24XX_I2C1_SCL", 0x111, 0, 0, 0, 1)
MUX_CFG_24XX("L15_24XX_I2C1_SDA", 0x112, 0, 0, 0, 1)
MUX_CFG_24XX("J15_24XX_I2C2_SCL", 0x113, 0, 0, 0, 1)
MUX_CFG_24XX("J15_24XX_I2C2_SCL", 0x113, 0, 0, 1, 1)
MUX_CFG_24XX("H19_24XX_I2C2_SDA", 0x114, 0, 0, 0, 1)
/* Menelaus interrupt */
......@@ -52,7 +52,9 @@ MUX_CFG_24XX("W19_24XX_SYS_NIRQ", 0x12c, 0, 1, 1, 1)
/* 24xx clocks */
MUX_CFG_24XX("W14_24XX_SYS_CLKOUT", 0x137, 0, 1, 1, 1)
/* 24xx GPMC wait pin monitoring */
/* 24xx GPMC chipselects, wait pin monitoring */
MUX_CFG_24XX("E2_GPMC_NCS2", 0x08e, 0, 1, 1, 1)
MUX_CFG_24XX("L2_GPMC_NCS7", 0x093, 0, 1, 1, 1)
MUX_CFG_24XX("L3_GPMC_WAIT0", 0x09a, 0, 1, 1, 1)
MUX_CFG_24XX("N7_GPMC_WAIT1", 0x09b, 0, 1, 1, 1)
MUX_CFG_24XX("M1_GPMC_WAIT2", 0x09c, 0, 1, 1, 1)
......@@ -66,6 +68,7 @@ MUX_CFG_24XX("V15_24XX_MCBSP2_DX", 0x127, 1, 1, 0, 1)
/* 24xx GPIO */
MUX_CFG_24XX("M21_242X_GPIO11", 0x0c9, 3, 1, 1, 1)
MUX_CFG_24XX("P21_242X_GPIO12", 0x0ca, 3, 0, 0, 1)
MUX_CFG_24XX("AA10_242X_GPIO13", 0x0e5, 3, 0, 0, 1)
MUX_CFG_24XX("AA6_242X_GPIO14", 0x0e6, 3, 0, 0, 1)
MUX_CFG_24XX("AA4_242X_GPIO15", 0x0e7, 3, 0, 0, 1)
......@@ -75,7 +78,9 @@ MUX_CFG_24XX("AA8_242X_GPIO58", 0x0ea, 3, 0, 0, 1)
MUX_CFG_24XX("Y20_24XX_GPIO60", 0x12c, 3, 0, 0, 1)
MUX_CFG_24XX("W4__24XX_GPIO74", 0x0f2, 3, 0, 0, 1)
MUX_CFG_24XX("M15_24XX_GPIO92", 0x10a, 3, 0, 0, 1)
MUX_CFG_24XX("J15_24XX_GPIO99", 0x113, 3, 1, 1, 1)
MUX_CFG_24XX("V14_24XX_GPIO117", 0x128, 3, 1, 0, 1)
MUX_CFG_24XX("P14_24XX_GPIO125", 0x140, 3, 1, 1, 1)
/* 242x DBG GPIO */
MUX_CFG_24XX("V4_242X_GPIO49", 0xd3, 3, 0, 0, 1)
......@@ -118,6 +123,30 @@ MUX_CFG_24XX("E18_24XX_MMC_DAT_DIR3", 0x0fc, 0, 0, 0, 1)
MUX_CFG_24XX("G18_24XX_MMC_CMD_DIR", 0x0fd, 0, 0, 0, 1)
MUX_CFG_24XX("H15_24XX_MMC_CLKI", 0x0fe, 0, 0, 0, 1)
/* Full speed USB */
MUX_CFG_24XX("J20_24XX_USB0_PUEN", 0x11d, 0, 0, 0, 1)
MUX_CFG_24XX("J19_24XX_USB0_VP", 0x11e, 0, 0, 0, 1)
MUX_CFG_24XX("K20_24XX_USB0_VM", 0x11f, 0, 0, 0, 1)
MUX_CFG_24XX("J18_24XX_USB0_RCV", 0x120, 0, 0, 0, 1)
MUX_CFG_24XX("K19_24XX_USB0_TXEN", 0x121, 0, 0, 0, 1)
MUX_CFG_24XX("J14_24XX_USB0_SE0", 0x122, 0, 0, 0, 1)
MUX_CFG_24XX("K18_24XX_USB0_DAT", 0x123, 0, 0, 0, 1)
MUX_CFG_24XX("N14_24XX_USB1_SE0", 0x0ed, 2, 0, 0, 1)
MUX_CFG_24XX("W12_24XX_USB1_SE0", 0x0dd, 3, 0, 0, 1)
MUX_CFG_24XX("P15_24XX_USB1_DAT", 0x0ee, 2, 0, 0, 1)
MUX_CFG_24XX("R13_24XX_USB1_DAT", 0x0e0, 3, 0, 0, 1)
MUX_CFG_24XX("W20_24XX_USB1_TXEN", 0x0ec, 2, 0, 0, 1)
MUX_CFG_24XX("P13_24XX_USB1_TXEN", 0x0df, 3, 0, 0, 1)
MUX_CFG_24XX("V19_24XX_USB1_RCV", 0x0eb, 2, 0, 0, 1)
MUX_CFG_24XX("V12_24XX_USB1_RCV", 0x0de, 3, 0, 0, 1)
MUX_CFG_24XX("AA10_24XX_USB2_SE0", 0x0e5, 2, 0, 0, 1)
MUX_CFG_24XX("Y11_24XX_USB2_DAT", 0x0e8, 2, 0, 0, 1)
MUX_CFG_24XX("AA12_24XX_USB2_TXEN", 0x0e9, 2, 0, 0, 1)
MUX_CFG_24XX("AA6_24XX_USB2_RCV", 0x0e6, 2, 0, 0, 1)
MUX_CFG_24XX("AA4_24XX_USB2_TLLSE0", 0x0e7, 2, 0, 0, 1)
/* Keypad GPIO*/
MUX_CFG_24XX("T19_24XX_KBR0", 0x106, 3, 1, 1, 1)
MUX_CFG_24XX("R19_24XX_KBR1", 0x107, 3, 1, 1, 1)
......
......@@ -747,7 +747,7 @@ int omap_set_dma_callback(int lch,
*/
dma_addr_t omap_get_dma_src_pos(int lch)
{
dma_addr_t offset;
dma_addr_t offset = 0;
if (cpu_class_is_omap1())
offset = (dma_addr_t) (OMAP1_DMA_CSSA_L_REG(lch) |
......@@ -769,7 +769,7 @@ dma_addr_t omap_get_dma_src_pos(int lch)
*/
dma_addr_t omap_get_dma_dst_pos(int lch)
{
dma_addr_t offset;
dma_addr_t offset = 0;
if (cpu_class_is_omap1())
offset = (dma_addr_t) (OMAP1_DMA_CDSA_L_REG(lch) |
......
......@@ -83,10 +83,21 @@ int __init_or_module omap_cfg_reg(const unsigned long index)
reg |= OMAP24XX_PULL_ENA;
if(cfg->pu_pd_val)
reg |= OMAP24XX_PULL_UP;
#ifdef CONFIG_OMAP_MUX_DEBUG
printk("Muxing %s (0x%08x): 0x%02x -> 0x%02x\n",
cfg->name, OMAP24XX_L4_BASE + cfg->mux_reg,
omap_readb(OMAP24XX_L4_BASE + cfg->mux_reg), reg);
#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
{
u8 orig = omap_readb(OMAP24XX_L4_BASE + cfg->mux_reg);
u8 debug = 0;
#ifdef CONFIG_OMAP_MUX_DEBUG
debug = cfg->debug;
#endif
warn = (orig != reg);
if (debug || warn)
printk("MUX: setup %s (0x%08x): 0x%02x -> 0x%02x\n",
cfg->name,
OMAP24XX_L4_BASE + cfg->mux_reg,
orig, reg);
}
#endif
omap_writeb(reg, OMAP24XX_L4_BASE + cfg->mux_reg);
......
......@@ -71,22 +71,5 @@
/* Clocks */
#define AT91_SLOW_CLOCK 32768 /* slow clock */
#ifndef __ASSEMBLY__
#include <asm/io.h>
static inline unsigned int at91_sys_read(unsigned int reg_offset)
{
void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
return __raw_readl(addr + reg_offset);
}
static inline void at91_sys_write(unsigned int reg_offset, unsigned long value)
{
void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
__raw_writel(value, addr + reg_offset);
}
#endif
#endif
......@@ -29,4 +29,22 @@
#define __mem_pci(a) (a)
#ifndef __ASSEMBLY__
static inline unsigned int at91_sys_read(unsigned int reg_offset)
{
void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
return __raw_readl(addr + reg_offset);
}
static inline void at91_sys_write(unsigned int reg_offset, unsigned long value)
{
void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
__raw_writel(value, addr + reg_offset);
}
#endif
#endif
......@@ -21,6 +21,7 @@
#ifndef __ASM_ARCH_IRQS_H
#define __ASM_ARCH_IRQS_H
#include <asm/io.h>
#include <asm/arch/at91_aic.h>
#define NR_AIC_IRQS 32
......
......@@ -21,7 +21,7 @@
#ifndef __ASM_ARCH_UNCOMPRESS_H
#define __ASM_ARCH_UNCOMPRESS_H
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/arch/at91_dbgu.h>
/*
......
......@@ -27,7 +27,7 @@
extern void __iomem * __iop13xx_io(unsigned long io_addr);
extern void __iomem *__iop13xx_ioremap(unsigned long cookie, size_t size,
unsigned long flags);
unsigned int mtype);
extern void __iop13xx_iounmap(void __iomem *addr);
extern u32 iop13xx_atue_mem_base;
......
......@@ -14,7 +14,7 @@
#include <asm/hardware.h>
extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
unsigned long flags);
unsigned int mtype);
extern void __iop3xx_iounmap(void __iomem *addr);
#define IO_SPACE_LIMIT 0xffffffff
......
......@@ -14,7 +14,7 @@
#include <asm/hardware.h>
extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
unsigned long flags);
unsigned int mtype);
extern void __iop3xx_iounmap(void __iomem *addr);
#define IO_SPACE_LIMIT 0xffffffff
......
......@@ -421,7 +421,9 @@ enum omap24xx_index {
/* 24xx clock */
W14_24XX_SYS_CLKOUT,
/* 24xx GPMC wait pin monitoring */
/* 24xx GPMC chipselects, wait pin monitoring */
E2_GPMC_NCS2,
L2_GPMC_NCS7,
L3_GPMC_WAIT0,
N7_GPMC_WAIT1,
M1_GPMC_WAIT2,
......@@ -435,6 +437,7 @@ enum omap24xx_index {
/* 24xx GPIO */
M21_242X_GPIO11,
P21_242X_GPIO12,
AA10_242X_GPIO13,
AA6_242X_GPIO14,
AA4_242X_GPIO15,
......@@ -444,7 +447,9 @@ enum omap24xx_index {
Y20_24XX_GPIO60,
W4__24XX_GPIO74,
M15_24XX_GPIO92,
J15_24XX_GPIO99,
V14_24XX_GPIO117,
P14_24XX_GPIO125,
/* 242x DBG GPIO */
V4_242X_GPIO49,
......@@ -486,6 +491,30 @@ enum omap24xx_index {
G18_24XX_MMC_CMD_DIR,
H15_24XX_MMC_CLKI,
/* Full speed USB */
J20_24XX_USB0_PUEN,
J19_24XX_USB0_VP,
K20_24XX_USB0_VM,
J18_24XX_USB0_RCV,
K19_24XX_USB0_TXEN,
J14_24XX_USB0_SE0,
K18_24XX_USB0_DAT,
N14_24XX_USB1_SE0,
W12_24XX_USB1_SE0,
P15_24XX_USB1_DAT,
R13_24XX_USB1_DAT,
W20_24XX_USB1_TXEN,
P13_24XX_USB1_TXEN,
V19_24XX_USB1_RCV,
V12_24XX_USB1_RCV,
AA10_24XX_USB2_SE0,
Y11_24XX_USB2_DAT,
AA12_24XX_USB2_TXEN,
AA6_24XX_USB2_RCV,
AA4_24XX_USB2_TLLSE0,
/* Keypad GPIO*/
T19_24XX_KBR0,
R19_24XX_KBR1,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册