Merge tag 'samsung-soc' of...

Merge tag 'samsung-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc

Samsung SoC updates for v4.4

- use PWM lookup table with pwm_add_table() for the following boards
  : s3c24xx h1940 and rx1950
  : s3c64xx smdk6410, crag6410, hmt and smartq
- document: update bootloader interface on exynos542x

* tag 'samsung-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  Documentation: EXYNOS: Update bootloader interface on exynos542x
  ARM: S3C64XX: Use PWM lookup table for mach-smartq
  ARM: S3C64XX: Use PWM lookup table for mach-hmt
  ARM: S3C64XX: Use PWM lookup table for mach-crag6410
  ARM: S3C64XX: Use PWM lookup table for smdk6410
  ARM: S3C24XX: Use PWM lookup table for mach-rx1950
  ARM: S3C24XX: Use PWM lookup table for mach-h1940
Signed-off-by: NOlof Johansson <olof@lixom.net>

Documentation/arm/Samsung/Bootloader-interface.txt

@@ -19,7 +19,7 @@ executing kernel.
 Address:      sysram_ns_base_addr
 Offset        Value                                        Purpose
 =============================================================================
-0x08          exynos_cpu_resume_ns                         System suspend
+0x08          exynos_cpu_resume_ns, mcpm_entry_point       System suspend
 0x0c          0x00000bad (Magic cookie)                    System suspend
 0x1c          exynos4_secondary_startup                    Secondary CPU boot
 0x1c + 4*cpu  exynos4_secondary_startup (Exynos4412)       Secondary CPU boot
@@ -56,7 +56,8 @@ Offset        Value                                        Purpose
 Address:      pmu_base_addr
 Offset        Value                           Purpose
 =============================================================================
-0x0908        Non-zero (only Exynos3250)      Secondary CPU boot up indicator
+0x0908        Non-zero                        Secondary CPU boot up indicator
+                                              on Exynos3250 and Exynos542x
 
 
 4. Glossary

arch/arm/mach-s3c24xx/mach-h1940.c

@@ -25,6 +25,7 @@
 #include <linux/gpio.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/i2c.h>
 #include <linux/leds.h>
@@ -469,6 +470,11 @@ static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = {
 	.ocr_avail     = MMC_VDD_32_33,
 };
 
+static struct pwm_lookup h1940_pwm_lookup[] = {
+	PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight", NULL, 36296,
+		   PWM_POLARITY_NORMAL),
+};
+
 static int h1940_backlight_init(struct device *dev)
 {
 	gpio_request(S3C2410_GPB(0), "Backlight");
@@ -503,11 +509,8 @@ static void h1940_backlight_exit(struct device *dev)
 
 
 static struct platform_pwm_backlight_data backlight_data = {
-	.pwm_id         = 0,
 	.max_brightness = 100,
 	.dft_brightness = 50,
-	/* tcnt = 0x31 */
-	.pwm_period_ns  = 36296,
 	.enable_gpio    = -1,
 	.init           = h1940_backlight_init,
 	.notify		= h1940_backlight_notify,
@@ -725,6 +728,7 @@ static void __init h1940_init(void)
 	gpio_request(H1940_LATCH_SD_POWER, "SD power");
 	gpio_direction_output(H1940_LATCH_SD_POWER, 0);
 
+	pwm_add_table(h1940_pwm_lookup, ARRAY_SIZE(h1940_pwm_lookup));
 	platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
 
 	gpio_request(S3C2410_GPA(1), "Red LED blink");

arch/arm/mach-s3c24xx/mach-rx1950.c

@@ -375,6 +375,11 @@ static struct s3c2410fb_mach_info rx1950_lcd_cfg = {
 
 };
 
+static struct pwm_lookup rx1950_pwm_lookup[] = {
+	PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight.0", NULL, 48000,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct pwm_device *lcd_pwm;
 
 static void rx1950_lcd_power(int enable)
@@ -520,10 +525,8 @@ static int rx1950_backlight_notify(struct device *dev, int brightness)
 }
 
 static struct platform_pwm_backlight_data rx1950_backlight_data = {
-	.pwm_id = 0,
 	.max_brightness = 24,
 	.dft_brightness = 4,
-	.pwm_period_ns = 48000,
 	.enable_gpio = -1,
 	.init = rx1950_backlight_init,
 	.notify = rx1950_backlight_notify,
@@ -792,6 +795,7 @@ static void __init rx1950_init_machine(void)
 	gpio_direction_output(S3C2410_GPA(4), 0);
 	gpio_direction_output(S3C2410_GPJ(6), 0);
 
+	pwm_add_table(rx1950_pwm_lookup, ARRAY_SIZE(rx1950_pwm_lookup));
 	platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices));
 
 	i2c_register_board_info(0, rx1950_i2c_devices,

arch/arm/mach-s3c64xx/dev-backlight.c

@@ -69,7 +69,6 @@ static struct samsung_bl_drvdata samsung_dfl_bl_data __initdata = {
 	.plat_data = {
 		.max_brightness = 255,
 		.dft_brightness = 255,
-		.pwm_period_ns  = 78770,
 		.enable_gpio    = -1,
 		.init           = samsung_bl_init,
 		.exit           = samsung_bl_exit,
@@ -111,7 +110,6 @@ void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
 	samsung_bl_data = &samsung_bl_drvdata->plat_data;
 
 	/* Copy board specific data provided by user */
-	samsung_bl_data->pwm_id = bl_data->pwm_id;
 	samsung_bl_device->dev.parent = &samsung_device_pwm.dev;
 
 	if (bl_data->max_brightness)
@@ -120,8 +118,6 @@ void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
 		samsung_bl_data->dft_brightness = bl_data->dft_brightness;
 	if (bl_data->lth_brightness)
 		samsung_bl_data->lth_brightness = bl_data->lth_brightness;
-	if (bl_data->pwm_period_ns)
-		samsung_bl_data->pwm_period_ns = bl_data->pwm_period_ns;
 	if (bl_data->enable_gpio >= 0)
 		samsung_bl_data->enable_gpio = bl_data->enable_gpio;
 	if (bl_data->init)

arch/arm/mach-s3c64xx/mach-crag6410.c

@@ -25,6 +25,7 @@
 #include <linux/mmc/host.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/dm9000.h>
 #include <linux/gpio_keys.h>
@@ -108,11 +109,14 @@ static struct s3c2410_uartcfg crag6410_uartcfgs[] __initdata = {
 	},
 };
 
+static struct pwm_lookup crag6410_pwm_lookup[] = {
+	PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight", NULL, 100000,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct platform_pwm_backlight_data crag6410_backlight_data = {
-	.pwm_id		= 0,
 	.max_brightness	= 1000,
 	.dft_brightness	= 600,
-	.pwm_period_ns	= 100000,	/* about 1kHz */
 	.enable_gpio	= -1,
 };
 
@@ -843,6 +847,7 @@ static void __init crag6410_machine_init(void)
 	samsung_keypad_set_platdata(&crag6410_keypad_data);
 	s3c64xx_spi0_set_platdata(NULL, 0, 2);
 
+	pwm_add_table(crag6410_pwm_lookup, ARRAY_SIZE(crag6410_pwm_lookup));
 	platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices));
 
 	gpio_led_register_device(-1, &gpio_leds_pdata);

arch/arm/mach-s3c64xx/mach-hmt.c

@@ -19,6 +19,7 @@
 #include <linux/gpio.h>
 #include <linux/delay.h>
 #include <linux/leds.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -73,6 +74,11 @@ static struct s3c2410_uartcfg hmt_uartcfgs[] __initdata = {
 	},
 };
 
+static struct pwm_lookup hmt_pwm_lookup[] = {
+	PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", NULL,
+		   1000000000 / (100 * 256 * 20), PWM_POLARITY_NORMAL),
+};
+
 static int hmt_bl_init(struct device *dev)
 {
 	int ret;
@@ -110,10 +116,8 @@ static void hmt_bl_exit(struct device *dev)
 }
 
 static struct platform_pwm_backlight_data hmt_backlight_data = {
-	.pwm_id		= 1,
 	.max_brightness	= 100 * 256,
 	.dft_brightness	= 40 * 256,
-	.pwm_period_ns	= 1000000000 / (100 * 256 * 20),
 	.enable_gpio	= -1,
 	.init		= hmt_bl_init,
 	.notify		= hmt_bl_notify,
@@ -268,6 +272,7 @@ static void __init hmt_machine_init(void)
 	gpio_request(S3C64XX_GPF(13), "usb power");
 	gpio_direction_output(S3C64XX_GPF(13), 1);
 
+	pwm_add_table(hmt_pwm_lookup, ARRAY_SIZE(hmt_pwm_lookup));
 	platform_add_devices(hmt_devices, ARRAY_SIZE(hmt_devices));
 }
 

arch/arm/mach-s3c64xx/mach-smartq.c

@@ -14,6 +14,7 @@
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/serial_core.h>
 #include <linux/serial_s3c.h>
@@ -139,6 +140,11 @@ static struct platform_device smartq_usb_otg_vbus_dev = {
 	.dev.platform_data	= &smartq_usb_otg_vbus_pdata,
 };
 
+static struct pwm_lookup smartq_pwm_lookup[] = {
+	PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", NULL,
+		   1000000000 / (1000 * 20), PWM_POLARITY_NORMAL),
+};
+
 static int smartq_bl_init(struct device *dev)
 {
     s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2));
@@ -147,10 +153,8 @@ static int smartq_bl_init(struct device *dev)
 }
 
 static struct platform_pwm_backlight_data smartq_backlight_data = {
-	.pwm_id		= 1,
 	.max_brightness	= 1000,
 	.dft_brightness	= 600,
-	.pwm_period_ns	= 1000000000 / (1000 * 20),
 	.enable_gpio	= -1,
 	.init		= smartq_bl_init,
 };
@@ -396,5 +400,6 @@ void __init smartq_machine_init(void)
 	WARN_ON(smartq_usb_host_init());
 	WARN_ON(smartq_wifi_init());
 
+	pwm_add_table(smartq_pwm_lookup, ARRAY_SIZE(smartq_pwm_lookup));
 	platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices));
 }

arch/arm/mach-s3c64xx/mach-smdk6410.c

@@ -30,6 +30,7 @@
 #include <linux/smsc911x.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/platform_data/s3c-hsotg.h>
 
@@ -623,8 +624,12 @@ static struct samsung_bl_gpio_info smdk6410_bl_gpio_info = {
 	.func = S3C_GPIO_SFN(2),
 };
 
+static struct pwm_lookup smdk6410_pwm_lookup[] = {
+	PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", NULL, 78770,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct platform_pwm_backlight_data smdk6410_bl_data = {
-	.pwm_id = 1,
 	.enable_gpio = -1,
 };
 
@@ -695,6 +700,7 @@ static void __init smdk6410_machine_init(void)
 
 	platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
 
+	pwm_add_table(smdk6410_pwm_lookup, ARRAY_SIZE(smdk6410_pwm_lookup));
 	samsung_bl_set(&smdk6410_bl_gpio_info, &smdk6410_bl_data);
 }