iio: accel: kxcjk1013: add support for KXTF9

KXTF9 has mostly compatible register layout to KXCJK accelerometer.
There is no motion direction interrupt support, but there is tap
direction detection instead (not implemented in this patch).
Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

drivers/iio/accel/Kconfig

@@ -219,8 +219,8 @@ config KXCJK1013
 	select IIO_TRIGGERED_BUFFER
 	help
 	  Say Y here if you want to build a driver for the Kionix KXCJK-1013
-	  triaxial acceleration sensor. This driver also supports KXCJ9-1008
-	  and KXTJ2-1009.
+	  triaxial acceleration sensor. This driver also supports KXCJ9-1008,
+	  KXTJ2-1009 and KXTF9.
 
 	  To compile this driver as a module, choose M here: the module will
 	  be called kxcjk-1013.

drivers/iio/accel/kxcjk-1013.c

@@ -34,6 +34,13 @@
 #define KXCJK1013_DRV_NAME "kxcjk1013"
 #define KXCJK1013_IRQ_NAME "kxcjk1013_event"
 
+#define KXTF9_REG_HP_XOUT_L		0x00
+#define KXTF9_REG_HP_XOUT_H		0x01
+#define KXTF9_REG_HP_YOUT_L		0x02
+#define KXTF9_REG_HP_YOUT_H		0x03
+#define KXTF9_REG_HP_ZOUT_L		0x04
+#define KXTF9_REG_HP_ZOUT_H		0x05
+
 #define KXCJK1013_REG_XOUT_L		0x06
 /*
  * From low byte X axis register, all the other addresses of Y and Z can be
@@ -48,17 +55,33 @@
 
 #define KXCJK1013_REG_DCST_RESP		0x0C
 #define KXCJK1013_REG_WHO_AM_I		0x0F
-#define KXCJK1013_REG_INT_SRC1		0x16
+#define KXTF9_REG_TILT_POS_CUR		0x10
+#define KXTF9_REG_TILT_POS_PREV		0x11
+#define KXTF9_REG_INT_SRC1		0x15
+#define KXCJK1013_REG_INT_SRC1		0x16	/* compatible, but called INT_SRC2 in KXTF9 ds */
 #define KXCJK1013_REG_INT_SRC2		0x17
 #define KXCJK1013_REG_STATUS_REG	0x18
 #define KXCJK1013_REG_INT_REL		0x1A
 #define KXCJK1013_REG_CTRL1		0x1B
-#define KXCJK1013_REG_CTRL2		0x1D
+#define KXTF9_REG_CTRL2			0x1C
+#define KXCJK1013_REG_CTRL2		0x1D	/* mostly compatible, CTRL_REG3 in KTXF9 ds */
 #define KXCJK1013_REG_INT_CTRL1		0x1E
 #define KXCJK1013_REG_INT_CTRL2		0x1F
+#define KXTF9_REG_INT_CTRL3		0x20
 #define KXCJK1013_REG_DATA_CTRL		0x21
+#define KXTF9_REG_TILT_TIMER		0x28
 #define KXCJK1013_REG_WAKE_TIMER	0x29
+#define KXTF9_REG_TDT_TIMER		0x2B
+#define KXTF9_REG_TDT_THRESH_H		0x2C
+#define KXTF9_REG_TDT_THRESH_L		0x2D
+#define KXTF9_REG_TDT_TAP_TIMER		0x2E
+#define KXTF9_REG_TDT_TOTAL_TIMER	0x2F
+#define KXTF9_REG_TDT_LATENCY_TIMER	0x30
+#define KXTF9_REG_TDT_WINDOW_TIMER	0x31
 #define KXCJK1013_REG_SELF_TEST		0x3A
+#define KXTF9_REG_WAKE_THRESH		0x5A
+#define KXTF9_REG_TILT_ANGLE		0x5C
+#define KXTF9_REG_HYST_SET		0x5F
 #define KXCJK1013_REG_WAKE_THRES	0x6A
 
 #define KXCJK1013_REG_CTRL1_BIT_PC1	BIT(7)
@@ -68,18 +91,32 @@
 #define KXCJK1013_REG_CTRL1_BIT_GSEL0	BIT(3)
 #define KXCJK1013_REG_CTRL1_BIT_WUFE	BIT(1)
 
+#define KXCJK1013_REG_INT_CTRL1_BIT_IEU	BIT(2)	/* KXTF9 */
 #define KXCJK1013_REG_INT_CTRL1_BIT_IEL	BIT(3)
 #define KXCJK1013_REG_INT_CTRL1_BIT_IEA	BIT(4)
 #define KXCJK1013_REG_INT_CTRL1_BIT_IEN	BIT(5)
 
+#define KXTF9_REG_TILT_BIT_LEFT_EDGE	BIT(5)
+#define KXTF9_REG_TILT_BIT_RIGHT_EDGE	BIT(4)
+#define KXTF9_REG_TILT_BIT_LOWER_EDGE	BIT(3)
+#define KXTF9_REG_TILT_BIT_UPPER_EDGE	BIT(2)
+#define KXTF9_REG_TILT_BIT_FACE_DOWN	BIT(1)
+#define KXTF9_REG_TILT_BIT_FACE_UP	BIT(0)
+
 #define KXCJK1013_DATA_MASK_12_BIT	0x0FFF
 #define KXCJK1013_MAX_STARTUP_TIME_US	100000
 
 #define KXCJK1013_SLEEP_DELAY_MS	2000
 
+#define KXCJK1013_REG_INT_SRC1_BIT_TPS	BIT(0)	/* KXTF9 */
 #define KXCJK1013_REG_INT_SRC1_BIT_WUFS	BIT(1)
+#define KXCJK1013_REG_INT_SRC1_MASK_TDTS	(BIT(2) | BIT(3))	/* KXTF9 */
+#define KXCJK1013_REG_INT_SRC1_TAP_NONE		0
+#define KXCJK1013_REG_INT_SRC1_TAP_SINGLE		BIT(2)
+#define KXCJK1013_REG_INT_SRC1_TAP_DOUBLE		BIT(3)
 #define KXCJK1013_REG_INT_SRC1_BIT_DRDY	BIT(4)
 
+/* KXCJK: INT_SOURCE2: motion detect, KXTF9: INT_SRC_REG1: tap detect */
 #define KXCJK1013_REG_INT_SRC2_BIT_ZP	BIT(0)
 #define KXCJK1013_REG_INT_SRC2_BIT_ZN	BIT(1)
 #define KXCJK1013_REG_INT_SRC2_BIT_YP	BIT(2)
@@ -93,6 +130,7 @@ enum kx_chipset {
 	KXCJK1013,
 	KXCJ91008,
 	KXTJ21009,
+	KXTF9,
 	KX_MAX_CHIPS /* this must be last */
 };
 
@@ -158,6 +196,18 @@ static const struct kx_odr_map samp_freq_table[] = {
 static const char *const kxcjk1013_samp_freq_avail =
 	"0.781000 1.563000 3.125000 6.250000 12.500000 25 50 100 200 400 800 1600";
 
+static const struct kx_odr_map kxtf9_samp_freq_table[] = {
+	{ 25, 0, 0x01, 0x00 },
+	{ 50, 0, 0x02, 0x01 },
+	{ 100, 0, 0x03, 0x01 },
+	{ 200, 0, 0x04, 0x01 },
+	{ 400, 0, 0x05, 0x01 },
+	{ 800, 0, 0x06, 0x01 },
+};
+
+static const char *const kxtf9_samp_freq_avail =
+	"25 50 100 200 400 800";
+
 /* Refer to section 4 of the specification */
 static const struct {
 	int odr_bits;
@@ -208,6 +258,15 @@ static const struct {
 		{0x06, 3000},
 		{0x07, 2000},
 	},
+	/* KXTF9 */
+	{
+		{0x01, 81000},
+		{0x02, 41000},
+		{0x03, 21000},
+		{0x04, 11000},
+		{0x05, 5100},
+		{0x06, 2700},
+	},
 };
 
 static const struct {
@@ -404,7 +463,7 @@ static int kxcjk1013_set_power_state(struct kxcjk1013_data *data, bool on)
 
 static int kxcjk1013_chip_update_thresholds(struct kxcjk1013_data *data)
 {
-	int ret;
+	int waketh_reg, ret;
 
 	ret = i2c_smbus_write_byte_data(data->client,
 					KXCJK1013_REG_WAKE_TIMER,
@@ -415,8 +474,9 @@ static int kxcjk1013_chip_update_thresholds(struct kxcjk1013_data *data)
 		return ret;
 	}
 
-	ret = i2c_smbus_write_byte_data(data->client,
-					KXCJK1013_REG_WAKE_THRES,
+	waketh_reg = data->chipset == KXTF9 ?
+		KXTF9_REG_WAKE_THRESH : KXCJK1013_REG_WAKE_THRES;
+	ret = i2c_smbus_write_byte_data(data->client, waketh_reg,
 					data->wake_thres);
 	if (ret < 0) {
 		dev_err(&data->client->dev, "Error writing reg_wake_thres\n");
@@ -590,9 +650,14 @@ static int kxcjk1013_set_odr(struct kxcjk1013_data *data, int val, int val2)
 	if (ret < 0)
 		return ret;
 
-	odr_setting = kxcjk1013_find_odr_value(samp_freq_table,
-					       ARRAY_SIZE(samp_freq_table),
-					       val, val2);
+	if (data->chipset == KXTF9)
+		odr_setting = kxcjk1013_find_odr_value(kxtf9_samp_freq_table,
+						       ARRAY_SIZE(kxtf9_samp_freq_table),
+						       val, val2);
+	else
+		odr_setting = kxcjk1013_find_odr_value(samp_freq_table,
+						       ARRAY_SIZE(samp_freq_table),
+						       val, val2);
 
 	if (IS_ERR(odr_setting))
 		return PTR_ERR(odr_setting);
@@ -629,9 +694,14 @@ static int kxcjk1013_set_odr(struct kxcjk1013_data *data, int val, int val2)
 
 static int kxcjk1013_get_odr(struct kxcjk1013_data *data, int *val, int *val2)
 {
-	return kxcjk1013_convert_odr_value(samp_freq_table,
-					   ARRAY_SIZE(samp_freq_table),
-					   data->odr_bits, val, val2);
+	if (data->chipset == KXTF9)
+		return kxcjk1013_convert_odr_value(kxtf9_samp_freq_table,
+						   ARRAY_SIZE(kxtf9_samp_freq_table),
+						   data->odr_bits, val, val2);
+	else
+		return kxcjk1013_convert_odr_value(samp_freq_table,
+						   ARRAY_SIZE(samp_freq_table),
+						   data->odr_bits, val, val2);
 }
 
 static int kxcjk1013_get_acc_reg(struct kxcjk1013_data *data, int axis)
@@ -886,7 +956,16 @@ static ssize_t kxcjk1013_get_samp_freq_avail(struct device *dev,
 					     struct device_attribute *attr,
 					     char *buf)
 {
-	return sprintf(buf, "%s\n", kxcjk1013_samp_freq_avail);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct kxcjk1013_data *data = iio_priv(indio_dev);
+	const char *str;
+
+	if (data->chipset == KXTF9)
+		str = kxtf9_samp_freq_avail;
+	else
+		str = kxcjk1013_samp_freq_avail;
+
+	return sprintf(buf, "%s\n", str);
 }
 
 static IIO_DEVICE_ATTR(in_accel_sampling_frequency_available, S_IRUGO,
@@ -1119,7 +1198,16 @@ static irqreturn_t kxcjk1013_event_handler(int irq, void *private)
 	}
 
 	if (ret & KXCJK1013_REG_INT_SRC1_BIT_WUFS) {
-		kxcjk1013_report_motion_event(indio_dev);
+		if (data->chipset == KXTF9)
+			iio_push_event(indio_dev,
+				       IIO_MOD_EVENT_CODE(IIO_ACCEL,
+				       0,
+				       IIO_MOD_X_AND_Y_AND_Z,
+				       IIO_EV_TYPE_THRESH,
+				       IIO_EV_DIR_RISING),
+				       data->timestamp);
+		else
+			kxcjk1013_report_motion_event(indio_dev);
 	}
 
 ack_intr:
@@ -1412,6 +1500,7 @@ static const struct i2c_device_id kxcjk1013_id[] = {
 	{"kxcjk1013", KXCJK1013},
 	{"kxcj91008", KXCJ91008},
 	{"kxtj21009", KXTJ21009},
+	{"kxtf9",     KXTF9},
 	{"SMO8500",   KXCJ91008},
 	{}
 };