提交 14b24a88 编写于 作者: J Ji-Ze Hong (Peter Hong) 提交者: Wim Van Sebroeck

watchdog: f71808e_wdt: Add F81866 support

Adds watchdog enable support for Fintek F81866 Super-IO chip to
Fintek wdt driver (f71808e_wdt)

Tested and verified on iBASE MI802 Industrial PC

Datasheet references:
http://www.alldatasheet.com/datasheet-pdf/pdf/459085/FINTEK/F81866AD-I.htmlSuggested-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NJi-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
上级 b99c8774
......@@ -45,9 +45,11 @@
#define SIO_REG_DEVREV 0x22 /* Device revision */
#define SIO_REG_MANID 0x23 /* Fintek ID (2 bytes) */
#define SIO_REG_ROM_ADDR_SEL 0x27 /* ROM address select */
#define SIO_F81866_REG_PORT_SEL 0x27 /* F81866 Multi-Function Register */
#define SIO_REG_MFUNCT1 0x29 /* Multi function select 1 */
#define SIO_REG_MFUNCT2 0x2a /* Multi function select 2 */
#define SIO_REG_MFUNCT3 0x2b /* Multi function select 3 */
#define SIO_F81866_REG_GPIO1 0x2c /* F81866 GPIO1 Enable Register */
#define SIO_REG_ENABLE 0x30 /* Logical device enable */
#define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */
......@@ -60,6 +62,7 @@
#define SIO_F71882_ID 0x0541 /* Chipset ID */
#define SIO_F71889_ID 0x0723 /* Chipset ID */
#define SIO_F81865_ID 0x0704 /* Chipset ID */
#define SIO_F81866_ID 0x1010 /* Chipset ID */
#define F71808FG_REG_WDO_CONF 0xf0
#define F71808FG_REG_WDT_CONF 0xf5
......@@ -116,7 +119,8 @@ module_param(start_withtimeout, uint, 0);
MODULE_PARM_DESC(start_withtimeout, "Start watchdog timer on module load with"
" given initial timeout. Zero (default) disables this feature.");
enum chips { f71808fg, f71858fg, f71862fg, f71869, f71882fg, f71889fg, f81865 };
enum chips { f71808fg, f71858fg, f71862fg, f71869, f71882fg, f71889fg, f81865,
f81866};
static const char *f71808e_names[] = {
"f71808fg",
......@@ -126,6 +130,7 @@ static const char *f71808e_names[] = {
"f71882fg",
"f71889fg",
"f81865",
"f81866",
};
/* Super-I/O Function prototypes */
......@@ -370,6 +375,22 @@ static int watchdog_start(void)
superio_clear_bit(watchdog.sioaddr, SIO_REG_MFUNCT3, 5);
break;
case f81866:
/* Set pin 70 to WDTRST# */
superio_clear_bit(watchdog.sioaddr, SIO_F81866_REG_PORT_SEL,
BIT(3) | BIT(0));
superio_set_bit(watchdog.sioaddr, SIO_F81866_REG_PORT_SEL,
BIT(2));
/*
* GPIO1 Control Register when 27h BIT3:2 = 01 & BIT0 = 0.
* The PIN 70(GPIO15/WDTRST) is controlled by 2Ch:
* BIT5: 0 -> WDTRST#
* 1 -> GPIO15
*/
superio_clear_bit(watchdog.sioaddr, SIO_F81866_REG_GPIO1,
BIT(5));
break;
default:
/*
* 'default' label to shut up the compiler and catch
......@@ -382,7 +403,7 @@ static int watchdog_start(void)
superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
superio_set_bit(watchdog.sioaddr, SIO_REG_ENABLE, 0);
if (watchdog.type == f81865)
if (watchdog.type == f81865 || watchdog.type == f81866)
superio_set_bit(watchdog.sioaddr, F81865_REG_WDO_CONF,
F81865_FLAG_WDOUT_EN);
else
......@@ -788,6 +809,9 @@ static int __init f71808e_find(int sioaddr)
case SIO_F81865_ID:
watchdog.type = f81865;
break;
case SIO_F81866_ID:
watchdog.type = f81866;
break;
default:
pr_info("Unrecognized Fintek device: %04x\n",
(unsigned int)devid);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册