driver: net: xgene: Add support for 2nd 10GbE port

Adding support for the second 10GbE port on APM X-Gene SoC
Signed-off-by: NIyappan Subramanian <isubramanian@apm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/apm/xgene/xgene_enet_hw.c

@@ -107,7 +107,8 @@ static void xgene_enet_set_ring_state(struct xgene_enet_desc_ring *ring)
 {
 	xgene_enet_ring_set_type(ring);
 
-	if (xgene_enet_ring_owner(ring->id) == RING_OWNER_ETH0)
+	if (xgene_enet_ring_owner(ring->id) == RING_OWNER_ETH0 ||
+	    xgene_enet_ring_owner(ring->id) == RING_OWNER_ETH1)
 		xgene_enet_ring_set_recombbuf(ring);
 
 	xgene_enet_ring_init(ring);

drivers/net/ethernet/apm/xgene/xgene_enet_main.c

@@ -1305,10 +1305,17 @@ static void xgene_enet_setup_ops(struct xgene_enet_pdata *pdata)
 			pdata->ring_num = START_RING_NUM_0;
 			break;
 		case 1:
-			pdata->cpu_bufnum = START_CPU_BUFNUM_1;
-			pdata->eth_bufnum = START_ETH_BUFNUM_1;
-			pdata->bp_bufnum = START_BP_BUFNUM_1;
-			pdata->ring_num = START_RING_NUM_1;
+			if (pdata->phy_mode == PHY_INTERFACE_MODE_XGMII) {
+				pdata->cpu_bufnum = XG_START_CPU_BUFNUM_1;
+				pdata->eth_bufnum = XG_START_ETH_BUFNUM_1;
+				pdata->bp_bufnum = XG_START_BP_BUFNUM_1;
+				pdata->ring_num = XG_START_RING_NUM_1;
+			} else {
+				pdata->cpu_bufnum = START_CPU_BUFNUM_1;
+				pdata->eth_bufnum = START_ETH_BUFNUM_1;
+				pdata->bp_bufnum = START_BP_BUFNUM_1;
+				pdata->ring_num = START_RING_NUM_1;
+			}
 			break;
 		default:
 			break;
@@ -1478,6 +1485,7 @@ static const struct acpi_device_id xgene_enet_acpi_match[] = {
 	{ "APMC0D05", XGENE_ENET1},
 	{ "APMC0D30", XGENE_ENET1},
 	{ "APMC0D31", XGENE_ENET1},
+	{ "APMC0D3F", XGENE_ENET1},
 	{ "APMC0D26", XGENE_ENET2},
 	{ "APMC0D25", XGENE_ENET2},
 	{ }

drivers/net/ethernet/apm/xgene/xgene_enet_main.h

@@ -56,6 +56,11 @@
 #define START_BP_BUFNUM_1	0x2A
 #define START_RING_NUM_1	264
 
+#define XG_START_CPU_BUFNUM_1	12
+#define XG_START_ETH_BUFNUM_1	2
+#define XG_START_BP_BUFNUM_1	0x22
+#define XG_START_RING_NUM_1	264
+
 #define X2_START_CPU_BUFNUM_0	0
 #define X2_START_ETH_BUFNUM_0	0
 #define X2_START_BP_BUFNUM_0	0x20