ARM: replace BSYM() with badr assembly macro

BSYM() was invented to allow us to work around a problem with the
assembler, where local symbols resolved by the assembler for the 'adr'
instruction did not take account of their ISA.

Since we don't want BSYM() used elsewhere, replace BSYM() with a new
macro 'badr', which is like the 'adr' pseudo-op, but with the BSYM()
mechanics integrated into it.  This ensures that the BSYM()-ification
is only used in conjunction with 'adr'.
Acked-by: NDave Martin <Dave.Martin@arm.com>
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

arch/arm/boot/compressed/head.S

@@ -130,7 +130,7 @@ start:
 		.endr
    ARM(		mov	r0, r0		)
    ARM(		b	1f		)
- THUMB(		adr	r12, BSYM(1f)	)
+ THUMB(		badr	r12, 1f		)
  THUMB(		bx	r12		)
 
 		.word	_magic_sig	@ Magic numbers to help the loader
@@ -447,7 +447,7 @@ dtb_check_done:
 
 		bl	cache_clean_flush
 
-		adr	r0, BSYM(restart)
+		badr	r0, restart
 		add	r0, r0, r6
 		mov	pc, r0
 

arch/arm/common/mcpm_head.S

@@ -49,7 +49,7 @@
 ENTRY(mcpm_entry_point)
 
  ARM_BE8(setend        be)
- THUMB(	adr	r12, BSYM(1f)	)
+ THUMB(	badr	r12, 1f		)
  THUMB(	bx	r12		)
  THUMB(	.thumb			)
 1:

arch/arm/include/asm/assembler.h

@@ -177,6 +177,21 @@
 	restore_irqs_notrace \oldcpsr
 	.endm
 
+/*
+ * Assembly version of "adr rd, BSYM(sym)".  This should only be used to
+ * reference local symbols in the same assembly file which are to be
+ * resolved by the assembler.  Other usage is undefined.
+ */
+	.irp	c,,eq,ne,cs,cc,mi,pl,vs,vc,hi,ls,ge,lt,gt,le,hs,lo
+	.macro	badr\c, rd, sym
+#ifdef CONFIG_THUMB2_KERNEL
+	adr\c	\rd, \sym + 1
+#else
+	adr\c	\rd, \sym
+#endif
+	.endm
+	.endr
+
 /*
  * Get current thread_info.
  */
@@ -326,7 +341,7 @@
 THUMB(	orr	\reg , \reg , #PSR_T_BIT	)
 	bne	1f
 	orr	\reg, \reg, #PSR_A_BIT
-	adr	lr, BSYM(2f)
+	badr	lr, 2f
 	msr	spsr_cxsf, \reg
 	__MSR_ELR_HYP(14)
 	__ERET

arch/arm/include/asm/entry-macro-multi.S

@@ -10,7 +10,7 @@
 	@
 	@ routine called with r0 = irq number, r1 = struct pt_regs *
 	@
-	adrne	lr, BSYM(1b)
+	badrne	lr, 1b
 	bne	asm_do_IRQ
 
 #ifdef CONFIG_SMP
@@ -23,7 +23,7 @@
 	ALT_SMP(test_for_ipi r0, r2, r6, lr)
 	ALT_UP_B(9997f)
 	movne	r1, sp
-	adrne	lr, BSYM(1b)
+	badrne	lr, 1b
 	bne	do_IPI
 #endif
 9997:

arch/arm/include/asm/unified.h

@@ -45,7 +45,6 @@
 #define THUMB(x...)	x
 #ifdef __ASSEMBLY__
 #define W(instr)	instr.w
-#define BSYM(sym)	sym + 1
 #else
 #define WASM(instr)	#instr ".w"
 #endif
@@ -59,7 +58,6 @@
 #define THUMB(x...)
 #ifdef __ASSEMBLY__
 #define W(instr)	instr
-#define BSYM(sym)	sym
 #else
 #define WASM(instr)	#instr
 #endif

arch/arm/kernel/entry-armv.S

@@ -40,7 +40,7 @@
 #ifdef CONFIG_MULTI_IRQ_HANDLER
 	ldr	r1, =handle_arch_irq
 	mov	r0, sp
-	adr	lr, BSYM(9997f)
+	badr	lr, 9997f
 	ldr	pc, [r1]
 #else
 	arch_irq_handler_default
@@ -273,7 +273,7 @@ __und_svc:
 	str	r4, [sp, #S_PC]
 	orr	r0, r9, r0, lsl #16
 #endif
-	adr	r9, BSYM(__und_svc_finish)
+	badr	r9, __und_svc_finish
 	mov	r2, r4
 	bl	call_fpe
 
@@ -469,7 +469,7 @@ __und_usr:
 	@ instruction, or the more conventional lr if we are to treat
 	@ this as a real undefined instruction
 	@
-	adr	r9, BSYM(ret_from_exception)
+	badr	r9, ret_from_exception
 
 	@ IRQs must be enabled before attempting to read the instruction from
 	@ user space since that could cause a page/translation fault if the
@@ -486,7 +486,7 @@ __und_usr:
 	@ r2 = PC value for the following instruction (:= regs->ARM_pc)
 	@ r4 = PC value for the faulting instruction
 	@ lr = 32-bit undefined instruction function
-	adr	lr, BSYM(__und_usr_fault_32)
+	badr	lr, __und_usr_fault_32
 	b	call_fpe
 
 __und_usr_thumb:
@@ -522,7 +522,7 @@ ARM_BE8(rev16	r0, r0)				@ little endian instruction
 	add	r2, r2, #2			@ r2 is PC + 2, make it PC + 4
 	str	r2, [sp, #S_PC]			@ it's a 2x16bit instr, update
 	orr	r0, r0, r5, lsl #16
-	adr	lr, BSYM(__und_usr_fault_32)
+	badr	lr, __und_usr_fault_32
 	@ r0 = the two 16-bit Thumb instructions which caused the exception
 	@ r2 = PC value for the following Thumb instruction (:= regs->ARM_pc)
 	@ r4 = PC value for the first 16-bit Thumb instruction
@@ -716,7 +716,7 @@ __und_usr_fault_32:
 __und_usr_fault_16:
 	mov	r1, #2
 1:	mov	r0, sp
-	adr	lr, BSYM(ret_from_exception)
+	badr	lr, ret_from_exception
 	b	__und_fault
 ENDPROC(__und_usr_fault_32)
 ENDPROC(__und_usr_fault_16)

arch/arm/kernel/entry-common.S

@@ -88,7 +88,7 @@ ENTRY(ret_from_fork)
 	bl	schedule_tail
 	cmp	r5, #0
 	movne	r0, r4
-	adrne	lr, BSYM(1f)
+	badrne	lr, 1f
 	retne	r5
 1:	get_thread_info tsk
 	b	ret_slow_syscall
@@ -196,7 +196,7 @@ local_restart:
 	bne	__sys_trace
 
 	cmp	scno, #NR_syscalls		@ check upper syscall limit
-	adr	lr, BSYM(ret_fast_syscall)	@ return address
+	badr	lr, ret_fast_syscall		@ return address
 	ldrcc	pc, [tbl, scno, lsl #2]		@ call sys_* routine
 
 	add	r1, sp, #S_OFF
@@ -231,7 +231,7 @@ __sys_trace:
 	add	r0, sp, #S_OFF
 	bl	syscall_trace_enter
 
-	adr	lr, BSYM(__sys_trace_return)	@ return address
+	badr	lr, __sys_trace_return		@ return address
 	mov	scno, r0			@ syscall number (possibly new)
 	add	r1, sp, #S_R0 + S_OFF		@ pointer to regs
 	cmp	scno, #NR_syscalls		@ check upper syscall limit

arch/arm/kernel/entry-ftrace.S

@@ -87,7 +87,7 @@
 
 1: 	mcount_get_lr	r1			@ lr of instrumented func
 	mcount_adjust_addr	r0, lr		@ instrumented function
-	adr	lr, BSYM(2f)
+	badr	lr, 2f
 	mov	pc, r2
 2:	mcount_exit
 .endm

arch/arm/kernel/head-nommu.S

@@ -46,7 +46,7 @@ ENTRY(stext)
 	.arm
 ENTRY(stext)
 
- THUMB(	adr	r9, BSYM(1f)	)	@ Kernel is always entered in ARM.
+ THUMB(	badr	r9, 1f		)	@ Kernel is always entered in ARM.
  THUMB(	bx	r9		)	@ If this is a Thumb-2 kernel,
  THUMB(	.thumb			)	@ switch to Thumb now.
  THUMB(1:			)
@@ -79,7 +79,7 @@ ENTRY(stext)
 #endif
 	ldr	r13, =__mmap_switched		@ address to jump to after
 						@ initialising sctlr
-	adr	lr, BSYM(1f)			@ return (PIC) address
+	badr	lr, 1f				@ return (PIC) address
 	ldr	r12, [r10, #PROCINFO_INITFUNC]
 	add	r12, r12, r10
 	ret	r12
@@ -115,7 +115,7 @@ ENTRY(secondary_startup)
 	bl      __setup_mpu			@ Initialize the MPU
 #endif
 
-	adr	lr, BSYM(__after_proc_init)	@ return address
+	badr	lr, __after_proc_init		@ return address
 	mov	r13, r12			@ __secondary_switched address
 	ldr	r12, [r10, #PROCINFO_INITFUNC]
 	add	r12, r12, r10

arch/arm/kernel/head.S

@@ -80,7 +80,7 @@
 ENTRY(stext)
  ARM_BE8(setend	be )			@ ensure we are in BE8 mode
 
- THUMB(	adr	r9, BSYM(1f)	)	@ Kernel is always entered in ARM.
+ THUMB(	badr	r9, 1f		)	@ Kernel is always entered in ARM.
  THUMB(	bx	r9		)	@ If this is a Thumb-2 kernel,
  THUMB(	.thumb			)	@ switch to Thumb now.
  THUMB(1:			)
@@ -136,7 +136,7 @@ ENTRY(stext)
 	 */
 	ldr	r13, =__mmap_switched		@ address to jump to after
 						@ mmu has been enabled
-	adr	lr, BSYM(1f)			@ return (PIC) address
+	badr	lr, 1f				@ return (PIC) address
 	mov	r8, r4				@ set TTBR1 to swapper_pg_dir
 	ldr	r12, [r10, #PROCINFO_INITFUNC]
 	add	r12, r12, r10
@@ -348,7 +348,7 @@ __turn_mmu_on_loc:
 	.text
 ENTRY(secondary_startup_arm)
 	.arm
- THUMB(	adr	r9, BSYM(1f)	)	@ Kernel is entered in ARM.
+ THUMB(	badr	r9, 1f		)	@ Kernel is entered in ARM.
  THUMB(	bx	r9		)	@ If this is a Thumb-2 kernel,
  THUMB(	.thumb			)	@ switch to Thumb now.
  THUMB(1:			)
@@ -384,7 +384,7 @@ ENTRY(secondary_startup)
 	ldr	r4, [r7, lr]			@ get secondary_data.pgdir
 	add	r7, r7, #4
 	ldr	r8, [r7, lr]			@ get secondary_data.swapper_pg_dir
-	adr	lr, BSYM(__enable_mmu)		@ return address
+	badr	lr, __enable_mmu		@ return address
 	mov	r13, r12			@ __secondary_switched address
 	ldr	r12, [r10, #PROCINFO_INITFUNC]
 	add	r12, r12, r10			@ initialise processor

arch/arm/kernel/sleep.S

@@ -81,7 +81,7 @@ ENTRY(__cpu_suspend)
 	mov	r1, r4			@ size of save block
 	add	r0, sp, #8		@ pointer to save block
 	bl	__cpu_suspend_save
-	adr	lr, BSYM(cpu_suspend_abort)
+	badr	lr, cpu_suspend_abort
 	ldmfd	sp!, {r0, pc}		@ call suspend fn
 ENDPROC(__cpu_suspend)
 	.ltorg

arch/arm/lib/call_with_stack.S

@@ -35,7 +35,7 @@ ENTRY(call_with_stack)
 	mov	r2, r0
 	mov	r0, r1
 
-	adr	lr, BSYM(1f)
+	badr	lr, 1f
 	ret	r2
 
 1:	ldr	lr, [sp]

arch/arm/mm/proc-v7m.S

@@ -98,7 +98,7 @@ __v7m_setup:
 	str	r5, [r0, V7M_SCB_SHPR3]	@ set PendSV priority
 
 	@ SVC to run the kernel in this mode
-	adr	r1, BSYM(1f)
+	badr	r1, 1f
 	ldr	r5, [r12, #11 * 4]	@ read the SVC vector entry
 	str	r1, [r12, #11 * 4]	@ write the temporary SVC vector entry
 	mov	r6, lr			@ save LR