ARM: ixp4xx: use __iomem pointers for MMIO

ARM is moving to stricter checks on readl/write functions,
so we need to use the correct types everywhere.

At the moment, this patch conflicts with other patches in linux-next,
need to sort this out.

Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

arch/arm/mach-ixp4xx/common.c

@@ -53,24 +53,24 @@ static struct clock_event_device clockevent_ixp4xx;
  *************************************************************************/
 static struct map_desc ixp4xx_io_desc[] __initdata = {
 	{	/* UART, Interrupt ctrl, GPIO, timers, NPEs, MACs, USB .... */
-		.virtual	= IXP4XX_PERIPHERAL_BASE_VIRT,
+		.virtual	= (unsigned long)IXP4XX_PERIPHERAL_BASE_VIRT,
 		.pfn		= __phys_to_pfn(IXP4XX_PERIPHERAL_BASE_PHYS),
 		.length		= IXP4XX_PERIPHERAL_REGION_SIZE,
 		.type		= MT_DEVICE
 	}, {	/* Expansion Bus Config Registers */
-		.virtual	= IXP4XX_EXP_CFG_BASE_VIRT,
+		.virtual	= (unsigned long)IXP4XX_EXP_CFG_BASE_VIRT,
 		.pfn		= __phys_to_pfn(IXP4XX_EXP_CFG_BASE_PHYS),
 		.length		= IXP4XX_EXP_CFG_REGION_SIZE,
 		.type		= MT_DEVICE
 	}, {	/* PCI Registers */
-		.virtual	= IXP4XX_PCI_CFG_BASE_VIRT,
+		.virtual	= (unsigned long)IXP4XX_PCI_CFG_BASE_VIRT,
 		.pfn		= __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS),
 		.length		= IXP4XX_PCI_CFG_REGION_SIZE,
 		.type		= MT_DEVICE
 	},
 #ifdef CONFIG_DEBUG_LL
 	{	/* Debug UART mapping */
-		.virtual	= IXP4XX_DEBUG_UART_BASE_VIRT,
+		.virtual	= (unsigned long)IXP4XX_DEBUG_UART_BASE_VIRT,
 		.pfn		= __phys_to_pfn(IXP4XX_DEBUG_UART_BASE_PHYS),
 		.length		= IXP4XX_DEBUG_UART_REGION_SIZE,
 		.type		= MT_DEVICE

arch/arm/mach-ixp4xx/include/mach/cpu.h

@@ -14,6 +14,7 @@
 #ifndef __ASM_ARCH_CPU_H__
 #define __ASM_ARCH_CPU_H__
 
+#include <linux/io.h>
 #include <asm/cputype.h>
 
 /* Processor id value in CP15 Register 0 */
@@ -37,7 +38,7 @@
 
 static inline u32 ixp4xx_read_feature_bits(void)
 {
-	u32 val = ~*IXP4XX_EXP_CFG2;
+	u32 val = ~__raw_readl(IXP4XX_EXP_CFG2);
 
 	if (cpu_is_ixp42x_rev_a0())
 		return IXP42X_FEATURE_MASK & ~(IXP4XX_FEATURE_RCOMP |
@@ -51,7 +52,7 @@ static inline u32 ixp4xx_read_feature_bits(void)
 
 static inline void ixp4xx_write_feature_bits(u32 value)
 {
-	*IXP4XX_EXP_CFG2 = ~value;
+	__raw_writel(~value, IXP4XX_EXP_CFG2);
 }
 
 #endif  /* _ASM_ARCH_CPU_H */

arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h

@@ -49,21 +49,21 @@
  * Expansion BUS Configuration registers
  */
 #define IXP4XX_EXP_CFG_BASE_PHYS	(0xC4000000)
-#define IXP4XX_EXP_CFG_BASE_VIRT	(0xFFBFE000)
+#define IXP4XX_EXP_CFG_BASE_VIRT	IOMEM(0xFFBFE000)
 #define IXP4XX_EXP_CFG_REGION_SIZE	(0x00001000)
 
 /*
  * PCI Config registers
  */
 #define IXP4XX_PCI_CFG_BASE_PHYS	(0xC0000000)
-#define	IXP4XX_PCI_CFG_BASE_VIRT	(0xFFBFF000)
+#define	IXP4XX_PCI_CFG_BASE_VIRT	IOMEM(0xFFBFF000)
 #define IXP4XX_PCI_CFG_REGION_SIZE	(0x00001000)
 
 /*
  * Peripheral space
  */
 #define IXP4XX_PERIPHERAL_BASE_PHYS	(0xC8000000)
-#define IXP4XX_PERIPHERAL_BASE_VIRT	(0xFFBEB000)
+#define IXP4XX_PERIPHERAL_BASE_VIRT	IOMEM(0xFFBEB000)
 #define IXP4XX_PERIPHERAL_REGION_SIZE	(0x00013000)
 
 /*
@@ -73,7 +73,7 @@
  * aligned so that it * can be used with the low-level debug code.
  */
 #define	IXP4XX_DEBUG_UART_BASE_PHYS	(0xC8000000)
-#define	IXP4XX_DEBUG_UART_BASE_VIRT	(0xffb00000)
+#define	IXP4XX_DEBUG_UART_BASE_VIRT	IOMEM(0xffb00000)
 #define	IXP4XX_DEBUG_UART_REGION_SIZE	(0x00001000)
 
 #define IXP4XX_EXP_CS0_OFFSET	0x00
@@ -92,7 +92,7 @@
 /*
  * Expansion Bus Controller registers.
  */
-#define IXP4XX_EXP_REG(x) ((volatile u32 *)(IXP4XX_EXP_CFG_BASE_VIRT+(x)))
+#define IXP4XX_EXP_REG(x) ((volatile u32 __iomem *)(IXP4XX_EXP_CFG_BASE_VIRT+(x)))
 
 #define IXP4XX_EXP_CS0      IXP4XX_EXP_REG(IXP4XX_EXP_CS0_OFFSET)
 #define IXP4XX_EXP_CS1      IXP4XX_EXP_REG(IXP4XX_EXP_CS1_OFFSET)