提交 13e793da 编写于 作者: M Mathias Nyman 提交者: Greg Kroah-Hartman

xhci: Fix USB 3.1 capability detection on early xHCI 1.1 spec based hosts

commit 47f50d61076523e1a0d5a070062c2311320eeca8 upstream.

Early xHCI 1.1 spec did not mention USB 3.1 capable hosts should set
sbrn to 0x31, or that the minor revision is a two digit BCD
containing minor and sub-minor numbers.
This was later clarified in xHCI 1.2.

Some USB 3.1 capable hosts therefore have sbrn set to 0x30, or minor
revision set to 0x1 instead of 0x10.

Detect the USB 3.1 capability correctly for these hosts as well

Fixes: ddd57980a0fd ("xhci: detect USB 3.2 capable host controllers correctly")
Cc: <stable@vger.kernel.org> # v4.18+
Cc: Loïc Yhuel <loic.yhuel@gmail.com>
Signed-off-by: NMathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/1570190373-30684-5-git-send-email-mathias.nyman@linux.intel.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
上级 d6bdd468
......@@ -5036,11 +5036,18 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
hcd->has_tt = 1;
} else {
/*
* Some 3.1 hosts return sbrn 0x30, use xhci supported protocol
* minor revision instead of sbrn. Minor revision is a two digit
* BCD containing minor and sub-minor numbers, only show minor.
* Early xHCI 1.1 spec did not mention USB 3.1 capable hosts
* should return 0x31 for sbrn, or that the minor revision
* is a two digit BCD containig minor and sub-minor numbers.
* This was later clarified in xHCI 1.2.
*
* Some USB 3.1 capable hosts therefore have sbrn 0x30, and
* minor revision set to 0x1 instead of 0x10.
*/
minor_rev = xhci->usb3_rhub.min_rev / 0x10;
if (xhci->usb3_rhub.min_rev == 0x1)
minor_rev = 1;
else
minor_rev = xhci->usb3_rhub.min_rev / 0x10;
switch (minor_rev) {
case 2:
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册