Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
接近 2 年 前同步成功

通知 169
Star 36
Fork 7
cloud-kernel
cloud-kernel
提交 13ccb93f 编写于 作者: T Tejun Heo
浏览文件
操作

Merge branch 'driver-core-linus' into driver-core-next 

a8b14744 ("sysfs: give different locking key to regular and bin
files") in driver-core-linus modifies sysfs_open_file() so that it
gives out different locking classes to sysfs_open_files depending on
whether the file is bin or not.  Due to the massive kernfs
reorganization in driver-core-next, this naturally causes merge
conflict in fs/sysfs/file.c.

Due to the way things are split between kernfs and sysfs in
driver-core-next, the same fix can't easily be applied to
driver-core-next.  This merge simply ignores the offending commit.  A
following patch will implement a separate fix for the issue.
Signed-off-by: NTejun Heo <tj@kernel.org>
上级 bbc780f8 a8b14744
展开全部 隐藏空白更改
内联 并排
Showing with 2461 addition and 1339 deletion
Documentation/devicetree/bindings/arm/omap/mpu.txt
浏览文件 @ 13ccb93f
......@@ -7,10 +7,18 @@ The MPU contain CPUs, GIC, L2 cache and a local PRCM.
Required properties:
- compatible : Should be "ti,omap3-mpu" for OMAP3
Should be "ti,omap4-mpu" for OMAP4
Should be "ti,omap5-mpu" for OMAP5
- ti,hwmods: "mpu"
Examples:
- For an OMAP5 SMP system:
mpu {
compatible = "ti,omap5-mpu";
ti,hwmods = "mpu"
};
- For an OMAP4 SMP system:
mpu {
......
Documentation/devicetree/bindings/arm/pmu.txt
浏览文件 @ 13ccb93f
......@@ -7,6 +7,7 @@ representation in the device tree should be done as under:-
Required properties:
- compatible : should be one of
"arm,armv8-pmuv3"
"arm,cortex-a15-pmu"
"arm,cortex-a9-pmu"
"arm,cortex-a8-pmu"
......
Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
浏览文件 @ 13ccb93f
......@@ -49,7 +49,7 @@ adc@12D10000 {
/* NTC thermistor is a hwmon device */
ncp15wb473@0 {
compatible = "ntc,ncp15wb473";
pullup-uV = <1800000>;
pullup-uv = <1800000>;
pullup-ohm = <47000>;
pulldown-ohm = <0>;
io-channels = <&adc 4>;
......
Documentation/devicetree/bindings/clock/exynos4-clock.txt
浏览文件 @ 13ccb93f
......@@ -6,7 +6,7 @@ SoC's in the Exynos4 family.
Required Properties:
- comptible: should be one of the following.
- compatible: should be one of the following.
- "samsung,exynos4210-clock" - controller compatible with Exynos4210 SoC.
- "samsung,exynos4412-clock" - controller compatible with Exynos4412 SoC.
......
Documentation/devicetree/bindings/clock/exynos5250-clock.txt
浏览文件 @ 13ccb93f
......@@ -5,7 +5,7 @@ controllers within the Exynos5250 SoC.
Required Properties:
- comptible: should be one of the following.
- compatible: should be one of the following.
- "samsung,exynos5250-clock" - controller compatible with Exynos5250 SoC.
- reg: physical base address of the controller and length of memory mapped
......
Documentation/devicetree/bindings/clock/exynos5420-clock.txt
浏览文件 @ 13ccb93f
......@@ -5,7 +5,7 @@ controllers within the Exynos5420 SoC.
Required Properties:
- comptible: should be one of the following.
- compatible: should be one of the following.
- "samsung,exynos5420-clock" - controller compatible with Exynos5420 SoC.
- reg: physical base address of the controller and length of memory mapped
......
Documentation/devicetree/bindings/clock/exynos5440-clock.txt
浏览文件 @ 13ccb93f
......@@ -5,7 +5,7 @@ controllers within the Exynos5440 SoC.
Required Properties:
- comptible: should be "samsung,exynos5440-clock".
- compatible: should be "samsung,exynos5440-clock".
- reg: physical base address of the controller and length of memory mapped
region.
......
Documentation/devicetree/bindings/gpio/8xxx_gpio.txt
浏览文件 @ 13ccb93f
......@@ -5,16 +5,42 @@ This is for the non-QE/CPM/GUTs GPIO controllers as found on
Every GPIO controller node must have #gpio-cells property defined,
this information will be used to translate gpio-specifiers.
See bindings/gpio/gpio.txt for details of how to specify GPIO
information for devices.
The GPIO module usually is connected to the SoC's internal interrupt
controller, see bindings/interrupt-controller/interrupts.txt (the
interrupt client nodes section) for details how to specify this GPIO
module's interrupt.
The GPIO module may serve as another interrupt controller (cascaded to
the SoC's internal interrupt controller). See the interrupt controller
nodes section in bindings/interrupt-controller/interrupts.txt for
details.
Required properties:
- compatible : "fsl,<CHIP>-gpio" followed by "fsl,mpc8349-gpio" for
83xx, "fsl,mpc8572-gpio" for 85xx and "fsl,mpc8610-gpio" for 86xx.
- #gpio-cells : Should be two. The first cell is the pin number and the
second cell is used to specify optional parameters (currently unused).
- interrupts : Interrupt mapping for GPIO IRQ.
- interrupt-parent : Phandle for the interrupt controller that
services interrupts for this device.
- gpio-controller : Marks the port as GPIO controller.
- compatible: "fsl,<chip>-gpio" followed by "fsl,mpc8349-gpio"
for 83xx, "fsl,mpc8572-gpio" for 85xx, or
"fsl,mpc8610-gpio" for 86xx.
- #gpio-cells: Should be two. The first cell is the pin number
and the second cell is used to specify optional
parameters (currently unused).
- interrupt-parent: Phandle for the interrupt controller that
services interrupts for this device.
- interrupts: Interrupt mapping for GPIO IRQ.
- gpio-controller: Marks the port as GPIO controller.
Optional properties:
- interrupt-controller: Empty boolean property which marks the GPIO
module as an IRQ controller.
- #interrupt-cells: Should be two. Defines the number of integer
cells required to specify an interrupt within
this interrupt controller. The first cell
defines the pin number, the second cell
defines additional flags (trigger type,
trigger polarity). Note that the available
set of trigger conditions supported by the
GPIO module depends on the actual SoC.
Example of gpio-controller nodes for a MPC8347 SoC:
......@@ -22,39 +48,27 @@ Example of gpio-controller nodes for a MPC8347 SoC:
#gpio-cells = <2>;
compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
reg = <0xc00 0x100>;
interrupts = <74 0x8>;
interrupt-parent = <&ipic>;
interrupts = <74 0x8>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio-controller@d00 {
#gpio-cells = <2>;
compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
reg = <0xd00 0x100>;
interrupts = <75 0x8>;
interrupt-parent = <&ipic>;
interrupts = <75 0x8>;
gpio-controller;
};
See booting-without-of.txt for details of how to specify GPIO
information for devices.
To use GPIO pins as interrupt sources for peripherals, specify the
GPIO controller as the interrupt parent and define GPIO number +
trigger mode using the interrupts property, which is defined like
this:
interrupts = <number trigger>, where:
- number: GPIO pin (0..31)
- trigger: trigger mode:
2 = trigger on falling edge
3 = trigger on both edges
Example of device using this is:
Example of a peripheral using the GPIO module as an IRQ controller:
funkyfpga@0 {
compatible = "funky-fpga";
...
interrupts = <4 3>;
interrupt-parent = <&gpio1>;
interrupts = <4 3>;
};
Documentation/devicetree/bindings/mmc/ti-omap.txt 0 → 100644
浏览文件 @ 13ccb93f
* TI MMC host controller for OMAP1 and 2420
The MMC Host Controller on TI OMAP1 and 2420 family provides
an interface for MMC, SD, and SDIO types of memory cards.
This file documents differences between the core properties described
by mmc.txt and the properties used by the omap mmc driver.
Note that this driver will not work with omap2430 or later omaps,
please see the omap hsmmc driver for the current omaps.
Required properties:
- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers
- ti,hwmods: For 2420, must be "msdi<n>", where n is controller
instance starting 1
Examples:
msdi1: mmc@4809c000 {
compatible = "ti,omap2420-mmc";
ti,hwmods = "msdi1";
reg = <0x4809c000 0x80>;
interrupts = <83>;
dmas = <&sdma 61 &sdma 62>;
dma-names = "tx", "rx";
};
* TI MMC host controller for OMAP1 and 2420
The MMC Host Controller on TI OMAP1 and 2420 family provides
an interface for MMC, SD, and SDIO types of memory cards.
This file documents differences between the core properties described
by mmc.txt and the properties used by the omap mmc driver.
Note that this driver will not work with omap2430 or later omaps,
please see the omap hsmmc driver for the current omaps.
Required properties:
- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers
- ti,hwmods: For 2420, must be "msdi<n>", where n is controller
instance starting 1
Examples:
msdi1: mmc@4809c000 {
compatible = "ti,omap2420-mmc";
ti,hwmods = "msdi1";
reg = <0x4809c000 0x80>;
interrupts = <83>;
dmas = <&sdma 61 &sdma 62>;
dma-names = "tx", "rx";
};
Documentation/devicetree/bindings/net/fsl-fec.txt
浏览文件 @ 13ccb93f
......@@ -15,6 +15,7 @@ Optional properties:
only if property "phy-reset-gpios" is available. Missing the property
will have the duration be 1 millisecond. Numbers greater than 1000 are
invalid and 1 millisecond will be used instead.
- phy-supply: regulator that powers the Ethernet PHY.
Example:
......@@ -25,4 +26,5 @@ ethernet@83fec000 {
phy-mode = "mii";
phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */
local-mac-address = [00 04 9F 01 1B B9];
phy-supply = <&reg_fec_supply>;
};
Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt 已删除 100644 → 0
浏览文件 @ bbc780f8
NVIDIA Tegra 2 SPI device
Required properties:
- compatible : should be "nvidia,tegra20-spi".
- gpios : should specify GPIOs used for chipselect.
Documentation/devicetree/bindings/vendor-prefixes.txt
浏览文件 @ 13ccb93f
......@@ -32,12 +32,14 @@ est ESTeem Wireless Modems
fsl Freescale Semiconductor
GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc.
gef GE Fanuc Intelligent Platforms Embedded Systems, Inc.
gmt Global Mixed-mode Technology, Inc.
hisilicon Hisilicon Limited.
hp Hewlett Packard
ibm International Business Machines (IBM)
idt Integrated Device Technologies, Inc.
img Imagination Technologies Ltd.
intercontrol Inter Control Group
lg LG Corporation
linux Linux-specific binding
lsi LSI Corp. (LSI Logic)
marvell Marvell Technology Group Ltd.
......
Documentation/gpio/00-INDEX 0 → 100644
浏览文件 @ 13ccb93f
00-INDEX
- This file
gpio.txt
- Introduction to GPIOs and their kernel interfaces
consumer.txt
- How to obtain and use GPIOs in a driver
driver.txt
- How to write a GPIO driver
board.txt
- How to assign GPIOs to a consumer device and a function
sysfs.txt
- Information about the GPIO sysfs interface
gpio-legacy.txt
- Historical documentation of the deprecated GPIO integer interface
MAINTAINERS
浏览文件 @ 13ccb93f
......@@ -1934,7 +1934,8 @@ S: Maintained
F: drivers/gpio/gpio-bt8xx.c
BTRFS FILE SYSTEM
M: Chris Mason <chris.mason@fusionio.com>
M: Chris Mason <clm@fb.com>
M: Josef Bacik <jbacik@fb.com>
L: linux-btrfs@vger.kernel.org
W: http://btrfs.wiki.kernel.org/
Q: http://patchwork.kernel.org/project/linux-btrfs/list/
......@@ -4049,6 +4050,12 @@ W: http://www.pharscape.org
S: Maintained
F: drivers/net/usb/hso.c
HSR NETWORK PROTOCOL
M: Arvid Brodin <arvid.brodin@alten.se>
L: netdev@vger.kernel.org
S: Maintained
F: net/hsr/
HTCPEN TOUCHSCREEN DRIVER
M: Pau Oliva Fora <pof@eslack.org>
L: linux-input@vger.kernel.org
......@@ -5261,7 +5268,7 @@ S: Maintained
F: Documentation/lockdep*.txt
F: Documentation/lockstat.txt
F: include/linux/lockdep.h
F: kernel/lockdep*
F: kernel/locking/
LOGICAL DISK MANAGER SUPPORT (LDM, Windows 2000/XP/Vista Dynamic Disks)
M: "Richard Russon (FlatCap)" <ldm@flatcap.org>
......@@ -5973,10 +5980,10 @@ F: drivers/nfc/
F: include/linux/platform_data/pn544.h
NFS, SUNRPC, AND LOCKD CLIENTS
M: Trond Myklebust <Trond.Myklebust@netapp.com>
M: Trond Myklebust <trond.myklebust@primarydata.com>
L: linux-nfs@vger.kernel.org
W: http://client.linux-nfs.org
T: git git://git.linux-nfs.org/pub/linux/nfs-2.6.git
T: git git://git.linux-nfs.org/projects/trondmy/linux-nfs.git
S: Maintained
F: fs/lockd/
F: fs/nfs/
......@@ -6243,8 +6250,8 @@ OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
M: Rob Herring <rob.herring@calxeda.com>
M: Pawel Moll <pawel.moll@arm.com>
M: Mark Rutland <mark.rutland@arm.com>
M: Stephen Warren <swarren@wwwdotorg.org>
M: Ian Campbell <ijc+devicetree@hellion.org.uk>
M: Kumar Gala <galak@codeaurora.org>
L: devicetree@vger.kernel.org
S: Maintained
F: Documentation/devicetree/
......@@ -7385,7 +7392,6 @@ S: Maintained
F: kernel/sched/
F: include/linux/sched.h
F: include/uapi/linux/sched.h
F: kernel/wait.c
F: include/linux/wait.h
SCORE ARCHITECTURE
......
Makefile
浏览文件 @ 13ccb93f
VERSION = 3
PATCHLEVEL = 13
SUBLEVEL = 0
EXTRAVERSION = -rc2
EXTRAVERSION = -rc3
NAME = One Giant Leap for Frogkind
# *DOCUMENTATION*
......
arch/arm/boot/dts/am335x-base0033.dts
浏览文件 @ 13ccb93f
......@@ -13,4 +13,83 @@
/ {
model = "IGEP COM AM335x on AQUILA Expansion";
compatible = "isee,am335x-base0033", "isee,am335x-igep0033", "ti,am33xx";
hdmi {
compatible = "ti,tilcdc,slave";
i2c = <&i2c0>;
pinctrl-names = "default", "off";
pinctrl-0 = <&nxp_hdmi_pins>;
pinctrl-1 = <&nxp_hdmi_off_pins>;
status = "okay";
};
leds_base {
pinctrl-names = "default";
pinctrl-0 = <&leds_base_pins>;
compatible = "gpio-leds";
led@0 {
label = "base:red:user";
gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; /* gpio1_21 */
default-state = "off";
};
led@1 {
label = "base:green:user";
gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; /* gpio2_0 */
default-state = "off";
};
};
};
&am33xx_pinmux {
nxp_hdmi_pins: pinmux_nxp_hdmi_pins {
pinctrl-single,pins = <
0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */
0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0 */
0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1 */
0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2 */
0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3 */
0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4 */
0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5 */
0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6 */
0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7 */
0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8 */
0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9 */
0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10 */
0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11 */
0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12 */
0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13 */
0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14 */
0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15 */
0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync */
0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync */
0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk */
0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en */
>;
};
nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins {
pinctrl-single,pins = <
0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */
>;
};
leds_base_pins: pinmux_leds_base_pins {
pinctrl-single,pins = <
0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
0x88 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.gpio2_0 */
>;
};
};
&lcdc {
status = "okay";
};
&i2c0 {
eeprom: eeprom@50 {
compatible = "at,24c256";
reg = <0x50>;
};
};
arch/arm/boot/dts/am335x-igep0033.dtsi
浏览文件 @ 13ccb93f
......@@ -199,6 +199,35 @@
pinctrl-0 = <&uart0_pins>;
};
&usb {
status = "okay";
control@44e10000 {
status = "okay";
};
usb-phy@47401300 {
status = "okay";
};
usb-phy@47401b00 {
status = "okay";
};
usb@47401000 {
status = "okay";
};
usb@47401800 {
status = "okay";
dr_mode = "host";
};
dma-controller@07402000 {
status = "okay";
};
};
#include "tps65910.dtsi"
&tps {
......
arch/arm/boot/dts/armada-370-db.dts
浏览文件 @ 13ccb93f
......@@ -99,22 +99,22 @@
spi-max-frequency = <50000000>;
};
};
};
pcie-controller {
pcie-controller {
status = "okay";
/*
* The two PCIe units are accessible through
* both standard PCIe slots and mini-PCIe
* slots on the board.
*/
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
};
pcie@2,0 {
/* Port 1, Lane 0 */
status = "okay";
/*
* The two PCIe units are accessible through
* both standard PCIe slots and mini-PCIe
* slots on the board.
*/
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
};
pcie@2,0 {
/* Port 1, Lane 0 */
status = "okay";
};
};
};
};
......
arch/arm/boot/dts/armada-370-xp.dtsi
浏览文件 @ 13ccb93f
......@@ -118,7 +118,7 @@
coherency-fabric@20200 {
compatible = "marvell,coherency-fabric";
reg = <0x20200 0xb0>, <0x21810 0x1c>;
reg = <0x20200 0xb0>, <0x21010 0x1c>;
};
serial@12000 {
......
arch/arm/boot/dts/armada-xp-mv78230.dtsi
浏览文件 @ 13ccb93f
......@@ -47,7 +47,7 @@
/*
* MV78230 has 2 PCIe units Gen2.0: One unit can be
* configured as x4 or quad x1 lanes. One unit is
* x4/x1.
* x1 only.
*/
pcie-controller {
compatible = "marvell,armada-xp-pcie";
......@@ -62,10 +62,10 @@
ranges =
<0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */
0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */
0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */
0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */
0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
......@@ -74,8 +74,8 @@
0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */
0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */
0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>;
0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */>;
pcie@1,0 {
device_type = "pci";
......@@ -145,20 +145,20 @@
status = "disabled";
};
pcie@9,0 {
pcie@5,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
reg = <0x4800 0 0 0 0>;
assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
reg = <0x2800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
0x81000000 0 0 0x81000000 0x9 0 1 0>;
ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
0x81000000 0 0 0x81000000 0x5 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 99>;
marvell,pcie-port = <2>;
interrupt-map = <0 0 0 0 &mpic 62>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 26>;
clocks = <&gateclk 9>;
status = "disabled";
};
};
......
arch/arm/boot/dts/armada-xp-mv78260.dtsi
浏览文件 @ 13ccb93f
......@@ -48,7 +48,7 @@
/*
* MV78260 has 3 PCIe units Gen2.0: Two units can be
* configured as x4 or quad x1 lanes. One unit is
* x4/x1.
* x4 only.
*/
pcie-controller {
compatible = "marvell,armada-xp-pcie";
......@@ -68,7 +68,9 @@
0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */
0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */
0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */
0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */
0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */
0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */
0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
......@@ -77,10 +79,18 @@
0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */
0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */
0x82000000 0x9 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
0x81000000 0x9 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */
0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>;
0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */
0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */
0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */
0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */
0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>;
pcie@1,0 {
device_type = "pci";
......@@ -106,8 +116,8 @@
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 59>;
marvell,pcie-port = <0>;
......@@ -150,37 +160,88 @@
status = "disabled";
};
pcie@9,0 {
pcie@5,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
reg = <0x4800 0 0 0 0>;
assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
reg = <0x2800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
0x81000000 0 0 0x81000000 0x9 0 1 0>;
ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
0x81000000 0 0 0x81000000 0x5 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 99>;
marvell,pcie-port = <2>;
interrupt-map = <0 0 0 0 &mpic 62>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 26>;
clocks = <&gateclk 9>;
status = "disabled";
};
pcie@10,0 {
pcie@6,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x82000 0 0x2000>;
reg = <0x5000 0 0 0 0>;
assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
reg = <0x3000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
0x81000000 0 0 0x81000000 0xa 0 1 0>;
ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
0x81000000 0 0 0x81000000 0x6 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 103>;
marvell,pcie-port = <3>;
interrupt-map = <0 0 0 0 &mpic 63>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <1>;
clocks = <&gateclk 10>;
status = "disabled";
};
pcie@7,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
reg = <0x3800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
0x81000000 0 0 0x81000000 0x7 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 64>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <2>;
clocks = <&gateclk 11>;
status = "disabled";
};
pcie@8,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
reg = <0x4000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
0x81000000 0 0 0x81000000 0x8 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 65>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <3>;
clocks = <&gateclk 12>;
status = "disabled";
};
pcie@9,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
reg = <0x4800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
0x81000000 0 0 0x81000000 0x9 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 99>;
marvell,pcie-port = <2>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 27>;
clocks = <&gateclk 26>;
status = "disabled";
};
};
......
arch/arm/boot/dts/at91sam9x5_usart3.dtsi
浏览文件 @ 13ccb93f
......@@ -11,6 +11,10 @@
#include <dt-bindings/interrupt-controller/irq.h>
/ {
aliases {
serial4 = &usart3;
};
ahb {
apb {
pinctrl@fffff400 {
......
arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
浏览文件 @ 13ccb93f
......@@ -44,8 +44,8 @@
gpmc,wr-access-ns = <186>;
gpmc,cycle2cycle-samecsen;
gpmc,cycle2cycle-diffcsen;
vmmc-supply = <&vddvario>;
vmmc_aux-supply = <&vdd33a>;
vddvario-supply = <&vddvario>;
vdd33a-supply = <&vdd33a>;
reg-io-width = <4>;
smsc,save-mac-address;
};
......
arch/arm/boot/dts/omap3-beagle-xm.dts
浏览文件 @ 13ccb93f
......@@ -215,3 +215,10 @@
&usbhsehci {
phys = <0 &hsusb2_phy>;
};
&vaux2 {
regulator-name = "usb_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
arch/arm/boot/dts/omap3-beagle.dts
浏览文件 @ 13ccb93f
......@@ -61,6 +61,14 @@
vcc-supply = <&hsusb2_power>;
};
sound {
compatible = "ti,omap-twl4030";
ti,model = "omap3beagle";
ti,mcbsp = <&mcbsp2>;
ti,codec = <&twl_audio>;
};
gpio_keys {
compatible = "gpio-keys";
......@@ -120,6 +128,12 @@
reg = <0x48>;
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
interrupt-parent = <&intc>;
twl_audio: audio {
compatible = "ti,twl4030-audio";
codec {
};
};
};
};
......@@ -178,3 +192,10 @@
mode = <3>;
power = <50>;
};
&vaux2 {
regulator-name = "vdd_ehci";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
arch/arm/boot/dts/omap3-igep.dtsi
浏览文件 @ 13ccb93f
/*
* Device Tree Source for IGEP Technology devices
* Common device tree for IGEP boards based on AM/DM37x
*
* Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
* Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
......@@ -10,7 +10,7 @@
*/
/dts-v1/;
#include "omap34xx.dtsi"
#include "omap36xx.dtsi"
/ {
memory {
......@@ -24,6 +24,25 @@
ti,mcbsp = <&mcbsp2>;
ti,codec = <&twl_audio>;
};
vdd33: regulator-vdd33 {
compatible = "regulator-fixed";
regulator-name = "vdd33";
regulator-always-on;
};
lbee1usjyc_vmmc: lbee1usjyc_vmmc {
pinctrl-names = "default";
pinctrl-0 = <&lbee1usjyc_pins>;
compatible = "regulator-fixed";
regulator-name = "regulator-lbee1usjyc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* gpio_138 WIFI_PDN */
startup-delay-us = <10000>;
enable-active-high;
vin-supply = <&vdd33>;
};
};
&omap3_pmx_core {
......@@ -48,6 +67,15 @@
>;
};
/* WiFi/BT combo */
lbee1usjyc_pins: pinmux_lbee1usjyc_pins {
pinctrl-single,pins = <
0x136 (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 */
0x138 (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 */
0x13a (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 */
>;
};
mcbsp2_pins: pinmux_mcbsp2_pins {
pinctrl-single,pins = <
0x10c (PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */
......@@ -65,10 +93,17 @@
0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
0x120 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */
0x122 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */
0x124 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */
0x126 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */
>;
};
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
>;
};
......@@ -78,10 +113,33 @@
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
0x18a (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
0x18c (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
>;
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
0x18e (PIN_INPUT | MUX_MODE0) /* i2c2_scl.i2c2_scl */
0x190 (PIN_INPUT | MUX_MODE0) /* i2c2_sda.i2c2_sda */
>;
};
i2c3_pins: pinmux_i2c3_pins {
pinctrl-single,pins = <
0x192 (PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */
0x194 (PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */
>;
};
leds_pins: pinmux_leds_pins { };
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
clock-frequency = <2600000>;
twl: twl@48 {
......@@ -101,9 +159,16 @@
#include "twl4030_omap3.dtsi"
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
clock-frequency = <400000>;
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pins>;
};
&mcbsp2 {
pinctrl-names = "default";
pinctrl-0 = <&mcbsp2_pins>;
......@@ -114,11 +179,15 @@
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&vmmc1>;
vmmc_aux-supply = <&vsim>;
bus-width = <8>;
bus-width = <4>;
};
&mmc2 {
status = "disabled";
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&lbee1usjyc_vmmc>;
bus-width = <4>;
non-removable;
};
&mmc3 {
......
arch/arm/boot/dts/omap3-igep0020.dts
浏览文件 @ 13ccb93f
/*
* Device Tree Source for IGEPv2 board
* Device Tree Source for IGEPv2 Rev. (TI OMAP AM/DM37x)
*
* Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
* Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
......@@ -13,7 +13,7 @@
#include "omap-gpmc-smsc911x.dtsi"
/ {
model = "IGEPv2";
model = "IGEPv2 (TI OMAP AM/DM37x)";
compatible = "isee,omap3-igep0020", "ti,omap3";
leds {
......@@ -67,6 +67,8 @@
pinctrl-names = "default";
pinctrl-0 = <
&hsusbb1_pins
&tfp410_pins
&dss_pins
>;
hsusbb1_pins: pinmux_hsusbb1_pins {
......@@ -85,6 +87,45 @@
0x5ba (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d7.hsusb1_data3 */
>;
};
tfp410_pins: tfp410_dvi_pins {
pinctrl-single,pins = <
0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
>;
};
dss_pins: pinmux_dss_dvi_pins {
pinctrl-single,pins = <
0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
>;
};
};
&leds_pins {
......@@ -174,3 +215,8 @@
&usbhsehci {
phys = <&hsusb1_phy>;
};
&vpll2 {
/* Needed for DSS */
regulator-name = "vdds_dsi";
};
arch/arm/boot/dts/omap3-igep0030.dts
浏览文件 @ 13ccb93f
/*
* Device Tree Source for IGEP COM Module
* Device Tree Source for IGEP COM MODULE (TI OMAP AM/DM37x)
*
* Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
* Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
......@@ -12,7 +12,7 @@
#include "omap3-igep.dtsi"
/ {
model = "IGEP COM Module";
model = "IGEP COM MODULE (TI OMAP AM/DM37x)";
compatible = "isee,omap3-igep0030", "ti,omap3";
leds {
......
arch/arm/boot/dts/omap3-n900.dts
浏览文件 @ 13ccb93f
......@@ -125,6 +125,21 @@
>;
};
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */
0x136 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */
0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */
0x13a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */
>;
};
display_pins: pinmux_display_pins {
pinctrl-single,pins = <
0x0d4 (PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */
......@@ -358,8 +373,14 @@
cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
};
/* most boards use vaux3, only some old versions use vmmc2 instead */
&mmc2 {
status = "disabled";
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&vaux3>;
vmmc_aux-supply = <&vsim>;
bus-width = <8>;
non-removable;
};
&mmc3 {
......
arch/arm/boot/dts/omap3.dtsi
浏览文件 @ 13ccb93f
......@@ -82,6 +82,13 @@
ranges;
ti,hwmods = "l3_main";
aes: aes@480c5000 {
compatible = "ti,omap3-aes";
ti,hwmods = "aes";
reg = <0x480c5000 0x50>;
interrupts = <0>;
};
counter32k: counter@48320000 {
compatible = "ti,omap-counter32k";
reg = <0x48320000 0x20>;
......@@ -260,6 +267,13 @@
ti,hwmods = "i2c3";
};
mailbox: mailbox@48094000 {
compatible = "ti,omap3-mailbox";
ti,hwmods = "mailbox";
reg = <0x48094000 0x200>;
interrupts = <26>;
};
mcspi1: spi@48098000 {
compatible = "ti,omap2-mcspi";
reg = <0x48098000 0x100>;
......@@ -357,6 +371,13 @@
dma-names = "tx", "rx";
};
mmu_isp: mmu@480bd400 {
compatible = "ti,omap3-mmu-isp";
ti,hwmods = "mmu_isp";
reg = <0x480bd400 0x80>;
interrupts = <8>;
};
wdt2: wdt@48314000 {
compatible = "ti,omap3-wdt";
reg = <0x48314000 0x80>;
......@@ -442,6 +463,27 @@
dma-names = "tx", "rx";
};
sham: sham@480c3000 {
compatible = "ti,omap3-sham";
ti,hwmods = "sham";
reg = <0x480c3000 0x64>;
interrupts = <49>;
};
smartreflex_core: smartreflex@480cb000 {
compatible = "ti,omap3-smartreflex-core";
ti,hwmods = "smartreflex_core";
reg = <0x480cb000 0x400>;
interrupts = <19>;
};
smartreflex_mpu_iva: smartreflex@480c9000 {
compatible = "ti,omap3-smartreflex-iva";
ti,hwmods = "smartreflex_mpu_iva";
reg = <0x480c9000 0x400>;
interrupts = <18>;
};
timer1: timer@48318000 {
compatible = "ti,omap3430-timer";
reg = <0x48318000 0x400>;
......
arch/arm/boot/dts/omap4-panda-common.dtsi
浏览文件 @ 13ccb93f
......@@ -246,15 +246,6 @@
0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
>;
};
};
&omap4_pmx_wkup {
led_wkgpio_pins: pinmux_leds_wkpins {
pinctrl-single,pins = <
0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */
0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */
>;
};
/*
* wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
......@@ -274,7 +265,7 @@
pinctrl-single,pins = <
0x38 (PIN_INPUT | MUX_MODE3) /* gpmc_ncs2.gpio_52 */
0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
0x108 (PIN_OUTPUT | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
......@@ -284,6 +275,15 @@
};
};
&omap4_pmx_wkup {
led_wkgpio_pins: pinmux_leds_wkpins {
pinctrl-single,pins = <
0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */
0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */
>;
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
......
arch/arm/boot/dts/omap4-sdp.dts
浏览文件 @ 13ccb93f
......@@ -300,12 +300,12 @@
wl12xx_pins: pinmux_wl12xx_pins {
pinctrl-single,pins = <
0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
0x108 (PIN_OUTPUT | MUX_MODE3) /* sdmmc5_clk.sdmmc5_clk */
0x10a (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_cmd.sdmmc5_cmd */
0x10c (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat0.sdmmc5_dat0 */
0x10e (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat1.sdmmc5_dat1 */
0x110 (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat2.sdmmc5_dat2 */
0x112 (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat3.sdmmc5_dat3 */
0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */
0x112 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
>;
};
};
......
arch/arm/boot/dts/socfpga.dtsi
浏览文件 @ 13ccb93f
......@@ -245,14 +245,14 @@
mpu_periph_clk: mpu_periph_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-gate-clk";
compatible = "altr,socfpga-perip-clk";
clocks = <&mpuclk>;
fixed-divider = <4>;
};
mpu_l2_ram_clk: mpu_l2_ram_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-gate-clk";
compatible = "altr,socfpga-perip-clk";
clocks = <&mpuclk>;
fixed-divider = <2>;
};
......@@ -266,8 +266,9 @@
l3_main_clk: l3_main_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-gate-clk";
compatible = "altr,socfpga-perip-clk";
clocks = <&mainclk>;
fixed-divider = <1>;
};
l3_mp_clk: l3_mp_clk {
......
arch/arm/configs/multi_v7_defconfig
浏览文件 @ 13ccb93f
......@@ -69,6 +69,7 @@ CONFIG_KS8851=y
CONFIG_SMSC911X=y
CONFIG_STMMAC_ETH=y
CONFIG_MDIO_SUN4I=y
CONFIG_TI_CPSW=y
CONFIG_KEYBOARD_SPEAR=y
CONFIG_SERIO_AMBAKMI=y
CONFIG_SERIAL_8250=y
......@@ -133,12 +134,14 @@ CONFIG_USB_GPIO_VBUS=y
CONFIG_USB_ISP1301=y
CONFIG_USB_MXS_PHY=y
CONFIG_MMC=y
CONFIG_MMC_BLOCK_MINORS=16
CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_ESDHC_IMX=y
CONFIG_MMC_SDHCI_TEGRA=y
CONFIG_MMC_SDHCI_SPEAR=y
CONFIG_MMC_SDHCI_BCM_KONA=y
CONFIG_MMC_OMAP=y
CONFIG_MMC_OMAP_HS=y
CONFIG_EDAC=y
......
arch/arm/configs/omap2plus_defconfig
浏览文件 @ 13ccb93f
......@@ -173,6 +173,7 @@ CONFIG_MFD_PALMAS=y
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TPS65910=y
CONFIG_TWL6040_CORE=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_PALMAS=y
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
......
arch/arm/configs/sunxi_defconfig
浏览文件 @ 13ccb93f
......@@ -12,6 +12,9 @@ CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
......@@ -58,4 +61,8 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_COMMON_CLK_DEBUG=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_TMPFS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_NLS=y
CONFIG_PRINTK_TIME=y
arch/arm/configs/u8500_defconfig
浏览文件 @ 13ccb93f
......@@ -22,6 +22,7 @@ CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8"
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_CPU_IDLE=y
CONFIG_ARM_U8500_CPUIDLE=y
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_PM_RUNTIME=y
......@@ -109,6 +110,8 @@ CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS=y
CONFIG_VFAT_FS=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_MISC_FILESYSTEMS is not set
......
arch/arm/include/asm/pgtable.h
浏览文件 @ 13ccb93f
......@@ -61,7 +61,7 @@ extern void __pgd_error(const char *file, int line, pgd_t);
* mapping to be mapped at. This is particularly important for
* non-high vector CPUs.
*/
#define FIRST_USER_ADDRESS PAGE_SIZE
#define FIRST_USER_ADDRESS (PAGE_SIZE * 2)
/*
* Use TASK_SIZE as the ceiling argument for free_pgtables() and
......
arch/arm/kernel/machine_kexec.c
浏览文件 @ 13ccb93f
......@@ -14,11 +14,12 @@
#include <asm/pgalloc.h>
#include <asm/mmu_context.h>
#include <asm/cacheflush.h>
#include <asm/fncpy.h>
#include <asm/mach-types.h>
#include <asm/smp_plat.h>
#include <asm/system_misc.h>
extern const unsigned char relocate_new_kernel[];
extern void relocate_new_kernel(void);
extern const unsigned int relocate_new_kernel_size;
extern unsigned long kexec_start_address;
......@@ -142,6 +143,8 @@ void machine_kexec(struct kimage *image)
{
unsigned long page_list;
unsigned long reboot_code_buffer_phys;
unsigned long reboot_entry = (unsigned long)relocate_new_kernel;
unsigned long reboot_entry_phys;
void *reboot_code_buffer;
/*
......@@ -168,16 +171,16 @@ void machine_kexec(struct kimage *image)
/* copy our kernel relocation code to the control code page */
memcpy(reboot_code_buffer,
relocate_new_kernel, relocate_new_kernel_size);
reboot_entry = fncpy(reboot_code_buffer,
reboot_entry,
relocate_new_kernel_size);
reboot_entry_phys = (unsigned long)reboot_entry +
(reboot_code_buffer_phys - (unsigned long)reboot_code_buffer);
flush_icache_range((unsigned long) reboot_code_buffer,
(unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
printk(KERN_INFO "Bye!\n");
if (kexec_reinit)
kexec_reinit();
soft_restart(reboot_code_buffer_phys);
soft_restart(reboot_entry_phys);
}
arch/arm/kernel/relocate_kernel.S
浏览文件 @ 13ccb93f
......@@ -2,10 +2,12 @@
* relocate_kernel.S - put the kernel image in place to boot
*/
#include <linux/linkage.h>
#include <asm/kexec.h>
.globl relocate_new_kernel
relocate_new_kernel:
.align 3 /* not needed for this code, but keeps fncpy() happy */
ENTRY(relocate_new_kernel)
ldr r0,kexec_indirection_page
ldr r1,kexec_start_address
......@@ -79,6 +81,8 @@ kexec_mach_type:
kexec_boot_atags:
.long 0x0
ENDPROC(relocate_new_kernel)
relocate_new_kernel_end:
.globl relocate_new_kernel_size
......
arch/arm/kernel/sigreturn_codes.S
浏览文件 @ 13ccb93f
......@@ -30,6 +30,27 @@
* snippets.
*/
/*
* In CPU_THUMBONLY case kernel arm opcodes are not allowed.
* Note in this case codes skips those instructions but it uses .org
* directive to keep correct layout of sigreturn_codes array.
*/
#ifndef CONFIG_CPU_THUMBONLY
#define ARM_OK(code...) code
#else
#define ARM_OK(code...)
#endif
.macro arm_slot n
.org sigreturn_codes + 12 * (\n)
ARM_OK( .arm )
.endm
.macro thumb_slot n
.org sigreturn_codes + 12 * (\n) + 8
.thumb
.endm
#if __LINUX_ARM_ARCH__ <= 4
/*
* Note we manually set minimally required arch that supports
......@@ -45,26 +66,27 @@
.global sigreturn_codes
.type sigreturn_codes, #object
.arm
.align
sigreturn_codes:
/* ARM sigreturn syscall code snippet */
mov r7, #(__NR_sigreturn - __NR_SYSCALL_BASE)
swi #(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE)
arm_slot 0
ARM_OK( mov r7, #(__NR_sigreturn - __NR_SYSCALL_BASE) )
ARM_OK( swi #(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE) )
/* Thumb sigreturn syscall code snippet */
.thumb
thumb_slot 0
movs r7, #(__NR_sigreturn - __NR_SYSCALL_BASE)
swi #0
/* ARM sigreturn_rt syscall code snippet */
.arm
mov r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE)
swi #(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE)
arm_slot 1
ARM_OK( mov r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE) )
ARM_OK( swi #(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE) )
/* Thumb sigreturn_rt syscall code snippet */
.thumb
thumb_slot 1
movs r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE)
swi #0
......@@ -74,7 +96,7 @@ sigreturn_codes:
* it is thumb case or not, so we need additional
* word after real last entry.
*/
.arm
arm_slot 2
.space 4
.size sigreturn_codes, . - sigreturn_codes
arch/arm/lib/delay-loop.S
浏览文件 @ 13ccb93f
......@@ -40,6 +40,7 @@ ENTRY(__loop_const_udelay) @ 0 <= r0 <= 0x7fffff06
/*
* loops = r0 * HZ * loops_per_jiffy / 1000000
*/
.align 3
@ Delay routine
ENTRY(__loop_delay)
......
arch/arm/mach-at91/at91rm9200_time.c
浏览文件 @ 13ccb93f
......@@ -174,7 +174,6 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
static struct clock_event_device clkevt = {
.name = "at91_tick",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.shift = 32,
.rating = 150,
.set_next_event = clkevt32k_next_event,
.set_mode = clkevt32k_mode,
......@@ -265,11 +264,9 @@ void __init at91rm9200_timer_init(void)
at91_st_write(AT91_ST_RTMR, 1);
/* Setup timer clockevent, with minimum of two ticks (important!!) */
clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift);
clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt);
clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1;
clkevt.cpumask = cpumask_of(0);
clockevents_register_device(&clkevt);
clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK,
2, AT91_ST_ALMV);
/* register clocksource */
clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK);
......
arch/arm/mach-at91/pm.h
浏览文件 @ 13ccb93f
......@@ -16,7 +16,11 @@
#include <mach/at91_ramc.h>
#include <mach/at91rm9200_sdramc.h>
#ifdef CONFIG_PM
extern void at91_pm_set_standby(void (*at91_standby)(void));
#else
static inline void at91_pm_set_standby(void (*at91_standby)(void)) { }
#endif
/*
* The AT91RM9200 goes into self-refresh mode with this command, and will
......
arch/arm/mach-at91/sama5d3.c
浏览文件 @ 13ccb93f
......@@ -95,19 +95,19 @@ static struct clk twi0_clk = {
.name = "twi0_clk",
.pid = SAMA5D3_ID_TWI0,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
.div = AT91_PMC_PCR_DIV8,
};
static struct clk twi1_clk = {
.name = "twi1_clk",
.pid = SAMA5D3_ID_TWI1,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
.div = AT91_PMC_PCR_DIV8,
};
static struct clk twi2_clk = {
.name = "twi2_clk",
.pid = SAMA5D3_ID_TWI2,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
.div = AT91_PMC_PCR_DIV8,
};
static struct clk mmc0_clk = {
.name = "mci0_clk",
......
arch/arm/mach-footbridge/common.c
浏览文件 @ 13ccb93f
......@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/spinlock.h>
#include <video/vga.h>
#include <asm/pgtable.h>
#include <asm/page.h>
......@@ -196,6 +197,8 @@ void __init footbridge_map_io(void)
iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc));
pci_map_io_early(__phys_to_pfn(DC21285_PCI_IO));
}
vga_base = PCIMEM_BASE;
}
void footbridge_restart(enum reboot_mode mode, const char *cmd)
......
arch/arm/mach-footbridge/dc21285.c
浏览文件 @ 13ccb93f
......@@ -18,7 +18,6 @@
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/spinlock.h>
#include <video/vga.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
......@@ -291,7 +290,6 @@ void __init dc21285_preinit(void)
int cfn_mode;
pcibios_min_mem = 0x81000000;
vga_base = PCIMEM_BASE;
mem_size = (unsigned int)high_memory - PAGE_OFFSET;
for (mem_mask = 0x00100000; mem_mask < 0x10000000; mem_mask <<= 1)
......
arch/arm/mach-footbridge/ebsa285.c
浏览文件 @ 13ccb93f
......@@ -30,21 +30,24 @@ static const struct {
const char *name;
const char *trigger;
} ebsa285_leds[] = {
{ "ebsa285:amber", "heartbeat", },
{ "ebsa285:green", "cpu0", },
{ "ebsa285:amber", "cpu0", },
{ "ebsa285:green", "heartbeat", },
{ "ebsa285:red",},
};
static unsigned char hw_led_state;
static void ebsa285_led_set(struct led_classdev *cdev,
enum led_brightness b)
{
struct ebsa285_led *led = container_of(cdev,
struct ebsa285_led, cdev);
if (b != LED_OFF)
*XBUS_LEDS |= led->mask;
if (b == LED_OFF)
hw_led_state |= led->mask;
else
*XBUS_LEDS &= ~led->mask;
hw_led_state &= ~led->mask;
*XBUS_LEDS = hw_led_state;
}
static enum led_brightness ebsa285_led_get(struct led_classdev *cdev)
......@@ -52,18 +55,19 @@ static enum led_brightness ebsa285_led_get(struct led_classdev *cdev)
struct ebsa285_led *led = container_of(cdev,
struct ebsa285_led, cdev);
return (*XBUS_LEDS & led->mask) ? LED_FULL : LED_OFF;
return hw_led_state & led->mask ? LED_OFF : LED_FULL;
}
static int __init ebsa285_leds_init(void)
{
int i;
if (machine_is_ebsa285())
if (!machine_is_ebsa285())
return -ENODEV;
/* 3 LEDS All ON */
*XBUS_LEDS |= XBUS_LED_AMBER | XBUS_LED_GREEN | XBUS_LED_RED;
/* 3 LEDS all off */
hw_led_state = XBUS_LED_AMBER | XBUS_LED_GREEN | XBUS_LED_RED;
*XBUS_LEDS = hw_led_state;
for (i = 0; i < ARRAY_SIZE(ebsa285_leds); i++) {
struct ebsa285_led *led;
......
arch/arm/mach-omap2/dss-common.c
浏览文件 @ 13ccb93f
......@@ -223,7 +223,7 @@ void __init omap_4430sdp_display_init_of(void)
static struct connector_dvi_platform_data omap3_igep2_dvi_connector_pdata = {
.name = "dvi",
.source = "tfp410.0",
.i2c_bus_num = 3,
.i2c_bus_num = 2,
};
static struct platform_device omap3_igep2_dvi_connector_device = {
......
arch/arm/mach-omap2/pdata-quirks.c
浏览文件 @ 13ccb93f
......@@ -139,6 +139,7 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
static struct pdata_init pdata_quirks[] __initdata = {
#ifdef CONFIG_ARCH_OMAP3
{ "nokia,omap3-n900", hsmmc2_internal_input_clk, },
{ "nokia,omap3-n9", hsmmc2_internal_input_clk, },
{ "nokia,omap3-n950", hsmmc2_internal_input_clk, },
{ "isee,omap3-igep0020", omap3_igep0020_legacy_init, },
......
arch/arm/mach-omap2/powerdomain.c
浏览文件 @ 13ccb93f
......@@ -128,7 +128,8 @@ static int _pwrdm_register(struct powerdomain *pwrdm)
for (i = 0; i < pwrdm->banks; i++)
pwrdm->ret_mem_off_counter[i] = 0;
arch_pwrdm->pwrdm_wait_transition(pwrdm);
if (arch_pwrdm && arch_pwrdm->pwrdm_wait_transition)
arch_pwrdm->pwrdm_wait_transition(pwrdm);
pwrdm->state = pwrdm_read_pwrst(pwrdm);
pwrdm->state_counter[pwrdm->state] = 1;
......
arch/arm/mach-socfpga/Kconfig
浏览文件 @ 13ccb93f
......@@ -10,6 +10,7 @@ config ARCH_SOCFPGA
select GENERIC_CLOCKEVENTS
select GPIO_PL061 if GPIOLIB
select HAVE_ARM_SCU
select HAVE_ARM_TWD if SMP
select HAVE_SMP
select MFD_SYSCON
select SPARSE_IRQ
......
arch/arm/mach-ux500/cpu-db8500.c
浏览文件 @ 13ccb93f
......@@ -140,6 +140,10 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
/* Requires call-back bindings. */
OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
/* Requires DMA bindings. */
OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data),
OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data),
OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", &mop500_sdi2_data),
OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data),
OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
"ux500-msp-i2s.0", &msp0_platform_data),
OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,
......
arch/arm/mm/dma-mapping.c
浏览文件 @ 13ccb93f
......@@ -9,6 +9,7 @@
*
* DMA uncached mapping support.
*/
#include <linux/bootmem.h>
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/gfp.h>
......@@ -162,6 +163,8 @@ static u64 get_coherent_dma_mask(struct device *dev)
u64 mask = (u64)DMA_BIT_MASK(32);
if (dev) {
unsigned long max_dma_pfn;
mask = dev->coherent_dma_mask;
/*
......@@ -173,6 +176,8 @@ static u64 get_coherent_dma_mask(struct device *dev)
return 0;
}
max_dma_pfn = min(max_pfn, arm_dma_pfn_limit);
/*
* If the mask allows for more memory than we can address,
* and we actually have that much memory, then fail the
......@@ -180,7 +185,7 @@ static u64 get_coherent_dma_mask(struct device *dev)
*/
if (sizeof(mask) != sizeof(dma_addr_t) &&
mask > (dma_addr_t)~0 &&
dma_to_pfn(dev, ~0) > arm_dma_pfn_limit) {
dma_to_pfn(dev, ~0) > max_dma_pfn) {
dev_warn(dev, "Coherent DMA mask %#llx is larger than dma_addr_t allows\n",
mask);
dev_warn(dev, "Driver did not use or check the return value from dma_set_coherent_mask()?\n");
......@@ -192,7 +197,7 @@ static u64 get_coherent_dma_mask(struct device *dev)
* fits within the allowable addresses which we can
* allocate.
*/
if (dma_to_pfn(dev, mask) < arm_dma_pfn_limit) {
if (dma_to_pfn(dev, mask) < max_dma_pfn) {
dev_warn(dev, "Coherent DMA mask %#llx (pfn %#lx-%#lx) covers a smaller range of system memory than the DMA zone pfn 0x0-%#lx\n",
mask,
dma_to_pfn(dev, 0), dma_to_pfn(dev, mask) + 1,
......
arch/arm/mm/mmap.c
浏览文件 @ 13ccb93f
......@@ -146,7 +146,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
info.flags = VM_UNMAPPED_AREA_TOPDOWN;
info.length = len;
info.low_limit = PAGE_SIZE;
info.low_limit = FIRST_USER_ADDRESS;
info.high_limit = mm->mmap_base;
info.align_mask = do_align ? (PAGE_MASK & (SHMLBA - 1)) : 0;
info.align_offset = pgoff << PAGE_SHIFT;
......
arch/arm/mm/pgd.c
浏览文件 @ 13ccb93f
......@@ -87,7 +87,8 @@ pgd_t *pgd_alloc(struct mm_struct *mm)
init_pud = pud_offset(init_pgd, 0);
init_pmd = pmd_offset(init_pud, 0);
init_pte = pte_offset_map(init_pmd, 0);
set_pte_ext(new_pte, *init_pte, 0);
set_pte_ext(new_pte + 0, init_pte[0], 0);
set_pte_ext(new_pte + 1, init_pte[1], 0);
pte_unmap(init_pte);
pte_unmap(new_pte);
}
......
arch/arm/plat-omap/include/plat/dmtimer.h
浏览文件 @ 13ccb93f
......@@ -336,8 +336,11 @@ static inline void __omap_dm_timer_enable_posted(struct omap_dm_timer *timer)
if (timer->posted)
return;
if (timer->errata & OMAP_TIMER_ERRATA_I103_I767)
if (timer->errata & OMAP_TIMER_ERRATA_I103_I767) {
timer->posted = OMAP_TIMER_NONPOSTED;
__omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, 0, 0);
return;
}
__omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG,
OMAP_TIMER_CTRL_POSTED, 0);
......
arch/arm/xen/p2m.c
浏览文件 @ 13ccb93f
......@@ -25,8 +25,9 @@ struct xen_p2m_entry {
struct rb_node rbnode_phys;
};
rwlock_t p2m_lock;
static rwlock_t p2m_lock;
struct rb_root phys_to_mach = RB_ROOT;
EXPORT_SYMBOL_GPL(phys_to_mach);
static struct rb_root mach_to_phys = RB_ROOT;
static int xen_add_phys_to_mach_entry(struct xen_p2m_entry *new)
......@@ -200,7 +201,7 @@ bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn)
}
EXPORT_SYMBOL_GPL(__set_phys_to_machine);
int p2m_init(void)
static int p2m_init(void)
{
rwlock_init(&p2m_lock);
return 0;
......
arch/parisc/configs/c3000_defconfig
浏览文件 @ 13ccb93f
......@@ -50,7 +50,7 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_IDE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_NS87415=y
CONFIG_BLK_DEV_SIIMAGE=m
CONFIG_PATA_SIL680=m
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
......
arch/parisc/configs/c8000_defconfig
浏览文件 @ 13ccb93f
......@@ -20,7 +20,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_PA8X00=y
CONFIG_MLONGCALLS=y
CONFIG_64BIT=y
CONFIG_SMP=y
CONFIG_PREEMPT=y
......@@ -81,8 +80,6 @@ CONFIG_IDE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_PLATFORM=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_BLK_DEV_SIIMAGE=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=m
......@@ -94,6 +91,8 @@ CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
CONFIG_ATA=y
CONFIG_PATA_SIL680=y
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_SAS=y
......@@ -114,9 +113,8 @@ CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_KEYBOARD_HIL_OLD is not set
# CONFIG_KEYBOARD_HIL is not set
CONFIG_MOUSE_PS2=m
# CONFIG_MOUSE_PS2 is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_CM109=m
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_GSCPS2=m
......@@ -167,34 +165,6 @@ CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_AD1889=m
# CONFIG_SND_USB is not set
# CONFIG_SND_GSC is not set
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
CONFIG_HID_EZKEY=m
CONFIG_HID_KYE=m
CONFIG_HID_GYRATION=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LOGITECH=m
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_NTRIG=m
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
CONFIG_HID_PETALYNX=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_GREENASIA=m
CONFIG_HID_SMARTJOYPLUS=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_THRUSTMASTER=m
CONFIG_HID_ZEROPLUS=m
CONFIG_USB_HID=m
CONFIG_USB=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
......
arch/parisc/configs/generic-64bit_defconfig
浏览文件 @ 13ccb93f
......@@ -24,7 +24,6 @@ CONFIG_MODVERSIONS=y
CONFIG_BLK_DEV_INTEGRITY=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_PA8X00=y
CONFIG_MLONGCALLS=y
CONFIG_64BIT=y
CONFIG_SMP=y
# CONFIG_COMPACTION is not set
......@@ -68,7 +67,6 @@ CONFIG_IDE_GD=m
CONFIG_IDE_GD_ATAPI=y
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_NS87415=y
CONFIG_BLK_DEV_SIIMAGE=y
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=y
......@@ -82,6 +80,7 @@ CONFIG_SCSI_ZALON=y
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_DH=y
CONFIG_ATA=y
CONFIG_PATA_SIL680=y
CONFIG_ATA_GENERIC=y
CONFIG_MD=y
CONFIG_MD_LINEAR=m
......@@ -162,7 +161,7 @@ CONFIG_SLIP_MODE_SLIP6=y
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_HIL_OLD is not set
# CONFIG_KEYBOARD_HIL is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_MOUSE_PS2 is not set
CONFIG_INPUT_MISC=y
CONFIG_SERIO_SERPORT=m
# CONFIG_HP_SDC is not set
......@@ -216,32 +215,7 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
CONFIG_HID=m
CONFIG_HIDRAW=y
CONFIG_HID_DRAGONRISE=m
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_KYE=m
CONFIG_HID_GYRATION=m
CONFIG_HID_TWINHAN=m
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_HID_NTRIG=m
CONFIG_HID_PANTHERLORD=m
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=m
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TOPSEED=m
CONFIG_HID_THRUSTMASTER=m
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_ZEROPLUS=m
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
CONFIG_USB=y
......@@ -251,13 +225,8 @@ CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_MON=m
CONFIG_USB_WUSB_CBAF=m
CONFIG_USB_XHCI_HCD=m
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_R8A66597_HCD=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_TRIGGERS=y
......
arch/parisc/include/asm/serial.h
浏览文件 @ 13ccb93f
......@@ -6,5 +6,3 @@
* This is used for 16550-compatible UARTs
*/
#define BASE_BAUD ( 1843200 / 16 )
#define SERIAL_PORT_DFNS
arch/parisc/kernel/hardware.c
浏览文件 @ 13ccb93f
......@@ -36,6 +36,9 @@
* HP PARISC Hardware Database
* Access to this database is only possible during bootup
* so don't reference this table after starting the init process
*
* NOTE: Product names which are listed here and ends with a '?'
* are guessed. If you know the correct name, please let us know.
*/
static struct hp_hardware hp_hardware_list[] = {
......@@ -222,7 +225,7 @@ static struct hp_hardware hp_hardware_list[] = {
{HPHW_NPROC,0x5DD,0x4,0x81,"Duet W2"},
{HPHW_NPROC,0x5DE,0x4,0x81,"Piccolo W+"},
{HPHW_NPROC,0x5DF,0x4,0x81,"Cantata W2"},
{HPHW_NPROC,0x5DF,0x0,0x00,"Marcato W+? (rp5470)"},
{HPHW_NPROC,0x5DF,0x0,0x00,"Marcato W+ (rp5470)?"},
{HPHW_NPROC,0x5E0,0x4,0x91,"Cantata DC- W2"},
{HPHW_NPROC,0x5E1,0x4,0x91,"Crescendo DC- W2"},
{HPHW_NPROC,0x5E2,0x4,0x91,"Crescendo 650 W2"},
......@@ -276,9 +279,11 @@ static struct hp_hardware hp_hardware_list[] = {
{HPHW_NPROC,0x888,0x4,0x91,"Storm Peak Fast DC-"},
{HPHW_NPROC,0x889,0x4,0x91,"Storm Peak Fast"},
{HPHW_NPROC,0x88A,0x4,0x91,"Crestone Peak Slow"},
{HPHW_NPROC,0x88B,0x4,0x91,"Crestone Peak Fast?"},
{HPHW_NPROC,0x88C,0x4,0x91,"Orca Mako+"},
{HPHW_NPROC,0x88D,0x4,0x91,"Rainier/Medel Mako+ Slow"},
{HPHW_NPROC,0x88E,0x4,0x91,"Rainier/Medel Mako+ Fast"},
{HPHW_NPROC,0x892,0x4,0x91,"Mt. Hamilton Slow Mako+?"},
{HPHW_NPROC,0x894,0x4,0x91,"Mt. Hamilton Fast Mako+"},
{HPHW_NPROC,0x895,0x4,0x91,"Storm Peak Slow Mako+"},
{HPHW_NPROC,0x896,0x4,0x91,"Storm Peak Fast Mako+"},
......
arch/parisc/kernel/head.S
浏览文件 @ 13ccb93f
......@@ -41,9 +41,7 @@ END(boot_args)
.import fault_vector_11,code /* IVA parisc 1.1 32 bit */
.import $global$ /* forward declaration */
#endif /*!CONFIG_64BIT*/
.export _stext,data /* Kernel want it this way! */
_stext:
ENTRY(stext)
ENTRY(parisc_kernel_start)
.proc
.callinfo
......@@ -347,7 +345,7 @@ smp_slave_stext:
.procend
#endif /* CONFIG_SMP */
ENDPROC(stext)
ENDPROC(parisc_kernel_start)
#ifndef CONFIG_64BIT
.section .data..read_mostly
......
arch/parisc/kernel/sys_parisc.c
浏览文件 @ 13ccb93f
......@@ -61,8 +61,15 @@ static int get_offset(struct address_space *mapping)
return (unsigned long) mapping >> 8;
}
static unsigned long get_shared_area(struct address_space *mapping,
unsigned long addr, unsigned long len, unsigned long pgoff)
static unsigned long shared_align_offset(struct file *filp, unsigned long pgoff)
{
struct address_space *mapping = filp ? filp->f_mapping : NULL;
return (get_offset(mapping) + pgoff) << PAGE_SHIFT;
}
static unsigned long get_shared_area(struct file *filp, unsigned long addr,
unsigned long len, unsigned long pgoff)
{
struct vm_unmapped_area_info info;
......@@ -71,7 +78,7 @@ static unsigned long get_shared_area(struct address_space *mapping,
info.low_limit = PAGE_ALIGN(addr);
info.high_limit = TASK_SIZE;
info.align_mask = PAGE_MASK & (SHMLBA - 1);
info.align_offset = (get_offset(mapping) + pgoff) << PAGE_SHIFT;
info.align_offset = shared_align_offset(filp, pgoff);
return vm_unmapped_area(&info);
}
......@@ -82,20 +89,18 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr,
return -ENOMEM;
if (flags & MAP_FIXED) {
if ((flags & MAP_SHARED) &&
(addr - (pgoff << PAGE_SHIFT)) & (SHMLBA - 1))
(addr - shared_align_offset(filp, pgoff)) & (SHMLBA - 1))
return -EINVAL;
return addr;
}
if (!addr)
addr = TASK_UNMAPPED_BASE;
if (filp) {
addr = get_shared_area(filp->f_mapping, addr, len, pgoff);
} else if(flags & MAP_SHARED) {
addr = get_shared_area(NULL, addr, len, pgoff);
} else {
if (filp || (flags & MAP_SHARED))
addr = get_shared_area(filp, addr, len, pgoff);
else
addr = get_unshared_area(addr, len);
}
return addr;
}
......
arch/parisc/kernel/unwind.c
浏览文件 @ 13ccb93f
......@@ -168,7 +168,7 @@ void unwind_table_remove(struct unwind_table *table)
}
/* Called from setup_arch to import the kernel unwind info */
int unwind_init(void)
int __init unwind_init(void)
{
long start, stop;
register unsigned long gp __asm__ ("r27");
......@@ -233,7 +233,6 @@ static void unwind_frame_regs(struct unwind_frame_info *info)
e = find_unwind_entry(info->ip);
if (e == NULL) {
unsigned long sp;
extern char _stext[], _etext[];
dbg("Cannot find unwind entry for 0x%lx; forced unwinding\n", info->ip);
......@@ -281,8 +280,7 @@ static void unwind_frame_regs(struct unwind_frame_info *info)
break;
info->prev_ip = tmp;
sp = info->prev_sp;
} while (info->prev_ip < (unsigned long)_stext ||
info->prev_ip > (unsigned long)_etext);
} while (!kernel_text_address(info->prev_ip));
info->rp = 0;
......@@ -435,9 +433,8 @@ unsigned long return_address(unsigned int level)
do {
if (unwind_once(&info) < 0 || info.ip == 0)
return 0;
if (!__kernel_text_address(info.ip)) {
if (!kernel_text_address(info.ip))
return 0;
}
} while (info.ip && level--);
return info.ip;
......
arch/parisc/kernel/vmlinux.lds.S
浏览文件 @ 13ccb93f
......@@ -6,24 +6,19 @@
* Copyright (C) 2000 Michael Ang <mang with subcarrier.org>
* Copyright (C) 2002 Randolph Chung <tausq with parisc-linux.org>
* Copyright (C) 2003 James Bottomley <jejb with parisc-linux.org>
* Copyright (C) 2006 Helge Deller <deller@gmx.de>
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
* Copyright (C) 2006-2013 Helge Deller <deller@gmx.de>
*/
/*
* Put page table entries (swapper_pg_dir) as the first thing in .bss. This
* will ensure that it has .bss alignment (PAGE_SIZE).
*/
#define BSS_FIRST_SECTIONS *(.data..vm0.pmd) \
*(.data..vm0.pgd) \
*(.data..vm0.pte)
#include <asm-generic/vmlinux.lds.h>
/* needed for the processor specific cache alignment size */
#include <asm/cache.h>
#include <asm/page.h>
......@@ -39,7 +34,7 @@ OUTPUT_FORMAT("elf64-hppa-linux")
OUTPUT_ARCH(hppa:hppa2.0w)
#endif
ENTRY(_stext)
ENTRY(parisc_kernel_start)
#ifndef CONFIG_64BIT
jiffies = jiffies_64 + 4;
#else
......@@ -49,11 +44,29 @@ SECTIONS
{
. = KERNEL_BINARY_TEXT_START;
__init_begin = .;
HEAD_TEXT_SECTION
INIT_TEXT_SECTION(8)
. = ALIGN(PAGE_SIZE);
INIT_DATA_SECTION(PAGE_SIZE)
/* we have to discard exit text and such at runtime, not link time */
.exit.text :
{
EXIT_TEXT
}
.exit.data :
{
EXIT_DATA
}
PERCPU_SECTION(8)
. = ALIGN(PAGE_SIZE);
__init_end = .;
/* freed after init ends here */
_text = .; /* Text and read-only data */
.head ALIGN(16) : {
HEAD_TEXT
} = 0
.text ALIGN(16) : {
_stext = .;
.text ALIGN(PAGE_SIZE) : {
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
......@@ -68,21 +81,28 @@ SECTIONS
*(.lock.text) /* out-of-line lock text */
*(.gnu.warning)
}
/* End of text section */
. = ALIGN(PAGE_SIZE);
_etext = .;
/* End of text section */
/* Start of data section */
_sdata = .;
RODATA
RO_DATA_SECTION(8)
/* writeable */
/* Make sure this is page aligned so
* that we can properly leave these
* as writable
*/
. = ALIGN(PAGE_SIZE);
data_start = .;
#ifdef CONFIG_64BIT
. = ALIGN(16);
/* Linkage tables */
.opd : {
*(.opd)
} PROVIDE (__gp = .);
.plt : {
*(.plt)
}
.dlt : {
*(.dlt)
}
#endif
/* unwind info */
.PARISC.unwind : {
......@@ -91,7 +111,15 @@ SECTIONS
__stop___unwind = .;
}
EXCEPTION_TABLE(16)
/* writeable */
/* Make sure this is page aligned so
* that we can properly leave these
* as writable
*/
. = ALIGN(PAGE_SIZE);
data_start = .;
EXCEPTION_TABLE(8)
NOTES
/* Data */
......@@ -107,54 +135,8 @@ SECTIONS
_edata = .;
/* BSS */
__bss_start = .;
/* page table entries need to be PAGE_SIZE aligned */
. = ALIGN(PAGE_SIZE);
.data..vmpages : {
*(.data..vm0.pmd)
*(.data..vm0.pgd)
*(.data..vm0.pte)
}
.bss : {
*(.bss)
*(COMMON)
}
__bss_stop = .;
#ifdef CONFIG_64BIT
. = ALIGN(16);
/* Linkage tables */
.opd : {
*(.opd)
} PROVIDE (__gp = .);
.plt : {
*(.plt)
}
.dlt : {
*(.dlt)
}
#endif
BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 8)
/* reserve space for interrupt stack by aligning __init* to 16k */
. = ALIGN(16384);
__init_begin = .;
INIT_TEXT_SECTION(16384)
. = ALIGN(PAGE_SIZE);
INIT_DATA_SECTION(16)
/* we have to discard exit text and such at runtime, not link time */
.exit.text :
{
EXIT_TEXT
}
.exit.data :
{
EXIT_DATA
}
PERCPU_SECTION(L1_CACHE_BYTES)
. = ALIGN(PAGE_SIZE);
__init_end = .;
/* freed after init ends here */
_end = . ;
STABS_DEBUG
......
arch/parisc/mm/init.c
浏览文件 @ 13ccb93f
......@@ -32,6 +32,7 @@
#include <asm/sections.h>
extern int data_start;
extern void parisc_kernel_start(void); /* Kernel entry point in head.S */
#if PT_NLEVELS == 3
/* NOTE: This layout exactly conforms to the hybrid L2/L3 page table layout
......@@ -324,8 +325,9 @@ static void __init setup_bootmem(void)
reserve_bootmem_node(NODE_DATA(0), 0UL,
(unsigned long)(PAGE0->mem_free +
PDC_CONSOLE_IO_IODC_SIZE), BOOTMEM_DEFAULT);
reserve_bootmem_node(NODE_DATA(0), __pa((unsigned long)_text),
(unsigned long)(_end - _text), BOOTMEM_DEFAULT);
reserve_bootmem_node(NODE_DATA(0), __pa(KERNEL_BINARY_TEXT_START),
(unsigned long)(_end - KERNEL_BINARY_TEXT_START),
BOOTMEM_DEFAULT);
reserve_bootmem_node(NODE_DATA(0), (bootmap_start_pfn << PAGE_SHIFT),
((bootmap_pfn - bootmap_start_pfn) << PAGE_SHIFT),
BOOTMEM_DEFAULT);
......@@ -378,6 +380,17 @@ static void __init setup_bootmem(void)
request_resource(&sysram_resources[0], &pdcdata_resource);
}
static int __init parisc_text_address(unsigned long vaddr)
{
static unsigned long head_ptr __initdata;
if (!head_ptr)
head_ptr = PAGE_MASK & (unsigned long)
dereference_function_descriptor(&parisc_kernel_start);
return core_kernel_text(vaddr) || vaddr == head_ptr;
}
static void __init map_pages(unsigned long start_vaddr,
unsigned long start_paddr, unsigned long size,
pgprot_t pgprot, int force)
......@@ -466,7 +479,7 @@ static void __init map_pages(unsigned long start_vaddr,
*/
if (force)
pte = __mk_pte(address, pgprot);
else if (core_kernel_text(vaddr) &&
else if (parisc_text_address(vaddr) &&
address != fv_addr)
pte = __mk_pte(address, PAGE_KERNEL_EXEC);
else
......
arch/s390/crypto/aes_s390.c
浏览文件 @ 13ccb93f
......@@ -55,8 +55,7 @@ struct pcc_param {
struct s390_xts_ctx {
u8 key[32];
u8 xts_param[16];
struct pcc_param pcc;
u8 pcc_key[32];
long enc;
long dec;
int key_len;
......@@ -591,7 +590,7 @@ static int xts_aes_set_key(struct crypto_tfm *tfm, const u8 *in_key,
xts_ctx->enc = KM_XTS_128_ENCRYPT;
xts_ctx->dec = KM_XTS_128_DECRYPT;
memcpy(xts_ctx->key + 16, in_key, 16);
memcpy(xts_ctx->pcc.key + 16, in_key + 16, 16);
memcpy(xts_ctx->pcc_key + 16, in_key + 16, 16);
break;
case 48:
xts_ctx->enc = 0;
......@@ -602,7 +601,7 @@ static int xts_aes_set_key(struct crypto_tfm *tfm, const u8 *in_key,
xts_ctx->enc = KM_XTS_256_ENCRYPT;
xts_ctx->dec = KM_XTS_256_DECRYPT;
memcpy(xts_ctx->key, in_key, 32);
memcpy(xts_ctx->pcc.key, in_key + 32, 32);
memcpy(xts_ctx->pcc_key, in_key + 32, 32);
break;
default:
*flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
......@@ -621,29 +620,33 @@ static int xts_aes_crypt(struct blkcipher_desc *desc, long func,
unsigned int nbytes = walk->nbytes;
unsigned int n;
u8 *in, *out;
void *param;
struct pcc_param pcc_param;
struct {
u8 key[32];
u8 init[16];
} xts_param;
if (!nbytes)
goto out;
memset(xts_ctx->pcc.block, 0, sizeof(xts_ctx->pcc.block));
memset(xts_ctx->pcc.bit, 0, sizeof(xts_ctx->pcc.bit));
memset(xts_ctx->pcc.xts, 0, sizeof(xts_ctx->pcc.xts));
memcpy(xts_ctx->pcc.tweak, walk->iv, sizeof(xts_ctx->pcc.tweak));
param = xts_ctx->pcc.key + offset;
ret = crypt_s390_pcc(func, param);
memset(pcc_param.block, 0, sizeof(pcc_param.block));
memset(pcc_param.bit, 0, sizeof(pcc_param.bit));
memset(pcc_param.xts, 0, sizeof(pcc_param.xts));
memcpy(pcc_param.tweak, walk->iv, sizeof(pcc_param.tweak));
memcpy(pcc_param.key, xts_ctx->pcc_key, 32);
ret = crypt_s390_pcc(func, &pcc_param.key[offset]);
if (ret < 0)
return -EIO;
memcpy(xts_ctx->xts_param, xts_ctx->pcc.xts, 16);
param = xts_ctx->key + offset;
memcpy(xts_param.key, xts_ctx->key, 32);
memcpy(xts_param.init, pcc_param.xts, 16);
do {
/* only use complete blocks */
n = nbytes & ~(AES_BLOCK_SIZE - 1);
out = walk->dst.virt.addr;
in = walk->src.virt.addr;
ret = crypt_s390_km(func, param, out, in, n);
ret = crypt_s390_km(func, &xts_param.key[offset], out, in, n);
if (ret < 0 || ret != n)
return -EIO;
......
arch/um/Makefile
浏览文件 @ 13ccb93f
......@@ -33,12 +33,11 @@ MODE_INCLUDE += -I$(srctree)/$(ARCH_DIR)/include/shared/skas
HEADER_ARCH := $(SUBARCH)
# Additional ARCH settings for x86
ifeq ($(SUBARCH),i386)
HEADER_ARCH := x86
ifneq ($(filter $(SUBARCH),x86 x86_64 i386),)
HEADER_ARCH := x86
endif
ifeq ($(SUBARCH),x86_64)
HEADER_ARCH := x86
ifdef CONFIG_64BIT
KBUILD_CFLAGS += -mcmodel=large
endif
......
arch/um/kernel/sysrq.c
浏览文件 @ 13ccb93f
......@@ -19,7 +19,7 @@ struct stack_frame {
unsigned long return_address;
};
static void print_stack_trace(unsigned long *sp, unsigned long bp)
static void do_stack_trace(unsigned long *sp, unsigned long bp)
{
int reliable;
unsigned long addr;
......@@ -94,5 +94,5 @@ void show_stack(struct task_struct *task, unsigned long *stack)
}
printk(KERN_CONT "\n");
print_stack_trace(sp, bp);
do_stack_trace(sp, bp);
}
arch/x86/Makefile
浏览文件 @ 13ccb93f
......@@ -31,6 +31,9 @@ ifeq ($(CONFIG_X86_32),y)
KBUILD_CFLAGS += -msoft-float -mregparm=3 -freg-struct-return
# Don't autogenerate SSE instructions
KBUILD_CFLAGS += -mno-sse
# Never want PIC in a 32-bit kernel, prevent breakage with GCC built
# with nonstandard options
KBUILD_CFLAGS += -fno-pic
......@@ -57,8 +60,11 @@ else
KBUILD_AFLAGS += -m64
KBUILD_CFLAGS += -m64
# Don't autogenerate SSE instructions
KBUILD_CFLAGS += -mno-sse
# Use -mpreferred-stack-boundary=3 if supported.
KBUILD_CFLAGS += $(call cc-option,-mno-sse -mpreferred-stack-boundary=3)
KBUILD_CFLAGS += $(call cc-option,-mpreferred-stack-boundary=3)
# FIXME - should be integrated in Makefile.cpu (Makefile_32.cpu)
cflags-$(CONFIG_MK8) += $(call cc-option,-march=k8)
......
arch/x86/include/asm/atomic.h
浏览文件 @ 13ccb93f
......@@ -77,7 +77,7 @@ static inline void atomic_sub(int i, atomic_t *v)
*/
static inline int atomic_sub_and_test(int i, atomic_t *v)
{
GEN_BINARY_RMWcc(LOCK_PREFIX "subl", v->counter, i, "%0", "e");
GEN_BINARY_RMWcc(LOCK_PREFIX "subl", v->counter, "er", i, "%0", "e");
}
/**
......@@ -141,7 +141,7 @@ static inline int atomic_inc_and_test(atomic_t *v)
*/
static inline int atomic_add_negative(int i, atomic_t *v)
{
GEN_BINARY_RMWcc(LOCK_PREFIX "addl", v->counter, i, "%0", "s");
GEN_BINARY_RMWcc(LOCK_PREFIX "addl", v->counter, "er", i, "%0", "s");
}
/**
......
arch/x86/include/asm/atomic64_64.h
浏览文件 @ 13ccb93f
......@@ -72,7 +72,7 @@ static inline void atomic64_sub(long i, atomic64_t *v)
*/
static inline int atomic64_sub_and_test(long i, atomic64_t *v)
{
GEN_BINARY_RMWcc(LOCK_PREFIX "subq", v->counter, i, "%0", "e");
GEN_BINARY_RMWcc(LOCK_PREFIX "subq", v->counter, "er", i, "%0", "e");
}
/**
......@@ -138,7 +138,7 @@ static inline int atomic64_inc_and_test(atomic64_t *v)
*/
static inline int atomic64_add_negative(long i, atomic64_t *v)
{
GEN_BINARY_RMWcc(LOCK_PREFIX "addq", v->counter, i, "%0", "s");
GEN_BINARY_RMWcc(LOCK_PREFIX "addq", v->counter, "er", i, "%0", "s");
}
/**
......
arch/x86/include/asm/bitops.h
浏览文件 @ 13ccb93f
......@@ -205,7 +205,7 @@ static inline void change_bit(long nr, volatile unsigned long *addr)
*/
static inline int test_and_set_bit(long nr, volatile unsigned long *addr)
{
GEN_BINARY_RMWcc(LOCK_PREFIX "bts", *addr, nr, "%0", "c");
GEN_BINARY_RMWcc(LOCK_PREFIX "bts", *addr, "Ir", nr, "%0", "c");
}
/**
......@@ -251,7 +251,7 @@ static inline int __test_and_set_bit(long nr, volatile unsigned long *addr)
*/
static inline int test_and_clear_bit(long nr, volatile unsigned long *addr)
{
GEN_BINARY_RMWcc(LOCK_PREFIX "btr", *addr, nr, "%0", "c");
GEN_BINARY_RMWcc(LOCK_PREFIX "btr", *addr, "Ir", nr, "%0", "c");
}
/**
......@@ -304,7 +304,7 @@ static inline int __test_and_change_bit(long nr, volatile unsigned long *addr)
*/
static inline int test_and_change_bit(long nr, volatile unsigned long *addr)
{
GEN_BINARY_RMWcc(LOCK_PREFIX "btc", *addr, nr, "%0", "c");
GEN_BINARY_RMWcc(LOCK_PREFIX "btc", *addr, "Ir", nr, "%0", "c");
}
static __always_inline int constant_test_bit(long nr, const volatile unsigned long *addr)
......
arch/x86/include/asm/local.h
浏览文件 @ 13ccb93f
......@@ -52,7 +52,7 @@ static inline void local_sub(long i, local_t *l)
*/
static inline int local_sub_and_test(long i, local_t *l)
{
GEN_BINARY_RMWcc(_ASM_SUB, l->a.counter, i, "%0", "e");
GEN_BINARY_RMWcc(_ASM_SUB, l->a.counter, "er", i, "%0", "e");
}
/**
......@@ -92,7 +92,7 @@ static inline int local_inc_and_test(local_t *l)
*/
static inline int local_add_negative(long i, local_t *l)
{
GEN_BINARY_RMWcc(_ASM_ADD, l->a.counter, i, "%0", "s");
GEN_BINARY_RMWcc(_ASM_ADD, l->a.counter, "er", i, "%0", "s");
}
/**
......
arch/x86/include/asm/rmwcc.h
浏览文件 @ 13ccb93f
......@@ -16,8 +16,8 @@ cc_label: \
#define GEN_UNARY_RMWcc(op, var, arg0, cc) \
__GEN_RMWcc(op " " arg0, var, cc)
#define GEN_BINARY_RMWcc(op, var, val, arg0, cc) \
__GEN_RMWcc(op " %1, " arg0, var, cc, "er" (val))
#define GEN_BINARY_RMWcc(op, var, vcon, val, arg0, cc) \
__GEN_RMWcc(op " %1, " arg0, var, cc, vcon (val))
#else /* !CC_HAVE_ASM_GOTO */
......@@ -33,8 +33,8 @@ do { \
#define GEN_UNARY_RMWcc(op, var, arg0, cc) \
__GEN_RMWcc(op " " arg0, var, cc)
#define GEN_BINARY_RMWcc(op, var, val, arg0, cc) \
__GEN_RMWcc(op " %2, " arg0, var, cc, "er" (val))
#define GEN_BINARY_RMWcc(op, var, vcon, val, arg0, cc) \
__GEN_RMWcc(op " %2, " arg0, var, cc, vcon (val))
#endif /* CC_HAVE_ASM_GOTO */
......
arch/x86/include/asm/trace/irq_vectors.h
浏览文件 @ 13ccb93f
......@@ -71,6 +71,17 @@ DEFINE_IRQ_VECTOR_EVENT(x86_platform_ipi);
*/
DEFINE_IRQ_VECTOR_EVENT(irq_work);
/*
* We must dis-allow sampling irq_work_exit() because perf event sampling
* itself can cause irq_work, which would lead to an infinite loop;
*
* 1) irq_work_exit happens
* 2) generates perf sample
* 3) generates irq_work
* 4) goto 1
*/
TRACE_EVENT_PERF_PERM(irq_work_exit, is_sampling_event(p_event) ? -EPERM : 0);
/*
* call_function - called when entering/exiting a call function interrupt
* vector handler
......
arch/x86/kernel/reboot.c
浏览文件 @ 13ccb93f
......@@ -558,6 +558,17 @@ void native_machine_shutdown(void)
{
/* Stop the cpus and apics */
#ifdef CONFIG_X86_IO_APIC
/*
* Disabling IO APIC before local APIC is a workaround for
* erratum AVR31 in "Intel Atom Processor C2000 Product Family
* Specification Update". In this situation, interrupts that target
* a Logical Processor whose Local APIC is either in the process of
* being hardware disabled or software disabled are neither delivered
* nor discarded. When this erratum occurs, the processor may hang.
*
* Even without the erratum, it still makes sense to quiet IO APIC
* before disabling Local APIC.
*/
disable_IO_APIC();
#endif
......
arch/x86/platform/efi/early_printk.c
浏览文件 @ 13ccb93f
......@@ -142,7 +142,7 @@ early_efi_write(struct console *con, const char *str, unsigned int num)
efi_y += font->height;
}
if (efi_y + font->height >= si->lfb_height) {
if (efi_y + font->height > si->lfb_height) {
u32 i;
efi_y -= font->height;
......
block/blk-cgroup.h
浏览文件 @ 13ccb93f
......@@ -435,9 +435,9 @@ static inline uint64_t blkg_stat_read(struct blkg_stat *stat)
uint64_t v;
do {
start = u64_stats_fetch_begin(&stat->syncp);
start = u64_stats_fetch_begin_bh(&stat->syncp);
v = stat->cnt;
} while (u64_stats_fetch_retry(&stat->syncp, start));
} while (u64_stats_fetch_retry_bh(&stat->syncp, start));
return v;
}
......@@ -508,9 +508,9 @@ static inline struct blkg_rwstat blkg_rwstat_read(struct blkg_rwstat *rwstat)
struct blkg_rwstat tmp;
do {
start = u64_stats_fetch_begin(&rwstat->syncp);
start = u64_stats_fetch_begin_bh(&rwstat->syncp);
tmp = *rwstat;
} while (u64_stats_fetch_retry(&rwstat->syncp, start));
} while (u64_stats_fetch_retry_bh(&rwstat->syncp, start));
return tmp;
}
......
block/blk-flush.c
浏览文件 @ 13ccb93f
......@@ -502,15 +502,6 @@ void blk_abort_flushes(struct request_queue *q)
}
}
static void bio_end_flush(struct bio *bio, int err)
{
if (err)
clear_bit(BIO_UPTODATE, &bio->bi_flags);
if (bio->bi_private)
complete(bio->bi_private);
bio_put(bio);
}
/**
* blkdev_issue_flush - queue a flush
* @bdev: blockdev to issue flush for
......@@ -526,7 +517,6 @@ static void bio_end_flush(struct bio *bio, int err)
int blkdev_issue_flush(struct block_device *bdev, gfp_t gfp_mask,
sector_t *error_sector)
{
DECLARE_COMPLETION_ONSTACK(wait);
struct request_queue *q;
struct bio *bio;
int ret = 0;
......@@ -548,13 +538,9 @@ int blkdev_issue_flush(struct block_device *bdev, gfp_t gfp_mask,
return -ENXIO;
bio = bio_alloc(gfp_mask, 0);
bio->bi_end_io = bio_end_flush;
bio->bi_bdev = bdev;
bio->bi_private = &wait;
bio_get(bio);
submit_bio(WRITE_FLUSH, bio);
wait_for_completion_io(&wait);
ret = submit_bio_wait(WRITE_FLUSH, bio);
/*
* The driver must store the error location in ->bi_sector, if
......@@ -564,9 +550,6 @@ int blkdev_issue_flush(struct block_device *bdev, gfp_t gfp_mask,
if (error_sector)
*error_sector = bio->bi_sector;
if (!bio_flagged(bio, BIO_UPTODATE))
ret = -EIO;
bio_put(bio);
return ret;
}
......
block/blk-mq.c
浏览文件 @ 13ccb93f
......@@ -202,10 +202,12 @@ static struct request *blk_mq_alloc_request_pinned(struct request_queue *q,
if (rq) {
blk_mq_rq_ctx_init(q, ctx, rq, rw);
break;
} else if (!(gfp & __GFP_WAIT))
break;
}
blk_mq_put_ctx(ctx);
if (!(gfp & __GFP_WAIT))
break;
__blk_mq_run_hw_queue(hctx);
blk_mq_wait_for_tags(hctx->tags);
} while (1);
......@@ -222,7 +224,8 @@ struct request *blk_mq_alloc_request(struct request_queue *q, int rw,
return NULL;
rq = blk_mq_alloc_request_pinned(q, rw, gfp, reserved);
blk_mq_put_ctx(rq->mq_ctx);
if (rq)
blk_mq_put_ctx(rq->mq_ctx);
return rq;
}
......@@ -235,7 +238,8 @@ struct request *blk_mq_alloc_reserved_request(struct request_queue *q, int rw,
return NULL;
rq = blk_mq_alloc_request_pinned(q, rw, gfp, true);
blk_mq_put_ctx(rq->mq_ctx);
if (rq)
blk_mq_put_ctx(rq->mq_ctx);
return rq;
}
EXPORT_SYMBOL(blk_mq_alloc_reserved_request);
......@@ -308,12 +312,12 @@ void blk_mq_complete_request(struct request *rq, int error)
blk_account_io_completion(rq, bytes);
blk_account_io_done(rq);
if (rq->end_io)
rq->end_io(rq, error);
else
blk_mq_free_request(rq);
blk_account_io_done(rq);
}
void __blk_mq_end_io(struct request *rq, int error)
......
crypto/algif_hash.c
浏览文件 @ 13ccb93f
......@@ -114,6 +114,9 @@ static ssize_t hash_sendpage(struct socket *sock, struct page *page,
struct hash_ctx *ctx = ask->private;
int err;
if (flags & MSG_SENDPAGE_NOTLAST)
flags |= MSG_MORE;
lock_sock(sk);
sg_init_table(ctx->sgl.sg, 1);
sg_set_page(ctx->sgl.sg, page, size, offset);
......
crypto/algif_skcipher.c
浏览文件 @ 13ccb93f
......@@ -378,6 +378,9 @@ static ssize_t skcipher_sendpage(struct socket *sock, struct page *page,
struct skcipher_sg_list *sgl;
int err = -EINVAL;
if (flags & MSG_SENDPAGE_NOTLAST)
flags |= MSG_MORE;
lock_sock(sk);
if (!ctx->more && ctx->used)
goto unlock;
......
crypto/authenc.c
浏览文件 @ 13ccb93f
......@@ -380,9 +380,10 @@ static void crypto_authenc_encrypt_done(struct crypto_async_request *req,
if (!err) {
struct crypto_aead *authenc = crypto_aead_reqtfm(areq);
struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc);
struct ablkcipher_request *abreq = aead_request_ctx(areq);
u8 *iv = (u8 *)(abreq + 1) +
crypto_ablkcipher_reqsize(ctx->enc);
struct authenc_request_ctx *areq_ctx = aead_request_ctx(areq);
struct ablkcipher_request *abreq = (void *)(areq_ctx->tail
+ ctx->reqoff);
u8 *iv = (u8 *)abreq - crypto_ablkcipher_ivsize(ctx->enc);
err = crypto_authenc_genicv(areq, iv, 0);
}
......
crypto/ccm.c
浏览文件 @ 13ccb93f
......@@ -271,7 +271,8 @@ static int crypto_ccm_auth(struct aead_request *req, struct scatterlist *plain,
}
/* compute plaintext into mac */
get_data_to_compute(cipher, pctx, plain, cryptlen);
if (cryptlen)
get_data_to_compute(cipher, pctx, plain, cryptlen);
out:
return err;
......
crypto/tcrypt.c
浏览文件 @ 13ccb93f
......@@ -1242,6 +1242,10 @@ static int do_test(int m)
ret += tcrypt_test("cmac(des3_ede)");
break;
case 155:
ret += tcrypt_test("authenc(hmac(sha1),cbc(aes))");
break;
case 200:
test_cipher_speed("ecb(aes)", ENCRYPT, sec, NULL, 0,
speed_template_16_24_32);
......
crypto/testmgr.c
浏览文件 @ 13ccb93f
......@@ -503,16 +503,16 @@ static int __test_aead(struct crypto_aead *tfm, int enc,
goto out;
}
sg_init_one(&sg[0], input,
template[i].ilen + (enc ? authsize : 0));
if (diff_dst) {
output = xoutbuf[0];
output += align_offset;
sg_init_one(&sg[0], input, template[i].ilen);
sg_init_one(&sgout[0], output,
template[i].rlen);
} else {
sg_init_one(&sg[0], input,
template[i].ilen +
(enc ? authsize : 0));
} else {
output = input;
}
......@@ -612,12 +612,6 @@ static int __test_aead(struct crypto_aead *tfm, int enc,
memcpy(q, template[i].input + temp,
template[i].tap[k]);
n = template[i].tap[k];
if (k == template[i].np - 1 && enc)
n += authsize;
if (offset_in_page(q) + n < PAGE_SIZE)
q[n] = 0;
sg_set_buf(&sg[k], q, template[i].tap[k]);
if (diff_dst) {
......@@ -625,13 +619,17 @@ static int __test_aead(struct crypto_aead *tfm, int enc,
offset_in_page(IDX[k]);
memset(q, 0, template[i].tap[k]);
if (offset_in_page(q) + n < PAGE_SIZE)
q[n] = 0;
sg_set_buf(&sgout[k], q,
template[i].tap[k]);
}
n = template[i].tap[k];
if (k == template[i].np - 1 && enc)
n += authsize;
if (offset_in_page(q) + n < PAGE_SIZE)
q[n] = 0;
temp += template[i].tap[k];
}
......@@ -650,10 +648,10 @@ static int __test_aead(struct crypto_aead *tfm, int enc,
goto out;
}
sg[k - 1].length += authsize;
if (diff_dst)
sgout[k - 1].length += authsize;
else
sg[k - 1].length += authsize;
}
sg_init_table(asg, template[i].anp);
......
drivers/ata/libata-scsi.c
浏览文件 @ 13ccb93f
......@@ -3625,6 +3625,7 @@ int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht)
shost->max_lun = 1;
shost->max_channel = 1;
shost->max_cmd_len = 16;
shost->no_write_same = 1;
/* Schedule policy is determined by ->qc_defer()
* callback and it needs to see every deferred qc.
......
drivers/base/power/main.c
浏览文件 @ 13ccb93f
......@@ -29,6 +29,7 @@
#include <linux/async.h>
#include <linux/suspend.h>
#include <trace/events/power.h>
#include <linux/cpufreq.h>
#include <linux/cpuidle.h>
#include <linux/timer.h>
......@@ -540,6 +541,7 @@ static void dpm_resume_noirq(pm_message_t state)
dpm_show_time(starttime, state, "noirq");
resume_device_irqs();
cpuidle_resume();
cpufreq_resume();
}
/**
......@@ -955,6 +957,7 @@ static int dpm_suspend_noirq(pm_message_t state)
ktime_t starttime = ktime_get();
int error = 0;
cpufreq_suspend();
cpuidle_pause();
suspend_device_irqs();
mutex_lock(&dpm_list_mtx);
......
drivers/block/xen-blkfront.c
浏览文件 @ 13ccb93f
......@@ -489,7 +489,7 @@ static int blkif_queue_request(struct request *req)
if ((ring_req->operation == BLKIF_OP_INDIRECT) &&
(i % SEGS_PER_INDIRECT_FRAME == 0)) {
unsigned long pfn;
unsigned long uninitialized_var(pfn);
if (segments)
kunmap_atomic(segments);
......@@ -2011,6 +2011,10 @@ static void blkif_release(struct gendisk *disk, fmode_t mode)
bdev = bdget_disk(disk, 0);
if (!bdev) {
WARN(1, "Block device %s yanked out from us!\n", disk->disk_name);
goto out_mutex;
}
if (bdev->bd_openers)
goto out;
......@@ -2041,6 +2045,7 @@ static void blkif_release(struct gendisk *disk, fmode_t mode)
out:
bdput(bdev);
out_mutex:
mutex_unlock(&blkfront_mutex);
}
......
drivers/clocksource/Kconfig
浏览文件 @ 13ccb93f
......@@ -87,6 +87,7 @@ config ARM_ARCH_TIMER
config ARM_ARCH_TIMER_EVTSTREAM
bool "Support for ARM architected timer event stream generation"
default y if ARM_ARCH_TIMER
depends on ARM_ARCH_TIMER
help
This option enables support for event stream generation based on
the ARM architected timer. It is used for waking up CPUs executing
......
drivers/clocksource/sh_mtu2.c
浏览文件 @ 13ccb93f
......@@ -313,8 +313,20 @@ static int sh_mtu2_setup(struct sh_mtu2_priv *p, struct platform_device *pdev)
goto err1;
}
return sh_mtu2_register(p, (char *)dev_name(&p->pdev->dev),
cfg->clockevent_rating);
ret = clk_prepare(p->clk);
if (ret < 0)
goto err2;
ret = sh_mtu2_register(p, (char *)dev_name(&p->pdev->dev),
cfg->clockevent_rating);
if (ret < 0)
goto err3;
return 0;
err3:
clk_unprepare(p->clk);
err2:
clk_put(p->clk);
err1:
iounmap(p->mapbase);
err0:
......
drivers/clocksource/sh_tmu.c
浏览文件 @ 13ccb93f
......@@ -472,12 +472,26 @@ static int sh_tmu_setup(struct sh_tmu_priv *p, struct platform_device *pdev)
ret = PTR_ERR(p->clk);
goto err1;
}
ret = clk_prepare(p->clk);
if (ret < 0)
goto err2;
p->cs_enabled = false;
p->enable_count = 0;
return sh_tmu_register(p, (char *)dev_name(&p->pdev->dev),
cfg->clockevent_rating,
cfg->clocksource_rating);
ret = sh_tmu_register(p, (char *)dev_name(&p->pdev->dev),
cfg->clockevent_rating,
cfg->clocksource_rating);
if (ret < 0)
goto err3;
return 0;
err3:
clk_unprepare(p->clk);
err2:
clk_put(p->clk);
err1:
iounmap(p->mapbase);
err0:
......
drivers/cpufreq/cpufreq.c
浏览文件 @ 13ccb93f
......@@ -26,6 +26,7 @@
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/slab.h>
#include <linux/suspend.h>
#include <linux/syscore_ops.h>
#include <linux/tick.h>
#include <trace/events/power.h>
......@@ -47,6 +48,9 @@ static LIST_HEAD(cpufreq_policy_list);
static DEFINE_PER_CPU(char[CPUFREQ_NAME_LEN], cpufreq_cpu_governor);
#endif
/* Flag to suspend/resume CPUFreq governors */
static bool cpufreq_suspended;
static inline bool has_target(void)
{
return cpufreq_driver->target_index || cpufreq_driver->target;
......@@ -1462,6 +1466,41 @@ static struct subsys_interface cpufreq_interface = {
.remove_dev = cpufreq_remove_dev,
};
void cpufreq_suspend(void)
{
struct cpufreq_policy *policy;
if (!has_target())
return;
pr_debug("%s: Suspending Governors\n", __func__);
list_for_each_entry(policy, &cpufreq_policy_list, policy_list)
if (__cpufreq_governor(policy, CPUFREQ_GOV_STOP))
pr_err("%s: Failed to stop governor for policy: %p\n",
__func__, policy);
cpufreq_suspended = true;
}
void cpufreq_resume(void)
{
struct cpufreq_policy *policy;
if (!has_target())
return;
pr_debug("%s: Resuming Governors\n", __func__);
cpufreq_suspended = false;
list_for_each_entry(policy, &cpufreq_policy_list, policy_list)
if (__cpufreq_governor(policy, CPUFREQ_GOV_START)
|| __cpufreq_governor(policy, CPUFREQ_GOV_LIMITS))
pr_err("%s: Failed to start governor for policy: %p\n",
__func__, policy);
}
/**
* cpufreq_bp_suspend - Prepare the boot CPU for system suspend.
*
......@@ -1764,6 +1803,10 @@ static int __cpufreq_governor(struct cpufreq_policy *policy,
struct cpufreq_governor *gov = NULL;
#endif
/* Don't start any governor operations if we are entering suspend */
if (cpufreq_suspended)
return 0;
if (policy->governor->max_transition_latency &&
policy->cpuinfo.transition_latency >
policy->governor->max_transition_latency) {
......@@ -2076,9 +2119,6 @@ static int cpufreq_cpu_callback(struct notifier_block *nfb,
dev = get_cpu_device(cpu);
if (dev) {
if (action & CPU_TASKS_FROZEN)
frozen = true;
switch (action & ~CPU_TASKS_FROZEN) {
case CPU_ONLINE:
__cpufreq_add_dev(dev, NULL, frozen);
......
drivers/cpuidle/cpuidle.c
浏览文件 @ 13ccb93f
......@@ -400,7 +400,7 @@ EXPORT_SYMBOL_GPL(cpuidle_register_device);
*/
void cpuidle_unregister_device(struct cpuidle_device *dev)
{
if (dev->registered == 0)
if (!dev || dev->registered == 0)
return;
cpuidle_pause_and_lock();
......
drivers/crypto/caam/caamalg.c
浏览文件 @ 13ccb93f
......@@ -818,7 +818,7 @@ static void aead_decrypt_done(struct device *jrdev, u32 *desc, u32 err,
ivsize, 1);
print_hex_dump(KERN_ERR, "dst @"__stringify(__LINE__)": ",
DUMP_PREFIX_ADDRESS, 16, 4, sg_virt(req->dst),
req->cryptlen, 1);
req->cryptlen - ctx->authsize, 1);
#endif
if (err) {
......@@ -972,12 +972,9 @@ static void init_aead_job(u32 *sh_desc, dma_addr_t ptr,
(edesc->src_nents ? : 1);
in_options = LDST_SGF;
}
if (encrypt)
append_seq_in_ptr(desc, src_dma, req->assoclen + ivsize +
req->cryptlen - authsize, in_options);
else
append_seq_in_ptr(desc, src_dma, req->assoclen + ivsize +
req->cryptlen, in_options);
append_seq_in_ptr(desc, src_dma, req->assoclen + ivsize + req->cryptlen,
in_options);
if (likely(req->src == req->dst)) {
if (all_contig) {
......@@ -998,7 +995,8 @@ static void init_aead_job(u32 *sh_desc, dma_addr_t ptr,
}
}
if (encrypt)
append_seq_out_ptr(desc, dst_dma, req->cryptlen, out_options);
append_seq_out_ptr(desc, dst_dma, req->cryptlen + authsize,
out_options);
else
append_seq_out_ptr(desc, dst_dma, req->cryptlen - authsize,
out_options);
......@@ -1048,8 +1046,8 @@ static void init_aead_giv_job(u32 *sh_desc, dma_addr_t ptr,
sec4_sg_index += edesc->assoc_nents + 1 + edesc->src_nents;
in_options = LDST_SGF;
}
append_seq_in_ptr(desc, src_dma, req->assoclen + ivsize +
req->cryptlen - authsize, in_options);
append_seq_in_ptr(desc, src_dma, req->assoclen + ivsize + req->cryptlen,
in_options);
if (contig & GIV_DST_CONTIG) {
dst_dma = edesc->iv_dma;
......@@ -1066,7 +1064,8 @@ static void init_aead_giv_job(u32 *sh_desc, dma_addr_t ptr,
}
}
append_seq_out_ptr(desc, dst_dma, ivsize + req->cryptlen, out_options);
append_seq_out_ptr(desc, dst_dma, ivsize + req->cryptlen + authsize,
out_options);
}
/*
......@@ -1130,7 +1129,8 @@ static void init_ablkcipher_job(u32 *sh_desc, dma_addr_t ptr,
* allocate and map the aead extended descriptor
*/
static struct aead_edesc *aead_edesc_alloc(struct aead_request *req,
int desc_bytes, bool *all_contig_ptr)
int desc_bytes, bool *all_contig_ptr,
bool encrypt)
{
struct crypto_aead *aead = crypto_aead_reqtfm(req);
struct caam_ctx *ctx = crypto_aead_ctx(aead);
......@@ -1145,12 +1145,22 @@ static struct aead_edesc *aead_edesc_alloc(struct aead_request *req,
bool assoc_chained = false, src_chained = false, dst_chained = false;
int ivsize = crypto_aead_ivsize(aead);
int sec4_sg_index, sec4_sg_len = 0, sec4_sg_bytes;
unsigned int authsize = ctx->authsize;
assoc_nents = sg_count(req->assoc, req->assoclen, &assoc_chained);
src_nents = sg_count(req->src, req->cryptlen, &src_chained);
if (unlikely(req->dst != req->src))
dst_nents = sg_count(req->dst, req->cryptlen, &dst_chained);
if (unlikely(req->dst != req->src)) {
src_nents = sg_count(req->src, req->cryptlen, &src_chained);
dst_nents = sg_count(req->dst,
req->cryptlen +
(encrypt ? authsize : (-authsize)),
&dst_chained);
} else {
src_nents = sg_count(req->src,
req->cryptlen +
(encrypt ? authsize : 0),
&src_chained);
}
sgc = dma_map_sg_chained(jrdev, req->assoc, assoc_nents ? : 1,
DMA_TO_DEVICE, assoc_chained);
......@@ -1234,11 +1244,9 @@ static int aead_encrypt(struct aead_request *req)
u32 *desc;
int ret = 0;
req->cryptlen += ctx->authsize;
/* allocate extended descriptor */
edesc = aead_edesc_alloc(req, DESC_JOB_IO_LEN *
CAAM_CMD_SZ, &all_contig);
CAAM_CMD_SZ, &all_contig, true);
if (IS_ERR(edesc))
return PTR_ERR(edesc);
......@@ -1275,7 +1283,7 @@ static int aead_decrypt(struct aead_request *req)
/* allocate extended descriptor */
edesc = aead_edesc_alloc(req, DESC_JOB_IO_LEN *
CAAM_CMD_SZ, &all_contig);
CAAM_CMD_SZ, &all_contig, false);
if (IS_ERR(edesc))
return PTR_ERR(edesc);
......@@ -1332,7 +1340,8 @@ static struct aead_edesc *aead_giv_edesc_alloc(struct aead_givcrypt_request
src_nents = sg_count(req->src, req->cryptlen, &src_chained);
if (unlikely(req->dst != req->src))
dst_nents = sg_count(req->dst, req->cryptlen, &dst_chained);
dst_nents = sg_count(req->dst, req->cryptlen + ctx->authsize,
&dst_chained);
sgc = dma_map_sg_chained(jrdev, req->assoc, assoc_nents ? : 1,
DMA_TO_DEVICE, assoc_chained);
......@@ -1426,8 +1435,6 @@ static int aead_givencrypt(struct aead_givcrypt_request *areq)
u32 *desc;
int ret = 0;
req->cryptlen += ctx->authsize;
/* allocate extended descriptor */
edesc = aead_giv_edesc_alloc(areq, DESC_JOB_IO_LEN *
CAAM_CMD_SZ, &contig);
......
drivers/crypto/caam/jr.c
浏览文件 @ 13ccb93f
......@@ -6,6 +6,7 @@
*/
#include <linux/of_irq.h>
#include <linux/of_address.h>
#include "compat.h"
#include "regs.h"
......
drivers/crypto/talitos.c
浏览文件 @ 13ccb93f
......@@ -790,7 +790,7 @@ static void ipsec_esp_unmap(struct device *dev,
if (edesc->assoc_chained)
talitos_unmap_sg_chain(dev, areq->assoc, DMA_TO_DEVICE);
else
else if (areq->assoclen)
/* assoc_nents counts also for IV in non-contiguous cases */
dma_unmap_sg(dev, areq->assoc,
edesc->assoc_nents ? edesc->assoc_nents - 1 : 1,
......@@ -973,7 +973,11 @@ static int ipsec_esp(struct talitos_edesc *edesc, struct aead_request *areq,
dma_sync_single_for_device(dev, edesc->dma_link_tbl,
edesc->dma_len, DMA_BIDIRECTIONAL);
} else {
to_talitos_ptr(&desc->ptr[1], sg_dma_address(areq->assoc));
if (areq->assoclen)
to_talitos_ptr(&desc->ptr[1],
sg_dma_address(areq->assoc));
else
to_talitos_ptr(&desc->ptr[1], edesc->iv_dma);
desc->ptr[1].j_extent = 0;
}
......@@ -1108,7 +1112,8 @@ static struct talitos_edesc *talitos_edesc_alloc(struct device *dev,
unsigned int authsize,
unsigned int ivsize,
int icv_stashing,
u32 cryptoflags)
u32 cryptoflags,
bool encrypt)
{
struct talitos_edesc *edesc;
int assoc_nents = 0, src_nents, dst_nents, alloc_len, dma_len;
......@@ -1122,10 +1127,10 @@ static struct talitos_edesc *talitos_edesc_alloc(struct device *dev,
return ERR_PTR(-EINVAL);
}
if (iv)
if (ivsize)
iv_dma = dma_map_single(dev, iv, ivsize, DMA_TO_DEVICE);
if (assoc) {
if (assoclen) {
/*
* Currently it is assumed that iv is provided whenever assoc
* is.
......@@ -1141,19 +1146,17 @@ static struct talitos_edesc *talitos_edesc_alloc(struct device *dev,
assoc_nents = assoc_nents ? assoc_nents + 1 : 2;
}
src_nents = sg_count(src, cryptlen + authsize, &src_chained);
src_nents = (src_nents == 1) ? 0 : src_nents;
if (!dst) {
dst_nents = 0;
} else {
if (dst == src) {
dst_nents = src_nents;
} else {
dst_nents = sg_count(dst, cryptlen + authsize,
&dst_chained);
dst_nents = (dst_nents == 1) ? 0 : dst_nents;
}
if (!dst || dst == src) {
src_nents = sg_count(src, cryptlen + authsize, &src_chained);
src_nents = (src_nents == 1) ? 0 : src_nents;
dst_nents = dst ? src_nents : 0;
} else { /* dst && dst != src*/
src_nents = sg_count(src, cryptlen + (encrypt ? 0 : authsize),
&src_chained);
src_nents = (src_nents == 1) ? 0 : src_nents;
dst_nents = sg_count(dst, cryptlen + (encrypt ? authsize : 0),
&dst_chained);
dst_nents = (dst_nents == 1) ? 0 : dst_nents;
}
/*
......@@ -1173,9 +1176,16 @@ static struct talitos_edesc *talitos_edesc_alloc(struct device *dev,
edesc = kmalloc(alloc_len, GFP_DMA | flags);
if (!edesc) {
talitos_unmap_sg_chain(dev, assoc, DMA_TO_DEVICE);
if (assoc_chained)
talitos_unmap_sg_chain(dev, assoc, DMA_TO_DEVICE);
else if (assoclen)
dma_unmap_sg(dev, assoc,
assoc_nents ? assoc_nents - 1 : 1,
DMA_TO_DEVICE);
if (iv_dma)
dma_unmap_single(dev, iv_dma, ivsize, DMA_TO_DEVICE);
dev_err(dev, "could not allocate edescriptor\n");
return ERR_PTR(-ENOMEM);
}
......@@ -1197,7 +1207,7 @@ static struct talitos_edesc *talitos_edesc_alloc(struct device *dev,
}
static struct talitos_edesc *aead_edesc_alloc(struct aead_request *areq, u8 *iv,
int icv_stashing)
int icv_stashing, bool encrypt)
{
struct crypto_aead *authenc = crypto_aead_reqtfm(areq);
struct talitos_ctx *ctx = crypto_aead_ctx(authenc);
......@@ -1206,7 +1216,7 @@ static struct talitos_edesc *aead_edesc_alloc(struct aead_request *areq, u8 *iv,
return talitos_edesc_alloc(ctx->dev, areq->assoc, areq->src, areq->dst,
iv, areq->assoclen, areq->cryptlen,
ctx->authsize, ivsize, icv_stashing,
areq->base.flags);
areq->base.flags, encrypt);
}
static int aead_encrypt(struct aead_request *req)
......@@ -1216,7 +1226,7 @@ static int aead_encrypt(struct aead_request *req)
struct talitos_edesc *edesc;
/* allocate extended descriptor */
edesc = aead_edesc_alloc(req, req->iv, 0);
edesc = aead_edesc_alloc(req, req->iv, 0, true);
if (IS_ERR(edesc))
return PTR_ERR(edesc);
......@@ -1239,7 +1249,7 @@ static int aead_decrypt(struct aead_request *req)
req->cryptlen -= authsize;
/* allocate extended descriptor */
edesc = aead_edesc_alloc(req, req->iv, 1);
edesc = aead_edesc_alloc(req, req->iv, 1, false);
if (IS_ERR(edesc))
return PTR_ERR(edesc);
......@@ -1285,7 +1295,7 @@ static int aead_givencrypt(struct aead_givcrypt_request *req)
struct talitos_edesc *edesc;
/* allocate extended descriptor */
edesc = aead_edesc_alloc(areq, req->giv, 0);
edesc = aead_edesc_alloc(areq, req->giv, 0, true);
if (IS_ERR(edesc))
return PTR_ERR(edesc);
......@@ -1441,7 +1451,7 @@ static int common_nonsnoop(struct talitos_edesc *edesc,
}
static struct talitos_edesc *ablkcipher_edesc_alloc(struct ablkcipher_request *
areq)
areq, bool encrypt)
{
struct crypto_ablkcipher *cipher = crypto_ablkcipher_reqtfm(areq);
struct talitos_ctx *ctx = crypto_ablkcipher_ctx(cipher);
......@@ -1449,7 +1459,7 @@ static struct talitos_edesc *ablkcipher_edesc_alloc(struct ablkcipher_request *
return talitos_edesc_alloc(ctx->dev, NULL, areq->src, areq->dst,
areq->info, 0, areq->nbytes, 0, ivsize, 0,
areq->base.flags);
areq->base.flags, encrypt);
}
static int ablkcipher_encrypt(struct ablkcipher_request *areq)
......@@ -1459,7 +1469,7 @@ static int ablkcipher_encrypt(struct ablkcipher_request *areq)
struct talitos_edesc *edesc;
/* allocate extended descriptor */
edesc = ablkcipher_edesc_alloc(areq);
edesc = ablkcipher_edesc_alloc(areq, true);
if (IS_ERR(edesc))
return PTR_ERR(edesc);
......@@ -1476,7 +1486,7 @@ static int ablkcipher_decrypt(struct ablkcipher_request *areq)
struct talitos_edesc *edesc;
/* allocate extended descriptor */
edesc = ablkcipher_edesc_alloc(areq);
edesc = ablkcipher_edesc_alloc(areq, false);
if (IS_ERR(edesc))
return PTR_ERR(edesc);
......@@ -1628,7 +1638,7 @@ static struct talitos_edesc *ahash_edesc_alloc(struct ahash_request *areq,
struct talitos_ahash_req_ctx *req_ctx = ahash_request_ctx(areq);
return talitos_edesc_alloc(ctx->dev, NULL, req_ctx->psrc, NULL, NULL, 0,
nbytes, 0, 0, 0, areq->base.flags);
nbytes, 0, 0, 0, areq->base.flags, false);
}
static int ahash_init(struct ahash_request *areq)
......
drivers/firewire/sbp2.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/firmware/efi/efi-pstore.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/firmware/efi/efivars.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/firmware/efi/vars.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/gpio/gpio-mpc8xxx.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/gpio/gpiolib.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/idle/intel_idle.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/irqchip/irq-gic.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/leds/leds-pwm.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/md/md.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/misc/enclosure.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/mmc/host/omap.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/net/bonding/bond_main.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/net/bonding/bond_options.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/net/bonding/bond_sysfs.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/net/bonding/bonding.h
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/net/can/c_can/c_can.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/net/can/flexcan.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/net/can/sja1000/sja1000.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/net/ethernet/broadcom/tg3.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/net/ethernet/sfc/mcdi.h
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/net/ethernet/sfc/mcdi_mon.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/net/ethernet/smsc/smc91x.h
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/net/macvtap.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/net/phy/vitesse.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/net/team/team.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/net/virtio_net.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/net/xen-netback/netback.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/pinctrl/pinctrl-abx500.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/pinctrl/pinctrl-abx500.h
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/pinctrl/pinctrl-rockchip.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/pinctrl/sh-pfc/pfc-sh7372.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/pnp/driver.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/powercap/powercap_sys.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/scsi/3w-9xxx.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/scsi/3w-sas.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/scsi/3w-xxxx.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/scsi/aacraid/linit.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/scsi/arcmsr/arcmsr_hba.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/scsi/bfa/bfa_fcs.h
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/scsi/bfa/bfa_fcs_lport.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/scsi/bfa/bfad_attr.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/scsi/gdth.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/scsi/hosts.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/scsi/hpsa.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/scsi/ipr.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/scsi/ips.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/scsi/libsas/sas_ata.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/scsi/megaraid.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/scsi/pm8001/pm8001_hwi.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/scsi/pm8001/pm8001_hwi.h
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/scsi/pm8001/pm8001_init.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/scsi/pm8001/pm8001_sas.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/scsi/pm8001/pm8001_sas.h
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/scsi/pm8001/pm80xx_hwi.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/scsi/pm8001/pm80xx_hwi.h
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/scsi/pmcraid.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/scsi/sd.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/scsi/storvsc_drv.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/spi/spi-bcm2835.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/spi/spi-bcm63xx.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/spi/spi-mpc512x-psc.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/spi/spi-mxs.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/spi/spi-pxa2xx.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/spi/spi-rspi.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/spi/spi-ti-qspi.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/spi/spi-txx9.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/spi/spi.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/uio/uio.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/video/atmel_lcdfb.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/video/kyro/fbdev.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/video/sh_mobile_meram.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/video/vt8500lcdfb.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/xen/grant-table.c
浏览文件 @ 13ccb93f
此差异已折叠。
drivers/xen/swiotlb-xen.c
浏览文件 @ 13ccb93f
此差异已折叠。
fs/aio.c
浏览文件 @ 13ccb93f
此差异已折叠。
fs/btrfs/check-integrity.c
浏览文件 @ 13ccb93f
此差异已折叠。
fs/btrfs/check-integrity.h
浏览文件 @ 13ccb93f
此差异已折叠。
fs/btrfs/extent_io.c
浏览文件 @ 13ccb93f
此差异已折叠。
fs/btrfs/scrub.c
浏览文件 @ 13ccb93f
此差异已折叠。
fs/eventpoll.c
浏览文件 @ 13ccb93f
此差异已折叠。
fs/hfsplus/wrapper.c
浏览文件 @ 13ccb93f
此差异已折叠。
fs/logfs/dev_bdev.c
浏览文件 @ 13ccb93f
此差异已折叠。
fs/nfs/blocklayout/blocklayout.h
浏览文件 @ 13ccb93f
此差异已折叠。
fs/nfs/blocklayout/extents.c
浏览文件 @ 13ccb93f
此差异已折叠。
fs/nfs/dns_resolve.c
浏览文件 @ 13ccb93f
此差异已折叠。
fs/nfs/inode.c
浏览文件 @ 13ccb93f
此差异已折叠。
fs/nfs/internal.h
浏览文件 @ 13ccb93f
此差异已折叠。
fs/nfs/nfs4_fs.h
浏览文件 @ 13ccb93f
此差异已折叠。
fs/nfs/nfs4proc.c
浏览文件 @ 13ccb93f
此差异已折叠。
fs/pipe.c
浏览文件 @ 13ccb93f
此差异已折叠。
fs/squashfs/file_direct.c
浏览文件 @ 13ccb93f
此差异已折叠。
include/crypto/scatterwalk.h
浏览文件 @ 13ccb93f
此差异已折叠。
include/linux/cpufreq.h
浏览文件 @ 13ccb93f
此差异已折叠。
include/linux/efi.h
浏览文件 @ 13ccb93f
此差异已折叠。
include/linux/ftrace_event.h
浏览文件 @ 13ccb93f
此差异已折叠。
include/linux/gpio/driver.h
浏览文件 @ 13ccb93f
此差异已折叠。
include/linux/irqreturn.h
浏览文件 @ 13ccb93f
此差异已折叠。
include/linux/nfs4.h
浏览文件 @ 13ccb93f
此差异已折叠。
include/linux/nfs_fs.h
浏览文件 @ 13ccb93f
此差异已折叠。
include/linux/sched.h
浏览文件 @ 13ccb93f
此差异已折叠。
include/linux/tracepoint.h
浏览文件 @ 13ccb93f
此差异已折叠。
include/net/ip.h
浏览文件 @ 13ccb93f
此差异已折叠。
include/net/ipv6.h
浏览文件 @ 13ccb93f
此差异已折叠。
include/net/ping.h
浏览文件 @ 13ccb93f
此差异已折叠。
include/net/sctp/structs.h
浏览文件 @ 13ccb93f
此差异已折叠。
include/scsi/scsi_host.h
浏览文件 @ 13ccb93f
此差异已折叠。
include/sound/soc-dapm.h
浏览文件 @ 13ccb93f
此差异已折叠。
include/trace/ftrace.h
浏览文件 @ 13ccb93f
此差异已折叠。
include/uapi/linux/eventpoll.h
浏览文件 @ 13ccb93f
此差异已折叠。
include/uapi/linux/genetlink.h
浏览文件 @ 13ccb93f
此差异已折叠。
include/uapi/linux/if_link.h
浏览文件 @ 13ccb93f
此差异已折叠。
include/uapi/linux/netlink_diag.h
浏览文件 @ 13ccb93f
此差异已折叠。
include/uapi/linux/packet_diag.h
浏览文件 @ 13ccb93f
此差异已折叠。
include/uapi/linux/unix_diag.h
浏览文件 @ 13ccb93f
此差异已折叠。
kernel/events/core.c
浏览文件 @ 13ccb93f
此差异已折叠。
kernel/irq/pm.c
浏览文件 @ 13ccb93f
此差异已折叠。
kernel/rcu/tree_plugin.h
浏览文件 @ 13ccb93f
此差异已折叠。
kernel/sched/core.c
浏览文件 @ 13ccb93f
此差异已折叠。
kernel/sched/fair.c
浏览文件 @ 13ccb93f
此差异已折叠。
kernel/time/tick-common.c
浏览文件 @ 13ccb93f
此差异已折叠。
kernel/time/tick-sched.c
浏览文件 @ 13ccb93f
此差异已折叠。
kernel/time/timekeeping.c
浏览文件 @ 13ccb93f
此差异已折叠。
kernel/timer.c
浏览文件 @ 13ccb93f
此差异已折叠。
kernel/trace/trace_event_perf.c
浏览文件 @ 13ccb93f
此差异已折叠。
kernel/trace/trace_events.c
浏览文件 @ 13ccb93f
此差异已折叠。
kernel/trace/trace_syscalls.c
浏览文件 @ 13ccb93f
此差异已折叠。
net/compat.c
浏览文件 @ 13ccb93f
此差异已折叠。
net/core/pktgen.c
浏览文件 @ 13ccb93f
此差异已折叠。
net/hsr/hsr_framereg.c
浏览文件 @ 13ccb93f
此差异已折叠。
net/hsr/hsr_netlink.c
浏览文件 @ 13ccb93f
此差异已折叠。
net/ipv4/ip_sockglue.c
浏览文件 @ 13ccb93f
此差异已折叠。
net/ipv4/ping.c
浏览文件 @ 13ccb93f
此差异已折叠。
net/ipv4/protocol.c
浏览文件 @ 13ccb93f
此差异已折叠。
net/ipv4/raw.c
浏览文件 @ 13ccb93f
此差异已折叠。
net/ipv4/tcp_ipv4.c
浏览文件 @ 13ccb93f
此差异已折叠。
net/ipv4/tcp_memcontrol.c
浏览文件 @ 13ccb93f
此差异已折叠。
net/ipv4/tcp_offload.c
浏览文件 @ 13ccb93f
此差异已折叠。
net/ipv4/udp.c
浏览文件 @ 13ccb93f
此差异已折叠。
net/ipv6/datagram.c
浏览文件 @ 13ccb93f
此差异已折叠。
net/ipv6/ip6_output.c
浏览文件 @ 13ccb93f
此差异已折叠。
net/ipv6/ping.c
浏览文件 @ 13ccb93f
此差异已折叠。
net/ipv6/protocol.c
浏览文件 @ 13ccb93f
此差异已折叠。
net/ipv6/raw.c
浏览文件 @ 13ccb93f
此差异已折叠。
net/ipv6/sit.c
浏览文件 @ 13ccb93f
此差异已折叠。
net/ipv6/tcpv6_offload.c
浏览文件 @ 13ccb93f
此差异已折叠。
net/ipv6/udp.c
浏览文件 @ 13ccb93f
此差异已折叠。
net/l2tp/l2tp_ip6.c
浏览文件 @ 13ccb93f
此差异已折叠。
net/netlink/genetlink.c
浏览文件 @ 13ccb93f
此差异已折叠。
net/packet/af_packet.c
浏览文件 @ 13ccb93f
此差异已折叠。
net/sched/sch_netem.c
浏览文件 @ 13ccb93f
此差异已折叠。
net/sched/sch_tbf.c
浏览文件 @ 13ccb93f
此差异已折叠。
net/sctp/output.c
浏览文件 @ 13ccb93f
此差异已折叠。
net/sctp/outqueue.c
浏览文件 @ 13ccb93f
此差异已折叠。
net/socket.c
浏览文件 @ 13ccb93f
此差异已折叠。
net/sunrpc/auth_gss/auth_gss.c
浏览文件 @ 13ccb93f
此差异已折叠。
scripts/recordmcount.pl
浏览文件 @ 13ccb93f
此差异已折叠。
security/integrity/ima/ima.h
浏览文件 @ 13ccb93f
此差异已折叠。
security/integrity/ima/ima_api.c
浏览文件 @ 13ccb93f
此差异已折叠。
security/integrity/ima/ima_init.c
浏览文件 @ 13ccb93f
此差异已折叠。
sound/atmel/abdac.c
浏览文件 @ 13ccb93f
此差异已折叠。
sound/firewire/dice.c
浏览文件 @ 13ccb93f
此差异已折叠。
sound/pci/hda/hda_intel.c
浏览文件 @ 13ccb93f
此差异已折叠。
sound/pci/hda/patch_analog.c
浏览文件 @ 13ccb93f
此差异已折叠。
sound/pci/hda/patch_hdmi.c
浏览文件 @ 13ccb93f
此差异已折叠。
sound/pci/hda/patch_realtek.c
浏览文件 @ 13ccb93f
此差异已折叠。
sound/soc/atmel/sam9x5_wm8731.c
浏览文件 @ 13ccb93f
此差异已折叠。
sound/soc/codecs/wm5110.c
浏览文件 @ 13ccb93f
此差异已折叠。
sound/soc/codecs/wm8731.c
浏览文件 @ 13ccb93f
此差异已折叠。
sound/soc/codecs/wm8990.c
浏览文件 @ 13ccb93f
此差异已折叠。
sound/soc/fsl/pcm030-audio-fabric.c
浏览文件 @ 13ccb93f
此差异已折叠。
sound/soc/kirkwood/kirkwood-i2s.c
浏览文件 @ 13ccb93f
此差异已折叠。
sound/soc/omap/n810.c
浏览文件 @ 13ccb93f
此差异已折叠。
sound/soc/sh/Kconfig
浏览文件 @ 13ccb93f
此差异已折叠。
sound/soc/soc-core.c
浏览文件 @ 13ccb93f
此差异已折叠。
sound/soc/soc-devres.c
浏览文件 @ 13ccb93f
此差异已折叠。
sound/soc/soc-pcm.c
浏览文件 @ 13ccb93f
此差异已折叠。
tools/lib/traceevent/event-parse.c
浏览文件 @ 13ccb93f
此差异已折叠。
tools/perf/util/header.c
浏览文件 @ 13ccb93f
此差异已折叠。
tools/perf/util/thread.c
浏览文件 @ 13ccb93f
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或