提交 1373c0fd 编写于 作者: S Steve Glendinning 提交者: David S. Miller

smsc911x: leave RX_STOP interrupt permanently enabled

smsc911x_set_multicast_list currently performs the only non-atomic
read-modify-write of INT_EN.  This patch permanently enables the
RXSTOP_INT interrupt, and changes the ISR to only conditionally run the
multicast filter workaround code.
Signed-off-by: NSteve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 a528079e
......@@ -1247,7 +1247,7 @@ static int smsc911x_open(struct net_device *dev)
napi_enable(&pdata->napi);
temp = smsc911x_reg_read(pdata, INT_EN);
temp |= (INT_EN_TDFA_EN_ | INT_EN_RSFL_EN_);
temp |= (INT_EN_TDFA_EN_ | INT_EN_RSFL_EN_ | INT_EN_RXSTOP_INT_EN_);
smsc911x_reg_write(pdata, INT_EN, temp);
spin_lock_irq(&pdata->mac_lock);
......@@ -1419,11 +1419,6 @@ static void smsc911x_set_multicast_list(struct net_device *dev)
/* Request the hardware to stop, then perform the
* update when we get an RX_STOP interrupt */
smsc911x_reg_write(pdata, INT_STS, INT_STS_RXSTOP_INT_);
temp = smsc911x_reg_read(pdata, INT_EN);
temp |= INT_EN_RXSTOP_INT_EN_;
smsc911x_reg_write(pdata, INT_EN, temp);
temp = smsc911x_mac_read(pdata, MAC_CR);
temp &= ~(MAC_CR_RXEN_);
smsc911x_mac_write(pdata, MAC_CR, temp);
......@@ -1462,11 +1457,9 @@ static irqreturn_t smsc911x_irqhandler(int irq, void *dev_id)
/* Called when there is a multicast update scheduled and
* it is now safe to complete the update */
SMSC_TRACE(INTR, "RX Stop interrupt");
temp = smsc911x_reg_read(pdata, INT_EN);
temp &= (~INT_EN_RXSTOP_INT_EN_);
smsc911x_reg_write(pdata, INT_EN, temp);
smsc911x_reg_write(pdata, INT_STS, INT_STS_RXSTOP_INT_);
smsc911x_rx_multicast_update_workaround(pdata);
if (pdata->multicast_update_pending)
smsc911x_rx_multicast_update_workaround(pdata);
serviced = IRQ_HANDLED;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册