[SCSI] aacraid: handle AIF hotplug events (update)

Received from Mark Salyzyn from Adaptec.

Hotplug sniffs the AIFs (events) from the adapter and if a container
change resulting in the device going offline (container zero), online
(container zero completed) or changing capacity (morph) it will take
actions by calling the appropriate API.
Signed-off-by: NMark Haverkamp <markh@osdl.org>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

drivers/scsi/aacraid/aachba.c

@@ -479,7 +479,7 @@ static int aac_get_container_name(struct scsi_cmnd * scsicmd, int cid)
  *	is updated in the struct fsa_dev_info structure rather than returned.
  */
  
-static int probe_container(struct aac_dev *dev, int cid)
+int probe_container(struct aac_dev *dev, int cid)
 {
 	struct fsa_dev_info *fsa_dev_ptr;
 	int status;
@@ -1471,6 +1471,8 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
 				case TEST_UNIT_READY:
 					spin_unlock_irq(host->host_lock);
 					probe_container(dev, cid);
+					if ((fsa_dev_ptr[cid].valid & 1) == 0)
+						fsa_dev_ptr[cid].valid = 0;
 					spin_lock_irq(host->host_lock);
 					if (fsa_dev_ptr[cid].valid == 0) {
 						scsicmd->result = DID_NO_CONNECT << 16;

drivers/scsi/aacraid/aacraid.h

@@ -780,7 +780,9 @@ struct fsa_dev_info {
 	u64		last;
 	u64		size;
 	u32		type;
+	u32		config_waiting_on;
 	u16		queue_depth;
+	u8		config_needed;
 	u8		valid;
 	u8		ro;
 	u8		locked;
@@ -1715,6 +1717,7 @@ extern struct aac_common aac_config;
 #define		AifCmdJobProgress	2	/* Progress report */
 #define			AifJobCtrZero	101	/* Array Zero progress */
 #define			AifJobStsSuccess 1	/* Job completes */
+#define			AifJobStsRunning 102	/* Job running */
 #define		AifCmdAPIReport		3	/* Report from other user of API */
 #define		AifCmdDriverNotify	4	/* Notify host driver of event */
 #define			AifDenMorphComplete 200	/* A morph operation completed */
@@ -1785,6 +1788,7 @@ int fib_adapter_complete(struct fib * fibptr, unsigned short size);
 struct aac_driver_ident* aac_get_driver_ident(int devtype);
 int aac_get_adapter_info(struct aac_dev* dev);
 int aac_send_shutdown(struct aac_dev *dev);
+int probe_container(struct aac_dev *dev, int cid);
 extern int numacb;
 extern int acbsize;
 extern char aac_driver_version[];

drivers/scsi/aacraid/commsup.c

@@ -39,6 +39,7 @@
 #include <linux/completion.h>
 #include <linux/blkdev.h>
 #include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
 #include <asm/semaphore.h>
 
 #include "aacraid.h"
@@ -791,6 +792,268 @@ void aac_printf(struct aac_dev *dev, u32 val)
 	memset(cp, 0,  256);
 }
 
+
+/**
+ *	aac_handle_aif		-	Handle a message from the firmware
+ *	@dev: Which adapter this fib is from
+ *	@fibptr: Pointer to fibptr from adapter
+ *
+ *	This routine handles a driver notify fib from the adapter and
+ *	dispatches it to the appropriate routine for handling.
+ */
+
+static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr)
+{
+	struct hw_fib * hw_fib = fibptr->hw_fib;
+	struct aac_aifcmd * aifcmd = (struct aac_aifcmd *)hw_fib->data;
+	int busy;
+	u32 container;
+	struct scsi_device *device;
+	enum {
+		NOTHING,
+		DELETE,
+		ADD,
+		CHANGE
+	} device_config_needed;
+
+	/* Sniff for container changes */
+
+	if (!dev)
+		return;
+	container = (u32)-1;
+
+	/*
+	 *	We have set this up to try and minimize the number of
+	 * re-configures that take place. As a result of this when
+	 * certain AIF's come in we will set a flag waiting for another
+	 * type of AIF before setting the re-config flag.
+	 */
+	switch (le32_to_cpu(aifcmd->command)) {
+	case AifCmdDriverNotify:
+		switch (le32_to_cpu(((u32 *)aifcmd->data)[0])) {
+		/*
+		 *	Morph or Expand complete
+		 */
+		case AifDenMorphComplete:
+		case AifDenVolumeExtendComplete:
+			container = le32_to_cpu(((u32 *)aifcmd->data)[1]);
+			if (container >= dev->maximum_num_containers)
+				break;
+
+			/*
+			 *	Find the Scsi_Device associated with the SCSI
+			 * address. Make sure we have the right array, and if
+			 * so set the flag to initiate a new re-config once we
+			 * see an AifEnConfigChange AIF come through.
+			 */
+
+			if ((dev != NULL) && (dev->scsi_host_ptr != NULL)) {
+				device = scsi_device_lookup(dev->scsi_host_ptr, 
+					CONTAINER_TO_CHANNEL(container), 
+					CONTAINER_TO_ID(container), 
+					CONTAINER_TO_LUN(container));
+				if (device) {
+					dev->fsa_dev[container].config_needed = CHANGE;
+					dev->fsa_dev[container].config_waiting_on = AifEnConfigChange;
+					scsi_device_put(device);
+				}
+			}
+		}
+
+		/*
+		 *	If we are waiting on something and this happens to be
+		 * that thing then set the re-configure flag.
+		 */
+		if (container != (u32)-1) {
+			if (container >= dev->maximum_num_containers)
+				break;
+			if (dev->fsa_dev[container].config_waiting_on ==
+			    le32_to_cpu(*(u32 *)aifcmd->data))
+				dev->fsa_dev[container].config_waiting_on = 0;
+		} else for (container = 0;
+		    container < dev->maximum_num_containers; ++container) {
+			if (dev->fsa_dev[container].config_waiting_on ==
+			    le32_to_cpu(*(u32 *)aifcmd->data))
+				dev->fsa_dev[container].config_waiting_on = 0;
+		}
+		break;
+
+	case AifCmdEventNotify:
+		switch (le32_to_cpu(((u32 *)aifcmd->data)[0])) {
+		/*
+		 *	Add an Array.
+		 */
+		case AifEnAddContainer:
+			container = le32_to_cpu(((u32 *)aifcmd->data)[1]);
+			if (container >= dev->maximum_num_containers)
+				break;
+			dev->fsa_dev[container].config_needed = ADD;
+			dev->fsa_dev[container].config_waiting_on =
+				AifEnConfigChange;
+			break;
+
+		/*
+		 *	Delete an Array.
+		 */
+		case AifEnDeleteContainer:
+			container = le32_to_cpu(((u32 *)aifcmd->data)[1]);
+			if (container >= dev->maximum_num_containers)
+				break;
+			dev->fsa_dev[container].config_needed = DELETE;
+			dev->fsa_dev[container].config_waiting_on =
+				AifEnConfigChange;
+			break;
+
+		/*
+		 *	Container change detected. If we currently are not
+		 * waiting on something else, setup to wait on a Config Change.
+		 */
+		case AifEnContainerChange:
+			container = le32_to_cpu(((u32 *)aifcmd->data)[1]);
+			if (container >= dev->maximum_num_containers)
+				break;
+			if (dev->fsa_dev[container].config_waiting_on)
+				break;
+			dev->fsa_dev[container].config_needed = CHANGE;
+			dev->fsa_dev[container].config_waiting_on =
+				AifEnConfigChange;
+			break;
+
+		case AifEnConfigChange:
+			break;
+
+		}
+
+		/*
+		 *	If we are waiting on something and this happens to be
+		 * that thing then set the re-configure flag.
+		 */
+		if (container != (u32)-1) {
+			if (container >= dev->maximum_num_containers)
+				break;
+			if (dev->fsa_dev[container].config_waiting_on ==
+			    le32_to_cpu(*(u32 *)aifcmd->data))
+				dev->fsa_dev[container].config_waiting_on = 0;
+		} else for (container = 0;
+		    container < dev->maximum_num_containers; ++container) {
+			if (dev->fsa_dev[container].config_waiting_on ==
+			    le32_to_cpu(*(u32 *)aifcmd->data))
+				dev->fsa_dev[container].config_waiting_on = 0;
+		}
+		break;
+
+	case AifCmdJobProgress:
+		/*
+		 *	These are job progress AIF's. When a Clear is being
+		 * done on a container it is initially created then hidden from
+		 * the OS. When the clear completes we don't get a config
+		 * change so we monitor the job status complete on a clear then
+		 * wait for a container change.
+		 */
+
+		if ((((u32 *)aifcmd->data)[1] == cpu_to_le32(AifJobCtrZero))
+		 && ((((u32 *)aifcmd->data)[6] == ((u32 *)aifcmd->data)[5])
+		  || (((u32 *)aifcmd->data)[4] == cpu_to_le32(AifJobStsSuccess)))) {
+			for (container = 0;
+			    container < dev->maximum_num_containers;
+			    ++container) {
+				/*
+				 * Stomp on all config sequencing for all
+				 * containers?
+				 */
+				dev->fsa_dev[container].config_waiting_on =
+					AifEnContainerChange;
+				dev->fsa_dev[container].config_needed = ADD;
+			}
+		}
+		if ((((u32 *)aifcmd->data)[1] == cpu_to_le32(AifJobCtrZero))
+		 && (((u32 *)aifcmd->data)[6] == 0)
+		 && (((u32 *)aifcmd->data)[4] == cpu_to_le32(AifJobStsRunning))) {
+			for (container = 0;
+			    container < dev->maximum_num_containers;
+			    ++container) {
+				/*
+				 * Stomp on all config sequencing for all
+				 * containers?
+				 */
+				dev->fsa_dev[container].config_waiting_on =
+					AifEnContainerChange;
+				dev->fsa_dev[container].config_needed = DELETE;
+			}
+		}
+		break;
+	}
+
+	device_config_needed = NOTHING;
+	for (container = 0; container < dev->maximum_num_containers;
+	    ++container) {
+		if ((dev->fsa_dev[container].config_waiting_on == 0)
+		 && (dev->fsa_dev[container].config_needed != NOTHING)) {
+			device_config_needed =
+				dev->fsa_dev[container].config_needed;
+			dev->fsa_dev[container].config_needed = NOTHING;
+			break;
+		}
+	}
+	if (device_config_needed == NOTHING)
+		return;
+
+	/*
+	 *	If we decided that a re-configuration needs to be done,
+	 * schedule it here on the way out the door, please close the door
+	 * behind you.
+	 */
+
+	busy = 0;
+
+
+	/*
+	 *	Find the Scsi_Device associated with the SCSI address,
+	 * and mark it as changed, invalidating the cache. This deals
+	 * with changes to existing device IDs.
+	 */
+
+	if (!dev || !dev->scsi_host_ptr)
+		return;
+	/*
+	 * force reload of disk info via probe_container
+	 */
+	if ((device_config_needed == CHANGE)
+	 && (dev->fsa_dev[container].valid == 1))
+		dev->fsa_dev[container].valid = 2;
+	if ((device_config_needed == CHANGE) ||
+			(device_config_needed == ADD))
+		probe_container(dev, container);
+	device = scsi_device_lookup(dev->scsi_host_ptr, 
+		CONTAINER_TO_CHANNEL(container), 
+		CONTAINER_TO_ID(container), 
+		CONTAINER_TO_LUN(container));
+	if (device) {
+		switch (device_config_needed) {
+		case DELETE:
+			scsi_remove_device(device);
+			break;
+		case CHANGE:
+			if (!dev->fsa_dev[container].valid) {
+				scsi_remove_device(device);
+				break;
+			}
+			scsi_rescan_device(&device->sdev_gendev);
+
+		default:
+			break;
+		}
+		scsi_device_put(device);
+	}
+	if (device_config_needed == ADD) {
+		scsi_add_device(dev->scsi_host_ptr,
+		  CONTAINER_TO_CHANNEL(container),
+		  CONTAINER_TO_ID(container),
+		  CONTAINER_TO_LUN(container));
+	}
+
+}
+
 /**
  *	aac_command_thread	-	command processing thread
  *	@dev: Adapter to monitor
@@ -860,6 +1123,7 @@ int aac_command_thread(struct aac_dev * dev)
 			aifcmd = (struct aac_aifcmd *) hw_fib->data;
 			if (aifcmd->command == cpu_to_le32(AifCmdDriverNotify)) {
 				/* Handle Driver Notify Events */
+				aac_handle_aif(dev, fib);
 				*(__le32 *)hw_fib->data = cpu_to_le32(ST_OK);
 				fib_adapter_complete(fib, (u16)sizeof(u32));
 			} else {
@@ -872,7 +1136,15 @@ int aac_command_thread(struct aac_dev * dev)
 				unsigned num;
 				struct hw_fib ** hw_fib_pool, ** hw_fib_p;
 				struct fib ** fib_pool, ** fib_p;
-				
+			
+				/* Sniff events */
+				if ((aifcmd->command == 
+				     cpu_to_le32(AifCmdEventNotify)) ||
+				    (aifcmd->command == 
+				     cpu_to_le32(AifCmdJobProgress))) {
+					aac_handle_aif(dev, fib);
+				}
+ 				
 				time_now = jiffies/HZ;
 
 				/*