Merge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging

Pull i2c update from Jean Delvare:
 "This is my last pull request for the i2c subsystem.  It includes all
  the patches I collected between kernel v3.7-rc1 and me passing i2c
  maintenance duties over to Wolfram.

  Future patches to the many i2c bus drivers I still maintain will go
  through Wolfram's tree."

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c: Mention functionality flags in SMBus protocol documentation
  i2c-piix4: Convert dev_printk(KERN_<LEVEL> to dev_<level>(
  i2c-i801: Enable interrupts for all post-ICH5 chips
  i2c-i801: Add device tree support
  MAINTAINERS: Fix drivers/i2c/busses/i2c-stub.c

Documentation/i2c/smbus-protocol

@@ -23,6 +23,12 @@ don't match these function names.  For some of the operations which pass a
 single data byte, the functions using SMBus protocol operation names execute
 a different protocol operation entirely.
 
+Each transaction type corresponds to a functionality flag. Before calling a
+transaction function, a device driver should always check (just once) for
+the corresponding functionality flag to ensure that the underlying I2C
+adapter supports the transaction in question. See
+<file:Documentation/i2c/functionality> for the details.
+
 
 Key to symbols
 ==============
@@ -49,6 +55,8 @@ This sends a single bit to the device, at the place of the Rd/Wr bit.
 
 A Addr Rd/Wr [A] P
 
+Functionality flag: I2C_FUNC_SMBUS_QUICK
+
 
 SMBus Receive Byte:  i2c_smbus_read_byte()
 ==========================================
@@ -60,6 +68,8 @@ the previous SMBus command.
 
 S Addr Rd [A] [Data] NA P
 
+Functionality flag: I2C_FUNC_SMBUS_READ_BYTE
+
 
 SMBus Send Byte:  i2c_smbus_write_byte()
 ========================================
@@ -69,6 +79,8 @@ to a device.  See Receive Byte for more information.
 
 S Addr Wr [A] Data [A] P
 
+Functionality flag: I2C_FUNC_SMBUS_WRITE_BYTE
+
 
 SMBus Read Byte:  i2c_smbus_read_byte_data()
 ============================================
@@ -78,6 +90,8 @@ The register is specified through the Comm byte.
 
 S Addr Wr [A] Comm [A] S Addr Rd [A] [Data] NA P
 
+Functionality flag: I2C_FUNC_SMBUS_READ_BYTE_DATA
+
 
 SMBus Read Word:  i2c_smbus_read_word_data()
 ============================================
@@ -88,6 +102,8 @@ byte. But this time, the data is a complete word (16 bits).
 
 S Addr Wr [A] Comm [A] S Addr Rd [A] [DataLow] A [DataHigh] NA P
 
+Functionality flag: I2C_FUNC_SMBUS_READ_WORD_DATA
+
 Note the convenience function i2c_smbus_read_word_swapped is
 available for reads where the two data bytes are the other way
 around (not SMBus compliant, but very popular.)
@@ -102,6 +118,8 @@ the Read Byte operation.
 
 S Addr Wr [A] Comm [A] Data [A] P
 
+Functionality flag: I2C_FUNC_SMBUS_WRITE_BYTE_DATA
+
 
 SMBus Write Word:  i2c_smbus_write_word_data()
 ==============================================
@@ -112,6 +130,8 @@ specified through the Comm byte.
 
 S Addr Wr [A] Comm [A] DataLow [A] DataHigh [A] P
 
+Functionality flag: I2C_FUNC_SMBUS_WRITE_WORD_DATA
+
 Note the convenience function i2c_smbus_write_word_swapped is
 available for writes where the two data bytes are the other way
 around (not SMBus compliant, but very popular.)
@@ -126,6 +146,8 @@ This command selects a device register (through the Comm byte), sends
 S Addr Wr [A] Comm [A] DataLow [A] DataHigh [A] 
                              S Addr Rd [A] [DataLow] A [DataHigh] NA P
 
+Functionality flag: I2C_FUNC_SMBUS_PROC_CALL
+
 
 SMBus Block Read:  i2c_smbus_read_block_data()
 ==============================================
@@ -137,6 +159,8 @@ of data is specified by the device in the Count byte.
 S Addr Wr [A] Comm [A] 
            S Addr Rd [A] [Count] A [Data] A [Data] A ... A [Data] NA P
 
+Functionality flag: I2C_FUNC_SMBUS_READ_BLOCK_DATA
+
 
 SMBus Block Write:  i2c_smbus_write_block_data()
 ================================================
@@ -147,6 +171,8 @@ Comm byte. The amount of data is specified in the Count byte.
 
 S Addr Wr [A] Comm [A] Count [A] Data [A] Data [A] ... [A] Data [A] P
 
+Functionality flag: I2C_FUNC_SMBUS_WRITE_BLOCK_DATA
+
 
 SMBus Block Write - Block Read Process Call
 ===========================================
@@ -160,6 +186,8 @@ This command selects a device register (through the Comm byte), sends
 S Addr Wr [A] Comm [A] Count [A] Data [A] ...
                              S Addr Rd [A] [Count] A [Data] ... A P
 
+Functionality flag: I2C_FUNC_SMBUS_BLOCK_PROC_CALL
+
 
 SMBus Host Notify
 =================
@@ -229,15 +257,7 @@ designated register that is specified through the Comm byte.
 S Addr Wr [A] Comm [A] 
            S Addr Rd [A] [Data] A [Data] A ... A [Data] NA P
 
-
-I2C Block Read (2 Comm bytes)
-=============================
-
-This command reads a block of bytes from a device, from a 
-designated register that is specified through the two Comm bytes.
-
-S Addr Wr [A] Comm1 [A] Comm2 [A] 
-           S Addr Rd [A] [Data] A [Data] A ... A [Data] NA P
+Functionality flag: I2C_FUNC_SMBUS_READ_I2C_BLOCK
 
 
 I2C Block Write:  i2c_smbus_write_i2c_block_data()
@@ -249,3 +269,5 @@ Comm byte. Note that command lengths of 0, 2, or more bytes are
 supported as they are indistinguishable from data.
 
 S Addr Wr [A] Comm [A] Data [A] Data [A] ... [A] Data [A] P
+
+Functionality flag: I2C_FUNC_SMBUS_WRITE_I2C_BLOCK

MAINTAINERS

@@ -3712,7 +3712,7 @@ I2C/SMBUS STUB DRIVER
 M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
-F:	drivers/i2c/busses/i2c-stub.c
+F:	drivers/i2c/i2c-stub.c
 
 I2C SUBSYSTEM
 M:	Wolfram Sang <w.sang@pengutronix.de>

drivers/i2c/busses/i2c-i801.c

@@ -81,6 +81,7 @@
 #include <linux/slab.h>
 #include <linux/wait.h>
 #include <linux/err.h>
+#include <linux/of_i2c.h>
 
 #if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
 		defined CONFIG_DMI
@@ -1108,6 +1109,7 @@ static int __devinit i801_probe(struct pci_dev *dev,
 		/* fall through */
 	default:
 		priv->features |= FEATURE_I2C_BLOCK_READ;
+		priv->features |= FEATURE_IRQ;
 		/* fall through */
 	case PCI_DEVICE_ID_INTEL_82801DB_3:
 		priv->features |= FEATURE_SMBUS_PEC;
@@ -1120,16 +1122,6 @@ static int __devinit i801_probe(struct pci_dev *dev,
 		break;
 	}
 
-	/* IRQ processing tested on CougarPoint PCH, ICH5, ICH7-M and ICH10 */
-	if (dev->device == PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS ||
-	    dev->device == PCI_DEVICE_ID_INTEL_82801EB_3 ||
-	    dev->device == PCI_DEVICE_ID_INTEL_ICH7_17 ||
-	    dev->device == PCI_DEVICE_ID_INTEL_ICH8_5 ||
-	    dev->device == PCI_DEVICE_ID_INTEL_ICH9_6 ||
-	    dev->device == PCI_DEVICE_ID_INTEL_ICH10_4 ||
-	    dev->device == PCI_DEVICE_ID_INTEL_ICH10_5)
-		priv->features |= FEATURE_IRQ;
-
 	/* Disable features on user request */
 	for (i = 0; i < ARRAY_SIZE(i801_feature_names); i++) {
 		if (priv->features & disable_features & (1 << i))
@@ -1215,6 +1207,7 @@ static int __devinit i801_probe(struct pci_dev *dev,
 		goto exit_free_irq;
 	}
 
+	of_i2c_register_devices(&priv->adapter);
 	i801_probe_optional_slaves(priv);
 	/* We ignore errors - multiplexing is optional */
 	i801_add_mux(priv);

drivers/i2c/busses/i2c-piix4.c

@@ -204,9 +204,8 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev,
 			 */
 			pci_write_config_byte(PIIX4_dev, SMBHSTCFG,
 					      temp | 1);
-			dev_printk(KERN_NOTICE, &PIIX4_dev->dev,
-				"WARNING: SMBus interface has been "
-				"FORCEFULLY ENABLED!\n");
+			dev_notice(&PIIX4_dev->dev,
+				   "WARNING: SMBus interface has been FORCEFULLY ENABLED!\n");
 		} else {
 			dev_err(&PIIX4_dev->dev,
 				"Host SMBus controller not enabled!\n");