Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
接近 2 年 前同步成功

通知 170
Star 36
Fork 7
cloud-kernel
cloud-kernel
提交 11f7135b 编写于 作者: G Gregory CLEMENT
浏览文件
操作

ARM: dts: armada-370-xp: add node labels 

As it was previously done for kirkwood, this adds missing node labels to
Armada 370 and XP common and SoC specific nodes to allow to reference
them more easily.
Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
上级 e72996b8
隐藏空白更改
内联 并排
Showing with 59 addition and 59 deletion
arch/arm/boot/dts/armada-370-xp.dtsi
浏览文件 @ 11f7135b
......@@ -86,7 +86,7 @@
pcie-mem-aperture = <0xf8000000 0x7e00000>;
pcie-io-aperture = <0xffe00000 0x100000>;
devbus-bootcs {
devbus_bootcs: devbus-bootcs {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
......@@ -96,7 +96,7 @@
status = "disabled";
};
devbus-cs0 {
devbus_cs0: devbus-cs0 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
......@@ -106,7 +106,7 @@
status = "disabled";
};
devbus-cs1 {
devbus_cs1: devbus-cs1 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
......@@ -116,7 +116,7 @@
status = "disabled";
};
devbus-cs2 {
devbus_cs2: devbus-cs2 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
......@@ -126,7 +126,7 @@
status = "disabled";
};
devbus-cs3 {
devbus_cs3: devbus-cs3 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
......@@ -142,7 +142,7 @@
#size-cells = <1>;
ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
rtc@10300 {
rtc: rtc@10300 {
compatible = "marvell,orion-rtc";
reg = <0x10300 0x20>;
interrupts = <50>;
......@@ -214,38 +214,38 @@
msi-controller;
};
coherency-fabric@20200 {
coherencyfab: coherency-fabric@20200 {
compatible = "marvell,coherency-fabric";
reg = <0x20200 0xb0>, <0x21010 0x1c>;
};
timer@20300 {
timer: timer@20300 {
reg = <0x20300 0x30>, <0x21040 0x30>;
interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
};
watchdog@20300 {
watchdog: watchdog@20300 {
reg = <0x20300 0x34>, <0x20704 0x4>;
};
cpurst@20800 {
cpurst: cpurst@20800 {
compatible = "marvell,armada-370-cpu-reset";
reg = <0x20800 0x8>;
};
pmsu@22000 {
pmsu: pmsu@22000 {
compatible = "marvell,armada-370-pmsu";
reg = <0x22000 0x1000>;
};
usb@50000 {
usb0: usb@50000 {
compatible = "marvell,orion-ehci";
reg = <0x50000 0x500>;
interrupts = <45>;
status = "disabled";
};
usb@51000 {
usb1: usb@51000 {
compatible = "marvell,orion-ehci";
reg = <0x51000 0x500>;
interrupts = <46>;
......@@ -274,7 +274,7 @@
status = "disabled";
};
sata@a0000 {
sata: sata@a0000 {
compatible = "marvell,armada-370-sata";
reg = <0xa0000 0x5000>;
interrupts = <55>;
......@@ -283,7 +283,7 @@
status = "disabled";
};
nand@d0000 {
nand: nand@d0000 {
compatible = "marvell,armada370-nand";
reg = <0xd0000 0x54>;
#address-cells = <1>;
......@@ -293,7 +293,7 @@
status = "disabled";
};
mvsdio@d4000 {
sdio: mvsdio@d4000 {
compatible = "marvell,orion-sdio";
reg = <0xd4000 0x200>;
interrupts = <54>;
......
arch/arm/boot/dts/armada-370.dtsi
浏览文件 @ 11f7135b
......@@ -70,7 +70,7 @@
reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
};
pcie-controller {
pciec: pcie-controller {
compatible = "marvell,armada-370-pcie";
status = "disabled";
device_type = "pci";
......@@ -89,7 +89,7 @@
0x82000000 0x2 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
0x81000000 0x2 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */>;
pcie@1,0 {
pcie0: pcie@1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
......@@ -106,7 +106,7 @@
status = "disabled";
};
pcie@2,0 {
pcie2: pcie@2,0 {
device_type = "pci";
assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
......@@ -190,7 +190,7 @@
pinctrl-names = "default";
};
system-controller@18200 {
systemc: system-controller@18200 {
compatible = "marvell,armada-370-xp-system-controller";
reg = <0x18200 0x100>;
};
......@@ -208,14 +208,14 @@
#clock-cells = <1>;
};
thermal@18300 {
thermal: thermal@18300 {
compatible = "marvell,armada370-thermal";
reg = <0x18300 0x4
0x18304 0x4>;
status = "okay";
};
sscg@18330 {
sscg: sscg@18330 {
reg = <0x18330 0x4>;
};
......@@ -233,7 +233,7 @@
clocks = <&coreclk 2>;
};
cpu-config@21000 {
cpuconf: cpu-config@21000 {
compatible = "marvell,armada-370-cpu-config";
reg = <0x21000 0x8>;
};
......@@ -256,7 +256,7 @@
clocks = <&coreclk 0>;
};
xor@60800 {
xor0: xor@60800 {
compatible = "marvell,orion-xor";
reg = <0x60800 0x100
0x60A00 0x100>;
......@@ -275,7 +275,7 @@
};
};
xor@60900 {
xor1: xor@60900 {
compatible = "marvell,orion-xor";
reg = <0x60900 0x100
0x60b00 0x100>;
......@@ -302,7 +302,7 @@
compatible = "marvell,armada-370-neta";
};
crypto@90000 {
cesa: crypto@90000 {
compatible = "marvell,armada-370-crypto";
reg = <0x90000 0x10000>;
reg-names = "regs";
......
arch/arm/boot/dts/armada-xp-mv78230.dtsi
浏览文件 @ 11f7135b
......@@ -86,7 +86,7 @@
* configured as x4 or quad x1 lanes. One unit is
* x1 only.
*/
pcie-controller {
pciec: pcie-controller {
compatible = "marvell,armada-xp-pcie";
status = "disabled";
device_type = "pci";
......@@ -114,7 +114,7 @@
0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */>;
pcie@1,0 {
pcie1: pcie@1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
......@@ -131,7 +131,7 @@
status = "disabled";
};
pcie@2,0 {
pcie2: pcie@2,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
......@@ -148,7 +148,7 @@
status = "disabled";
};
pcie@3,0 {
pcie3: pcie@3,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
reg = <0x1800 0 0 0 0>;
......@@ -165,7 +165,7 @@
status = "disabled";
};
pcie@4,0 {
pcie4: pcie@4,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
reg = <0x2000 0 0 0 0>;
......@@ -182,7 +182,7 @@
status = "disabled";
};
pcie@5,0 {
pcie5: pcie@5,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
reg = <0x2800 0 0 0 0>;
......
arch/arm/boot/dts/armada-xp-mv78260.dtsi
浏览文件 @ 11f7135b
......@@ -87,7 +87,7 @@
* configured as x4 or quad x1 lanes. One unit is
* x4 only.
*/
pcie-controller {
pciec: pcie-controller {
compatible = "marvell,armada-xp-pcie";
status = "disabled";
device_type = "pci";
......@@ -129,7 +129,7 @@
0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>;
pcie@1,0 {
pcie1: pcie@1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
......@@ -146,7 +146,7 @@
status = "disabled";
};
pcie@2,0 {
pcie2: pcie@2,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
......@@ -163,7 +163,7 @@
status = "disabled";
};
pcie@3,0 {
pcie3: pcie@3,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
reg = <0x1800 0 0 0 0>;
......@@ -180,7 +180,7 @@
status = "disabled";
};
pcie@4,0 {
pcie4: pcie@4,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
reg = <0x2000 0 0 0 0>;
......@@ -197,7 +197,7 @@
status = "disabled";
};
pcie@5,0 {
pcie5: pcie@5,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
reg = <0x2800 0 0 0 0>;
......@@ -214,7 +214,7 @@
status = "disabled";
};
pcie@6,0 {
pcie6: pcie@6,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
reg = <0x3000 0 0 0 0>;
......@@ -231,7 +231,7 @@
status = "disabled";
};
pcie@7,0 {
pcie7: pcie@7,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
reg = <0x3800 0 0 0 0>;
......@@ -248,7 +248,7 @@
status = "disabled";
};
pcie@8,0 {
pcie8: pcie@8,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
reg = <0x4000 0 0 0 0>;
......@@ -265,7 +265,7 @@
status = "disabled";
};
pcie@9,0 {
pcie9: pcie@9,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
reg = <0x4800 0 0 0 0>;
......
arch/arm/boot/dts/armada-xp-mv78460.dtsi
浏览文件 @ 11f7135b
......@@ -104,7 +104,7 @@
* configured as x4 or quad x1 lanes. Two units are
* x4/x1.
*/
pcie-controller {
pciec: pcie-controller {
compatible = "marvell,armada-xp-pcie";
status = "disabled";
device_type = "pci";
......@@ -150,7 +150,7 @@
0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>;
pcie@1,0 {
pcie1: pcie@1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
......@@ -167,7 +167,7 @@
status = "disabled";
};
pcie@2,0 {
pcie2: pcie@2,0 {
device_type = "pci";
assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
......@@ -184,7 +184,7 @@
status = "disabled";
};
pcie@3,0 {
pcie3: pcie@3,0 {
device_type = "pci";
assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
reg = <0x1800 0 0 0 0>;
......@@ -201,7 +201,7 @@
status = "disabled";
};
pcie@4,0 {
pcie4: pcie@4,0 {
device_type = "pci";
assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
reg = <0x2000 0 0 0 0>;
......@@ -218,7 +218,7 @@
status = "disabled";
};
pcie@5,0 {
pcie5: pcie@5,0 {
device_type = "pci";
assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
reg = <0x2800 0 0 0 0>;
......@@ -235,7 +235,7 @@
status = "disabled";
};
pcie@6,0 {
pcie6: pcie@6,0 {
device_type = "pci";
assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
reg = <0x3000 0 0 0 0>;
......@@ -252,7 +252,7 @@
status = "disabled";
};
pcie@7,0 {
pcie7: pcie@7,0 {
device_type = "pci";
assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
reg = <0x3800 0 0 0 0>;
......@@ -269,7 +269,7 @@
status = "disabled";
};
pcie@8,0 {
pcie8: pcie@8,0 {
device_type = "pci";
assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
reg = <0x4000 0 0 0 0>;
......@@ -286,7 +286,7 @@
status = "disabled";
};
pcie@9,0 {
pcie9: pcie@9,0 {
device_type = "pci";
assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
reg = <0x4800 0 0 0 0>;
......@@ -303,7 +303,7 @@
status = "disabled";
};
pcie@10,0 {
pcie10: pcie@10,0 {
device_type = "pci";
assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
reg = <0x5000 0 0 0 0>;
......
arch/arm/boot/dts/armada-xp.dtsi
浏览文件 @ 11f7135b
......@@ -118,7 +118,7 @@
status = "disabled";
};
system-controller@18200 {
systemc: system-controller@18200 {
compatible = "marvell,armada-370-xp-system-controller";
reg = <0x18200 0x500>;
};
......@@ -136,7 +136,7 @@
#clock-cells = <1>;
};
thermal@182b0 {
thermal: thermal@182b0 {
compatible = "marvell,armadaxp-thermal";
reg = <0x182b0 0x4
0x184d0 0x4>;
......@@ -191,7 +191,7 @@
clocks = <&gateclk 19>;
};
usb@52000 {
usb2: usb@52000 {
compatible = "marvell,orion-ehci";
reg = <0x52000 0x500>;
interrupts = <47>;
......@@ -199,7 +199,7 @@
status = "disabled";
};
xor@60900 {
xor1: xor@60900 {
compatible = "marvell,orion-xor";
reg = <0x60900 0x100
0x60b00 0x100>;
......@@ -227,7 +227,7 @@
compatible = "marvell,armada-xp-neta";
};
crypto@90000 {
cesa: crypto@90000 {
compatible = "marvell,armada-xp-crypto";
reg = <0x90000 0x10000>;
reg-names = "regs";
......@@ -247,7 +247,7 @@
status = "disabled";
};
xor@f0900 {
xor0: xor@f0900 {
compatible = "marvell,orion-xor";
reg = <0xF0900 0x100
0xF0B00 0x100>;
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或