Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  cmd64x: fix hwif->chipset setup
  MAINTAINERS: update ide-cd entry
  ide-cd: fix 'ireason' reporting in cdrom_pc_intr()
  ide-cd: fix error message in cdrom_pc_intr()
  ide-cd: add error message for DMA error to cdrom_read_intr()
  ide-cd: fix error messages in cdrom_write_intr()
  ide-cd: add missing 'ireason' masking to cdrom_write_intr()
  ide-cd: fix error messages in cdrom_{read,write}_check_ireason()
  ide-cd: use ide_cd_release() in ide_cd_probe()
  ide-cd: fix ACER/AOpen 24X CDROM speed reporting on big-endian machines
  ide-cd: fix SAMSUNG CD-ROM SCR-3231 quirk
  drivers/ide/: Spelling fixes

MAINTAINERS

@@ -1870,8 +1870,10 @@ T:	quilt kernel.org/pub/linux/kernel/people/bart/pata-2.6/
 S:	Maintained
 
 IDE/ATAPI CDROM DRIVER
+P:	Borislav Petkov
+M:	bbpetkov@yahoo.de
 L:	linux-ide@vger.kernel.org
-S:	Unmaintained
+S:	Maintained
 
 IDE/ATAPI FLOPPY DRIVERS
 P:	Paul Bristow

drivers/ide/ide-cd.c

@@ -1068,8 +1068,8 @@ int cdrom_read_check_ireason (ide_drive_t *drive, int len, int ireason)
 		return 0;
 	else if (ireason == 0) {
 		/* Whoops... The drive is expecting to receive data from us! */
-		printk(KERN_ERR "%s: read_intr: Drive wants to transfer data the "
-						"wrong way!\n", drive->name);
+		printk(KERN_ERR "%s: %s: wrong transfer direction!\n",
+				drive->name, __FUNCTION__);
 
 		/* Throw some data at the drive so it doesn't hang
 		   and quit this request. */
@@ -1086,8 +1086,8 @@ int cdrom_read_check_ireason (ide_drive_t *drive, int len, int ireason)
 		return 0;
 	} else {
 		/* Drive wants a command packet, or invalid ireason... */
-		printk(KERN_ERR "%s: read_intr: bad interrupt reason %x\n", drive->name,
-								ireason);
+		printk(KERN_ERR "%s: %s: bad interrupt reason 0x%02x\n",
+				drive->name, __FUNCTION__, ireason);
 	}
 
 	cdrom_end_request(drive, 0);
@@ -1112,8 +1112,11 @@ static ide_startstop_t cdrom_read_intr (ide_drive_t *drive)
 	 */
 	if (dma) {
 		info->dma = 0;
-		if ((dma_error = HWIF(drive)->ide_dma_end(drive)))
+		dma_error = HWIF(drive)->ide_dma_end(drive);
+		if (dma_error) {
+			printk(KERN_ERR "%s: DMA read error\n", drive->name);
 			ide_dma_off(drive);
+		}
 	}
 
 	if (cdrom_decode_status(drive, 0, &stat))
@@ -1443,7 +1446,7 @@ static ide_startstop_t cdrom_pc_intr (ide_drive_t *drive)
 		return ide_stopped;
 
 	/* Read the interrupt reason and the transfer length. */
-	ireason = HWIF(drive)->INB(IDE_IREASON_REG);
+	ireason = HWIF(drive)->INB(IDE_IREASON_REG) & 0x3;
 	lowcyl  = HWIF(drive)->INB(IDE_BCOUNTL_REG);
 	highcyl = HWIF(drive)->INB(IDE_BCOUNTH_REG);
 
@@ -1484,7 +1487,7 @@ static ide_startstop_t cdrom_pc_intr (ide_drive_t *drive)
 	if (thislen > len) thislen = len;
 
 	/* The drive wants to be written to. */
-	if ((ireason & 3) == 0) {
+	if (ireason == 0) {
 		if (!rq->data) {
 			blk_dump_rq_flags(rq, "cdrom_pc_intr, write");
 			goto confused;
@@ -1506,9 +1509,9 @@ static ide_startstop_t cdrom_pc_intr (ide_drive_t *drive)
 	}
 
 	/* Same drill for reading. */
-	else if ((ireason & 3) == 2) {
+	else if (ireason == 2) {
 		if (!rq->data) {
-			blk_dump_rq_flags(rq, "cdrom_pc_intr, write");
+			blk_dump_rq_flags(rq, "cdrom_pc_intr, read");
 			goto confused;
 		}
 		/* Transfer the data. */
@@ -1632,8 +1635,8 @@ static int cdrom_write_check_ireason(ide_drive_t *drive, int len, int ireason)
 		return 0;
 	else if (ireason == 2) {
 		/* Whoops... The drive wants to send data. */
-		printk(KERN_ERR "%s: write_intr: wrong transfer direction!\n",
-							drive->name);
+		printk(KERN_ERR "%s: %s: wrong transfer direction!\n",
+				drive->name, __FUNCTION__);
 
 		while (len > 0) {
 			int dum = 0;
@@ -1642,8 +1645,8 @@ static int cdrom_write_check_ireason(ide_drive_t *drive, int len, int ireason)
 		}
 	} else {
 		/* Drive wants a command packet, or invalid ireason... */
-		printk(KERN_ERR "%s: write_intr: bad interrupt reason %x\n",
-							drive->name, ireason);
+		printk(KERN_ERR "%s: %s: bad interrupt reason 0x%02x\n",
+				drive->name, __FUNCTION__, ireason);
 	}
 
 	cdrom_end_request(drive, 0);
@@ -1805,8 +1808,9 @@ static ide_startstop_t cdrom_write_intr(ide_drive_t *drive)
 	/* Check for errors. */
 	if (dma) {
 		info->dma = 0;
-		if ((dma_error = HWIF(drive)->ide_dma_end(drive))) {
-			printk(KERN_ERR "ide-cd: write dma error\n");
+		dma_error = HWIF(drive)->ide_dma_end(drive);
+		if (dma_error) {
+			printk(KERN_ERR "%s: DMA write error\n", drive->name);
 			ide_dma_off(drive);
 		}
 	}
@@ -1826,7 +1830,7 @@ static ide_startstop_t cdrom_write_intr(ide_drive_t *drive)
 	}
 
 	/* Read the interrupt reason and the transfer length. */
-	ireason = HWIF(drive)->INB(IDE_IREASON_REG);
+	ireason = HWIF(drive)->INB(IDE_IREASON_REG) & 0x3;
 	lowcyl  = HWIF(drive)->INB(IDE_BCOUNTL_REG);
 	highcyl = HWIF(drive)->INB(IDE_BCOUNTH_REG);
 
@@ -1839,8 +1843,9 @@ static ide_startstop_t cdrom_write_intr(ide_drive_t *drive)
 		 */
 		uptodate = 1;
 		if (rq->current_nr_sectors > 0) {
-			printk(KERN_ERR "%s: write_intr: data underrun (%d blocks)\n",
-			drive->name, rq->current_nr_sectors);
+			printk(KERN_ERR "%s: %s: data underrun (%d blocks)\n",
+					drive->name, __FUNCTION__,
+					rq->current_nr_sectors);
 			uptodate = 0;
 		}
 		cdrom_end_request(drive, uptodate);
@@ -1860,7 +1865,8 @@ static ide_startstop_t cdrom_write_intr(ide_drive_t *drive)
 		int this_transfer;
 
 		if (!rq->current_nr_sectors) {
-			printk(KERN_ERR "ide-cd: write_intr: oops\n");
+			printk(KERN_ERR "%s: %s: confused, missing data\n",
+					drive->name, __FUNCTION__);
 			break;
 		}
 
@@ -2688,14 +2694,14 @@ void ide_cdrom_update_speed (ide_drive_t *drive, struct atapi_capabilities_page
 	if (!drive->id->model[0] &&
 	    !strncmp(drive->id->fw_rev, "241N", 4)) {
 		CDROM_STATE_FLAGS(drive)->current_speed  =
-			(((unsigned int)cap->curspeed) + (176/2)) / 176;
+			(le16_to_cpu(cap->curspeed) + (176/2)) / 176;
 		CDROM_CONFIG_FLAGS(drive)->max_speed =
-			(((unsigned int)cap->maxspeed) + (176/2)) / 176;
+			(le16_to_cpu(cap->maxspeed) + (176/2)) / 176;
 	} else {
 		CDROM_STATE_FLAGS(drive)->current_speed  =
-			(ntohs(cap->curspeed) + (176/2)) / 176;
+			(be16_to_cpu(cap->curspeed) + (176/2)) / 176;
 		CDROM_CONFIG_FLAGS(drive)->max_speed =
-			(ntohs(cap->maxspeed) + (176/2)) / 176;
+			(be16_to_cpu(cap->maxspeed) + (176/2)) / 176;
 	}
 }
 
@@ -2909,6 +2915,9 @@ static int ide_cdrom_register (ide_drive_t *drive, int nslots)
 	if (!CDROM_CONFIG_FLAGS(drive)->ram)
 		devinfo->mask |= CDC_RAM;
 
+	if (CDROM_CONFIG_FLAGS(drive)->no_speed_select)
+		devinfo->mask |= CDC_SELECT_SPEED;
+
 	devinfo->disk = info->disk;
 	return register_cdrom(devinfo);
 }
@@ -3161,7 +3170,7 @@ int ide_cdrom_setup (ide_drive_t *drive)
 		CDROM_CONFIG_FLAGS(drive)->limit_nframes = 1;
 	/* the 3231 model does not support the SET_CD_SPEED command */
 	else if (!strcmp(drive->id->model, "SAMSUNG CD-ROM SCR-3231"))
-		cdi->mask |= CDC_SELECT_SPEED;
+		CDROM_CONFIG_FLAGS(drive)->no_speed_select = 1;
 
 #if ! STANDARD_ATAPI
 	/* by default Sanyo 3 CD changer support is turned off and
@@ -3504,15 +3513,8 @@ static int ide_cd_probe(ide_drive_t *drive)
 	g->driverfs_dev = &drive->gendev;
 	g->flags = GENHD_FL_CD | GENHD_FL_REMOVABLE;
 	if (ide_cdrom_setup(drive)) {
-		struct cdrom_device_info *devinfo = &info->devinfo;
 		ide_proc_unregister_driver(drive, &ide_cdrom_driver);
-		kfree(info->buffer);
-		kfree(info->toc);
-		kfree(info->changer_info);
-		if (devinfo->handle == drive && unregister_cdrom(devinfo))
-			printk (KERN_ERR "%s: ide_cdrom_cleanup failed to unregister device from the cdrom driver.\n", drive->name);
-		kfree(info);
-		drive->driver_data = NULL;
+		ide_cd_release(&info->kref);
 		goto failed;
 	}
 

drivers/ide/ide-cd.h

@@ -91,7 +91,8 @@ struct ide_cd_config_flags {
 	__u8 close_tray		: 1; /* can close the tray */
 	__u8 writing		: 1; /* pseudo write in progress */
 	__u8 mo_drive		: 1; /* drive is an MO device */
-	__u8 reserved		: 2;
+	__u8 no_speed_select	: 1; /* SET_CD_SPEED command is unsupported. */
+	__u8 reserved		: 1;
 	byte max_speed;		     /* Max speed of the drive */
 };
 #define CDROM_CONFIG_FLAGS(drive) (&(((struct cdrom_info *)(drive->driver_data))->config_flags))

drivers/ide/pci/cmd64x.c

 /*
- * linux/drivers/ide/pci/cmd64x.c		Version 1.51	Nov 8, 2007
+ * linux/drivers/ide/pci/cmd64x.c		Version 1.52	Dec 24, 2007
  *
  * cmd64x.c: Enable interrupts at initialization time on Ultra/PCI machines.
  *           Due to massive hardware bugs, UltraDMA is only supported
@@ -564,6 +564,7 @@ static const struct ide_port_info cmd64x_chipsets[] __devinitdata = {
 		.init_chipset	= init_chipset_cmd64x,
 		.init_hwif	= init_hwif_cmd64x,
 		.enablebits	= {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
+		.chipset	= ide_cmd646,
 		.host_flags	= IDE_HFLAG_ABUSE_PREFETCH | IDE_HFLAG_BOOTABLE,
 		.pio_mask	= ATA_PIO5,
 		.mwdma_mask	= ATA_MWDMA2,
@@ -573,7 +574,6 @@ static const struct ide_port_info cmd64x_chipsets[] __devinitdata = {
 		.init_chipset	= init_chipset_cmd64x,
 		.init_hwif	= init_hwif_cmd64x,
 		.enablebits	= {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
-		.chipset	= ide_cmd646,
 		.host_flags	= IDE_HFLAG_ABUSE_PREFETCH | IDE_HFLAG_BOOTABLE,
 		.pio_mask	= ATA_PIO5,
 		.mwdma_mask	= ATA_MWDMA2,

drivers/ide/pci/cs5535.c

@@ -49,7 +49,7 @@
 #define ATAC_BM0_PRD		0x04
 #define CS5535_CABLE_DETECT	0x48
 
-/* Format I PIO settings. We seperate out cmd and data for safer timings */
+/* Format I PIO settings. We separate out cmd and data for safer timings */
 
 static unsigned int cs5535_pio_cmd_timings[5] =
 { 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131 };