提交 11ac75ed 编写于 作者: S Sathya Perla 提交者: David S. Miller

be2net: refactor/cleanup vf configuration code

- use adapter->num_vfs (and not the module param) to store the actual
number of vfs created. Use the same variable to reflect SRIOV
enable/disable state. So, drop the adapter->sriov_enabled field.

- use for_all_vfs() macro in VF configuration code

- drop the "vf_" prefix for the fields of be_vf_cfg; the prefix is
redundant and removing it helps reduce line wrap
Signed-off-by: NSathya Perla <sathya.perla@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 110b82bc
......@@ -288,11 +288,11 @@ struct be_drv_stats {
};
struct be_vf_cfg {
unsigned char vf_mac_addr[ETH_ALEN];
int vf_if_handle;
int vf_pmac_id;
u16 vf_vlan_tag;
u32 vf_tx_rate;
unsigned char mac_addr[ETH_ALEN];
int if_handle;
int pmac_id;
u16 vlan_tag;
u32 tx_rate;
};
struct be_adapter {
......@@ -368,16 +368,20 @@ struct be_adapter {
u32 flash_status;
struct completion flash_compl;
bool be3_native;
bool sriov_enabled;
struct be_vf_cfg *vf_cfg;
u32 num_vfs;
u8 is_virtfn;
struct be_vf_cfg *vf_cfg;
bool be3_native;
u32 sli_family;
u8 hba_port_num;
u16 pvid;
};
#define be_physfn(adapter) (!adapter->is_virtfn)
#define sriov_enabled(adapter) (adapter->num_vfs > 0)
#define for_all_vfs(adapter, vf_cfg, i) \
for (i = 0, vf_cfg = &adapter->vf_cfg[i]; i < adapter->num_vfs; \
i++, vf_cfg++)
/* BladeEngine Generation numbers */
#define BE_GEN2 2
......
......@@ -27,13 +27,14 @@ MODULE_DESCRIPTION(DRV_DESC " " DRV_VER);
MODULE_AUTHOR("ServerEngines Corporation");
MODULE_LICENSE("GPL");
static ushort rx_frag_size = 2048;
static unsigned int num_vfs;
module_param(rx_frag_size, ushort, S_IRUGO);
module_param(num_vfs, uint, S_IRUGO);
MODULE_PARM_DESC(rx_frag_size, "Size of a fragment that holds rcvd data.");
MODULE_PARM_DESC(num_vfs, "Number of PCI VFs to initialize");
static ushort rx_frag_size = 2048;
module_param(rx_frag_size, ushort, S_IRUGO);
MODULE_PARM_DESC(rx_frag_size, "Size of a fragment that holds rcvd data.");
static DEFINE_PCI_DEVICE_TABLE(be_dev_ids) = {
{ PCI_DEVICE(BE_VENDOR_ID, BE_DEVICE_ID1) },
{ PCI_DEVICE(BE_VENDOR_ID, BE_DEVICE_ID2) },
......@@ -779,15 +780,15 @@ static int be_change_mtu(struct net_device *netdev, int new_mtu)
*/
static int be_vid_config(struct be_adapter *adapter, bool vf, u32 vf_num)
{
struct be_vf_cfg *vf_cfg = &adapter->vf_cfg[vf_num];
u16 vtag[BE_NUM_VLANS_SUPPORTED];
u16 ntags = 0, i;
int status = 0;
u32 if_handle;
if (vf) {
if_handle = adapter->vf_cfg[vf_num].vf_if_handle;
vtag[0] = cpu_to_le16(adapter->vf_cfg[vf_num].vf_vlan_tag);
status = be_cmd_vlan_config(adapter, if_handle, vtag, 1, 1, 0);
vtag[0] = cpu_to_le16(vf_cfg->vlan_tag);
status = be_cmd_vlan_config(adapter, vf_cfg->if_handle, vtag,
1, 1, 0);
}
/* No need to further configure vids if in promiscuous mode */
......@@ -877,31 +878,30 @@ static void be_set_rx_mode(struct net_device *netdev)
static int be_set_vf_mac(struct net_device *netdev, int vf, u8 *mac)
{
struct be_adapter *adapter = netdev_priv(netdev);
struct be_vf_cfg *vf_cfg = &adapter->vf_cfg[vf];
int status;
if (!adapter->sriov_enabled)
if (!sriov_enabled(adapter))
return -EPERM;
if (!is_valid_ether_addr(mac) || (vf >= num_vfs))
if (!is_valid_ether_addr(mac) || vf >= adapter->num_vfs)
return -EINVAL;
if (lancer_chip(adapter)) {
status = be_cmd_set_mac_list(adapter, mac, 1, vf + 1);
} else {
status = be_cmd_pmac_del(adapter,
adapter->vf_cfg[vf].vf_if_handle,
adapter->vf_cfg[vf].vf_pmac_id, vf + 1);
status = be_cmd_pmac_del(adapter, vf_cfg->if_handle,
vf_cfg->pmac_id, vf + 1);
status = be_cmd_pmac_add(adapter, mac,
adapter->vf_cfg[vf].vf_if_handle,
&adapter->vf_cfg[vf].vf_pmac_id, vf + 1);
status = be_cmd_pmac_add(adapter, mac, vf_cfg->if_handle,
&vf_cfg->pmac_id, vf + 1);
}
if (status)
dev_err(&adapter->pdev->dev, "MAC %pM set on VF %d Failed\n",
mac, vf);
else
memcpy(adapter->vf_cfg[vf].vf_mac_addr, mac, ETH_ALEN);
memcpy(vf_cfg->mac_addr, mac, ETH_ALEN);
return status;
}
......@@ -910,18 +910,19 @@ static int be_get_vf_config(struct net_device *netdev, int vf,
struct ifla_vf_info *vi)
{
struct be_adapter *adapter = netdev_priv(netdev);
struct be_vf_cfg *vf_cfg = &adapter->vf_cfg[vf];
if (!adapter->sriov_enabled)
if (!sriov_enabled(adapter))
return -EPERM;
if (vf >= num_vfs)
if (vf >= adapter->num_vfs)
return -EINVAL;
vi->vf = vf;
vi->tx_rate = adapter->vf_cfg[vf].vf_tx_rate;
vi->vlan = adapter->vf_cfg[vf].vf_vlan_tag;
vi->tx_rate = vf_cfg->tx_rate;
vi->vlan = vf_cfg->vlan_tag;
vi->qos = 0;
memcpy(&vi->mac, adapter->vf_cfg[vf].vf_mac_addr, ETH_ALEN);
memcpy(&vi->mac, vf_cfg->mac_addr, ETH_ALEN);
return 0;
}
......@@ -932,17 +933,17 @@ static int be_set_vf_vlan(struct net_device *netdev,
struct be_adapter *adapter = netdev_priv(netdev);
int status = 0;
if (!adapter->sriov_enabled)
if (!sriov_enabled(adapter))
return -EPERM;
if ((vf >= num_vfs) || (vlan > 4095))
if (vf >= adapter->num_vfs || vlan > 4095)
return -EINVAL;
if (vlan) {
adapter->vf_cfg[vf].vf_vlan_tag = vlan;
adapter->vf_cfg[vf].vlan_tag = vlan;
adapter->vlans_added++;
} else {
adapter->vf_cfg[vf].vf_vlan_tag = 0;
adapter->vf_cfg[vf].vlan_tag = 0;
adapter->vlans_added--;
}
......@@ -960,16 +961,16 @@ static int be_set_vf_tx_rate(struct net_device *netdev,
struct be_adapter *adapter = netdev_priv(netdev);
int status = 0;
if (!adapter->sriov_enabled)
if (!sriov_enabled(adapter))
return -EPERM;
if ((vf >= num_vfs) || (rate < 0))
if (vf >= adapter->num_vfs || rate < 0)
return -EINVAL;
if (rate > 10000)
rate = 10000;
adapter->vf_cfg[vf].vf_tx_rate = rate;
adapter->vf_cfg[vf].tx_rate = rate;
status = be_cmd_set_qos(adapter, rate / 10, vf + 1);
if (status)
......@@ -1685,8 +1686,7 @@ static void be_tx_queues_destroy(struct be_adapter *adapter)
static int be_num_txqs_want(struct be_adapter *adapter)
{
if ((num_vfs && adapter->sriov_enabled) ||
be_is_mc(adapter) ||
if (sriov_enabled(adapter) || be_is_mc(adapter) ||
lancer_chip(adapter) || !be_physfn(adapter) ||
adapter->generation == BE_GEN2)
return 1;
......@@ -1768,8 +1768,8 @@ static void be_rx_queues_destroy(struct be_adapter *adapter)
static u32 be_num_rxqs_want(struct be_adapter *adapter)
{
if ((adapter->function_caps & BE_FUNCTION_CAPS_RSS) &&
!adapter->sriov_enabled && be_physfn(adapter) &&
!be_is_mc(adapter)) {
!sriov_enabled(adapter) && be_physfn(adapter) &&
!be_is_mc(adapter)) {
return 1 + MAX_RSS_QS; /* one default non-RSS queue */
} else {
dev_warn(&adapter->pdev->dev,
......@@ -2116,27 +2116,28 @@ static void be_msix_enable(struct be_adapter *adapter)
static int be_sriov_enable(struct be_adapter *adapter)
{
be_check_sriov_fn_type(adapter);
#ifdef CONFIG_PCI_IOV
if (be_physfn(adapter) && num_vfs) {
int status, pos;
u16 nvfs;
u16 dev_vfs;
pos = pci_find_ext_capability(adapter->pdev,
PCI_EXT_CAP_ID_SRIOV);
pci_read_config_word(adapter->pdev,
pos + PCI_SRIOV_TOTAL_VF, &nvfs);
pos + PCI_SRIOV_TOTAL_VF, &dev_vfs);
if (num_vfs > nvfs) {
adapter->num_vfs = min_t(u16, num_vfs, dev_vfs);
if (adapter->num_vfs != num_vfs)
dev_info(&adapter->pdev->dev,
"Device supports %d VFs and not %d\n",
nvfs, num_vfs);
num_vfs = nvfs;
}
"Device supports %d VFs and not %d\n",
adapter->num_vfs, num_vfs);
status = pci_enable_sriov(adapter->pdev, num_vfs);
adapter->sriov_enabled = status ? false : true;
status = pci_enable_sriov(adapter->pdev, adapter->num_vfs);
if (status)
adapter->num_vfs = 0;
if (adapter->sriov_enabled) {
if (adapter->num_vfs) {
adapter->vf_cfg = kcalloc(num_vfs,
sizeof(struct be_vf_cfg),
GFP_KERNEL);
......@@ -2151,10 +2152,10 @@ static int be_sriov_enable(struct be_adapter *adapter)
static void be_sriov_disable(struct be_adapter *adapter)
{
#ifdef CONFIG_PCI_IOV
if (adapter->sriov_enabled) {
if (sriov_enabled(adapter)) {
pci_disable_sriov(adapter->pdev);
kfree(adapter->vf_cfg);
adapter->sriov_enabled = false;
adapter->num_vfs = 0;
}
#endif
}
......@@ -2466,24 +2467,24 @@ static inline int be_vf_eth_addr_config(struct be_adapter *adapter)
u32 vf;
int status = 0;
u8 mac[ETH_ALEN];
struct be_vf_cfg *vf_cfg;
be_vf_eth_addr_generate(adapter, mac);
for (vf = 0; vf < num_vfs; vf++) {
for_all_vfs(adapter, vf_cfg, vf) {
if (lancer_chip(adapter)) {
status = be_cmd_set_mac_list(adapter, mac, 1, vf + 1);
} else {
status = be_cmd_pmac_add(adapter, mac,
adapter->vf_cfg[vf].vf_if_handle,
&adapter->vf_cfg[vf].vf_pmac_id,
vf + 1);
vf_cfg->if_handle,
&vf_cfg->pmac_id, vf + 1);
}
if (status)
dev_err(&adapter->pdev->dev,
"Mac address assignment failed for VF %d\n", vf);
else
memcpy(adapter->vf_cfg[vf].vf_mac_addr, mac, ETH_ALEN);
memcpy(vf_cfg->mac_addr, mac, ETH_ALEN);
mac[5] += 1;
}
......@@ -2492,25 +2493,23 @@ static inline int be_vf_eth_addr_config(struct be_adapter *adapter)
static void be_vf_clear(struct be_adapter *adapter)
{
struct be_vf_cfg *vf_cfg;
u32 vf;
for (vf = 0; vf < num_vfs; vf++) {
for_all_vfs(adapter, vf_cfg, vf) {
if (lancer_chip(adapter))
be_cmd_set_mac_list(adapter, NULL, 0, vf + 1);
else
be_cmd_pmac_del(adapter,
adapter->vf_cfg[vf].vf_if_handle,
adapter->vf_cfg[vf].vf_pmac_id, vf + 1);
}
be_cmd_pmac_del(adapter, vf_cfg->if_handle,
vf_cfg->pmac_id, vf + 1);
for (vf = 0; vf < num_vfs; vf++)
be_cmd_if_destroy(adapter, adapter->vf_cfg[vf].vf_if_handle,
vf + 1);
be_cmd_if_destroy(adapter, vf_cfg->if_handle, vf + 1);
}
}
static int be_clear(struct be_adapter *adapter)
{
if (be_physfn(adapter) && adapter->sriov_enabled)
if (sriov_enabled(adapter))
be_vf_clear(adapter);
be_cmd_if_destroy(adapter, adapter->if_handle, 0);
......@@ -2526,16 +2525,18 @@ static int be_clear(struct be_adapter *adapter)
static void be_vf_setup_init(struct be_adapter *adapter)
{
struct be_vf_cfg *vf_cfg;
int vf;
for (vf = 0; vf < num_vfs; vf++) {
adapter->vf_cfg[vf].vf_if_handle = -1;
adapter->vf_cfg[vf].vf_pmac_id = -1;
for_all_vfs(adapter, vf_cfg, vf) {
vf_cfg->if_handle = -1;
vf_cfg->pmac_id = -1;
}
}
static int be_vf_setup(struct be_adapter *adapter)
{
struct be_vf_cfg *vf_cfg;
u32 cap_flags, en_flags, vf;
u16 lnk_speed;
int status;
......@@ -2544,11 +2545,9 @@ static int be_vf_setup(struct be_adapter *adapter)
cap_flags = en_flags = BE_IF_FLAGS_UNTAGGED | BE_IF_FLAGS_BROADCAST |
BE_IF_FLAGS_MULTICAST;
for (vf = 0; vf < num_vfs; vf++) {
for_all_vfs(adapter, vf_cfg, vf) {
status = be_cmd_if_create(adapter, cap_flags, en_flags, NULL,
&adapter->vf_cfg[vf].vf_if_handle,
NULL, vf+1);
&vf_cfg->if_handle, NULL, vf + 1);
if (status)
goto err;
}
......@@ -2557,12 +2556,12 @@ static int be_vf_setup(struct be_adapter *adapter)
if (status)
goto err;
for (vf = 0; vf < num_vfs; vf++) {
for_all_vfs(adapter, vf_cfg, vf) {
status = be_cmd_link_status_query(adapter, NULL, &lnk_speed,
vf + 1);
vf + 1);
if (status)
goto err;
adapter->vf_cfg[vf].vf_tx_rate = lnk_speed * 10;
vf_cfg->tx_rate = lnk_speed * 10;
}
return 0;
err:
......@@ -2690,7 +2689,7 @@ static int be_setup(struct be_adapter *adapter)
pcie_set_readrq(adapter->pdev, 4096);
if (be_physfn(adapter) && adapter->sriov_enabled) {
if (sriov_enabled(adapter)) {
status = be_vf_setup(adapter);
if (status)
goto err;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册