提交 118eb304 编写于 作者: H Hante Meuleman 提交者: Kalle Valo

brcmfmac: Fix WEP configuration for AP mode.

When a device is configured for AP mode and it is configured for
WEP then the keys are plumbed first, followed by AP configuration.
During configuration a down command is given to the firmware which
will clear the configured keys. This patch reprograms the WEP keys
after AP has been brought up.
Reviewed-by: NArend Van Spriel <arend@broadcom.com>
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: NHante Meuleman <meuleman@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
上级 f714e58e
......@@ -452,16 +452,16 @@ static void convert_key_from_CPU(struct brcmf_wsec_key *key,
}
static int
send_key_to_dongle(struct net_device *ndev, struct brcmf_wsec_key *key)
send_key_to_dongle(struct brcmf_if *ifp, struct brcmf_wsec_key *key)
{
int err;
struct brcmf_wsec_key_le key_le;
convert_key_from_CPU(key, &key_le);
brcmf_netdev_wait_pend8021x(ndev);
brcmf_netdev_wait_pend8021x(ifp);
err = brcmf_fil_bsscfg_data_set(netdev_priv(ndev), "wsec_key", &key_le,
err = brcmf_fil_bsscfg_data_set(ifp, "wsec_key", &key_le,
sizeof(key_le));
if (err)
......@@ -1670,7 +1670,7 @@ brcmf_set_sharedkey(struct net_device *ndev,
brcmf_dbg(CONN, "key length (%d) key index (%d) algo (%d)\n",
key.len, key.index, key.algo);
brcmf_dbg(CONN, "key \"%s\"\n", key.data);
err = send_key_to_dongle(ndev, &key);
err = send_key_to_dongle(netdev_priv(ndev), &key);
if (err)
return err;
......@@ -2052,7 +2052,7 @@ brcmf_add_keyext(struct wiphy *wiphy, struct net_device *ndev,
/* check for key index change */
if (key.len == 0) {
/* key delete */
err = send_key_to_dongle(ndev, &key);
err = send_key_to_dongle(ifp, &key);
if (err)
brcmf_err("key delete error (%d)\n", err);
} else {
......@@ -2108,7 +2108,7 @@ brcmf_add_keyext(struct wiphy *wiphy, struct net_device *ndev,
brcmf_err("Invalid cipher (0x%x)\n", params->cipher);
return -EINVAL;
}
err = send_key_to_dongle(ndev, &key);
err = send_key_to_dongle(ifp, &key);
if (err)
brcmf_err("wsec_key error (%d)\n", err);
}
......@@ -2121,7 +2121,7 @@ brcmf_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev,
struct key_params *params)
{
struct brcmf_if *ifp = netdev_priv(ndev);
struct brcmf_wsec_key key;
struct brcmf_wsec_key *key;
s32 val;
s32 wsec;
s32 err = 0;
......@@ -2132,54 +2132,62 @@ brcmf_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev,
if (!check_vif_up(ifp->vif))
return -EIO;
if (key_idx >= BRCMF_MAX_DEFAULT_KEYS) {
/* we ignore this key index in this case */
brcmf_err("invalid key index (%d)\n", key_idx);
return -EINVAL;
}
if (mac_addr &&
(params->cipher != WLAN_CIPHER_SUITE_WEP40) &&
(params->cipher != WLAN_CIPHER_SUITE_WEP104)) {
brcmf_dbg(TRACE, "Exit");
return brcmf_add_keyext(wiphy, ndev, key_idx, mac_addr, params);
}
memset(&key, 0, sizeof(key));
key.len = (u32) params->key_len;
key.index = (u32) key_idx;
key = &ifp->vif->profile.key[key_idx];
memset(key, 0, sizeof(*key));
if (key.len > sizeof(key.data)) {
brcmf_err("Too long key length (%u)\n", key.len);
if (params->key_len > sizeof(key->data)) {
brcmf_err("Too long key length (%u)\n", params->key_len);
err = -EINVAL;
goto done;
}
memcpy(key.data, params->key, key.len);
key->len = params->key_len;
key->index = key_idx;
key.flags = BRCMF_PRIMARY_KEY;
memcpy(key->data, params->key, key->len);
key->flags = BRCMF_PRIMARY_KEY;
switch (params->cipher) {
case WLAN_CIPHER_SUITE_WEP40:
key.algo = CRYPTO_ALGO_WEP1;
key->algo = CRYPTO_ALGO_WEP1;
val = WEP_ENABLED;
brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_WEP40\n");
break;
case WLAN_CIPHER_SUITE_WEP104:
key.algo = CRYPTO_ALGO_WEP128;
key->algo = CRYPTO_ALGO_WEP128;
val = WEP_ENABLED;
brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_WEP104\n");
break;
case WLAN_CIPHER_SUITE_TKIP:
if (!brcmf_is_apmode(ifp->vif)) {
brcmf_dbg(CONN, "Swapping RX/TX MIC key\n");
memcpy(keybuf, &key.data[24], sizeof(keybuf));
memcpy(&key.data[24], &key.data[16], sizeof(keybuf));
memcpy(&key.data[16], keybuf, sizeof(keybuf));
memcpy(keybuf, &key->data[24], sizeof(keybuf));
memcpy(&key->data[24], &key->data[16], sizeof(keybuf));
memcpy(&key->data[16], keybuf, sizeof(keybuf));
}
key.algo = CRYPTO_ALGO_TKIP;
key->algo = CRYPTO_ALGO_TKIP;
val = TKIP_ENABLED;
brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_TKIP\n");
break;
case WLAN_CIPHER_SUITE_AES_CMAC:
key.algo = CRYPTO_ALGO_AES_CCM;
key->algo = CRYPTO_ALGO_AES_CCM;
val = AES_ENABLED;
brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_AES_CMAC\n");
break;
case WLAN_CIPHER_SUITE_CCMP:
key.algo = CRYPTO_ALGO_AES_CCM;
key->algo = CRYPTO_ALGO_AES_CCM;
val = AES_ENABLED;
brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_CCMP\n");
break;
......@@ -2189,7 +2197,7 @@ brcmf_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev,
goto done;
}
err = send_key_to_dongle(ndev, &key);
err = send_key_to_dongle(ifp, key);
if (err)
goto done;
......@@ -2222,7 +2230,7 @@ brcmf_cfg80211_del_key(struct wiphy *wiphy, struct net_device *ndev,
if (!check_vif_up(ifp->vif))
return -EIO;
if (key_idx >= DOT11_MAX_DEFAULT_KEYS) {
if (key_idx >= BRCMF_MAX_DEFAULT_KEYS) {
/* we ignore this key index in this case */
brcmf_err("invalid key index (%d)\n", key_idx);
return -EINVAL;
......@@ -2237,7 +2245,7 @@ brcmf_cfg80211_del_key(struct wiphy *wiphy, struct net_device *ndev,
brcmf_dbg(CONN, "key index (%d)\n", key_idx);
/* Set the new key/index */
err = send_key_to_dongle(ndev, &key);
err = send_key_to_dongle(ifp, &key);
brcmf_dbg(TRACE, "Exit\n");
return err;
......@@ -2305,6 +2313,39 @@ brcmf_cfg80211_config_default_mgmt_key(struct wiphy *wiphy,
return -EOPNOTSUPP;
}
static void
brcmf_cfg80211_reconfigure_wep(struct brcmf_if *ifp)
{
s32 err;
u8 key_idx;
struct brcmf_wsec_key *key;
s32 wsec;
for (key_idx = 0; key_idx < BRCMF_MAX_DEFAULT_KEYS; key_idx++) {
key = &ifp->vif->profile.key[key_idx];
if ((key->algo == CRYPTO_ALGO_WEP1) ||
(key->algo == CRYPTO_ALGO_WEP128))
break;
}
if (key_idx == BRCMF_MAX_DEFAULT_KEYS)
return;
err = send_key_to_dongle(ifp, key);
if (err) {
brcmf_err("Setting WEP key failed (%d)\n", err);
return;
}
err = brcmf_fil_bsscfg_int_get(ifp, "wsec", &wsec);
if (err) {
brcmf_err("get wsec error (%d)\n", err);
return;
}
wsec |= WEP_ENABLED;
err = brcmf_fil_bsscfg_int_set(ifp, "wsec", wsec);
if (err)
brcmf_err("set wsec error (%d)\n", err);
}
static s32
brcmf_cfg80211_get_station(struct wiphy *wiphy, struct net_device *ndev,
const u8 *mac, struct station_info *sinfo)
......@@ -4057,6 +4098,10 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev,
brcmf_err("BRCMF_C_UP error (%d)\n", err);
goto exit;
}
/* On DOWN the firmware removes the WEP keys, reconfigure
* them if they were set.
*/
brcmf_cfg80211_reconfigure_wep(ifp);
memset(&join_params, 0, sizeof(join_params));
/* join parameters starts with ssid */
......
......@@ -75,6 +75,8 @@
#define BRCMF_VNDR_IE_P2PAF_SHIFT 12
#define BRCMF_MAX_DEFAULT_KEYS 4
/**
* enum brcmf_scan_status - scan engine status
......@@ -125,11 +127,13 @@ struct brcmf_cfg80211_security {
* @ssid: ssid of associated/associating ap.
* @bssid: bssid of joined/joining ibss.
* @sec: security information.
* @key: key information
*/
struct brcmf_cfg80211_profile {
struct brcmf_ssid ssid;
u8 bssid[ETH_ALEN];
struct brcmf_cfg80211_security sec;
struct brcmf_wsec_key key[BRCMF_MAX_DEFAULT_KEYS];
};
/**
......
......@@ -1093,9 +1093,8 @@ static int brcmf_get_pend_8021x_cnt(struct brcmf_if *ifp)
return atomic_read(&ifp->pend_8021x_cnt);
}
int brcmf_netdev_wait_pend8021x(struct net_device *ndev)
int brcmf_netdev_wait_pend8021x(struct brcmf_if *ifp)
{
struct brcmf_if *ifp = netdev_priv(ndev);
int err;
err = wait_event_timeout(ifp->pend_8021x_wait,
......
......@@ -29,8 +29,6 @@
/* For supporting multiple interfaces */
#define BRCMF_MAX_IFS 16
#define DOT11_MAX_DEFAULT_KEYS 4
/* Small, medium and maximum buffer size for dcmd
*/
#define BRCMF_DCMD_SMLEN 256
......@@ -167,7 +165,7 @@ struct brcmf_skb_reorder_data {
u8 *reorder;
};
int brcmf_netdev_wait_pend8021x(struct net_device *ndev);
int brcmf_netdev_wait_pend8021x(struct brcmf_if *ifp);
/* Return pointer to interface name */
char *brcmf_ifname(struct brcmf_pub *drvr, int idx);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册