提交 115dad7a 编写于 作者: F Felix Fietkau 提交者: John W. Linville

ath9k_hw: partially revert "fix dma descriptor rx error bit parsing"

The rx error bit parsing was changed to consider PHY errors and various
decryption errors separately. While correct according to the documentation,
this is causing spurious decryption error reports in some situations.

Fix this by restoring the original order of the checks in those places,
where the errors are meant to be mutually exclusive.

If a CRC error is reported, then MIC failure and decryption errors
are irrelevant, and a PHY error is unlikely.
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 df6ba5d8
......@@ -615,7 +615,7 @@ int ath9k_hw_process_rxdesc_edma(struct ath_hw *ah, struct ath_rx_status *rxs,
*/
if (rxsp->status11 & AR_CRCErr)
rxs->rs_status |= ATH9K_RXERR_CRC;
if (rxsp->status11 & AR_PHYErr) {
else if (rxsp->status11 & AR_PHYErr) {
phyerr = MS(rxsp->status11, AR_PHYErrCode);
/*
* If we reach a point here where AR_PostDelimCRCErr is
......@@ -638,11 +638,11 @@ int ath9k_hw_process_rxdesc_edma(struct ath_hw *ah, struct ath_rx_status *rxs,
rxs->rs_phyerr = phyerr;
}
}
if (rxsp->status11 & AR_DecryptCRCErr)
} else if (rxsp->status11 & AR_DecryptCRCErr)
rxs->rs_status |= ATH9K_RXERR_DECRYPT;
if (rxsp->status11 & AR_MichaelErr)
else if (rxsp->status11 & AR_MichaelErr)
rxs->rs_status |= ATH9K_RXERR_MIC;
if (rxsp->status11 & AR_KeyMiss)
rxs->rs_status |= ATH9K_RXERR_DECRYPT;
}
......
......@@ -690,17 +690,23 @@ int ath9k_hw_rxprocdesc(struct ath_hw *ah, struct ath_desc *ds,
rs->rs_flags |= ATH9K_RX_DECRYPT_BUSY;
if ((ads.ds_rxstatus8 & AR_RxFrameOK) == 0) {
/*
* Treat these errors as mutually exclusive to avoid spurious
* extra error reports from the hardware. If a CRC error is
* reported, then decryption and MIC errors are irrelevant,
* the frame is going to be dropped either way
*/
if (ads.ds_rxstatus8 & AR_CRCErr)
rs->rs_status |= ATH9K_RXERR_CRC;
if (ads.ds_rxstatus8 & AR_PHYErr) {
else if (ads.ds_rxstatus8 & AR_PHYErr) {
rs->rs_status |= ATH9K_RXERR_PHY;
phyerr = MS(ads.ds_rxstatus8, AR_PHYErrCode);
rs->rs_phyerr = phyerr;
}
if (ads.ds_rxstatus8 & AR_DecryptCRCErr)
} else if (ads.ds_rxstatus8 & AR_DecryptCRCErr)
rs->rs_status |= ATH9K_RXERR_DECRYPT;
if (ads.ds_rxstatus8 & AR_MichaelErr)
else if (ads.ds_rxstatus8 & AR_MichaelErr)
rs->rs_status |= ATH9K_RXERR_MIC;
if (ads.ds_rxstatus8 & AR_KeyMiss)
rs->rs_status |= ATH9K_RXERR_DECRYPT;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册