提交 10440af1 编写于 作者: G Guennadi Liakhovetski 提交者: Paul Mundt

sh: define DMA slaves per CPU type, remove now redundant header

Now that DMA slave IDs are only used used in platform specific code and have
become opaque cookies for the rest of the code, we can make the, CPU specific
too.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
上级 2d151248
/*
* Header for the new SH dmaengine driver
*
* Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef ASM_DMAENGINE_H
#define ASM_DMAENGINE_H
#include <linux/sh_dma.h>
enum {
SHDMA_SLAVE_SCIF0_TX,
SHDMA_SLAVE_SCIF0_RX,
SHDMA_SLAVE_SCIF1_TX,
SHDMA_SLAVE_SCIF1_RX,
SHDMA_SLAVE_SCIF2_TX,
SHDMA_SLAVE_SCIF2_RX,
SHDMA_SLAVE_SCIF3_TX,
SHDMA_SLAVE_SCIF3_RX,
SHDMA_SLAVE_SCIF4_TX,
SHDMA_SLAVE_SCIF4_RX,
SHDMA_SLAVE_SCIF5_TX,
SHDMA_SLAVE_SCIF5_RX,
SHDMA_SLAVE_SIUA_TX,
SHDMA_SLAVE_SIUA_RX,
SHDMA_SLAVE_SIUB_TX,
SHDMA_SLAVE_SIUB_RX,
};
#endif
......@@ -11,8 +11,6 @@
#ifndef ASM_SIU_H
#define ASM_SIU_H
#include <asm/dmaengine.h>
struct device;
struct siu_platform {
......
......@@ -235,4 +235,19 @@ enum {
HWBLK_NR,
};
enum {
SHDMA_SLAVE_SCIF0_TX,
SHDMA_SLAVE_SCIF0_RX,
SHDMA_SLAVE_SCIF1_TX,
SHDMA_SLAVE_SCIF1_RX,
SHDMA_SLAVE_SCIF2_TX,
SHDMA_SLAVE_SCIF2_RX,
SHDMA_SLAVE_SIUA_TX,
SHDMA_SLAVE_SIUA_RX,
SHDMA_SLAVE_SIUB_TX,
SHDMA_SLAVE_SIUB_RX,
SHDMA_SLAVE_SDHI0_TX,
SHDMA_SLAVE_SDHI0_RX,
};
#endif /* __ASM_SH7722_H__ */
......@@ -283,4 +283,23 @@ enum {
HWBLK_NR,
};
enum {
SHDMA_SLAVE_SCIF0_TX,
SHDMA_SLAVE_SCIF0_RX,
SHDMA_SLAVE_SCIF1_TX,
SHDMA_SLAVE_SCIF1_RX,
SHDMA_SLAVE_SCIF2_TX,
SHDMA_SLAVE_SCIF2_RX,
SHDMA_SLAVE_SCIF3_TX,
SHDMA_SLAVE_SCIF3_RX,
SHDMA_SLAVE_SCIF4_TX,
SHDMA_SLAVE_SCIF4_RX,
SHDMA_SLAVE_SCIF5_TX,
SHDMA_SLAVE_SCIF5_RX,
SHDMA_SLAVE_SDHI0_TX,
SHDMA_SLAVE_SDHI0_RX,
SHDMA_SLAVE_SDHI1_TX,
SHDMA_SLAVE_SDHI1_RX,
};
#endif /* __ASM_SH7724_H__ */
......@@ -17,7 +17,6 @@
#include <linux/usb/m66592.h>
#include <asm/clock.h>
#include <asm/dmaengine.h>
#include <asm/mmzone.h>
#include <asm/siu.h>
......
......@@ -18,13 +18,13 @@
#include <linux/mm.h>
#include <linux/serial_sci.h>
#include <linux/uio_driver.h>
#include <linux/sh_dma.h>
#include <linux/sh_timer.h>
#include <linux/io.h>
#include <linux/notifier.h>
#include <asm/suspend.h>
#include <asm/clock.h>
#include <asm/dmaengine.h>
#include <asm/mmzone.h>
#include <cpu/dma-register.h>
......
......@@ -12,10 +12,9 @@
#include <linux/serial.h>
#include <linux/io.h>
#include <linux/serial_sci.h>
#include <linux/sh_dma.h>
#include <linux/sh_timer.h>
#include <asm/dmaengine.h>
#include <cpu/dma-register.h>
static struct plat_sci_port scif0_platform_data = {
......
......@@ -13,9 +13,9 @@
#include <linux/serial_sci.h>
#include <linux/io.h>
#include <linux/mm.h>
#include <linux/sh_dma.h>
#include <linux/sh_timer.h>
#include <asm/dmaengine.h>
#include <asm/mmzone.h>
#include <cpu/dma-register.h>
......
......@@ -71,8 +71,7 @@ struct siu_firmware {
#include <linux/dmaengine.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <asm/dmaengine.h>
#include <linux/sh_dma.h>
#include <sound/core.h>
#include <sound/pcm.h>
......
......@@ -31,7 +31,6 @@
#include <sound/pcm_params.h>
#include <sound/soc-dai.h>
#include <asm/dmaengine.h>
#include <asm/siu.h>
#include "siu.h"
......@@ -358,13 +357,13 @@ static int siu_pcm_open(struct snd_pcm_substream *ss)
if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK) {
siu_stream = &port_info->playback;
param = &siu_stream->param;
param->slave_id = port ? SHDMA_SLAVE_SIUB_TX :
SHDMA_SLAVE_SIUA_TX;
param->slave_id = port ? pdata->dma_slave_tx_b :
pdata->dma_slave_tx_a;
} else {
siu_stream = &port_info->capture;
param = &siu_stream->param;
param->slave_id = port ? SHDMA_SLAVE_SIUB_RX :
SHDMA_SLAVE_SIUA_RX;
param->slave_id = port ? pdata->dma_slave_rx_b :
pdata->dma_slave_rx_a;
}
param->dma_dev = pdata->dma_dev;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册