Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
大约 1 年 前同步成功

通知 158
Star 36
Fork 7
cloud-kernel
cloud-kernel

体验新版 GitCode，发现更多精彩内容 >>

提交 0fec53a2 编写于 作者: R Russell King 提交者： Russell King
浏览文件
操作

[ARM] Remove EPXA10DB machine support 

EPXA10DB seems to be uncared for:
- the "PLD" code has never been merged
- no one has reported that this platform has been broken since
  at least 2.6.10
- interest seems to have dried up around March 2003.

Therefore, remove EPXA10DB support.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
上级 b9abaa3f
展开全部 隐藏空白更改
内联 并排
Showing with 2 addition and 4973 deletion
arch/arm/Kconfig
浏览文件 @ 0fec53a2
......@@ -103,13 +103,6 @@ config ARCH_EBSA110
Ethernet interface, two PCMCIA sockets, two serial ports and a
parallel port.
config ARCH_CAMELOT
bool "Epxa10db"
help
This enables support for Altera's Excalibur XA10 development board.
If you would like to build your kernel to run on one of these boards
then you must say 'Y' here. Otherwise say 'N'
config ARCH_FOOTBRIDGE
bool "FootBridge"
select FOOTBRIDGE
......@@ -221,8 +214,6 @@ endchoice
source "arch/arm/mach-clps711x/Kconfig"
source "arch/arm/mach-epxa10db/Kconfig"
source "arch/arm/mach-footbridge/Kconfig"
source "arch/arm/mach-integrator/Kconfig"
......
arch/arm/Makefile
浏览文件 @ 0fec53a2
......@@ -84,7 +84,6 @@ endif
machine-$(CONFIG_ARCH_PXA) := pxa
machine-$(CONFIG_ARCH_L7200) := l7200
machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
machine-$(CONFIG_ARCH_CAMELOT) := epxa10db
textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000
machine-$(CONFIG_ARCH_CLPS711X) := clps711x
machine-$(CONFIG_ARCH_IOP3XX) := iop3xx
......
arch/arm/boot/compressed/Makefile
浏览文件 @ 0fec53a2
......@@ -21,10 +21,6 @@ ifeq ($(CONFIG_ARCH_SHARK),y)
OBJS += head-shark.o ofw-shark.o
endif
ifeq ($(CONFIG_ARCH_CAMELOT),y)
OBJS += head-epxa10db.o
endif
ifeq ($(CONFIG_ARCH_L7200),y)
OBJS += head-l7200.o
endif
......
arch/arm/boot/compressed/head-epxa10db.S 已删除 100644 → 0
浏览文件 @ b9abaa3f
#include <asm/mach-types.h>
#include <asm/arch/excalibur.h>
.section ".start", "ax"
mov r7, #MACH_TYPE_CAMELOT
arch/arm/configs/epxa10db_defconfig 已删除 100644 → 0
浏览文件 @ b9abaa3f
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.12-rc1-bk2
# Sun Mar 27 22:46:51 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_IOMAP=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
#
# System Type
#
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
CONFIG_ARCH_CAMELOT=y
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
#
# Epxa10db
#
#
# PLD hotswap support
#
CONFIG_PLD=y
# CONFIG_PLD_HOTSWAP is not set
#
# Processor Type
#
CONFIG_CPU_32=y
CONFIG_CPU_ARM922T=y
CONFIG_CPU_32v4=y
CONFIG_CPU_ABRT_EV4T=y
CONFIG_CPU_CACHE_V4WT=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WBI=y
#
# Processor Features
#
# CONFIG_ARM_THUMB is not set
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
#
# Bus support
#
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# Kernel Features
#
# CONFIG_PREEMPT is not set
CONFIG_ALIGNMENT_TRAP=y
#
# Boot options
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyUA0,115200 initrd=0x00200000,8M root=/dev/ram0 rw"
# CONFIG_XIP_KERNEL is not set
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
CONFIG_FPE_NWFPE=y
# CONFIG_FPE_NWFPE_XP is not set
# CONFIG_FPE_FASTFPE is not set
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_ARTHUR is not set
#
# Power management options
#
# CONFIG_PM is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# SCSI device support
#
# CONFIG_SCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
#
# IEEE 1394 (FireWire) support
#
#
# I2O device support
#
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_IP_TCPDIAG is not set
# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
#
# Ethernet (1000 Mbit)
#
#
# Ethernet (10000 Mbit)
#
#
# Token Ring devices
#
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_PPP_DEFLATE=y
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_UART00=y
CONFIG_SERIAL_UART00_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# Misc devices
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
CONFIG_SMB_FS=y
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_USER is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
#
# Library routines
#
CONFIG_CRC_CCITT=y
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
arch/arm/mach-epxa10db/Kconfig 已删除 100644 → 0
浏览文件 @ b9abaa3f
if ARCH_CAMELOT
menu "Epxa10db"
comment "PLD hotswap support"
config PLD
bool
default y
config PLD_HOTSWAP
bool "Support for PLD device hotplugging (experimental)"
depends on EXPERIMENTAL
help
This enables support for the dynamic loading and configuration of
compatible drivers when the contents of the PLD are changed. This
is still experimental and requires configuration tools which are
not yet generally available. Say N here. You must enable the kernel
module loader for this feature to work.
endmenu
endif
arch/arm/mach-epxa10db/Makefile 已删除 100644 → 0
浏览文件 @ b9abaa3f
#
# Makefile for the linux kernel.
#
# Object file lists.
obj-y := arch.o irq.o mm.o time.o
obj-m :=
obj-n :=
obj- :=
arch/arm/mach-epxa10db/arch.c 已删除 100644 → 0
浏览文件 @ b9abaa3f
/*
* linux/arch/arm/mach-epxa10db/arch.c
*
* Copyright (C) 2000 Deep Blue Solutions Ltd
* Copyright (C) 2001 Altera Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/types.h>
#include <linux/init.h>
#include <linux/serial_8250.h>
#include <asm/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
static struct plat_serial8250_port serial_platform_data[] = {
{
.iobase = 0x3f8,
.irq = IRQ_UARTINT0,
#error FIXME
.uartclk = 0,
.regshift = 0,
.iotype = UPIO_PORT,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
},
{
.iobase = 0x2f8,
.irq = IRQ_UARTINT1,
#error FIXME
.uartclk = 0,
.regshift = 0,
.iotype = UPIO_PORT,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
},
{ },
};
static struct platform_device serial_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = serial_platform_data,
},
};
extern void epxa10db_map_io(void);
extern void epxa10db_init_irq(void);
extern struct sys_timer epxa10db_timer;
MACHINE_START(CAMELOT, "Altera Epxa10db")
/* Maintainer: Altera Corporation */
.phys_ram = 0x00000000,
.phys_io = 0x7fffc000,
.io_pg_offst = ((0xffffc000) >> 18) & 0xfffc,
.map_io = epxa10db_map_io,
.init_irq = epxa10db_init_irq,
.timer = &epxa10db_timer,
MACHINE_END
arch/arm/mach-epxa10db/irq.c 已删除 100644 → 0
浏览文件 @ b9abaa3f
/*
* linux/arch/arm/mach-epxa10db/irq.c
*
* Copyright (C) 2001 Altera Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/stddef.h>
#include <linux/timer.h>
#include <linux/list.h>
#include <asm/io.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/arch/platform.h>
#include <asm/arch/int_ctrl00.h>
static void epxa_mask_irq(unsigned int irq)
{
writel(1 << irq, INT_MC(IO_ADDRESS(EXC_INT_CTRL00_BASE)));
}
static void epxa_unmask_irq(unsigned int irq)
{
writel(1 << irq, INT_MS(IO_ADDRESS(EXC_INT_CTRL00_BASE)));
}
static struct irqchip epxa_irq_chip = {
.ack = epxa_mask_irq,
.mask = epxa_mask_irq,
.unmask = epxa_unmask_irq,
};
static struct resource irq_resource = {
.name = "irq_handler",
.start = IO_ADDRESS(EXC_INT_CTRL00_BASE),
.end = IO_ADDRESS(INT_PRIORITY_FC(EXC_INT_CTRL00_BASE))+4,
};
void __init epxa10db_init_irq(void)
{
unsigned int i;
request_resource(&iomem_resource, &irq_resource);
/*
* This bit sets up the interrupt controller using
* the 6 PLD interrupts mode (the default) each
* irqs is assigned a priority which is the same
* as its interrupt number. This scheme is used because
* its easy, but you may want to change it depending
* on the contents of your PLD
*/
writel(3,INT_MODE(IO_ADDRESS(EXC_INT_CTRL00_BASE)));
for (i = 0; i < NR_IRQS; i++){
writel(i+1, INT_PRIORITY_P0(IO_ADDRESS(EXC_INT_CTRL00_BASE)) + (4*i));
set_irq_chip(i,&epxa_irq_chip);
set_irq_handler(i,do_level_IRQ);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
}
/* Disable all interrupts */
writel(-1,INT_MC(IO_ADDRESS(EXC_INT_CTRL00_BASE)));
}
arch/arm/mach-epxa10db/mm.c 已删除 100644 → 0
浏览文件 @ b9abaa3f
/*
* linux/arch/arm/mach-epxa10db/mm.c
*
* MM routines for Altera'a Epxa10db board
*
* Copyright (C) 2001 Altera Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/sizes.h>
#include <asm/page.h>
#include <asm/mach/map.h>
/* Page table mapping for I/O region */
static struct map_desc epxa10db_io_desc[] __initdata = {
{
.virtual = IO_ADDRESS(EXC_REGISTERS_BASE),
.pfn = __phys_to_pfn(EXC_REGISTERS_BASE),
.length = SZ_16K,
.type = MT_DEVICE
}, {
.virtual = IO_ADDRESS(EXC_PLD_BLOCK0_BASE),
.pfn = __phys_to_pfn(EXC_PLD_BLOCK0_BASE),
.length = SZ_16K,
.type = MT_DEVICE
}, {
.virtual = IO_ADDRESS(EXC_PLD_BLOCK1_BASE),
.pfn =__phys_to_pfn(EXC_PLD_BLOCK1_BASE),
.length = SZ_16K,
.type = MT_DEVICE
}, {
.virtual = IO_ADDRESS(EXC_PLD_BLOCK2_BASE),
.physical = __phys_to_pfn(EXC_PLD_BLOCK2_BASE),
.length = SZ_16K,
.type = MT_DEVICE
}, {
.virtual = IO_ADDRESS(EXC_PLD_BLOCK3_BASE),
.pfn = __phys_to_pfn(EXC_PLD_BLOCK3_BASE),
.length = SZ_16K,
.type = MT_DEVICE
}, {
.virtual = FLASH_VADDR(EXC_EBI_BLOCK0_BASE),
.pfn = __phys_to_pfn(EXC_EBI_BLOCK0_BASE),
.length = SZ_16M,
.type = MT_DEVICE
}
};
void __init epxa10db_map_io(void)
{
iotable_init(epxa10db_io_desc, ARRAY_SIZE(epxa10db_io_desc));
}
arch/arm/mach-epxa10db/time.c 已删除 100644 → 0
浏览文件 @ b9abaa3f
/*
* linux/arch/arm/mach-epxa10db/time.c
*
* Copyright (C) 2000 Deep Blue Solutions
* Copyright (C) 2001 Altera Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <asm/hardware.h>
#include <asm/system.h>
#include <asm/leds.h>
#include <asm/mach/time.h>
#define TIMER00_TYPE (volatile unsigned int*)
#include <asm/arch/timer00.h>
static int epxa10db_set_rtc(void)
{
return 1;
}
static int epxa10db_rtc_init(void)
{
set_rtc = epxa10db_set_rtc;
return 0;
}
__initcall(epxa10db_rtc_init);
/*
* IRQ handler for the timer
*/
static irqreturn_t
epxa10db_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
write_seqlock(&xtime_lock);
// ...clear the interrupt
*TIMER0_CR(IO_ADDRESS(EXC_TIMER00_BASE))|=TIMER0_CR_CI_MSK;
timer_tick(regs);
write_sequnlock(&xtime_lock);
return IRQ_HANDLED;
}
static struct irqaction epxa10db_timer_irq = {
.name = "Excalibur Timer Tick",
.flags = SA_INTERRUPT | SA_TIMER,
.handler = epxa10db_timer_interrupt,
};
/*
* Set up timer interrupt, and return the current time in seconds.
*/
static void __init epxa10db_timer_init(void)
{
/* Start the timer */
*TIMER0_LIMIT(IO_ADDRESS(EXC_TIMER00_BASE))=(unsigned int)(EXC_AHB2_CLK_FREQUENCY/200);
*TIMER0_PRESCALE(IO_ADDRESS(EXC_TIMER00_BASE))=1;
*TIMER0_CR(IO_ADDRESS(EXC_TIMER00_BASE))=TIMER0_CR_IE_MSK | TIMER0_CR_S_MSK;
setup_irq(IRQ_TIMER0, &epxa10db_timer_irq);
}
struct sys_timer epxa10db_timer = {
.init = epxa10db_timer_init,
};
arch/arm/mm/Kconfig
浏览文件 @ 0fec53a2
......@@ -83,8 +83,8 @@ config CPU_ARM920T
# ARM922T
config CPU_ARM922T
bool "Support ARM922T processor" if ARCH_INTEGRATOR
depends on ARCH_CAMELOT || ARCH_LH7A40X || ARCH_INTEGRATOR
default y if ARCH_CAMELOT || ARCH_LH7A40X
depends on ARCH_LH7A40X || ARCH_INTEGRATOR
default y if ARCH_LH7A40X
select CPU_32v4
select CPU_ABRT_EV4T
select CPU_CACHE_V4WT
......
drivers/mtd/maps/Kconfig
浏览文件 @ 0fec53a2
......@@ -473,14 +473,6 @@ config MTD_IXP2000
IXDP425 and Coyote. If you have an IXP2000 based board and
would like to use the flash chips on it, say 'Y'.
config MTD_EPXA10DB
tristate "CFI Flash device mapped on Epxa10db"
depends on MTD_CFI && MTD_PARTITIONS && ARCH_CAMELOT
help
This enables support for the flash devices on the Altera
Excalibur XA10 Development Board. If you are building a kernel
for on of these boards then you should say 'Y' otherwise say 'N'.
config MTD_FORTUNET
tristate "CFI Flash device mapped on the FortuNet board"
depends on MTD_CFI && MTD_PARTITIONS && SA1100_FORTUNET
......
drivers/mtd/maps/Makefile
浏览文件 @ 0fec53a2
......@@ -15,7 +15,6 @@ obj-$(CONFIG_MTD_CFI_FLAGADM) += cfi_flagadm.o
obj-$(CONFIG_MTD_CSTM_MIPS_IXX) += cstm_mips_ixx.o
obj-$(CONFIG_MTD_DC21285) += dc21285.o
obj-$(CONFIG_MTD_DILNETPC) += dilnetpc.o
obj-$(CONFIG_MTD_EPXA10DB) += epxa10db-flash.o
obj-$(CONFIG_MTD_IQ80310) += iq80310.o
obj-$(CONFIG_MTD_L440GX) += l440gx.o
obj-$(CONFIG_MTD_AMD76XROM) += amd76xrom.o
......
drivers/mtd/maps/epxa10db-flash.c 已删除 100644 → 0
浏览文件 @ b9abaa3f
/*
* Flash memory access on EPXA based devices
*
* (C) 2000 Nicolas Pitre <nico@cam.org>
* Copyright (C) 2001 Altera Corporation
* Copyright (C) 2001 Red Hat, Inc.
*
* $Id: epxa10db-flash.c,v 1.15 2005/11/07 11:14:27 gleixner Exp $
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
#include <asm/io.h>
#include <asm/hardware.h>
#ifdef CONFIG_EPXA10DB
#define BOARD_NAME "EPXA10DB"
#else
#define BOARD_NAME "EPXA1DB"
#endif
static int nr_parts = 0;
static struct mtd_partition *parts;
static struct mtd_info *mymtd;
static int epxa_default_partitions(struct mtd_info *master, struct mtd_partition **pparts);
static struct map_info epxa_map = {
.name = "EPXA flash",
.size = FLASH_SIZE,
.bankwidth = 2,
.phys = FLASH_START,
};
static const char *probes[] = { "RedBoot", "afs", NULL };
static int __init epxa_mtd_init(void)
{
int i;
printk(KERN_NOTICE "%s flash device: 0x%x at 0x%x\n", BOARD_NAME, FLASH_SIZE, FLASH_START);
epxa_map.virt = ioremap(FLASH_START, FLASH_SIZE);
if (!epxa_map.virt) {
printk("Failed to ioremap %s flash\n",BOARD_NAME);
return -EIO;
}
simple_map_init(&epxa_map);
mymtd = do_map_probe("cfi_probe", &epxa_map);
if (!mymtd) {
iounmap((void *)epxa_map.virt);
return -ENXIO;
}
mymtd->owner = THIS_MODULE;
/* Unlock the flash device. */
if(mymtd->unlock){
for (i=0; i<mymtd->numeraseregions;i++){
int j;
for(j=0;j<mymtd->eraseregions[i].numblocks;j++){
mymtd->unlock(mymtd,mymtd->eraseregions[i].offset + j * mymtd->eraseregions[i].erasesize,mymtd->eraseregions[i].erasesize);
}
}
}
#ifdef CONFIG_MTD_PARTITIONS
nr_parts = parse_mtd_partitions(mymtd, probes, &parts, 0);
if (nr_parts > 0) {
add_mtd_partitions(mymtd, parts, nr_parts);
return 0;
}
#endif
/* No recognised partitioning schemes found - use defaults */
nr_parts = epxa_default_partitions(mymtd, &parts);
if (nr_parts > 0) {
add_mtd_partitions(mymtd, parts, nr_parts);
return 0;
}
/* If all else fails... */
add_mtd_device(mymtd);
return 0;
}
static void __exit epxa_mtd_cleanup(void)
{
if (mymtd) {
if (nr_parts)
del_mtd_partitions(mymtd);
else
del_mtd_device(mymtd);
map_destroy(mymtd);
}
if (epxa_map.virt) {
iounmap((void *)epxa_map.virt);
epxa_map.virt = 0;
}
}
/*
* This will do for now, once we decide which bootldr we're finally
* going to use then we'll remove this function and do it properly
*
* Partions are currently (as offsets from base of flash):
* 0x00000000 - 0x003FFFFF - bootloader (!)
* 0x00400000 - 0x00FFFFFF - Flashdisk
*/
static int __init epxa_default_partitions(struct mtd_info *master, struct mtd_partition **pparts)
{
struct mtd_partition *parts;
int ret, i;
int npartitions = 0;
char *names;
const char *name = "jffs";
printk("Using default partitions for %s\n",BOARD_NAME);
npartitions=1;
parts = kmalloc(npartitions*sizeof(*parts)+strlen(name), GFP_KERNEL);
memzero(parts,npartitions*sizeof(*parts)+strlen(name));
if (!parts) {
ret = -ENOMEM;
goto out;
}
i=0;
names = (char *)&parts[npartitions];
parts[i].name = names;
names += strlen(name) + 1;
strcpy(parts[i].name, name);
#ifdef CONFIG_EPXA10DB
parts[i].size = FLASH_SIZE-0x00400000;
parts[i].offset = 0x00400000;
#else
parts[i].size = FLASH_SIZE-0x00180000;
parts[i].offset = 0x00180000;
#endif
out:
*pparts = parts;
return npartitions;
}
module_init(epxa_mtd_init);
module_exit(epxa_mtd_cleanup);
MODULE_AUTHOR("Clive Davies");
MODULE_DESCRIPTION("Altera epxa mtd flash map");
MODULE_LICENSE("GPL");
drivers/net/arm/Kconfig
浏览文件 @ 0fec53a2
......@@ -31,16 +31,3 @@ config ARM_ETHERH
help
If you have an Acorn system with one of these network cards, you
should say Y to this option if you wish to use it with Linux.
config ARM_ETHER00
tristate "Altera Ether00 support"
depends on NET_ETHERNET && ARM && ARCH_CAMELOT
help
This is the driver for Altera's ether00 ethernet mac IP core. Say
Y here if you want to build support for this into the kernel. It
is also available as a module (say M here) that can be inserted/
removed from the kernel at the same time as the PLD is configured.
If this driver is running on an epxa10 development board then it
will generate a suitable hw address based on the board serial
number (MTD support is required for this). Otherwise you will
need to set a suitable hw address using ifconfig.
drivers/net/arm/Makefile
浏览文件 @ 0fec53a2
......@@ -4,7 +4,6 @@
#
obj-$(CONFIG_ARM_AM79C961A) += am79c961a.o
obj-$(CONFIG_ARM_ETHER00) += ether00.o
obj-$(CONFIG_ARM_ETHERH) += etherh.o
obj-$(CONFIG_ARM_ETHER3) += ether3.o
obj-$(CONFIG_ARM_ETHER1) += ether1.o
drivers/net/arm/ether00.c 已删除 100644 → 0
浏览文件 @ b9abaa3f
此差异已折叠。
drivers/serial/Kconfig
浏览文件 @ 0fec53a2
......@@ -359,29 +359,6 @@ config SERIAL_21285_CONSOLE
your boot loader (lilo or loadlin) about how to pass options to the
kernel at boot time.)
config SERIAL_UART00
bool "Excalibur serial port (uart00) support"
depends on ARM && ARCH_CAMELOT
select SERIAL_CORE
help
Say Y here if you want to use the hard logic uart on Excalibur. This
driver also supports soft logic implementations of this uart core.
config SERIAL_UART00_CONSOLE
bool "Support for console on Excalibur serial port"
depends on SERIAL_UART00
select SERIAL_CORE_CONSOLE
help
Say Y here if you want to support a serial console on an Excalibur
hard logic uart or uart00 IP core.
Even if you say Y here, the currently visible virtual console
(/dev/tty0) will still be used as the system console by default, but
you can alter that using a kernel command line option such as
"console=ttyS1". (Try "man bootparam" or see the documentation of
your boot loader (lilo or loadlin) about how to pass options to the
kernel at boot time.)
config SERIAL_MPSC
bool "Marvell MPSC serial port support"
depends on PPC32 && MV64X60
......
drivers/serial/Makefile
浏览文件 @ 0fec53a2
......@@ -29,7 +29,6 @@ obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
obj-$(CONFIG_SERIAL_PXA) += pxa.o
obj-$(CONFIG_SERIAL_SA1100) += sa1100.o
obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o
obj-$(CONFIG_SERIAL_UART00) += uart00.o
obj-$(CONFIG_SERIAL_SUNCORE) += suncore.o
obj-$(CONFIG_SERIAL_SUNZILOG) += sunzilog.o
obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
......
drivers/serial/uart00.c 已删除 100644 → 0
浏览文件 @ b9abaa3f
/*
* linux/drivers/serial/uart00.c
*
* Driver for UART00 serial ports
*
* Based on drivers/char/serial_amba.c, by ARM Limited &
* Deep Blue Solutions Ltd.
* Copyright 2001 Altera Corporation
*
* Update for 2.6.4 by Dirk Behme <dirk.behme@de.bosch.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* $Id: uart00.c,v 1.35 2002/07/28 10:03:28 rmk Exp $
*
*/
#include <linux/config.h>
#if defined(CONFIG_SERIAL_UART00_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
#endif
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/sysrq.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/sizes.h>
#include <asm/arch/excalibur.h>
#define UART00_TYPE (volatile unsigned int*)
#include <asm/arch/uart00.h>
#include <asm/arch/int_ctrl00.h>
#define UART_NR 2
#define SERIAL_UART00_NAME "ttyUA"
#define SERIAL_UART00_MAJOR 204
#define SERIAL_UART00_MINOR 16 /* Temporary - will change in future */
#define SERIAL_UART00_NR UART_NR
#define UART_PORT_SIZE 0x50
#define UART00_ISR_PASS_LIMIT 256
/*
* Access macros for the UART00 UARTs
*/
#define UART_GET_INT_STATUS(p) inl(UART_ISR((p)->membase))
#define UART_PUT_IES(p, c) outl(c,UART_IES((p)->membase))
#define UART_GET_IES(p) inl(UART_IES((p)->membase))
#define UART_PUT_IEC(p, c) outl(c,UART_IEC((p)->membase))
#define UART_GET_IEC(p) inl(UART_IEC((p)->membase))
#define UART_PUT_CHAR(p, c) outl(c,UART_TD((p)->membase))
#define UART_GET_CHAR(p) inl(UART_RD((p)->membase))
#define UART_GET_RSR(p) inl(UART_RSR((p)->membase))
#define UART_GET_RDS(p) inl(UART_RDS((p)->membase))
#define UART_GET_MSR(p) inl(UART_MSR((p)->membase))
#define UART_GET_MCR(p) inl(UART_MCR((p)->membase))
#define UART_PUT_MCR(p, c) outl(c,UART_MCR((p)->membase))
#define UART_GET_MC(p) inl(UART_MC((p)->membase))
#define UART_PUT_MC(p, c) outl(c,UART_MC((p)->membase))
#define UART_GET_TSR(p) inl(UART_TSR((p)->membase))
#define UART_GET_DIV_HI(p) inl(UART_DIV_HI((p)->membase))
#define UART_PUT_DIV_HI(p,c) outl(c,UART_DIV_HI((p)->membase))
#define UART_GET_DIV_LO(p) inl(UART_DIV_LO((p)->membase))
#define UART_PUT_DIV_LO(p,c) outl(c,UART_DIV_LO((p)->membase))
#define UART_RX_DATA(s) ((s) & UART_RSR_RX_LEVEL_MSK)
#define UART_TX_READY(s) (((s) & UART_TSR_TX_LEVEL_MSK) < 15)
//#define UART_TX_EMPTY(p) ((UART_GET_FR(p) & UART00_UARTFR_TMSK) == 0)
static void uart00_stop_tx(struct uart_port *port)
{
UART_PUT_IEC(port, UART_IEC_TIE_MSK);
}
static void uart00_stop_rx(struct uart_port *port)
{
UART_PUT_IEC(port, UART_IEC_RE_MSK);
}
static void uart00_enable_ms(struct uart_port *port)
{
UART_PUT_IES(port, UART_IES_ME_MSK);
}
static void
uart00_rx_chars(struct uart_port *port, struct pt_regs *regs)
{
struct tty_struct *tty = port->info->tty;
unsigned int status, ch, rds, flg, ignored = 0;
status = UART_GET_RSR(port);
while (UART_RX_DATA(status)) {
/*
* We need to read rds before reading the
* character from the fifo
*/
rds = UART_GET_RDS(port);
ch = UART_GET_CHAR(port);
port->icount.rx++;
if (tty->flip.count >= TTY_FLIPBUF_SIZE)
goto ignore_char;
flg = TTY_NORMAL;
/*
* Note that the error handling code is
* out of the main execution path
*/
if (rds & (UART_RDS_BI_MSK |UART_RDS_FE_MSK|
UART_RDS_PE_MSK |UART_RDS_PE_MSK))
goto handle_error;
if (uart_handle_sysrq_char(port, ch, regs))
goto ignore_char;
error_return:
tty_insert_flip_char(tty, ch, flg);
ignore_char:
status = UART_GET_RSR(port);
}
out:
tty_flip_buffer_push(tty);
return;
handle_error:
if (rds & UART_RDS_BI_MSK) {
status &= ~(UART_RDS_FE_MSK | UART_RDS_PE_MSK);
port->icount.brk++;
if (uart_handle_break(port))
goto ignore_char;
} else if (rds & UART_RDS_PE_MSK)
port->icount.parity++;
else if (rds & UART_RDS_FE_MSK)
port->icount.frame++;
if (rds & UART_RDS_OE_MSK)
port->icount.overrun++;
if (rds & port->ignore_status_mask) {
if (++ignored > 100)
goto out;
goto ignore_char;
}
rds &= port->read_status_mask;
if (rds & UART_RDS_BI_MSK)
flg = TTY_BREAK;
else if (rds & UART_RDS_PE_MSK)
flg = TTY_PARITY;
else if (rds & UART_RDS_FE_MSK)
flg = TTY_FRAME;
if (rds & UART_RDS_OE_MSK) {
/*
* CHECK: does overrun affect the current character?
* ASSUMPTION: it does not.
*/
tty_insert_flip_char(tty, ch, flg);
ch = 0;
flg = TTY_OVERRUN;
}
#ifdef SUPPORT_SYSRQ
port->sysrq = 0;
#endif
goto error_return;
}
static void uart00_tx_chars(struct uart_port *port)
{
struct circ_buf *xmit = &port->info->xmit;
int count;
if (port->x_char) {
while ((UART_GET_TSR(port) & UART_TSR_TX_LEVEL_MSK) == 15)
barrier();
UART_PUT_CHAR(port, port->x_char);
port->icount.tx++;
port->x_char = 0;
return;
}
if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
uart00_stop_tx(port);
return;
}
count = port->fifosize >> 1;
do {
while ((UART_GET_TSR(port) & UART_TSR_TX_LEVEL_MSK) == 15)
barrier();
UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
port->icount.tx++;
if (uart_circ_empty(xmit))
break;
} while (--count > 0);
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
if (uart_circ_empty(xmit))
uart00_stop_tx(port);
}
static void uart00_start_tx(struct uart_port *port)
{
UART_PUT_IES(port, UART_IES_TIE_MSK);
uart00_tx_chars(port);
}
static void uart00_modem_status(struct uart_port *port)
{
unsigned int status;
status = UART_GET_MSR(port);
if (!(status & (UART_MSR_DCTS_MSK | UART_MSR_DDSR_MSK |
UART_MSR_TERI_MSK | UART_MSR_DDCD_MSK)))
return;
if (status & UART_MSR_DDCD_MSK)
uart_handle_dcd_change(port, status & UART_MSR_DCD_MSK);
if (status & UART_MSR_DDSR_MSK)
port->icount.dsr++;
if (status & UART_MSR_DCTS_MSK)
uart_handle_cts_change(port, status & UART_MSR_CTS_MSK);
wake_up_interruptible(&port->info->delta_msr_wait);
}
static irqreturn_t uart00_int(int irq, void *dev_id, struct pt_regs *regs)
{
struct uart_port *port = dev_id;
unsigned int status, pass_counter = 0;
status = UART_GET_INT_STATUS(port);
do {
if (status & UART_ISR_RI_MSK)
uart00_rx_chars(port, regs);
if (status & UART_ISR_MI_MSK)
uart00_modem_status(port);
if (status & (UART_ISR_TI_MSK | UART_ISR_TII_MSK))
uart00_tx_chars(port);
if (pass_counter++ > UART00_ISR_PASS_LIMIT)
break;
status = UART_GET_INT_STATUS(port);
} while (status);
return IRQ_HANDLED;
}
static unsigned int uart00_tx_empty(struct uart_port *port)
{
return UART_GET_TSR(port) & UART_TSR_TX_LEVEL_MSK? 0 : TIOCSER_TEMT;
}
static unsigned int uart00_get_mctrl(struct uart_port *port)
{
unsigned int result = 0;
unsigned int status;
status = UART_GET_MSR(port);
if (status & UART_MSR_DCD_MSK)
result |= TIOCM_CAR;
if (status & UART_MSR_DSR_MSK)
result |= TIOCM_DSR;
if (status & UART_MSR_CTS_MSK)
result |= TIOCM_CTS;
if (status & UART_MSR_RI_MSK)
result |= TIOCM_RI;
return result;
}
static void uart00_set_mctrl_null(struct uart_port *port, unsigned int mctrl)
{
}
static void uart00_break_ctl(struct uart_port *port, int break_state)
{
unsigned long flags;
unsigned int mcr;
spin_lock_irqsave(&port->lock, flags);
mcr = UART_GET_MCR(port);
if (break_state == -1)
mcr |= UART_MCR_BR_MSK;
else
mcr &= ~UART_MCR_BR_MSK;
UART_PUT_MCR(port, mcr);
spin_unlock_irqrestore(&port->lock, flags);
}
static void
uart00_set_termios(struct uart_port *port, struct termios *termios,
struct termios *old)
{
unsigned int uart_mc, old_ies, baud, quot;
unsigned long flags;
/*
* We don't support CREAD (yet)
*/
termios->c_cflag |= CREAD;
/*
* Ask the core to calculate the divisor for us.
*/
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
quot = uart_get_divisor(port, baud);
/* byte size and parity */
switch (termios->c_cflag & CSIZE) {
case CS5:
uart_mc = UART_MC_CLS_CHARLEN_5;
break;
case CS6:
uart_mc = UART_MC_CLS_CHARLEN_6;
break;
case CS7:
uart_mc = UART_MC_CLS_CHARLEN_7;
break;
default: // CS8
uart_mc = UART_MC_CLS_CHARLEN_8;
break;
}
if (termios->c_cflag & CSTOPB)
uart_mc|= UART_MC_ST_TWO;
if (termios->c_cflag & PARENB) {
uart_mc |= UART_MC_PE_MSK;
if (!(termios->c_cflag & PARODD))
uart_mc |= UART_MC_EP_MSK;
}
spin_lock_irqsave(&port->lock, flags);
/*
* Update the per-port timeout.
*/
uart_update_timeout(port, termios->c_cflag, baud);
port->read_status_mask = UART_RDS_OE_MSK;
if (termios->c_iflag & INPCK)
port->read_status_mask |= UART_RDS_FE_MSK | UART_RDS_PE_MSK;
if (termios->c_iflag & (BRKINT | PARMRK))
port->read_status_mask |= UART_RDS_BI_MSK;
/*
* Characters to ignore
*/
port->ignore_status_mask = 0;
if (termios->c_iflag & IGNPAR)
port->ignore_status_mask |= UART_RDS_FE_MSK | UART_RDS_PE_MSK;
if (termios->c_iflag & IGNBRK) {
port->ignore_status_mask |= UART_RDS_BI_MSK;
/*
* If we're ignoring parity and break indicators,
* ignore overruns to (for real raw support).
*/
if (termios->c_iflag & IGNPAR)
port->ignore_status_mask |= UART_RDS_OE_MSK;
}
/* first, disable everything */
old_ies = UART_GET_IES(port);
if (UART_ENABLE_MS(port, termios->c_cflag))
old_ies |= UART_IES_ME_MSK;
/* Set baud rate */
UART_PUT_DIV_LO(port, (quot & 0xff));
UART_PUT_DIV_HI(port, ((quot & 0xf00) >> 8));
UART_PUT_MC(port, uart_mc);
UART_PUT_IES(port, old_ies);
spin_unlock_irqrestore(&port->lock, flags);
}
static int uart00_startup(struct uart_port *port)
{
int result;
/*
* Allocate the IRQ
*/
result = request_irq(port->irq, uart00_int, 0, "uart00", port);
if (result) {
printk(KERN_ERR "Request of irq %d failed\n", port->irq);
return result;
}
/*
* Finally, enable interrupts. Use the TII interrupt to minimise
* the number of interrupts generated. If higher performance is
* needed, consider using the TI interrupt with a suitable FIFO
* threshold
*/
UART_PUT_IES(port, UART_IES_RE_MSK | UART_IES_TIE_MSK);
return 0;
}
static void uart00_shutdown(struct uart_port *port)
{
/*
* disable all interrupts, disable the port
*/
UART_PUT_IEC(port, 0xff);
/* disable break condition and fifos */
UART_PUT_MCR(port, UART_GET_MCR(port) &~UART_MCR_BR_MSK);
/*
* Free the interrupt
*/
free_irq(port->irq, port);
}
static const char *uart00_type(struct uart_port *port)
{
return port->type == PORT_UART00 ? "Altera UART00" : NULL;
}
/*
* Release the memory region(s) being used by 'port'
*/
static void uart00_release_port(struct uart_port *port)
{
release_mem_region(port->mapbase, UART_PORT_SIZE);
#ifdef CONFIG_ARCH_CAMELOT
if (port->membase != (void*)IO_ADDRESS(EXC_UART00_BASE)) {
iounmap(port->membase);
}
#endif
}
/*
* Request the memory region(s) being used by 'port'
*/
static int uart00_request_port(struct uart_port *port)
{
return request_mem_region(port->mapbase, UART_PORT_SIZE, "serial_uart00")
!= NULL ? 0 : -EBUSY;
}
/*
* Configure/autoconfigure the port.
*/
static void uart00_config_port(struct uart_port *port, int flags)
{
/*
* Map the io memory if this is a soft uart
*/
if (!port->membase)
port->membase = ioremap_nocache(port->mapbase,SZ_4K);
if (!port->membase)
printk(KERN_ERR "serial00: cannot map io memory\n");
else
port->type = PORT_UART00;
}
/*
* verify the new serial_struct (for TIOCSSERIAL).
*/
static int uart00_verify_port(struct uart_port *port, struct serial_struct *ser)
{
int ret = 0;
if (ser->type != PORT_UNKNOWN && ser->type != PORT_UART00)
ret = -EINVAL;
if (ser->irq < 0 || ser->irq >= NR_IRQS)
ret = -EINVAL;
if (ser->baud_base < 9600)
ret = -EINVAL;
return ret;
}
static struct uart_ops uart00_pops = {
.tx_empty = uart00_tx_empty,
.set_mctrl = uart00_set_mctrl_null,
.get_mctrl = uart00_get_mctrl,
.stop_tx = uart00_stop_tx,
.start_tx = uart00_start_tx,
.stop_rx = uart00_stop_rx,
.enable_ms = uart00_enable_ms,
.break_ctl = uart00_break_ctl,
.startup = uart00_startup,
.shutdown = uart00_shutdown,
.set_termios = uart00_set_termios,
.type = uart00_type,
.release_port = uart00_release_port,
.request_port = uart00_request_port,
.config_port = uart00_config_port,
.verify_port = uart00_verify_port,
};
#ifdef CONFIG_ARCH_CAMELOT
static struct uart_port epxa10db_port = {
.membase = (void*)IO_ADDRESS(EXC_UART00_BASE),
.mapbase = EXC_UART00_BASE,
.iotype = SERIAL_IO_MEM,
.irq = IRQ_UART,
.uartclk = EXC_AHB2_CLK_FREQUENCY,
.fifosize = 16,
.ops = &uart00_pops,
.flags = ASYNC_BOOT_AUTOCONF,
};
#endif
#ifdef CONFIG_SERIAL_UART00_CONSOLE
static void uart00_console_write(struct console *co, const char *s, unsigned count)
{
#ifdef CONFIG_ARCH_CAMELOT
struct uart_port *port = &epxa10db_port;
unsigned int status, old_ies;
int i;
/*
* First save the CR then disable the interrupts
*/
old_ies = UART_GET_IES(port);
UART_PUT_IEC(port,0xff);
/*
* Now, do each character
*/
for (i = 0; i < count; i++) {
do {
status = UART_GET_TSR(port);
} while (!UART_TX_READY(status));
UART_PUT_CHAR(port, s[i]);
if (s[i] == '\n') {
do {
status = UART_GET_TSR(port);
} while (!UART_TX_READY(status));
UART_PUT_CHAR(port, '\r');
}
}
/*
* Finally, wait for transmitter to become empty
* and restore the IES
*/
do {
status = UART_GET_TSR(port);
} while (status & UART_TSR_TX_LEVEL_MSK);
UART_PUT_IES(port, old_ies);
#endif
}
static void __init
uart00_console_get_options(struct uart_port *port, int *baud,
int *parity, int *bits)
{
unsigned int uart_mc, quot;
uart_mc = UART_GET_MC(port);
*parity = 'n';
if (uart_mc & UART_MC_PE_MSK) {
if (uart_mc & UART_MC_EP_MSK)
*parity = 'e';
else
*parity = 'o';
}
switch (uart_mc & UART_MC_CLS_MSK) {
case UART_MC_CLS_CHARLEN_5:
*bits = 5;
break;
case UART_MC_CLS_CHARLEN_6:
*bits = 6;
break;
case UART_MC_CLS_CHARLEN_7:
*bits = 7;
break;
case UART_MC_CLS_CHARLEN_8:
*bits = 8;
break;
}
quot = UART_GET_DIV_LO(port) | (UART_GET_DIV_HI(port) << 8);
*baud = port->uartclk / (16 *quot );
}
static int __init uart00_console_setup(struct console *co, char *options)
{
struct uart_port *port;
int baud = 115200;
int bits = 8;
int parity = 'n';
int flow = 'n';
#ifdef CONFIG_ARCH_CAMELOT
port = &epxa10db_port; ;
#else
return -ENODEV;
#endif
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
else
uart00_console_get_options(port, &baud, &parity, &bits);
return uart_set_options(port, co, baud, parity, bits, flow);
}
extern struct uart_driver uart00_reg;
static struct console uart00_console = {
.name = SERIAL_UART00_NAME,
.write = uart00_console_write,
.device = uart_console_device,
.setup = uart00_console_setup,
.flags = CON_PRINTBUFFER,
.index = 0,
.data = &uart00_reg,
};
static int __init uart00_console_init(void)
{
register_console(&uart00_console);
return 0;
}
console_initcall(uart00_console_init);
#define UART00_CONSOLE &uart00_console
#else
#define UART00_CONSOLE NULL
#endif
static struct uart_driver uart00_reg = {
.owner = NULL,
.driver_name = SERIAL_UART00_NAME,
.dev_name = SERIAL_UART00_NAME,
.major = SERIAL_UART00_MAJOR,
.minor = SERIAL_UART00_MINOR,
.nr = UART_NR,
.cons = UART00_CONSOLE,
};
struct dev_port_entry{
unsigned int base_addr;
struct uart_port *port;
};
#ifdef CONFIG_PLD_HOTSWAP
static struct dev_port_entry dev_port_map[UART_NR];
/*
* Keep a mapping of dev_info addresses -> port lines to use when
* removing ports dev==NULL indicates unused entry
*/
struct uart00_ps_data{
unsigned int clk;
unsigned int fifosize;
};
int uart00_add_device(struct pldhs_dev_info* dev_info, void* dev_ps_data)
{
struct uart00_ps_data* dev_ps=dev_ps_data;
struct uart_port * port;
int i,result;
i=0;
while(dev_port_map[i].port)
i++;
if(i==UART_NR){
printk(KERN_WARNING "uart00: Maximum number of ports reached\n");
return 0;
}
port=kmalloc(sizeof(struct uart_port),GFP_KERNEL);
if(!port)
return -ENOMEM;
printk("clk=%d fifo=%d\n",dev_ps->clk,dev_ps->fifosize);
port->membase=0;
port->mapbase=dev_info->base_addr;
port->iotype=SERIAL_IO_MEM;
port->irq=dev_info->irq;
port->uartclk=dev_ps->clk;
port->fifosize=dev_ps->fifosize;
port->ops=&uart00_pops;
port->line=i;
port->flags=ASYNC_BOOT_AUTOCONF;
result=uart_add_one_port(&uart00_reg, port);
if(result){
printk("uart_add_one_port returned %d\n",result);
return result;
}
dev_port_map[i].base_addr=dev_info->base_addr;
dev_port_map[i].port=port;
printk("uart00: added device at %x as ttyUA%d\n",dev_port_map[i].base_addr,i);
return 0;
}
int uart00_remove_devices(void)
{
int i,result;
result=0;
for(i=1;i<UART_NR;i++){
if(dev_port_map[i].base_addr){
result=uart_remove_one_port(&uart00_reg, dev_port_map[i].port);
if(result)
return result;
/* port removed sucessfully, so now tidy up */
kfree(dev_port_map[i].port);
dev_port_map[i].base_addr=0;
dev_port_map[i].port=NULL;
}
}
return 0;
}
struct pld_hotswap_ops uart00_pldhs_ops={
.name = "uart00",
.add_device = uart00_add_device,
.remove_devices = uart00_remove_devices,
};
#endif
static int __init uart00_init(void)
{
int result;
printk(KERN_INFO "Serial: UART00 driver $Revision: 1.35 $\n");
printk(KERN_WARNING "serial_uart00:Using temporary major/minor pairs"
" - these WILL change in the future\n");
result = uart_register_driver(&uart00_reg);
if (result)
return result;
#ifdef CONFIG_ARCH_CAMELOT
result = uart_add_one_port(&uart00_reg,&epxa10db_port);
#endif
if (result)
uart_unregister_driver(&uart00_reg);
#ifdef CONFIG_PLD_HOTSWAP
pldhs_register_driver(&uart00_pldhs_ops);
#endif
return result;
}
__initcall(uart00_init);
include/asm-arm/arch-epxa10db/debug-macro.S 已删除 100644 → 0
浏览文件 @ b9abaa3f
/* linux/include/asm-arm/arch-epxa10db/debug-macro.S
*
* Debugging macro include header
*
* Copyright (C) 1994-1999 Russell King
* Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <asm/arch/excalibur.h>
#define UART00_TYPE
#include <asm/arch/uart00.h>
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldr \rx, =EXC_UART00_BASE @ physical base address
orrne \rx, \rx, #0xff000000 @ virtual base
orrne \rx, \rx, #0x00f00000
.endm
.macro senduart,rd,rx
str \rd, [\rx, #UART_TD(0)]
.endm
.macro waituart,rd,rx
1001: ldr \rd, [\rx, #UART_TSR(0)]
and \rd, \rd, #UART_TSR_TX_LEVEL_MSK
cmp \rd, #15
beq 1001b
.endm
.macro busyuart,rd,rx
1001: ldr \rd, [\rx, #UART_TSR(0)]
ands \rd, \rd, #UART_TSR_TX_LEVEL_MSK
bne 1001b
.endm
include/asm-arm/arch-epxa10db/dma.h 已删除 100644 → 0
浏览文件 @ b9abaa3f
/*
* linux/include/asm-arm/arch-camelot/dma.h
*
* Copyright (C) 1997,1998 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
include/asm-arm/arch-epxa10db/entry-macro.S 已删除 100644 → 0
浏览文件 @ b9abaa3f
/*
* include/asm-arm/arch-epxa10db/entry-macro.S
*
* Low-level IRQ helper macros for epxa10db platform
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <asm/arch/platform.h>
#undef IRQ_MODE /* same name defined in asm/proc/ptrace.h */
#include <asm/arch/int_ctrl00.h>
.macro disable_fiq
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, =INT_ID(IO_ADDRESS(EXC_INT_CTRL00_BASE))
ldr \irqnr,[\irqstat]
cmp \irqnr,#0
subne \irqnr,\irqnr,#1
.endm
include/asm-arm/arch-epxa10db/ether00.h 已删除 100644 → 0
浏览文件 @ b9abaa3f
#ifndef __ETHER00_H
#define __ETHER00_H
/*
* Register definitions for the Ethernet MAC
*/
/*
* Copyright (c) Altera Corporation 2000.
* All rights reserved.
*/
/*
* Structures for the DMA controller
*/
typedef struct fda_desc
{
struct fda_desc * FDNext;
long FDSystem;
long FDStat;
short FDLength;
short FDCtl;
}FDA_DESC;
typedef struct buf_desc
{
char * BuffData;
short BuffLength;
char BDStat;
char BDCtl;
}BUF_DESC;
/*
* Control masks for the DMA controller
*/
#define FDCTL_BDCOUNT_MSK (0x1F)
#define FDCTL_BDCOUNT_OFST (0)
#define FDCTL_FRMOPT_MSK (0x7C00)
#define FDCTL_FRMOPT_OFST (10)
#define FDCTL_COWNSFD_MSK (0x8000)
#define FDCTL_COWNSFD_OFST (15)
#define BDCTL_RXBDSEQN_MSK (0x7F)
#define BDCTL_RXBDSEQN_OFST (0)
#define BDCTL_COWNSBD_MSK (0x80)
#define BDCTL_COWNSBD_OFST (7)
#define FDNEXT_EOL_MSK (0x1)
#define FDNEXT_EOL_OFST (0)
#define FDNEXT_EOL_POINTER_MSK (0xFFFFFFF0)
#define FDNEXT_EOL_POINTER_OFST (4)
#define ETHER_ARC_SIZE (21)
/*
* Register definitions and masks
*/
#define ETHER_DMA_CTL(base) (ETHER00_TYPE (base + 0x100))
#define ETHER_DMA_CTL_DMBURST_OFST (2)
#define ETHER_DMA_CTL_DMBURST_MSK (0x1FC)
#define ETHER_DMA_CTL_POWRMGMNT_OFST (11)
#define ETHER_DMA_CTL_POWRMGMNT_MSK (0x1000)
#define ETHER_DMA_CTL_TXBIGE_OFST (14)
#define ETHER_DMA_CTL_TXBIGE_MSK (0x4000)
#define ETHER_DMA_CTL_RXBIGE_OFST (15)
#define ETHER_DMA_CTL_RXBIGE_MSK (0x8000)
#define ETHER_DMA_CTL_TXWAKEUP_OFST (16)
#define ETHER_DMA_CTL_TXWAKEUP_MSK (0x10000)
#define ETHER_DMA_CTL_SWINTREQ_OFST (17)
#define ETHER_DMA_CTL_SWINTREQ_MSK (0x20000)
#define ETHER_DMA_CTL_INTMASK_OFST (18)
#define ETHER_DMA_CTL_INTMASK_MSK (0x40000)
#define ETHER_DMA_CTL_M66ENSTAT_OFST (19)
#define ETHER_DMA_CTL_M66ENSTAT_MSK (0x80000)
#define ETHER_DMA_CTL_RMTXINIT_OFST (20)
#define ETHER_DMA_CTL_RMTXINIT_MSK (0x100000)
#define ETHER_DMA_CTL_RMRXINIT_OFST (21)
#define ETHER_DMA_CTL_RMRXINIT_MSK (0x200000)
#define ETHER_DMA_CTL_RXALIGN_OFST (22)
#define ETHER_DMA_CTL_RXALIGN_MSK (0xC00000)
#define ETHER_DMA_CTL_RMSWRQ_OFST (24)
#define ETHER_DMA_CTL_RMSWRQ_MSK (0x1000000)
#define ETHER_DMA_CTL_RMEMBANK_OFST (25)
#define ETHER_DMA_CTL_RMEMBANK_MSK (0x2000000)
#define ETHER_TXFRMPTR(base) (ETHER00_TYPE (base + 0x104))
#define ETHER_TXTHRSH(base) (ETHER00_TYPE (base + 0x308))
#define ETHER_TXPOLLCTR(base) (ETHER00_TYPE (base + 0x30c))
#define ETHER_BLFRMPTR(base) (ETHER00_TYPE (base + 0x110))
#define ETHER_BLFFRMPTR_EOL_OFST (0)
#define ETHER_BLFFRMPTR_EOL_MSK (0x1)
#define ETHER_BLFFRMPTR_ADDRESS_OFST (4)
#define ETHER_BLFFRMPTR_ADDRESS_MSK (0xFFFFFFF0)
#define ETHER_RXFRAGSIZE(base) (ETHER00_TYPE (base + 0x114))
#define ETHER_RXFRAGSIZE_MINFRAG_OFST (2)
#define ETHER_RXFRAGSIZE_MINFRAG_MSK (0xFFC)
#define ETHER_RXFRAGSIZE_ENPACK_OFST (15)
#define ETHER_RXFRAGSIZE_ENPACK_MSK (0x8000)
#define ETHER_INT_EN(base) (ETHER00_TYPE (base + 0x118))
#define ETHER_INT_EN_FDAEXEN_OFST (0)
#define ETHER_INT_EN_FDAEXEN_MSK (0x1)
#define ETHER_INT_EN_BLEXEN_OFST (1)
#define ETHER_INT_EN_BLEXN_MSK (0x2)
#define ETHER_INT_EN_STARGABTEN_OFST (2)
#define ETHER_INT_EN_STARGABTEN_MSK (0x4)
#define ETHER_INT_EN_RTARGABTEN_OFST (3)
#define ETHER_INT_EN_RTARGABTEN_MSK (0x8)
#define ETHER_INT_EN_RMASABTEN_OFST (4)
#define ETHER_INT_EN_RMASABTEN_MSK (0x10)
#define ETHER_INT_EN_SSYSERREN_OFST (5)
#define ETHER_INT_EN_SSYSERREN_MSK (0x20)
#define ETHER_INT_EN_DPARERREN_OFST (6)
#define ETHER_INT_EN_DPARERREN_MSK (0x40)
#define ETHER_INT_EN_EARNOTEN_OFST (7)
#define ETHER_INT_EN_EARNOTEN_MSK (0x80)
#define ETHER_INT_EN_DPARDEN_OFST (8)
#define ETHER_INT_EN_DPARDEN_MSK (0x100)
#define ETHER_INT_EN_DMPARERREN_OFST (9)
#define ETHER_INT_EN_DMPARERREN_MSK (0x200)
#define ETHER_INT_EN_TXCTLCMPEN_OFST (10)
#define ETHER_INT_EN_TXCTLCMPEN_MSK (0x400)
#define ETHER_INT_EN_NRABTEN_OFST (11)
#define ETHER_INT_EN_NRABTEN_MSK (0x800)
#define ETHER_FDA_BAS(base) (ETHER00_TYPE (base + 0x11C))
#define ETHER_FDA_BAS_ADDRESS_OFST (4)
#define ETHER_FDA_BAS_ADDRESS_MSK (0xFFFFFFF0)
#define ETHER_FDA_LIM(base) (ETHER00_TYPE (base + 0x120))
#define ETHER_FDA_LIM_COUNT_OFST (4)
#define ETHER_FDA_LIM_COUNT_MSK (0xFFF0)
#define ETHER_INT_SRC(base) (ETHER00_TYPE (base + 0x124))
#define ETHER_INT_SRC_INTMACTX_OFST (0)
#define ETHER_INT_SRC_INTMACTX_MSK (0x1)
#define ETHER_INT_SRC_INTMACRX_OFST (1)
#define ETHER_INT_SRC_INTMACRX_MSK (0x2)
#define ETHER_INT_SRC_INTSBUS_OFST (2)
#define ETHER_INT_SRC_INTSBUS_MSK (0x4)
#define ETHER_INT_SRC_INTFDAEX_OFST (3)
#define ETHER_INT_SRC_INTFDAEX_MSK (0x8)
#define ETHER_INT_SRC_INTBLEX_OFST (4)
#define ETHER_INT_SRC_INTBLEX_MSK (0x10)
#define ETHER_INT_SRC_SWINT_OFST (5)
#define ETHER_INT_SRC_SWINT_MSK (0x20)
#define ETHER_INT_SRC_INTEARNOT_OFST (6)
#define ETHER_INT_SRC_INTEARNOT_MSK (0x40)
#define ETHER_INT_SRC_DMPARERR_OFST (7)
#define ETHER_INT_SRC_DMPARERR_MSK (0x80)
#define ETHER_INT_SRC_INTEXBD_OFST (8)
#define ETHER_INT_SRC_INTEXBD_MSK (0x100)
#define ETHER_INT_SRC_INTTXCTLCMP_OFST (9)
#define ETHER_INT_SRC_INTTXCTLCMP_MSK (0x200)
#define ETHER_INT_SRC_INTNRABT_OFST (10)
#define ETHER_INT_SRC_INTNRABT_MSK (0x400)
#define ETHER_INT_SRC_FDAEX_OFST (11)
#define ETHER_INT_SRC_FDAEX_MSK (0x800)
#define ETHER_INT_SRC_BLEX_OFST (12)
#define ETHER_INT_SRC_BLEX_MSK (0x1000)
#define ETHER_INT_SRC_DMPARERRSTAT_OFST (13)
#define ETHER_INT_SRC_DMPARERRSTAT_MSK (0x2000)
#define ETHER_INT_SRC_NRABT_OFST (14)
#define ETHER_INT_SRC_NRABT_MSK (0x4000)
#define ETHER_INT_SRC_INTLINK_OFST (15)
#define ETHER_INT_SRC_INTLINK_MSK (0x8000)
#define ETHER_INT_SRC_INTEXDEFER_OFST (16)
#define ETHER_INT_SRC_INTEXDEFER_MSK (0x10000)
#define ETHER_INT_SRC_INTRMON_OFST (17)
#define ETHER_INT_SRC_INTRMON_MSK (0x20000)
#define ETHER_INT_SRC_IRQ_MSK (0x83FF)
#define ETHER_PAUSECNT(base) (ETHER00_TYPE (base + 0x40))
#define ETHER_PAUSECNT_COUNT_OFST (0)
#define ETHER_PAUSECNT_COUNT_MSK (0xFFFF)
#define ETHER_REMPAUCNT(base) (ETHER00_TYPE (base + 0x44))
#define ETHER_REMPAUCNT_COUNT_OFST (0)
#define ETHER_REMPAUCNT_COUNT_MSK (0xFFFF)
#define ETHER_TXCONFRMSTAT(base) (ETHER00_TYPE (base + 0x348))
#define ETHER_TXCONFRMSTAT_TS_STAT_VALUE_OFST (0)
#define ETHER_TXCONFRMSTAT_TS_STAT_VALUE_MSK (0x3FFFFF)
#define ETHER_MAC_CTL(base) (ETHER00_TYPE (base + 0))
#define ETHER_MAC_CTL_HALTREQ_OFST (0)
#define ETHER_MAC_CTL_HALTREQ_MSK (0x1)
#define ETHER_MAC_CTL_HALTIMM_OFST (1)
#define ETHER_MAC_CTL_HALTIMM_MSK (0x2)
#define ETHER_MAC_CTL_RESET_OFST (2)
#define ETHER_MAC_CTL_RESET_MSK (0x4)
#define ETHER_MAC_CTL_FULLDUP_OFST (3)
#define ETHER_MAC_CTL_FULLDUP_MSK (0x8)
#define ETHER_MAC_CTL_MACLOOP_OFST (4)
#define ETHER_MAC_CTL_MACLOOP_MSK (0x10)
#define ETHER_MAC_CTL_CONN_OFST (5)
#define ETHER_MAC_CTL_CONN_MSK (0x60)
#define ETHER_MAC_CTL_LOOP10_OFST (7)
#define ETHER_MAC_CTL_LOOP10_MSK (0x80)
#define ETHER_MAC_CTL_LNKCHG_OFST (8)
#define ETHER_MAC_CTL_LNKCHG_MSK (0x100)
#define ETHER_MAC_CTL_MISSROLL_OFST (10)
#define ETHER_MAC_CTL_MISSROLL_MSK (0x400)
#define ETHER_MAC_CTL_ENMISSROLL_OFST (13)
#define ETHER_MAC_CTL_ENMISSROLL_MSK (0x2000)
#define ETHER_MAC_CTL_LINK10_OFST (15)
#define ETHER_MAC_CTL_LINK10_MSK (0x8000)
#define ETHER_ARC_CTL(base) (ETHER00_TYPE (base + 0x4))
#define ETHER_ARC_CTL_STATIONACC_OFST (0)
#define ETHER_ARC_CTL_STATIONACC_MSK (0x1)
#define ETHER_ARC_CTL_GROUPACC_OFST (1)
#define ETHER_ARC_CTL_GROUPACC_MSK (0x2)
#define ETHER_ARC_CTL_BROADACC_OFST (2)
#define ETHER_ARC_CTL_BROADACC_MSK (0x4)
#define ETHER_ARC_CTL_NEGARC_OFST (3)
#define ETHER_ARC_CTL_NEGARC_MSK (0x8)
#define ETHER_ARC_CTL_COMPEN_OFST (4)
#define ETHER_ARC_CTL_COMPEN_MSK (0x10)
#define ETHER_TX_CTL(base) (ETHER00_TYPE (base + 0x8))
#define ETHER_TX_CTL_TXEN_OFST (0)
#define ETHER_TX_CTL_TXEN_MSK (0x1)
#define ETHER_TX_CTL_TXHALT_OFST (1)
#define ETHER_TX_CTL_TXHALT_MSK (0x2)
#define ETHER_TX_CTL_NOPAD_OFST (2)
#define ETHER_TX_CTL_NOPAD_MSK (0x4)
#define ETHER_TX_CTL_NOCRC_OFST (3)
#define ETHER_TX_CTL_NOCRC_MSK (0x8)
#define ETHER_TX_CTL_FBACK_OFST (4)
#define ETHER_TX_CTL_FBACK_MSK (0x10)
#define ETHER_TX_CTL_NOEXDEF_OFST (5)
#define ETHER_TX_CTL_NOEXDEF_MSK (0x20)
#define ETHER_TX_CTL_SDPAUSE_OFST (6)
#define ETHER_TX_CTL_SDPAUSE_MSK (0x40)
#define ETHER_TX_CTL_MII10_OFST (7)
#define ETHER_TX_CTL_MII10_MSK (0x80)
#define ETHER_TX_CTL_ENUNDER_OFST (8)
#define ETHER_TX_CTL_ENUNDER_MSK (0x100)
#define ETHER_TX_CTL_ENEXDEFER_OFST (9)
#define ETHER_TX_CTL_ENEXDEFER_MSK (0x200)
#define ETHER_TX_CTL_ENLCARR_OFST (10)
#define ETHER_TX_CTL_ENLCARR_MSK (0x400)
#define ETHER_TX_CTL_ENEXCOLL_OFST (11)
#define ETHER_TX_CTL_ENEXCOLL_MSK (0x800)
#define ETHER_TX_CTL_ENLATECOLL_OFST (12)
#define ETHER_TX_CTL_ENLATECOLL_MSK (0x1000)
#define ETHER_TX_CTL_ENTXPAR_OFST (13)
#define ETHER_TX_CTL_ENTXPAR_MSK (0x2000)
#define ETHER_TX_CTL_ENCOMP_OFST (14)
#define ETHER_TX_CTL_ENCOMP_MSK (0x4000)
#define ETHER_TX_STAT(base) (ETHER00_TYPE (base + 0xc))
#define ETHER_TX_STAT_TXCOLL_OFST (0)
#define ETHER_TX_STAT_TXCOLL_MSK (0xF)
#define ETHER_TX_STAT_EXCOLL_OFST (4)
#define ETHER_TX_STAT_EXCOLL_MSK (0x10)
#define ETHER_TX_STAT_TXDEFER_OFST (5)
#define ETHER_TX_STAT_TXDEFER_MSK (0x20)
#define ETHER_TX_STAT_PAUSED_OFST (6)
#define ETHER_TX_STAT_PAUSED_MSK (0x40)
#define ETHER_TX_STAT_INTTX_OFST (7)
#define ETHER_TX_STAT_INTTX_MSK (0x80)
#define ETHER_TX_STAT_UNDER_OFST (8)
#define ETHER_TX_STAT_UNDER_MSK (0x100)
#define ETHER_TX_STAT_EXDEFER_OFST (9)
#define ETHER_TX_STAT_EXDEFER_MSK (0x200)
#define ETHER_TX_STAT_LCARR_OFST (10)
#define ETHER_TX_STAT_LCARR_MSK (0x400)
#define ETHER_TX_STAT_TX10STAT_OFST (11)
#define ETHER_TX_STAT_TX10STAT_MSK (0x800)
#define ETHER_TX_STAT_LATECOLL_OFST (12)
#define ETHER_TX_STAT_LATECOLL_MSK (0x1000)
#define ETHER_TX_STAT_TXPAR_OFST (13)
#define ETHER_TX_STAT_TXPAR_MSK (0x2000)
#define ETHER_TX_STAT_COMP_OFST (14)
#define ETHER_TX_STAT_COMP_MSK (0x4000)
#define ETHER_TX_STAT_TXHALTED_OFST (15)
#define ETHER_TX_STAT_TXHALTED_MSK (0x8000)
#define ETHER_TX_STAT_SQERR_OFST (16)
#define ETHER_TX_STAT_SQERR_MSK (0x10000)
#define ETHER_TX_STAT_TXMCAST_OFST (17)
#define ETHER_TX_STAT_TXMCAST_MSK (0x20000)
#define ETHER_TX_STAT_TXBCAST_OFST (18)
#define ETHER_TX_STAT_TXBCAST_MSK (0x40000)
#define ETHER_TX_STAT_VLAN_OFST (19)
#define ETHER_TX_STAT_VLAN_MSK (0x80000)
#define ETHER_TX_STAT_MACC_OFST (20)
#define ETHER_TX_STAT_MACC_MSK (0x100000)
#define ETHER_TX_STAT_TXPAUSE_OFST (21)
#define ETHER_TX_STAT_TXPAUSE_MSK (0x200000)
#define ETHER_RX_CTL(base) (ETHER00_TYPE (base + 0x10))
#define ETHER_RX_CTL_RXEN_OFST (0)
#define ETHER_RX_CTL_RXEN_MSK (0x1)
#define ETHER_RX_CTL_RXHALT_OFST (1)
#define ETHER_RX_CTL_RXHALT_MSK (0x2)
#define ETHER_RX_CTL_LONGEN_OFST (2)
#define ETHER_RX_CTL_LONGEN_MSK (0x4)
#define ETHER_RX_CTL_SHORTEN_OFST (3)
#define ETHER_RX_CTL_SHORTEN_MSK (0x8)
#define ETHER_RX_CTL_STRIPCRC_OFST (4)
#define ETHER_RX_CTL_STRIPCRC_MSK (0x10)
#define ETHER_RX_CTL_PASSCTL_OFST (5)
#define ETHER_RX_CTL_PASSCTL_MSK (0x20)
#define ETHER_RX_CTL_IGNORECRC_OFST (6)
#define ETHER_RX_CTL_IGNORECRC_MSK (0x40)
#define ETHER_RX_CTL_ENALIGN_OFST (8)
#define ETHER_RX_CTL_ENALIGN_MSK (0x100)
#define ETHER_RX_CTL_ENCRCERR_OFST (9)
#define ETHER_RX_CTL_ENCRCERR_MSK (0x200)
#define ETHER_RX_CTL_ENOVER_OFST (10)
#define ETHER_RX_CTL_ENOVER_MSK (0x400)
#define ETHER_RX_CTL_ENLONGERR_OFST (11)
#define ETHER_RX_CTL_ENLONGERR_MSK (0x800)
#define ETHER_RX_CTL_ENRXPAR_OFST (13)
#define ETHER_RX_CTL_ENRXPAR_MSK (0x2000)
#define ETHER_RX_CTL_ENGOOD_OFST (14)
#define ETHER_RX_CTL_ENGOOD_MSK (0x4000)
#define ETHER_RX_STAT(base) (ETHER00_TYPE (base + 0x14))
#define ETHER_RX_STAT_LENERR_OFST (4)
#define ETHER_RX_STAT_LENERR_MSK (0x10)
#define ETHER_RX_STAT_CTLRECD_OFST (5)
#define ETHER_RX_STAT_CTLRECD_MSK (0x20)
#define ETHER_RX_STAT_INTRX_OFST (6)
#define ETHER_RX_STAT_INTRX_MSK (0x40)
#define ETHER_RX_STAT_RX10STAT_OFST (7)
#define ETHER_RX_STAT_RX10STAT_MSK (0x80)
#define ETHER_RX_STAT_ALIGNERR_OFST (8)
#define ETHER_RX_STAT_ALIGNERR_MSK (0x100)
#define ETHER_RX_STAT_CRCERR_OFST (9)
#define ETHER_RX_STAT_CRCERR_MSK (0x200)
#define ETHER_RX_STAT_OVERFLOW_OFST (10)
#define ETHER_RX_STAT_OVERFLOW_MSK (0x400)
#define ETHER_RX_STAT_LONGERR_OFST (11)
#define ETHER_RX_STAT_LONGERR_MSK (0x800)
#define ETHER_RX_STAT_RXPAR_OFST (13)
#define ETHER_RX_STAT_RXPAR_MSK (0x2000)
#define ETHER_RX_STAT_GOOD_OFST (14)
#define ETHER_RX_STAT_GOOD_MSK (0x4000)
#define ETHER_RX_STAT_RXHALTED_OFST (15)
#define ETHER_RX_STAT_RXHALTED_MSK (0x8000)
#define ETHER_RX_STAT_RXMCAST_OFST (17)
#define ETHER_RX_STAT_RXMCAST_MSK (0x10000)
#define ETHER_RX_STAT_RXBCAST_OFST (18)
#define ETHER_RX_STAT_RXBCAST_MSK (0x20000)
#define ETHER_RX_STAT_RXVLAN_OFST (19)
#define ETHER_RX_STAT_RXVLAN_MSK (0x40000)
#define ETHER_RX_STAT_RXPAUSE_OFST (20)
#define ETHER_RX_STAT_RXPAUSE_MSK (0x80000)
#define ETHER_RX_STAT_ARCSTATUS_OFST (21)
#define ETHER_RX_STAT_ARCSTATUS_MSK (0xF00000)
#define ETHER_RX_STAT_ARCENT_OFST (25)
#define ETHER_RX_STAT_ARCENT_MSK (0x1F000000)
#define ETHER_MD_DATA(base) (ETHER00_TYPE (base + 0x18))
#define ETHER_MD_CA(base) (ETHER00_TYPE (base + 0x1c))
#define ETHER_MD_CA_ADDR_OFST (0)
#define ETHER_MD_CA_ADDR_MSK (0x1F)
#define ETHER_MD_CA_PHY_OFST (5)
#define ETHER_MD_CA_PHY_MSK (0x3E0)
#define ETHER_MD_CA_WR_OFST (10)
#define ETHER_MD_CA_WR_MSK (0x400)
#define ETHER_MD_CA_BUSY_OFST (11)
#define ETHER_MD_CA_BUSY_MSK (0x800)
#define ETHER_MD_CA_PRESUPP_OFST (12)
#define ETHER_MD_CA_PRESUPP_MSK (0x1000)
#define ETHER_ARC_ADR(base) (ETHER00_TYPE (base + 0x160))
#define ETHER_ARC_ADR_ARC_LOC_OFST (2)
#define ETHER_ARC_ADR_ARC_LOC_MSK (0xFFC)
#define ETHER_ARC_DATA(base) (ETHER00_TYPE (base + 0x364))
#define ETHER_ARC_ENA(base) (ETHER00_TYPE (base + 0x28))
#define ETHER_ARC_ENA_MSK (0x1FFFFF)
#define ETHER_PROM_CTL(base) (ETHER00_TYPE (base + 0x2c))
#define ETHER_PROM_CTL_PROM_ADDR_OFST (0)
#define ETHER_PROM_CTL_PROM_ADDR_MSK (0x3F)
#define ETHER_PROM_CTL_OPCODE_OFST (13)
#define ETHER_PROM_CTL_OPCODE_MSK (0x6000)
#define ETHER_PROM_CTL_OPCODE_READ_MSK (0x4000)
#define ETHER_PROM_CTL_OPCODE_WRITE_MSK (0x2000)
#define ETHER_PROM_CTL_OPCODE_ERASE_MSK (0x6000)
#define ETHER_PROM_CTL_ENABLE_MSK (0x0030)
#define ETHER_PROM_CTL_DISABLE_MSK (0x0000)
#define ETHER_PROM_CTL_BUSY_OFST (15)
#define ETHER_PROM_CTL_BUSY_MSK (0x8000)
#define ETHER_PROM_DATA(base) (ETHER00_TYPE (base + 0x30))
#define ETHER_MISS_CNT(base) (ETHER00_TYPE (base + 0x3c))
#define ETHER_MISS_CNT_COUNT_OFST (0)
#define ETHER_MISS_CNT_COUNT_MSK (0xFFFF)
#define ETHER_CNTDATA(base) (ETHER00_TYPE (base + 0x80))
#define ETHER_CNTACC(base) (ETHER00_TYPE (base + 0x84))
#define ETHER_CNTACC_ADDR_OFST (0)
#define ETHER_CNTACC_ADDR_MSK (0xFF)
#define ETHER_CNTACC_WRRDN_OFST (8)
#define ETHER_CNTACC_WRRDN_MSK (0x100)
#define ETHER_CNTACC_CLEAR_OFST (9)
#define ETHER_CNTACC_CLEAR_MSK (0x200)
#define ETHER_TXRMINTEN(base) (ETHER00_TYPE (base + 0x88))
#define ETHER_TXRMINTEN_MSK (0x3FFFFFFF)
#define ETHER_RXRMINTEN(base) (ETHER00_TYPE (base + 0x8C))
#define ETHER_RXRMINTEN_MSK (0xFFFFFF)
/*
* RMON Registers
*/
#define RMON_COLLISION0 0x0
#define RMON_COLLISION1 0x1
#define RMON_COLLISION2 0x2
#define RMON_COLLISION3 0x3
#define RMON_COLLISION4 0x4
#define RMON_COLLISION5 0x5
#define RMON_COLLISION6 0x6
#define RMON_COLLISION7 0x7
#define RMON_COLLISION8 0x8
#define RMON_COLLISION9 0x9
#define RMON_COLLISION10 0xa
#define RMON_COLLISION11 0xb
#define RMON_COLLISION12 0xc
#define RMON_COLLISION13 0xd
#define RMON_COLLISION14 0xe
#define RMON_COLLISION15 0xf
#define RMON_COLLISION16 0x10
#define RMON_FRAMES_WITH_DEFERRED_XMISSIONS 0x11
#define RMON_LATE_COLLISIONS 0x12
#define RMON_FRAMES_LOST_DUE_TO_MAC_XMIT 0x13
#define RMON_CARRIER_SENSE_ERRORS 0x14
#define RMON_FRAMES_WITH_EXCESSIVE_DEFERAL 0x15
#define RMON_UNICAST_FRAMES_TRANSMITTED_OK 0x16
#define RMON_MULTICAST_FRAMES_XMITTED_OK 0x17
#define RMON_BROADCAST_FRAMES_XMITTED_OK 0x18
#define RMON_SQE_TEST_ERRORS 0x19
#define RMON_PAUSE_MACCTRL_FRAMES_XMITTED 0x1A
#define RMON_MACCTRL_FRAMES_XMITTED 0x1B
#define RMON_VLAN_FRAMES_XMITTED 0x1C
#define RMON_OCTETS_XMITTED_OK 0x1D
#define RMON_OCTETS_XMITTED_OK_HI 0x1E
#define RMON_RX_PACKET_SIZES0 0x40
#define RMON_RX_PACKET_SIZES1 0x41
#define RMON_RX_PACKET_SIZES2 0x42
#define RMON_RX_PACKET_SIZES3 0x43
#define RMON_RX_PACKET_SIZES4 0x44
#define RMON_RX_PACKET_SIZES5 0x45
#define RMON_RX_PACKET_SIZES6 0x46
#define RMON_RX_PACKET_SIZES7 0x47
#define RMON_FRAME_CHECK_SEQUENCE_ERRORS 0x48
#define RMON_ALIGNMENT_ERRORS 0x49
#define RMON_FRAGMENTS 0x4A
#define RMON_JABBERS 0x4B
#define RMON_FRAMES_LOST_TO_INTMACRCVERR 0x4C
#define RMON_UNICAST_FRAMES_RCVD_OK 0x4D
#define RMON_MULTICAST_FRAMES_RCVD_OK 0x4E
#define RMON_BROADCAST_FRAMES_RCVD_OK 0x4F
#define RMON_IN_RANGE_LENGTH_ERRORS 0x50
#define RMON_OUT_OF_RANGE_LENGTH_ERRORS 0x51
#define RMON_VLAN_FRAMES_RCVD 0x52
#define RMON_PAUSE_MAC_CTRL_FRAMES_RCVD 0x53
#define RMON_MAC_CTRL_FRAMES_RCVD 0x54
#define RMON_OCTETS_RCVD_OK 0x55
#define RMON_OCTETS_RCVD_OK_HI 0x56
#define RMON_OCTETS_RCVD_OTHER 0x57
#define RMON_OCTETS_RCVD_OTHER_HI 0x58
#endif /* __ETHER00_H */
include/asm-arm/arch-epxa10db/excalibur.h 已删除 100644 → 0
浏览文件 @ b9abaa3f
/* megafunction wizard: %ARM-Based Excalibur%
GENERATION: STANDARD
VERSION: WM1.0
MODULE: ARM-Based Excalibur
PROJECT: excalibur
============================================================
File Name: v:\embedded\linux\bootldr\excalibur.h
Megafunction Name(s): ARM-Based Excalibur
============================================================
************************************************************
THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE!
************************************************************/
#ifndef EXCALIBUR_H_INCLUDED
#define EXCALIBUR_H_INCLUDED
#define EXC_DEFINE_PROCESSOR_LITTLE_ENDIAN
#define EXC_DEFINE_BOOT_FROM_FLASH
#define EXC_INPUT_CLK_FREQUENCY (50000000)
#define EXC_AHB1_CLK_FREQUENCY (150000000)
#define EXC_AHB2_CLK_FREQUENCY (75000000)
#define EXC_SDRAM_CLK_FREQUENCY (75000000)
/* Registers Block */
#define EXC_REGISTERS_BASE (0x7fffc000)
#define EXC_MODE_CTRL00_BASE (EXC_REGISTERS_BASE + 0x000)
#define EXC_IO_CTRL00_BASE (EXC_REGISTERS_BASE + 0x040)
#define EXC_MMAP00_BASE (EXC_REGISTERS_BASE + 0x080)
#define EXC_PLD_CONFIG00_BASE (EXC_REGISTERS_BASE + 0x140)
#define EXC_TIMER00_BASE (EXC_REGISTERS_BASE + 0x200)
#define EXC_INT_CTRL00_BASE (EXC_REGISTERS_BASE + 0xc00)
#define EXC_CLOCK_CTRL00_BASE (EXC_REGISTERS_BASE + 0x300)
#define EXC_WATCHDOG00_BASE (EXC_REGISTERS_BASE + 0xa00)
#define EXC_UART00_BASE (EXC_REGISTERS_BASE + 0x280)
#define EXC_EBI00_BASE (EXC_REGISTERS_BASE + 0x380)
#define EXC_SDRAM00_BASE (EXC_REGISTERS_BASE + 0x400)
#define EXC_AHB12_BRIDGE_CTRL00_BASE (EXC_REGISTERS_BASE + 0x800)
#define EXC_PLD_STRIPE_BRIDGE_CTRL00_BASE (EXC_REGISTERS_BASE + 0x100)
#define EXC_STRIPE_PLD_BRIDGE_CTRL00_BASE (EXC_REGISTERS_BASE + 0x100)
#define EXC_REGISTERS_SIZE (0x00004000)
/* EBI Block(s) */
#define EXC_EBI_BLOCK0_BASE (0x40000000)
#define EXC_EBI_BLOCK0_SIZE (0x00400000)
#define EXC_EBI_BLOCK0_WIDTH (8)
#define EXC_EBI_BLOCK0_NON_CACHEABLE
#define EXC_EBI_BLOCK1_BASE (0x40400000)
#define EXC_EBI_BLOCK1_SIZE (0x00400000)
#define EXC_EBI_BLOCK1_WIDTH (16)
#define EXC_EBI_BLOCK1_NON_CACHEABLE
#define EXC_EBI_BLOCK2_BASE (0x40800000)
#define EXC_EBI_BLOCK2_SIZE (0x00400000)
#define EXC_EBI_BLOCK2_WIDTH (16)
#define EXC_EBI_BLOCK2_NON_CACHEABLE
#define EXC_EBI_BLOCK3_BASE (0x40c00000)
#define EXC_EBI_BLOCK3_SIZE (0x00400000)
#define EXC_EBI_BLOCK3_WIDTH (16)
#define EXC_EBI_BLOCK3_NON_CACHEABLE
/* SDRAM Block(s) */
#define EXC_SDRAM_BLOCK0_BASE (0x00000000)
#define EXC_SDRAM_BLOCK0_SIZE (0x04000000)
#define EXC_SDRAM_BLOCK0_WIDTH (32)
#define EXC_SDRAM_BLOCK1_BASE (0x04000000)
#define EXC_SDRAM_BLOCK1_SIZE (0x04000000)
#define EXC_SDRAM_BLOCK1_WIDTH (32)
/* Single Port SRAM Block(s) */
#define EXC_SPSRAM_BLOCK0_BASE (0x08000000)
#define EXC_SPSRAM_BLOCK0_SIZE (0x00020000)
#define EXC_SPSRAM_BLOCK1_BASE (0x08020000)
#define EXC_SPSRAM_BLOCK1_SIZE (0x00020000)
/* PLD Block(s) */
#define EXC_PLD_BLOCK0_BASE (0x80000000)
#define EXC_PLD_BLOCK0_SIZE (0x00004000)
#define EXC_PLD_BLOCK0_NON_CACHEABLE
#define EXC_PLD_BLOCK1_BASE (0xf000000)
#define EXC_PLD_BLOCK1_SIZE (0x00004000)
#define EXC_PLD_BLOCK1_NON_CACHEABLE
#define EXC_PLD_BLOCK2_BASE (0x80008000)
#define EXC_PLD_BLOCK2_SIZE (0x00004000)
#define EXC_PLD_BLOCK2_NON_CACHEABLE
#define EXC_PLD_BLOCK3_BASE (0x8000c000)
#define EXC_PLD_BLOCK3_SIZE (0x00004000)
#define EXC_PLD_BLOCK3_NON_CACHEABLE
#endif
include/asm-arm/arch-epxa10db/hardware.h 已删除 100644 → 0
浏览文件 @ b9abaa3f
/*
* linux/include/asm-arm/arch-epxa10/hardware.h
*
* This file contains the hardware definitions of the Integrator.
*
* Copyright (C) 1999 ARM Limited.
* Copyright (C) 2001 Altera Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
#include <asm/arch/platform.h>
/*
* Where in virtual memory the IO devices (timers, system controllers
* and so on)
*/
#define IO_BASE 0xf0000000 // VA of IO
#define IO_SIZE 0x10000000 // How much?
#define IO_START EXC_REGISTERS_BASE // PA of IO
/* macro to get at IO space when running virtually */
#define IO_ADDRESS(x) ((x) | 0xf0000000)
#define FLASH_VBASE 0xFE000000
#define FLASH_SIZE 0x01000000
#define FLASH_START EXC_EBI_BLOCK0_BASE
#define FLASH_VADDR(x) ((x)|0xFE000000)
/*
* Similar to above, but for PCI addresses (memory, IO, Config and the
* V3 chip itself). WARNING: this has to mirror definitions in platform.h
*/
#if 0
#define PCI_MEMORY_VADDR 0xe8000000
#define PCI_CONFIG_VADDR 0xec000000
#define PCI_V3_VADDR 0xed000000
#define PCI_IO_VADDR 0xee000000
#define PCIO_BASE PCI_IO_VADDR
#define PCIMEM_BASE PCI_MEMORY_VADDR
#define pcibios_assign_all_busses() 1
#define PCIBIOS_MIN_IO 0x6000
#define PCIBIOS_MIN_MEM 0x00100000
#endif
#endif
include/asm-arm/arch-epxa10db/int_ctrl00.h 已删除 100644 → 0
浏览文件 @ b9abaa3f
/*
*
* This file contains the register definitions for the Excalibur
* Timer TIMER00.
*
* Copyright (C) 2001 Altera Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __INT_CTRL00_H
#define __INT_CTRL00_H
#define INT_MS(base_addr) (INT_CTRL00_TYPE (base_addr + 0x00 ))
#define INT_MS_FC_MSK (0x10000)
#define INT_MS_FC_OFST (16)
#define INT_MS_M1_MSK (0x8000)
#define INT_MS_M1_OFST (15)
#define INT_MS_M0_MSK (0x4000)
#define INT_MS_M0_OFST (14)
#define INT_MS_AE_MSK (0x2000)
#define INT_MS_AE_OFST (13)
#define INT_MS_PE_MSK (0x1000)
#define INT_MS_PE_OFST (12)
#define INT_MS_EE_MSK (0x0800)
#define INT_MS_EE_OFST (11)
#define INT_MS_PS_MSK (0x0400)
#define INT_MS_PS_OFST (10)
#define INT_MS_T1_MSK (0x0200)
#define INT_MS_T1_OFST (9)
#define INT_MS_T0_MSK (0x0100)
#define INT_MS_T0_OFST (8)
#define INT_MS_UA_MSK (0x0080)
#define INT_MS_UA_OFST (7)
#define INT_MS_IP_MSK (0x0040)
#define INT_MS_IP_OFST (6)
#define INT_MS_P5_MSK (0x0020)
#define INT_MS_P5_OFST (5)
#define INT_MS_P4_MSK (0x0010)
#define INT_MS_P4_OFST (4)
#define INT_MS_P3_MSK (0x0008)
#define INT_MS_P3_OFST (3)
#define INT_MS_P2_MSK (0x0004)
#define INT_MS_P2_OFST (2)
#define INT_MS_P1_MSK (0x0002)
#define INT_MS_P1_OFST (1)
#define INT_MS_P0_MSK (0x0001)
#define INT_MS_P0_OFST (0)
#define INT_MC(base_addr) (INT_CTRL00_TYPE (base_addr + 0x04 ))
#define INT_MC_FC_MSK (0x10000)
#define INT_MC_FC_OFST (16)
#define INT_MC_M1_MSK (0x8000)
#define INT_MC_M1_OFST (15)
#define INT_MC_M0_MSK (0x4000)
#define INT_MC_M0_OFST (14)
#define INT_MC_AE_MSK (0x2000)
#define INT_MC_AE_OFST (13)
#define INT_MC_PE_MSK (0x1000)
#define INT_MC_PE_OFST (12)
#define INT_MC_EE_MSK (0x0800)
#define INT_MC_EE_OFST (11)
#define INT_MC_PS_MSK (0x0400)
#define INT_MC_PS_OFST (10)
#define INT_MC_T1_MSK (0x0200)
#define INT_MC_T1_OFST (9)
#define INT_MC_T0_MSK (0x0100)
#define INT_MC_T0_OFST (8)
#define INT_MC_UA_MSK (0x0080)
#define INT_MC_UA_OFST (7)
#define INT_MC_IP_MSK (0x0040)
#define INT_MC_IP_OFST (6)
#define INT_MC_P5_MSK (0x0020)
#define INT_MC_P5_OFST (5)
#define INT_MC_P4_MSK (0x0010)
#define INT_MC_P4_OFST (4)
#define INT_MC_P3_MSK (0x0008)
#define INT_MC_P3_OFST (3)
#define INT_MC_P2_MSK (0x0004)
#define INT_MC_P2_OFST (2)
#define INT_MC_P1_MSK (0x0002)
#define INT_MC_P1_OFST (1)
#define INT_MC_P0_MSK (0x0001)
#define INT_MC_P0_OFST (0)
#define INT_SS(base_addr) (INT_CTRL00_TYPE (base_addr + 0x08 ))
#define INT_SS_FC_SSK (0x8000)
#define INT_SS_FC_OFST (15)
#define INT_SS_M1_SSK (0x8000)
#define INT_SS_M1_OFST (15)
#define INT_SS_M0_SSK (0x4000)
#define INT_SS_M0_OFST (14)
#define INT_SS_AE_SSK (0x2000)
#define INT_SS_AE_OFST (13)
#define INT_SS_PE_SSK (0x1000)
#define INT_SS_PE_OFST (12)
#define INT_SS_EE_SSK (0x0800)
#define INT_SS_EE_OFST (11)
#define INT_SS_PS_SSK (0x0400)
#define INT_SS_PS_OFST (10)
#define INT_SS_T1_SSK (0x0200)
#define INT_SS_T1_OFST (9)
#define INT_SS_T0_SSK (0x0100)
#define INT_SS_T0_OFST (8)
#define INT_SS_UA_SSK (0x0080)
#define INT_SS_UA_OFST (7)
#define INT_SS_IP_SSK (0x0040)
#define INT_SS_IP_OFST (6)
#define INT_SS_P5_SSK (0x0020)
#define INT_SS_P5_OFST (5)
#define INT_SS_P4_SSK (0x0010)
#define INT_SS_P4_OFST (4)
#define INT_SS_P3_SSK (0x0008)
#define INT_SS_P3_OFST (3)
#define INT_SS_P2_SSK (0x0004)
#define INT_SS_P2_OFST (2)
#define INT_SS_P1_SSK (0x0002)
#define INT_SS_P1_OFST (1)
#define INT_SS_P0_SSK (0x0001)
#define INT_SS_P0_OFST (0)
#define INT_RS(base_addr) (INT_CTRL00_TYPE (base_addr + 0x0C ))
#define INT_RS_FC_RSK (0x10000)
#define INT_RS_FC_OFST (16)
#define INT_RS_M1_RSK (0x8000)
#define INT_RS_M1_OFST (15)
#define INT_RS_M0_RSK (0x4000)
#define INT_RS_M0_OFST (14)
#define INT_RS_AE_RSK (0x2000)
#define INT_RS_AE_OFST (13)
#define INT_RS_PE_RSK (0x1000)
#define INT_RS_PE_OFST (12)
#define INT_RS_EE_RSK (0x0800)
#define INT_RS_EE_OFST (11)
#define INT_RS_PS_RSK (0x0400)
#define INT_RS_PS_OFST (10)
#define INT_RS_T1_RSK (0x0200)
#define INT_RS_T1_OFST (9)
#define INT_RS_T0_RSK (0x0100)
#define INT_RS_T0_OFST (8)
#define INT_RS_UA_RSK (0x0080)
#define INT_RS_UA_OFST (7)
#define INT_RS_IP_RSK (0x0040)
#define INT_RS_IP_OFST (6)
#define INT_RS_P5_RSK (0x0020)
#define INT_RS_P5_OFST (5)
#define INT_RS_P4_RSK (0x0010)
#define INT_RS_P4_OFST (4)
#define INT_RS_P3_RSK (0x0008)
#define INT_RS_P3_OFST (3)
#define INT_RS_P2_RSK (0x0004)
#define INT_RS_P2_OFST (2)
#define INT_RS_P1_RSK (0x0002)
#define INT_RS_P1_OFST (1)
#define INT_RS_P0_RSK (0x0001)
#define INT_RS_P0_OFST (0)
#define INT_ID(base_addr) (INT_CTRL00_TYPE (base_addr + 0x10 ))
#define INT_ID_ID_MSK (0x3F)
#define INT_ID_ID_OFST (0)
#define INT_PLD_PRIORITY(base_addr) (INT_CTRL00_TYPE (base_addr + 0x14 ))
#define INT_PLD_PRIORITY_PRI_MSK (0x3F)
#define INT_PLD_PRIORITY_PRI_OFST (0)
#define INT_PLD_PRIORITY_GA_MSK (0x40)
#define INT_PLD_PRIORITY_GA_OFST (6)
#define INT_MODE(base_addr) (INT_CTRL00_TYPE (base_addr + 0x18 ))
#define INT_MODE_MODE_MSK (0x3)
#define INT_MODE_MODE_OFST (0)
#define INT_PRIORITY_P0(base_addr) (INT_CTRL00_TYPE (base_addr + 0x80 ))
#define INT_PRIORITY_P0_PRI_MSK (0x3F)
#define INT_PRIORITY_P0_PRI_OFST (0)
#define INT_PRIORITY_P0_FQ_MSK (0x40)
#define INT_PRIORITY_P0_FQ_OFST (6)
#define INT_PRIORITY_P1(base_addr) (INT_CTRL00_TYPE (base_addr + 0x84 ))
#define INT_PRIORITY_P1_PRI_MSK (0x3F)
#define INT_PRIORITY_P1_PRI_OFST (0)
#define INT_PRIORITY_P1_FQ_MSK (0x40)
#define INT_PRIORITY_P1_FQ_OFST (6)
#define INT_PRIORITY_P2(base_addr) (INT_CTRL00_TYPE (base_addr + 0x88 ))
#define INT_PRIORITY_P2_PRI_MSK (0x3F)
#define INT_PRIORITY_P2_PRI_OFST (0)
#define INT_PRIORITY_P2_FQ_MSK (0x40)
#define INT_PRIORITY_P2_FQ_OFST (6)
#define INT_PRIORITY_P3(base_addr) (INT_CTRL00_TYPE (base_addr + 0x8C ))
#define INT_PRIORITY_P3_PRI_MSK (0x3F)
#define INT_PRIORITY_P3_PRI_OFST (0)
#define INT_PRIORITY_P3_FQ_MSK (0x40)
#define INT_PRIORITY_P3_FQ_OFST (6)
#define INT_PRIORITY_P4(base_addr) (INT_CTRL00_TYPE (base_addr + 0x90 ))
#define INT_PRIORITY_P4_PRI_MSK (0x3F)
#define INT_PRIORITY_P4_PRI_OFST (0)
#define INT_PRIORITY_P4_FQ_MSK (0x40)
#define INT_PRIORITY_P4_FQ_OFST (6)
#define INT_PRIORITY_P5(base_addr) (INT_CTRL00_TYPE (base_addr + 0x94 ))
#define INT_PRIORITY_P5_PRI_MSK (0x3F)
#define INT_PRIORITY_P5_PRI_OFST (0)
#define INT_PRIORITY_P5_FQ_MSK (0x40)
#define INT_PRIORITY_P5_FQ_OFST (6)
#define INT_PRIORITY_IP(base_addr) (INT_CTRL00_TYPE (base_addr + 0x94 ))
#define INT_PRIORITY_IP_PRI_MSK (0x3F)
#define INT_PRIORITY_IP_PRI_OFST (0)
#define INT_PRIORITY_IP_FQ_MSK (0x40)
#define INT_PRIORITY_IP_FQ_OFST (6)
#define INT_PRIORITY_UA(base_addr) (INT_CTRL00_TYPE (base_addr + 0x9C ))
#define INT_PRIORITY_UA_PRI_MSK (0x3F)
#define INT_PRIORITY_UA_PRI_OFST (0)
#define INT_PRIORITY_UA_FQ_MSK (0x40)
#define INT_PRIORITY_UA_FQ_OFST (6)
#define INT_PRIORITY_T0(base_addr) (INT_CTRL00_TYPE (base_addr + 0xA0 ))
#define INT_PRIORITY_T0_PRI_MSK (0x3F)
#define INT_PRIORITY_T0_PRI_OFST (0)
#define INT_PRIORITY_T0_FQ_MSK (0x40)
#define INT_PRIORITY_T0_FQ_OFST (6)
#define INT_PRIORITY_T1(base_addr) (INT_CTRL00_TYPE (base_addr + 0xA4 ))
#define INT_PRIORITY_T1_PRI_MSK (0x3F)
#define INT_PRIORITY_T1_PRI_OFST (0)
#define INT_PRIORITY_T1_FQ_MSK (0x40)
#define INT_PRIORITY_T1_FQ_OFST (6)
#define INT_PRIORITY_PS(base_addr) (INT_CTRL00_TYPE (base_addr + 0xA8 ))
#define INT_PRIORITY_PS_PRI_MSK (0x3F)
#define INT_PRIORITY_PS_PRI_OFST (0)
#define INT_PRIORITY_PS_FQ_MSK (0x40)
#define INT_PRIORITY_PS_FQ_OFST (6)
#define INT_PRIORITY_EE(base_addr) (INT_CTRL00_TYPE (base_addr + 0xAC ))
#define INT_PRIORITY_EE_PRI_MSK (0x3F)
#define INT_PRIORITY_EE_PRI_OFST (0)
#define INT_PRIORITY_EE_FQ_MSK (0x40)
#define INT_PRIORITY_EE_FQ_OFST (6)
#define INT_PRIORITY_PE(base_addr) (INT_CTRL00_TYPE (base_addr + 0xB0 ))
#define INT_PRIORITY_PE_PRI_MSK (0x3F)
#define INT_PRIORITY_PE_PRI_OFST (0)
#define INT_PRIORITY_PE_FQ_MSK (0x40)
#define INT_PRIORITY_PE_FQ_OFST (6)
#define INT_PRIORITY_AE(base_addr) (INT_CTRL00_TYPE (base_addr + 0xB4 ))
#define INT_PRIORITY_AE_PRI_MSK (0x3F)
#define INT_PRIORITY_AE_PRI_OFST (0)
#define INT_PRIORITY_AE_FQ_MSK (0x40)
#define INT_PRIORITY_AE_FQ_OFST (6)
#define INT_PRIORITY_M0(base_addr) (INT_CTRL00_TYPE (base_addr + 0xB8 ))
#define INT_PRIORITY_M0_PRI_MSK (0x3F)
#define INT_PRIORITY_M0_PRI_OFST (0)
#define INT_PRIORITY_M0_FQ_MSK (0x40)
#define INT_PRIORITY_M0_FQ_OFST (6)
#define INT_PRIORITY_M1(base_addr) (INT_CTRL00_TYPE (base_addr + 0xBC ))
#define INT_PRIORITY_M1_PRI_MSK (0x3F)
#define INT_PRIORITY_M1_PRI_OFST (0)
#define INT_PRIORITY_M1_FQ_MSK (0x40)
#define INT_PRIORITY_M1_FQ_OFST (6)
#define INT_PRIORITY_FC(base_addr) (INT_CTRL00_TYPE (base_addr + 0xC0 ))
#define INT_PRIORITY_FC_PRI_MSK (0x3F)
#define INT_PRIORITY_FC_PRI_OFST (0)
#define INT_PRIORITY_FC_FQ_MSK (0x40)
#define INT_PRIORITY_FC_FQ_OFST (6)
#endif /* __INT_CTRL00_H */
include/asm-arm/arch-epxa10db/io.h 已删除 100644 → 0
浏览文件 @ b9abaa3f
/*
* linux/include/asm-arm/arch-epxa10db/io.h
*
* Copyright (C) 1999 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
#include <asm/hardware.h>
#define IO_SPACE_LIMIT 0xffff
/*
* Generic virtual read/write
*/
/*#define outsw __arch_writesw
#define outsl __arch_writesl
#define outsb __arch_writesb
#define insb __arch_readsb
#define insw __arch_readsw
#define insl __arch_readsl*/
#define __io(a) ((void __iomem *)(a))
#define __mem_pci(a) (a)
#endif
include/asm-arm/arch-epxa10db/irqs.h 已删除 100644 → 0
浏览文件 @ b9abaa3f
/*
* linux/include/asm-arm/arch-camelot/irqs.h
*
* Copyright (C) 2001 Altera Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/* Use the Excalibur chip definitions */
#define INT_CTRL00_TYPE
#include "asm/arch/int_ctrl00.h"
#define IRQ_PLD0 INT_MS_P0_OFST
#define IRQ_PLD1 INT_MS_P1_OFST
#define IRQ_PLD2 INT_MS_P2_OFST
#define IRQ_PLD3 INT_MS_P3_OFST
#define IRQ_PLD4 INT_MS_P4_OFST
#define IRQ_PLD5 INT_MS_P5_OFST
#define IRQ_EXT INT_MS_IP_OFST
#define IRQ_UART INT_MS_UA_OFST
#define IRQ_TIMER0 INT_MS_T0_OFST
#define IRQ_TIMER1 INT_MS_T1_OFST
#define IRQ_PLL INT_MS_PLL_OFST
#define IRQ_EBI INT_MS_EBI_OFST
#define IRQ_STRIPE_BRIDGE INT_MS_PLL_OFST
#define IRQ_AHB_BRIDGE INT_MS_PLL_OFST
#define IRQ_COMMRX INT_MS_CR_OFST
#define IRQ_COMMTX INT_MS_CT_OFST
#define IRQ_FAST_COMM INT_MS_FC_OFST
#define NR_IRQS (INT_MS_FC_OFST + 1)
include/asm-arm/arch-epxa10db/memory.h 已删除 100644 → 0
浏览文件 @ b9abaa3f
/*
* linux/include/asm-arm/arch-epxa10/memory.h
*
* Copyright (C) 2001 Altera Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
/*
* Physical DRAM offset.
*/
#define PHYS_OFFSET UL(0x00000000)
/*
* Virtual view <-> DMA view memory address translations
* virt_to_bus: Used to translate the virtual address to an
* address suitable to be passed to set_dma_addr
* bus_to_virt: Used to convert an address for DMA operations
* to an address that the kernel can use.
*/
#define __virt_to_bus(x) (x - PAGE_OFFSET + /*SDRAM_BASE*/0)
#define __bus_to_virt(x) (x - /*SDRAM_BASE*/0 + PAGE_OFFSET)
#endif
include/asm-arm/arch-epxa10db/mode_ctrl00.h 已删除 100644 → 0
浏览文件 @ b9abaa3f
#ifndef __MODE_CTRL00_H
#define __MODE_CTRL00_H
/*
* Register definitions for the reset and mode control
*/
/*
* Copyright (C) 2001 Altera Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define BOOT_CR(BASE_ADDR) (MODE_CTRL00_TYPE (BASE_ADDR ))
#define BOOT_CR_BF_MSK (0x1)
#define BOOT_CR_BF_OFST (0)
#define BOOT_CR_HM_MSK (0x2)
#define BOOT_CR_HM_OFST (1)
#define BOOT_CR_RE_MSK (0x4)
#define BOOT_CR_RE_OFST (2)
#define RESET_SR(BASE_ADDR) (MODE_CTRL00_TYPE (BASE_ADDR + 0x4 ))
#define RESET_SR_WR_MSK (0x1)
#define RESET_SR_WR_OFST (0)
#define RESET_SR_CR_MSK (0x2)
#define RESET_SR_CR_OFST (1)
#define RESET_SR_JT_MSK (0x4)
#define RESET_SR_JT_OFST (2)
#define RESET_SR_ER_MSK (0x8)
#define RESET_SR_ER_OFST (3)
#define ID_CODE(BASE_ADDR) (MODE_CTRL00_TYPE (BASE_ADDR + 0x08 ))
#define SRAM0_SR(BASE_ADDR) (MODE_CTRL00_TYPE (BASE_ADDR + 0x20 ))
#define SRAM0_SR_SIZE_MSK (0xFFFFF000)
#define SRAM0_SR_SIZE_OFST (12)
#define SRAM1_SR(BASE_ADDR) (MODE_CTRL00_TYPE (BASE_ADDR + 0x24 ))
#define SRAM1_SR_SIZE_MSK (0xFFFFF000)
#define SRAM1_SR_SIZE_OFST (12)
#define DPSRAM0_SR(BASE_ADDR) (MODE_CTRL00_TYPE (BASE_ADDR + 0x30 ))
#define DPSRAM0_SR_MODE_MSK (0xF)
#define DPSRAM0_SR_MODE_OFST (0)
#define DPSRAM0_SR_GLBL_MSK (0x30)
#define DPSRAM0_SR_SIZE_MSK (0xFFFFF000)
#define DPSRAM0_SR_SIZE_OFST (12)
#define DPSRAM0_LCR(BASE_ADDR) (MODE_CTRL00_TYPE (BASE_ADDR + 0x34 ))
#define DPSRAM0_LCR_LCKADDR_MSK (0x1FFE0)
#define DPSRAM0_LCR_LCKADDR_OFST (4)
#define DPSRAM1_SR(BASE_ADDR) (MODE_CTRL00_TYPE (BASE_ADDR + 0x38 ))
#define DPSRAM1_SR_MODE_MSK (0xF)
#define DPSRAM1_SR_MODE_OFST (0)
#define DPSRAM1_SR_GLBL_MSK (0x30)
#define DPSRAM1_SR_GLBL_OFST (4)
#define DPSRAM1_SR_SIZE_MSK (0xFFFFF000)
#define DPSRAM1_SR_SIZE_OFST (12)
#define DPSRAM1_LCR(BASE_ADDR) (MODE_CTRL00_TYPE (BASE_ADDR + 0x3C ))
#define DPSRAM1_LCR_LCKADDR_MSK (0x1FFE0)
#define DPSRAM1_LCR_LCKADDR_OFST (4)
#endif /* __MODE_CTRL00_H */
include/asm-arm/arch-epxa10db/param.h 已删除 100644 → 0
浏览文件 @ b9abaa3f
/*
* linux/include/asm-arm/arch-epxa10db/param.h
*
* Copyright (C) 1999 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
include/asm-arm/arch-epxa10db/platform.h 已删除 100644 → 0
浏览文件 @ b9abaa3f
#ifndef PLATFORM_H
#define PLATFORM_H
#include "excalibur.h"
#define MAXIRQNUM 15
#endif
include/asm-arm/arch-epxa10db/pld_conf00.h 已删除 100644 → 0
浏览文件 @ b9abaa3f
#ifndef __PLD_CONF00_H
#define __PLD_CONF00_H
/*
* Register definitions for the PLD Configuration Logic
*/
/*
*
* This file contains the register definitions for the Excalibur
* Interrupt controller INT_CTRL00.
*
* Copyright (C) 2001 Altera Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define CONFIG_CONTROL(BASE_ADDR) (PLD_CONF00_TYPE (BASE_ADDR))
#define CONFIG_CONTROL_LK_MSK (0x1)
#define CONFIG_CONTROL_LK_OFST (0)
#define CONFIG_CONTROL_CO_MSK (0x2)
#define CONFIG_CONTROL_CO_OFST (1)
#define CONFIG_CONTROL_B_MSK (0x4)
#define CONFIG_CONTROL_B_OFST (2)
#define CONFIG_CONTROL_PC_MSK (0x8)
#define CONFIG_CONTROL_PC_OFST (3)
#define CONFIG_CONTROL_E_MSK (0x10)
#define CONFIG_CONTROL_E_OFST (4)
#define CONFIG_CONTROL_ES_MSK (0xE0)
#define CONFIG_CONTROL_ES_OFST (5)
#define CONFIG_CONTROL_ES_0_MSK (0x20)
#define CONFIG_CONTROL_ES_1_MSK (0x40)
#define CONFIG_CONTROL_ES_2_MSK (0x80)
#define CONFIG_CONTROL_CLOCK(BASE_ADDR) (PLD_CONF00_TYPE (BASE_ADDR + 0x4 ))
#define CONFIG_CONTROL_CLOCK_RATIO_MSK (0xFFFF)
#define CONFIG_CONTROL_CLOCK_RATIO_OFST (0)
#define CONFIG_CONTROL_DATA(BASE_ADDR) (PLD_CONF00_TYPE (BASE_ADDR + 0x8 ))
#define CONFIG_CONTROL_DATA_MSK (0xFFFFFFFF)
#define CONFIG_CONTROL_DATA_OFST (0)
#define CONFIG_UNLOCK(BASE_ADDR) (PLD_CONF00_TYPE (BASE_ADDR + 0xC ))
#define CONFIG_UNLOCK_MSK (0xFFFFFFFF)
#define CONFIG_UNLOCK_OFST (0)
#define CONFIG_UNLOCK_MAGIC (0x554E4C4B)
#endif /* __PLD_CONF00_H */
include/asm-arm/arch-epxa10db/system.h 已删除 100644 → 0
浏览文件 @ b9abaa3f
/*
* linux/include/asm-arm/arch-epxa10db/system.h
*
* Copyright (C) 1999 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
* Copyright (C) 2001 Altera Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
#include <asm/arch/platform.h>
static inline void arch_idle(void)
{
/*
* This should do all the clock switching
* and wait for interrupt tricks
*/
cpu_do_idle();
}
extern __inline__ void arch_reset(char mode)
{
/* Hmm... We can probably do something with the watchdog... */
}
#endif
include/asm-arm/arch-epxa10db/tdkphy.h 已删除 100644 → 0
浏览文件 @ b9abaa3f
/*
* linux/drivers/tdkphy.h
*
* Copyright (C) 2001 Altera Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __TDKPHY_H
#define __TDKPHY_H
/*
* Register definitions for the TDK 78Q2120 PHY
* which is on the Camelot board
*/
/*
* Copyright (c) Altera Corporation 2000.
* All rights reserved.
*/
#define PHY_CONTROL (0)
#define PHY_CONTROL_COLT_MSK (0x80)
#define PHY_CONTROL_COLT_OFST (7)
#define PHY_CONTROL_DUPLEX_MSK (0x100)
#define PHY_CONTROL_DUPLEX_OFST (8)
#define PHY_CONTROL_RANEG_MSK (0x200)
#define PHY_CONTROL_RANEG_OFST (9)
#define PHY_CONTROL_ISO_MSK (0x400)
#define PHY_CONTROL_ISO_OFST (10)
#define PHY_CONTROL_PWRDN_MSK (0x800)
#define PHY_CONTROL_PWRDN_OFST (11)
#define PHY_CONTROL_ANEGEN_MSK (0x1000)
#define PHY_CONTROL_ANEGEN_OFST (12)
#define PHY_CONTROL_SPEEDSL_MSK (0x2000)
#define PHY_CONTROL_SPEEDSL_OFST (13)
#define PHY_CONTROL_LOOPBK_MSK (0x4000)
#define PHY_CONTROL_LOOPBK_OFST (14)
#define PHY_CONTROL_RESET_MSK (0x8000)
#define PHY_CONTROL_RESET_OFST (15)
#define PHY_STATUS (1)
#define PHY_STATUS_ETXD_MSK (0x1)
#define PHY_STATUS_EXTD_OFST (0)
#define PHY_STATUS_JAB_MSK (0x2)
#define PHY_STATUS_JAB_OFST (1)
#define PHY_STATUS_LINK_MSK (0x4)
#define PHY_STATUS_LINK_OFST (2)
#define PHY_STATUS_ANEGA_MSK (0x8)
#define PHY_STATUS_ANEGA_OFST (3)
#define PHY_STATUS_RFAULT_MSK (0x10)
#define PHY_STATUS_RFAULT_OFST (4)
#define PHY_STATUS_ANEGC_MSK (0x20)
#define PHY_STATUS_ANEGC_OFST (5)
#define PHY_STATUS_10T_H_MSK (0x800)
#define PHY_STATUS_10T_H_OFST (11)
#define PHY_STATUS_10T_F_MSK (0x1000)
#define PHY_STATUS_10T_F_OFST (12)
#define PHY_STATUS_100_X_H_MSK (0x2000)
#define PHY_STATUS_100_X_H_OFST (13)
#define PHY_STATUS_100_X_F_MSK (0x4000)
#define PHY_STATUS_100_X_F_OFST (14)
#define PHY_STATUS_100T4_MSK (0x8000)
#define PHY_STATUS_100T4_OFST (15)
#define PHY_ID1 (2)
#define PHY_ID1_OUI_MSK (0xFFFF)
#define PHY_ID1_OUI_OFST (0)
#define PHY_ID2 (3)
#define PHY_ID2_RN_MSK (0xF)
#define PHY_ID2_RN_OFST (0)
#define PHY_ID2_MN_MSK (0x3F0)
#define PHY_ID2_MN_OFST (4)
#define PHY_ID2_OUI_MSK (0xFC00)
#define PHY_ID2_OUI_OFST (10)
#define PHY_AUTO_NEG_ADVERTISEMENT (4)
#define PHY_AUTO_NEG_ADVERTISEMENT_SELECTOR_MSK (0x1F)
#define PHY_AUTO_NEG_ADVERTISEMENT_SELECTOR_OFST (0)
#define PHY_AUTO_NEG_ADVERTISEMENT_A0_MSK (0x20)
#define PHY_AUTO_NEG_ADVERTISEMENT_A0_OFST (5)
#define PHY_AUTO_NEG_ADVERTISEMENT_A1_MSK (0x40)
#define PHY_AUTO_NEG_ADVERTISEMENT_A1_OFST (6)
#define PHY_AUTO_NEG_ADVERTISEMENT_A2_MSK (0x80)
#define PHY_AUTO_NEG_ADVERTISEMENT_A2_OFST (7)
#define PHY_AUTO_NEG_ADVERTISEMENT_A3_MSK (0x100)
#define PHY_AUTO_NEG_ADVERTISEMENT_A3_OFST (8)
#define PHY_AUTO_NEG_ADVERTISEMENT_A4_MSK (0x200)
#define PHY_AUTO_NEG_ADVERTISEMENT_A4_OFST (9)
#define PHY_AUTO_NEG_ADVERTISEMENT_TAF_MSK (0x1FE0)
#define PHY_AUTO_NEG_ADVERTISEMENT_TAF_OFST (5)
#define PHY_AUTO_NEG_ADVERTISEMENT_RF_MSK (0x2000)
#define PHY_AUTO_NEG_ADVERTISEMENT_RF_OFST (13)
#define PHY_AUTO_NEG_ADVERTISEMENT_RSVD_MSK (0x4000)
#define PHY_AUTO_NEG_ADVERTISEMENT_RVSD_OFST (14)
#define PHY_AUTO_NEG_ADVERTISEMENT_NP_MSK (0x8000)
#define PHY_AUTO_NEG_ADVERTISEMENT_NP_OFST (15)
#define PHY_AUTO_NEG_LINK_PARTNER (5)
#define PHY_AUTO_NEG_LINK_PARTNER_S4_MSK (0x1F)
#define PHY_AUTO_NEG_LINK_PARTNER_S4_OFST (0)
#define PHY_AUTO_NEG_LINK_PARTNER_A7_MSK (0x1FE0)
#define PHY_AUTO_NEG_LINK_PARTNER_A7_OFST (5)
#define PHY_AUTO_NEG_LINK_PARTNER_RF_MSK (0x2000)
#define PHY_AUTO_NEG_LINK_PARTNER_RF_OFST (13)
#define PHY_AUTO_NEG_LINK_PARTNER_ACK_MSK (0x4000)
#define PHY_AUTO_NEG_LINK_PARTNER_ACK_OFST (14)
#define PHY_AUTO_NEG_LINK_PARTNER_NP_MSK (0x8000)
#define PHY_AUTO_NEG_LINK_PARTNER_NP_OFST (15)
#define PHY_AUTO_NEG_EXPANSION (6)
#define PHY_AUTO_NEG_EXPANSION_LPANEGA_MSK (0x1)
#define PHY_AUTO_NEG_EXPANSION_LPANEGA_OFST (0)
#define PHY_AUTO_NEG_EXPANSION_PRX_MSK (0x2)
#define PHY_AUTO_NEG_EXPANSION_PRX_OFST (1)
#define PHY_AUTO_NEG_EXPANSION_NPA_MSK (0x4)
#define PHY_AUTO_NEG_EXPANSION_NPA_OFST (2)
#define PHY_AUTO_NEG_EXPANSION_LPNPA_MSK (0x8)
#define PHY_AUTO_NEG_EXPANSION_LPNPA_OFST (3)
#define PHY_AUTO_NEG_EXPANSION_PDF_MSK (0x10)
#define PHY_AUTO_NEG_EXPANSION_PDF_OFST (4)
#define PHY_VENDOR_SPECIFIC (16)
#define PHY_VENDOR_SPECIFIC_RXCC_MSK (0x1)
#define PHY_VENDOR_SPECIFIC_RXCC_OFST (0)
#define PHY_VENDOR_SPECIFIC_PCSBP_MSK (0x2)
#define PHY_VENDOR_SPECIFIC_PCSBP_OFST (1)
#define PHY_VENDOR_SPECIFIC_RVSPOL_MSK (0x10)
#define PHY_VENDOR_SPECIFIC_RVSPOL_OFST (4)
#define PHY_VENDOR_SPECIFIC_APOL_MSK (0x20)
#define PHY_VENDOR_SPECIFIC_APOL_OFST (5)
#define PHY_VENDOR_SPECIFIC_GPIO0_DIR_MSK (0x40)
#define PHY_VENDOR_SPECIFIC_GPIO0_DIR_OFST (6)
#define PHY_VENDOR_SPECIFIC_GPIO0_DAT_MSK (0x80)
#define PHY_VENDOR_SPECIFIC_GPIO0_DAT_OFST (7)
#define PHY_VENDOR_SPECIFIC_GPIO1_DIR_MSK (0x100)
#define PHY_VENDOR_SPECIFIC_GPIO1_DIR_OFST (8)
#define PHY_VENDOR_SPECIFIC_GPIO1_DAT_MSK (0x200)
#define PHY_VENDOR_SPECIFIC_GPIO1_DAT_OFST (9)
#define PHY_VENDOR_SPECIFIC_10BT_NATURAL_LOOPBACK_DAT_MSK (0x400)
#define PHY_VENDOR_SPECIFIC_10BT_NATURAL_LOOPBACK_DAT_OFST (10)
#define PHY_VENDOR_SPECIFIC_10BT_SQE_TEST_INHIBIT_MSK (0x800)
#define PHY_VENDOR_SPECIFIC_10BT_SQE_TEST_INHIBIT_OFST (11)
#define PHY_VENDOR_SPECIFIC_TXHIM_MSK (0x1000)
#define PHY_VENDOR_SPECIFIC_TXHIM_OFST (12)
#define PHY_VENDOR_SPECIFIC_INT_LEVEL_MSK (0x4000)
#define PHY_VENDOR_SPECIFIC_INT_LEVEL_OFST (14)
#define PHY_VENDOR_SPECIFIC_RPTR_MSK (0x8000)
#define PHY_VENDOR_SPECIFIC_RPTR_OFST (15)
#define PHY_IRQ_CONTROL (17)
#define PHY_IRQ_CONTROL_ANEG_COMP_INT_MSK (0x1)
#define PHY_IRQ_CONTROL_ANEG_COMP_INT_OFST (0)
#define PHY_IRQ_CONTROL_RFAULT_INT_MSK (0x2)
#define PHY_IRQ_CONTROL_RFAULT_INT_OFST (1)
#define PHY_IRQ_CONTROL_LS_CHG_INT_MSK (0x4)
#define PHY_IRQ_CONTROL_LS_CHG_INT_OFST (2)
#define PHY_IRQ_CONTROL_LP_ACK_INT_MSK (0x8)
#define PHY_IRQ_CONTROL_LP_ACK_INT_OFST (3)
#define PHY_IRQ_CONTROL_PDF_INT_MSK (0x10)
#define PHY_IRQ_CONTROL_PDF_INT_OFST (4)
#define PHY_IRQ_CONTROL_PRX_INT_MSK (0x20)
#define PHY_IRQ_CONTROL_PRX_INT_OFST (5)
#define PHY_IRQ_CONTROL_RXER_INT_MSK (0x40)
#define PHY_IRQ_CONTROL_RXER_INT_OFST (6)
#define PHY_IRQ_CONTROL_JABBER_INT_MSK (0x80)
#define PHY_IRQ_CONTROL_JABBER_INT_OFST (7)
#define PHY_IRQ_CONTROL_ANEG_COMP_IE_MSK (0x100)
#define PHY_IRQ_CONTROL_ANEG_COMP_IE_OFST (8)
#define PHY_IRQ_CONTROL_RFAULT_IE_MSK (0x200)
#define PHY_IRQ_CONTROL_RFAULT_IE_OFST (9)
#define PHY_IRQ_CONTROL_LS_CHG_IE_MSK (0x400)
#define PHY_IRQ_CONTROL_LS_CHG_IE_OFST (10)
#define PHY_IRQ_CONTROL_LP_ACK_IE_MSK (0x800)
#define PHY_IRQ_CONTROL_LP_ACK_IE_OFST (11)
#define PHY_IRQ_CONTROL_PDF_IE_MSK (0x1000)
#define PHY_IRQ_CONTROL_PDF_IE_OFST (12)
#define PHY_IRQ_CONTROL_PRX_IE_MSK (0x2000)
#define PHY_IRQ_CONTROL_PRX_IE_OFST (13)
#define PHY_IRQ_CONTROL_RXER_IE_MSK (0x4000)
#define PHY_IRQ_CONTROL_RXER_IE_OFST (14)
#define PHY_IRQ_CONTROL_JABBER_IE_MSK (0x8000)
#define PHY_IRQ_CONTROL_JABBER_IE_OFST (15)
#define PHY_DIAGNOSTIC (18)
#define PHY_DIAGNOSTIC_RX_LOCK_MSK (0x100)
#define PHY_DIAGNOSTIC_RX_LOCK_OFST (8)
#define PHY_DIAGNOSTIC_RX_PASS_MSK (0x200)
#define PHY_DIAGNOSTIC_RX_PASS_OFST (9)
#define PHY_DIAGNOSTIC_RATE_MSK (0x400)
#define PHY_DIAGNOSTIC_RATE_OFST (10)
#define PHY_DIAGNOSTIC_DPLX_MSK (0x800)
#define PHY_DIAGNOSTIC_DPLX_OFST (11)
#define PHY_DIAGNOSTIC_ANEGF_MSK (0x1000)
#define PHY_DIAGNOSTIC_ANEGF_OFST (12)
#endif /* __TDKPHY_H */
include/asm-arm/arch-epxa10db/timer00.h 已删除 100644 → 0
浏览文件 @ b9abaa3f
/*
*
* This file contains the register definitions for the Excalibur
* Timer TIMER00.
*
* Copyright (C) 2001 Altera Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __TIMER00_H
#define __TIMER00_H
/*
* Register definitions for the timers
*/
#define TIMER0_CR(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR + 0x00 ))
#define TIMER0_CR_B_MSK (0x20)
#define TIMER0_CR_B_OFST (0x5)
#define TIMER0_CR_S_MSK (0x10)
#define TIMER0_CR_S_OFST (0x4)
#define TIMER0_CR_CI_MSK (0x08)
#define TIMER0_CR_CI_OFST (0x3)
#define TIMER0_CR_IE_MSK (0x04)
#define TIMER0_CR_IE_OFST (0x2)
#define TIMER0_CR_MODE_MSK (0x3)
#define TIMER0_CR_MODE_OFST (0)
#define TIMER0_CR_MODE_FREE (0)
#define TIMER0_CR_MODE_ONE (1)
#define TIMER0_CR_MODE_INTVL (2)
#define TIMER0_SR(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR + 0x00 ))
#define TIMER0_SR_B_MSK (0x20)
#define TIMER0_SR_B_OFST (0x5)
#define TIMER0_SR_S_MSK (0x10)
#define TIMER0_SR_S_OFST (0x4)
#define TIMER0_SR_CI_MSK (0x08)
#define TIMER0_SR_CI_OFST (0x3)
#define TIMER0_SR_IE_MSK (0x04)
#define TIMER0_SR_IE_OFST (0x2)
#define TIMER0_SR_MODE_MSK (0x3)
#define TIMER0_SR_MODE_OFST (0)
#define TIMER0_SR_MODE_FREE (0)
#define TIMER0_SR_MODE_ONE (1)
#define TIMER0_SR_MODE_INTVL (2)
#define TIMER0_PRESCALE(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR + 0x010 ))
#define TIMER0_LIMIT(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR + 0x020 ))
#define TIMER0_READ(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR + 0x030 ))
#define TIMER1_CR(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR + 0x40 ))
#define TIMER1_CR_B_MSK (0x20)
#define TIMER1_CR_B_OFST (0x5)
#define TIMER1_CR_S_MSK (0x10)
#define TIMER1_CR_S_OFST (0x4)
#define TIMER1_CR_CI_MSK (0x08)
#define TIMER1_CR_CI_OFST (0x3)
#define TIMER1_CR_IE_MSK (0x04)
#define TIMER1_CR_IE_OFST (0x2)
#define TIMER1_CR_MODE_MSK (0x3)
#define TIMER1_CR_MODE_OFST (0)
#define TIMER1_CR_MODE_FREE (0)
#define TIMER1_CR_MODE_ONE (1)
#define TIMER1_CR_MODE_INTVL (2)
#define TIMER1_SR(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR + 0x40 ))
#define TIMER1_SR_B_MSK (0x20)
#define TIMER1_SR_B_OFST (0x5)
#define TIMER1_SR_S_MSK (0x10)
#define TIMER1_SR_S_OFST (0x4)
#define TIMER1_SR_CI_MSK (0x08)
#define TIMER1_SR_CI_OFST (0x3)
#define TIMER1_SR_IE_MSK (0x04)
#define TIMER1_SR_IE_OFST (0x2)
#define TIMER1_SR_MODE_MSK (0x3)
#define TIMER1_SR_MODE_OFST (0)
#define TIMER1_SR_MODE_FREE (0)
#define TIMER1_SR_MODE_ONE (1)
#define TIMER1_SR_MODE_INTVL (2)
#define TIMER1_PRESCALE(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR + 0x050 ))
#define TIMER1_LIMIT(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR + 0x060 ))
#define TIMER1_READ(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR + 0x070 ))
#endif /* __TIMER00_H */
include/asm-arm/arch-epxa10db/timex.h 已删除 100644 → 0
浏览文件 @ b9abaa3f
/*
* linux/include/asm-arm/arch-epxa10db/timex.h
*
* Excalibur timex specifications
*
* Copyright (C) 2001 Altera Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* ??
*/
#define CLOCK_TICK_RATE (50000000 / 16)
include/asm-arm/arch-epxa10db/uart00.h 已删除 100644 → 0
浏览文件 @ b9abaa3f
/* *
* Copyright (C) 2001 Altera Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __UART00_H
#define __UART00_H
/*
* Register definitions for the UART
*/
#define UART_TX_FIFO_SIZE (15)
#define UART_RSR(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x00 ))
#define UART_RSR_RX_LEVEL_MSK (0x1f)
#define UART_RSR_RX_LEVEL_OFST (0)
#define UART_RSR_RE_MSK (0x80)
#define UART_RSR_RE_OFST (7)
#define UART_RDS(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x04 ))
#define UART_RDS_BI_MSK (0x8)
#define UART_RDS_BI_OFST (4)
#define UART_RDS_FE_MSK (0x4)
#define UART_RDS_FE_OFST (2)
#define UART_RDS_PE_MSK (0x2)
#define UART_RDS_PE_OFST (1)
#define UART_RDS_OE_MSK (0x1)
#define UART_RDS_OE_OFST (0)
#define UART_RD(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x08 ))
#define UART_RD_RX_DATA_MSK (0xff)
#define UART_RD_RX_DATA_OFST (0)
#define UART_TSR(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x0c ))
#define UART_TSR_TX_LEVEL_MSK (0x1f)
#define UART_TSR_TX_LEVEL_OFST (0)
#define UART_TSR_TXI_MSK (0x80)
#define UART_TSR_TXI_OFST (7)
#define UART_TD(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x10 ))
#define UART_TD_TX_DATA_MSK (0xff)
#define UART_TD_TX_DATA_OFST (0)
#define UART_FCR(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x14 ))
#define UART_FCR_RX_THR_MSK (0xd0)
#define UART_FCR_RX_THR_OFST (5)
#define UART_FCR_RX_THR_1 (0x00)
#define UART_FCR_RX_THR_2 (0x20)
#define UART_FCR_RX_THR_4 (0x40)
#define UART_FCR_RX_THR_6 (0x60)
#define UART_FCR_RX_THR_8 (0x80)
#define UART_FCR_RX_THR_10 (0xa0)
#define UART_FCR_RX_THR_12 (0xc0)
#define UART_FCR_RX_THR_14 (0xd0)
#define UART_FCR_TX_THR_MSK (0x1c)
#define UART_FCR_TX_THR_OFST (2)
#define UART_FCR_TX_THR_0 (0x00)
#define UART_FCR_TX_THR_2 (0x04)
#define UART_FCR_TX_THR_4 (0x08)
#define UART_FCR_TX_THR_8 (0x0c)
#define UART_FCR_TX_THR_10 (0x10)
#define UART_FCR_TX_THR_12 (0x14)
#define UART_FCR_TX_THR_14 (0x18)
#define UART_FCR_TX_THR_15 (0x1c)
#define UART_FCR_RC_MSK (0x02)
#define UART_FCR_RC_OFST (1)
#define UART_FCR_TC_MSK (0x01)
#define UART_FCR_TC_OFST (0)
#define UART_IES(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x18 ))
#define UART_IES_ME_MSK (0x8)
#define UART_IES_ME_OFST (3)
#define UART_IES_TIE_MSK (0x4)
#define UART_IES_TIE_OFST (2)
#define UART_IES_TE_MSK (0x2)
#define UART_IES_TE_OFST (1)
#define UART_IES_RE_MSK (0x1)
#define UART_IES_RE_OFST (0)
#define UART_IEC(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x1c ))
#define UART_IEC_ME_MSK (0x8)
#define UART_IEC_ME_OFST (3)
#define UART_IEC_TIE_MSK (0x4)
#define UART_IEC_TIE_OFST (2)
#define UART_IEC_TE_MSK (0x2)
#define UART_IEC_TE_OFST (1)
#define UART_IEC_RE_MSK (0x1)
#define UART_IEC_RE_OFST (0)
#define UART_ISR(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x20 ))
#define UART_ISR_MI_MSK (0x8)
#define UART_ISR_MI_OFST (3)
#define UART_ISR_TII_MSK (0x4)
#define UART_ISR_TII_OFST (2)
#define UART_ISR_TI_MSK (0x2)
#define UART_ISR_TI_OFST (1)
#define UART_ISR_RI_MSK (0x1)
#define UART_ISR_RI_OFST (0)
#define UART_IID(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x24 ))
#define UART_IID_IID_MSK (0x7)
#define UART_IID_IID_OFST (0)
#define UART_MC(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x28 ))
#define UART_MC_OE_MSK (0x40)
#define UART_MC_OE_OFST (6)
#define UART_MC_SP_MSK (0x20)
#define UART_MC_SP_OFST (5)
#define UART_MC_EP_MSK (0x10)
#define UART_MC_EP_OFST (4)
#define UART_MC_PE_MSK (0x08)
#define UART_MC_PE_OFST (3)
#define UART_MC_ST_MSK (0x04)
#define UART_MC_ST_ONE (0x0)
#define UART_MC_ST_TWO (0x04)
#define UART_MC_ST_OFST (2)
#define UART_MC_CLS_MSK (0x03)
#define UART_MC_CLS_OFST (0)
#define UART_MC_CLS_CHARLEN_5 (0)
#define UART_MC_CLS_CHARLEN_6 (1)
#define UART_MC_CLS_CHARLEN_7 (2)
#define UART_MC_CLS_CHARLEN_8 (3)
#define UART_MCR(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x2c ))
#define UART_MCR_AC_MSK (0x80)
#define UART_MCR_AC_OFST (7)
#define UART_MCR_AR_MSK (0x40)
#define UART_MCR_AR_OFST (6)
#define UART_MCR_BR_MSK (0x20)
#define UART_MCR_BR_OFST (5)
#define UART_MCR_LB_MSK (0x10)
#define UART_MCR_LB_OFST (4)
#define UART_MCR_DCD_MSK (0x08)
#define UART_MCR_DCD_OFST (3)
#define UART_MCR_RI_MSK (0x04)
#define UART_MCR_RI_OFST (2)
#define UART_MCR_DTR_MSK (0x02)
#define UART_MCR_DTR_OFST (1)
#define UART_MCR_RTS_MSK (0x01)
#define UART_MCR_RTS_OFST (0)
#define UART_MSR(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x30 ))
#define UART_MSR_DCD_MSK (0x80)
#define UART_MSR_DCD_OFST (7)
#define UART_MSR_RI_MSK (0x40)
#define UART_MSR_RI_OFST (6)
#define UART_MSR_DSR_MSK (0x20)
#define UART_MSR_DSR_OFST (5)
#define UART_MSR_CTS_MSK (0x10)
#define UART_MSR_CTS_OFST (4)
#define UART_MSR_DDCD_MSK (0x08)
#define UART_MSR_DDCD_OFST (3)
#define UART_MSR_TERI_MSK (0x04)
#define UART_MSR_TERI_OFST (2)
#define UART_MSR_DDSR_MSK (0x02)
#define UART_MSR_DDSR_OFST (1)
#define UART_MSR_DCTS_MSK (0x01)
#define UART_MSR_DCTS_OFST (0)
#define UART_DIV_LO(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x34 ))
#define UART_DIV_LO_DIV_MSK (0xff)
#define UART_DIV_LO_DIV_OFST (0)
#define UART_DIV_HI(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x38 ))
#define UART_DIV_HI_DIV_MSK (0xff)
#define UART_DIV_HI_DIV_OFST (0)
#endif /* __UART00_H */
include/asm-arm/arch-epxa10db/uncompress.h 已删除 100644 → 0
浏览文件 @ b9abaa3f
此差异已折叠。
include/asm-arm/arch-epxa10db/vmalloc.h 已删除 100644 → 0
浏览文件 @ b9abaa3f
/*
* linux/include/asm-arm/arch-epxa10db/vmalloc.h
*
* Copyright (C) 2000 Russell King.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或