pcmcia: do not request windows if you don't need to

Several drivers contained dummy code to request for memory windows,
even though they never made use of it. Remove all such code
snippets.

CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

drivers/isdn/hisax/sedlbauer_cs.c

@@ -171,8 +171,6 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev,
 				  unsigned int vcc,
 				  void *priv_data)
 {
-	win_req_t *req = priv_data;
-
 	if (cfg->index == 0)
 		return -ENODEV;
 
@@ -219,31 +217,6 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev,
 			return -ENODEV;
 	}
 
-	/*
-	  Now set up a common memory window, if needed.  There is room
-	  in the struct pcmcia_device structure for one memory window handle,
-	  but if the base addresses need to be saved, or if multiple
-	  windows are needed, the info should go in the private data
-	  structure for this device.
-
-	  Note that the memory window base is a physical address, and
-	  needs to be mapped to virtual space with ioremap() before it
-	  is used.
-	*/
-	if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
-		cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
-		req->Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
-		req->Attributes |= WIN_ENABLE;
-		req->Base = mem->win[0].host_addr;
-		req->Size = mem->win[0].len;
-		req->AccessSpeed = 0;
-		if (pcmcia_request_window(p_dev, req, &p_dev->win) != 0)
-			return -ENODEV;
-
-		if (pcmcia_map_mem_page(p_dev, p_dev->win,
-						mem->win[0].card_addr) != 0)
-			return -ENODEV;
-	}
 	return 0;
 }
 
@@ -251,16 +224,11 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev,
 
 static int __devinit sedlbauer_config(struct pcmcia_device *link)
 {
-    win_req_t *req;
     int ret;
     IsdnCard_t  icard;
 
     dev_dbg(&link->dev, "sedlbauer_config(0x%p)\n", link);
 
-    req = kzalloc(sizeof(win_req_t), GFP_KERNEL);
-    if (!req)
-	    return -ENOMEM;
-
     /*
       In this loop, we scan the CIS for configuration table entries,
       each of which describes a valid card configuration, including
@@ -273,7 +241,7 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link)
       these things without consulting the CIS, and most client drivers
       will only use the CIS to fill in implementation-defined details.
     */
-    ret = pcmcia_loop_config(link, sedlbauer_config_check, req);
+    ret = pcmcia_loop_config(link, sedlbauer_config_check, NULL);
     if (ret)
 	    goto failed;
 
@@ -297,9 +265,6 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link)
 	printk(" & %pR", link->resource[0]);
     if (link->resource[1])
 	printk(" & %pR", link->resource[1]);
-    if (link->win)
-	printk(", mem 0x%06lx-0x%06lx", req->Base,
-	       req->Base+req->Size-1);
     printk("\n");
 
     icard.para[0] = link->irq;

drivers/net/wireless/airo_cs.c

@@ -154,8 +154,6 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev,
 				unsigned int vcc,
 				void *priv_data)
 {
-	win_req_t *req = priv_data;
-
 	if (cfg->index == 0)
 		return -ENODEV;
 
@@ -194,29 +192,6 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev,
 	if (pcmcia_request_io(p_dev) != 0)
 		return -ENODEV;
 
-	/*
-	  Now set up a common memory window, if needed.  There is room
-	  in the struct pcmcia_device structure for one memory window handle,
-	  but if the base addresses need to be saved, or if multiple
-	  windows are needed, the info should go in the private data
-	  structure for this device.
-
-	  Note that the memory window base is a physical address, and
-	  needs to be mapped to virtual space with ioremap() before it
-	  is used.
-	*/
-	if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
-		cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
-		req->Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
-		req->Base = mem->win[0].host_addr;
-		req->Size = mem->win[0].len;
-		req->AccessSpeed = 0;
-		if (pcmcia_request_window(p_dev, req, &p_dev->win) != 0)
-			return -ENODEV;
-		if (pcmcia_map_mem_page(p_dev, p_dev->win,
-						mem->win[0].card_addr) != 0)
-			return -ENODEV;
-	}
 	/* If we got this far, we're cool! */
 	return 0;
 }
@@ -225,17 +200,12 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev,
 static int airo_config(struct pcmcia_device *link)
 {
 	local_info_t *dev;
-	win_req_t *req;
 	int ret;
 
 	dev = link->priv;
 
 	dev_dbg(&link->dev, "airo_config\n");
 
-	req = kzalloc(sizeof(win_req_t), GFP_KERNEL);
-	if (!req)
-		return -ENOMEM;
-
 	/*
 	 * In this loop, we scan the CIS for configuration table
 	 * entries, each of which describes a valid card
@@ -250,7 +220,7 @@ static int airo_config(struct pcmcia_device *link)
 	 * and most client drivers will only use the CIS to fill in
 	 * implementation-defined details.
 	 */
-	ret = pcmcia_loop_config(link, airo_cs_config_check, req);
+	ret = pcmcia_loop_config(link, airo_cs_config_check, NULL);
 	if (ret)
 		goto failed;
 
@@ -281,16 +251,11 @@ static int airo_config(struct pcmcia_device *link)
 		printk(" & %pR", link->resource[0]);
 	if (link->resource[1])
 		printk(" & %pR", link->resource[1]);
-	if (link->win)
-		printk(", mem 0x%06lx-0x%06lx", req->Base,
-		       req->Base+req->Size-1);
 	printk("\n");
-	kfree(req);
 	return 0;
 
  failed:
 	airo_release(link);
-	kfree(req);
 	return -ENODEV;
 } /* airo_config */
 

drivers/staging/comedi/drivers/ni_daq_700.c

@@ -555,8 +555,6 @@ static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev,
 				unsigned int vcc,
 				void *priv_data)
 {
-	win_req_t *req = priv_data;
-
 	if (cfg->index == 0)
 		return -ENODEV;
 
@@ -589,22 +587,6 @@ static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev,
 			return -ENODEV;
 	}
 
-	if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
-		cistpl_mem_t *mem =
-			(cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
-		req->Attributes = WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM;
-		req->Attributes |= WIN_ENABLE;
-		req->Base = mem->win[0].host_addr;
-		req->Size = mem->win[0].len;
-		if (req->Size < 0x1000)
-			req->Size = 0x1000;
-		req->AccessSpeed = 0;
-		if (pcmcia_request_window(p_dev, req, &p_dev->win))
-			return -ENODEV;
-		if (pcmcia_map_mem_page(p_dev, p_dev->win,
-				mem->win[0].card_addr))
-			return -ENODEV;
-	}
 	/* If we got this far, we're cool! */
 	return 0;
 }
@@ -618,7 +600,7 @@ static void dio700_config(struct pcmcia_device *link)
 
 	dev_dbg(&link->dev, "dio700_config\n");
 
-	ret = pcmcia_loop_config(link, dio700_pcmcia_config_loop, &req);
+	ret = pcmcia_loop_config(link, dio700_pcmcia_config_loop, NULL);
 	if (ret) {
 		dev_warn(&link->dev, "no configuration found\n");
 		goto failed;
@@ -644,9 +626,6 @@ static void dio700_config(struct pcmcia_device *link)
 		printk(", io %pR", link->resource[0]);
 	if (link->resource[1])
 		printk(" & %pR", link->resource[1]);
-	if (link->win)
-		printk(", mem 0x%06lx-0x%06lx", req.Base,
-		       req.Base + req.Size - 1);
 	printk("\n");
 
 	return;

drivers/staging/comedi/drivers/ni_daq_dio24.c

@@ -307,8 +307,6 @@ static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev,
 				unsigned int vcc,
 				void *priv_data)
 {
-	win_req_t *req = priv_data;
-
 	if (cfg->index == 0)
 		return -ENODEV;
 
@@ -341,22 +339,6 @@ static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev,
 			return -ENODEV;
 	}
 
-	if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
-		cistpl_mem_t *mem =
-			(cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
-		req->Attributes = WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM;
-		req->Attributes |= WIN_ENABLE;
-		req->Base = mem->win[0].host_addr;
-		req->Size = mem->win[0].len;
-		if (req->Size < 0x1000)
-			req->Size = 0x1000;
-		req->AccessSpeed = 0;
-		if (pcmcia_request_window(p_dev, req, &p_dev->win))
-			return -ENODEV;
-		if (pcmcia_map_mem_page(p_dev, p_dev->win,
-						mem->win[0].card_addr))
-			return -ENODEV;
-	}
 	/* If we got this far, we're cool! */
 	return 0;
 }
@@ -364,13 +346,12 @@ static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev,
 static void dio24_config(struct pcmcia_device *link)
 {
 	int ret;
-	win_req_t req;
 
 	printk(KERN_INFO "ni_daq_dio24: HOLA SOY YO! - config\n");
 
 	dev_dbg(&link->dev, "dio24_config\n");
 
-	ret = pcmcia_loop_config(link, dio24_pcmcia_config_loop, &req);
+	ret = pcmcia_loop_config(link, dio24_pcmcia_config_loop, NULL);
 	if (ret) {
 		dev_warn(&link->dev, "no configuration found\n");
 		goto failed;
@@ -396,9 +377,6 @@ static void dio24_config(struct pcmcia_device *link)
 		printk(" & %pR", link->resource[0]);
 	if (link->resource[1])
 		printk(" & %pR", link->resource[1]);
-	if (link->win)
-		printk(", mem 0x%06lx-0x%06lx", req.Base,
-		       req.Base + req.Size - 1);
 	printk("\n");
 
 	return;

drivers/staging/comedi/drivers/ni_labpc_cs.c

@@ -285,8 +285,6 @@ static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev,
 				unsigned int vcc,
 				void *priv_data)
 {
-	win_req_t *req = priv_data;
-
 	if (cfg->index == 0)
 		return -ENODEV;
 
@@ -319,22 +317,6 @@ static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev,
 			return -ENODEV;
 	}
 
-	if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
-		cistpl_mem_t *mem =
-			(cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
-		req->Attributes = WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM;
-		req->Attributes |= WIN_ENABLE;
-		req->Base = mem->win[0].host_addr;
-		req->Size = mem->win[0].len;
-		if (req->Size < 0x1000)
-			req->Size = 0x1000;
-		req->AccessSpeed = 0;
-		if (pcmcia_request_window(p_dev, req, &p_dev->win))
-			return -ENODEV;
-		if (pcmcia_map_mem_page(p_dev, p_dev->win,
-						mem->win[0].card_addr))
-			return -ENODEV;
-	}
 	/* If we got this far, we're cool! */
 	return 0;
 }
@@ -343,11 +325,10 @@ static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev,
 static void labpc_config(struct pcmcia_device *link)
 {
 	int ret;
-	win_req_t req;
 
 	dev_dbg(&link->dev, "labpc_config\n");
 
-	ret = pcmcia_loop_config(link, labpc_pcmcia_config_loop, &req);
+	ret = pcmcia_loop_config(link, labpc_pcmcia_config_loop, NULL);
 	if (ret) {
 		dev_warn(&link->dev, "no configuration found\n");
 		goto failed;
@@ -373,9 +354,6 @@ static void labpc_config(struct pcmcia_device *link)
 		printk(" & %pR", link->resource[0]);
 	if (link->resource[1])
 		printk(" & %pR", link->resource[1]);
-	if (link->win)
-		printk(", mem 0x%06lx-0x%06lx", req.Base,
-		       req.Base + req.Size - 1);
 	printk("\n");
 
 	return;