Merge branch 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6

* 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  tty/n_gsm: fix bug in CRC calculation for gsm1 mode
  serial/imx: read cts state only after acking cts change irq
  parport_pc.c: correctly release the requested region for the IT887x

drivers/parport/parport_pc.c

@@ -2550,7 +2550,6 @@ static int __devinit sio_ite_8872_probe(struct pci_dev *pdev, int autoirq,
 					 const struct parport_pc_via_data *via)
 {
 	short inta_addr[6] = { 0x2A0, 0x2C0, 0x220, 0x240, 0x1E0 };
-	struct resource *base_res;
 	u32 ite8872set;
 	u32 ite8872_lpt, ite8872_lpthi;
 	u8 ite8872_irq, type;
@@ -2561,8 +2560,7 @@ static int __devinit sio_ite_8872_probe(struct pci_dev *pdev, int autoirq,
 
 	/* make sure which one chip */
 	for (i = 0; i < 5; i++) {
-		base_res = request_region(inta_addr[i], 32, "it887x");
-		if (base_res) {
+		if (request_region(inta_addr[i], 32, "it887x")) {
 			int test;
 			pci_write_config_dword(pdev, 0x60,
 						0xe5000000 | inta_addr[i]);
@@ -2571,7 +2569,7 @@ static int __devinit sio_ite_8872_probe(struct pci_dev *pdev, int autoirq,
 			test = inb(inta_addr[i]);
 			if (test != 0xff)
 				break;
-			release_region(inta_addr[i], 0x8);
+			release_region(inta_addr[i], 32);
 		}
 	}
 	if (i >= 5) {
@@ -2635,7 +2633,7 @@ static int __devinit sio_ite_8872_probe(struct pci_dev *pdev, int autoirq,
 	/*
 	 * Release the resource so that parport_pc_probe_port can get it.
 	 */
-	release_resource(base_res);
+	release_region(inta_addr[i], 32);
 	if (parport_pc_probe_port(ite8872_lpt, ite8872_lpthi,
 				   irq, PARPORT_DMA_NONE, &pdev->dev, 0)) {
 		printk(KERN_INFO

drivers/tty/n_gsm.c

@@ -1658,8 +1658,12 @@ static void gsm_queue(struct gsm_mux *gsm)
 
 	if ((gsm->control & ~PF) == UI)
 		gsm->fcs = gsm_fcs_add_block(gsm->fcs, gsm->buf, gsm->len);
-	/* generate final CRC with received FCS */
-	gsm->fcs = gsm_fcs_add(gsm->fcs, gsm->received_fcs);
+	if (gsm->encoding == 0){
+		/* WARNING: gsm->received_fcs is used for gsm->encoding = 0 only.
+		            In this case it contain the last piece of data
+		            required to generate final CRC */
+		gsm->fcs = gsm_fcs_add(gsm->fcs, gsm->received_fcs);
+	}
 	if (gsm->fcs != GOOD_FCS) {
 		gsm->bad_fcs++;
 		if (debug & 4)

drivers/tty/serial/imx.c

@@ -382,12 +382,13 @@ static void imx_start_tx(struct uart_port *port)
 static irqreturn_t imx_rtsint(int irq, void *dev_id)
 {
 	struct imx_port *sport = dev_id;
-	unsigned int val = readl(sport->port.membase + USR1) & USR1_RTSS;
+	unsigned int val;
 	unsigned long flags;
 
 	spin_lock_irqsave(&sport->port.lock, flags);
 
 	writel(USR1_RTSD, sport->port.membase + USR1);
+	val = readl(sport->port.membase + USR1) & USR1_RTSS;
 	uart_handle_cts_change(&sport->port, !!val);
 	wake_up_interruptible(&sport->port.state->port.delta_msr_wait);