提交 0e2364a7 编写于 作者: T Takashi Iwai 提交者: Jaroslav Kysela

[ALSA] maestro3 - Fix PM support

Modules: Maestro3 driver

Fix PM support on maestro3 driver.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
上级 5809c6c4
...@@ -2546,14 +2546,16 @@ static int snd_m3_free(struct snd_m3 *chip) ...@@ -2546,14 +2546,16 @@ static int snd_m3_free(struct snd_m3 *chip)
* APM support * APM support
*/ */
#ifdef CONFIG_PM #ifdef CONFIG_PM
static int m3_suspend(struct snd_card *card, pm_message_t state) static int m3_suspend(struct pci_dev *pci, pm_message_t state)
{ {
struct snd_m3 *chip = card->pm_private_data; struct snd_card *card = pci_get_drvdata(pci);
struct snd_m3 *chip = card->private_data;
int i, index; int i, index;
if (chip->suspend_mem == NULL) if (chip->suspend_mem == NULL)
return 0; return 0;
snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
snd_pcm_suspend_all(chip->pcm); snd_pcm_suspend_all(chip->pcm);
snd_ac97_suspend(chip->ac97); snd_ac97_suspend(chip->ac97);
...@@ -2574,20 +2576,23 @@ static int m3_suspend(struct snd_card *card, pm_message_t state) ...@@ -2574,20 +2576,23 @@ static int m3_suspend(struct snd_card *card, pm_message_t state)
snd_m3_outw(chip, 0xffff, 0x54); snd_m3_outw(chip, 0xffff, 0x54);
snd_m3_outw(chip, 0xffff, 0x56); snd_m3_outw(chip, 0xffff, 0x56);
pci_disable_device(chip->pci); pci_disable_device(pci);
pci_save_state(pci);
return 0; return 0;
} }
static int m3_resume(struct snd_card *card) static int m3_resume(struct pci_dev *pci)
{ {
struct snd_m3 *chip = card->pm_private_data; struct snd_card *card = pci_get_drvdata(pci);
struct snd_m3 *chip = card->private_data;
int i, index; int i, index;
if (chip->suspend_mem == NULL) if (chip->suspend_mem == NULL)
return 0; return 0;
pci_enable_device(chip->pci); pci_restore_state(pci);
pci_set_master(chip->pci); pci_enable_device(pci);
pci_set_master(pci);
/* first lets just bring everything back. .*/ /* first lets just bring everything back. .*/
snd_m3_outw(chip, 0, 0x54); snd_m3_outw(chip, 0, 0x54);
...@@ -2617,6 +2622,7 @@ static int m3_resume(struct snd_card *card) ...@@ -2617,6 +2622,7 @@ static int m3_resume(struct snd_card *card)
snd_m3_enable_ints(chip); snd_m3_enable_ints(chip);
snd_m3_amp_enable(chip, 1); snd_m3_amp_enable(chip, 1);
snd_power_change_state(card, SNDRV_CTL_POWER_D0);
return 0; return 0;
} }
#endif /* CONFIG_PM */ #endif /* CONFIG_PM */
...@@ -2748,8 +2754,6 @@ snd_m3_create(struct snd_card *card, struct pci_dev *pci, ...@@ -2748,8 +2754,6 @@ snd_m3_create(struct snd_card *card, struct pci_dev *pci,
chip->suspend_mem = vmalloc(sizeof(u16) * (REV_B_CODE_MEMORY_LENGTH + REV_B_DATA_MEMORY_LENGTH)); chip->suspend_mem = vmalloc(sizeof(u16) * (REV_B_CODE_MEMORY_LENGTH + REV_B_DATA_MEMORY_LENGTH));
if (chip->suspend_mem == NULL) if (chip->suspend_mem == NULL)
snd_printk(KERN_WARNING "can't allocate apm buffer\n"); snd_printk(KERN_WARNING "can't allocate apm buffer\n");
else
snd_card_set_pm_callback(card, m3_suspend, m3_resume, chip);
#endif #endif
if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops)) < 0) { if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops)) < 0) {
...@@ -2825,6 +2829,7 @@ snd_m3_probe(struct pci_dev *pci, const struct pci_device_id *pci_id) ...@@ -2825,6 +2829,7 @@ snd_m3_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
snd_card_free(card); snd_card_free(card);
return err; return err;
} }
card->private_data = chip;
sprintf(card->shortname, "ESS %s PCI", card->driver); sprintf(card->shortname, "ESS %s PCI", card->driver);
sprintf(card->longname, "%s at 0x%lx, irq %d", sprintf(card->longname, "%s at 0x%lx, irq %d",
...@@ -2860,7 +2865,10 @@ static struct pci_driver driver = { ...@@ -2860,7 +2865,10 @@ static struct pci_driver driver = {
.id_table = snd_m3_ids, .id_table = snd_m3_ids,
.probe = snd_m3_probe, .probe = snd_m3_probe,
.remove = __devexit_p(snd_m3_remove), .remove = __devexit_p(snd_m3_remove),
SND_PCI_PM_CALLBACKS #ifdef CONFIG_PM
.suspend = m3_suspend,
.resume = m3_resume,
#endif
}; };
static int __init alsa_card_m3_init(void) static int __init alsa_card_m3_init(void)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册