Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
接近 2 年 前同步成功

通知 170
Star 36
Fork 7
cloud-kernel
cloud-kernel
提交 0e0162bb 编写于 作者: A Al Viro
浏览文件
操作

Merge branch 'ovl-fixes' into for-linus 

Backmerge to resolve a conflict in ovl_lookup_real();
"ovl_lookup_real(): use lookup_one_len_unlocked()" instead,
but it was too late in the cycle to rebase.
上级 ae05327a 38b78a5f
展开全部 隐藏空白更改
内联 并排
Showing with 7529 addition and 4038 deletion
.mailmap
浏览文件 @ 0e0162bb
......@@ -48,6 +48,9 @@ Felix Kuhling <fxkuehl@gmx.de>
Felix Moeller <felix@derklecks.de>
Filipe Lautert <filipe@icewall.org>
Franck Bui-Huu <vagabon.xyz@gmail.com>
Frank Rowand <frowand.list@gmail.com> <frowand@mvista.com>
Frank Rowand <frowand.list@gmail.com> <frank.rowand@am.sony.com>
Frank Rowand <frowand.list@gmail.com> <frank.rowand@sonymobile.com>
Frank Zago <fzago@systemfabricworks.com>
Greg Kroah-Hartman <greg@echidna.(none)>
Greg Kroah-Hartman <gregkh@suse.de>
......@@ -66,6 +69,7 @@ Jean Tourrilhes <jt@hpl.hp.com>
Jeff Garzik <jgarzik@pretzel.yyz.us>
Jens Axboe <axboe@suse.de>
Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
John Stultz <johnstul@us.ibm.com>
<josh@joshtriplett.org> <josh@freedesktop.org>
<josh@joshtriplett.org> <josh@kernel.org>
......@@ -79,6 +83,7 @@ Kay Sievers <kay.sievers@vrfy.org>
Kenneth W Chen <kenneth.w.chen@intel.com>
Konstantin Khlebnikov <koct9i@gmail.com> <k.khlebnikov@samsung.com>
Koushik <raghavendra.koushik@neterion.com>
Krzysztof Kozlowski <krzk@kernel.org> <k.kozlowski.k@gmail.com>
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Leonid I Ananiev <leonid.i.ananiev@intel.com>
Linas Vepstas <linas@austin.ibm.com>
......
Documentation/devicetree/bindings/arc/archs-pct.txt
浏览文件 @ 0e0162bb
......@@ -2,7 +2,7 @@
The ARC HS can be configured with a pipeline performance monitor for counting
CPU and cache events like cache misses and hits. Like conventional PCT there
are 100+ hardware conditions dynamically mapped to upto 32 counters.
are 100+ hardware conditions dynamically mapped to up to 32 counters.
It also supports overflow interrupts.
Required properties:
......
Documentation/devicetree/bindings/arc/pct.txt
浏览文件 @ 0e0162bb
......@@ -2,7 +2,7 @@
The ARC700 can be configured with a pipeline performance monitor for counting
CPU and cache events like cache misses and hits. Like conventional PCT there
are 100+ hardware conditions dynamically mapped to upto 32 counters
are 100+ hardware conditions dynamically mapped to up to 32 counters
Note that:
* The ARC 700 PCT does not support interrupts; although HW events may be
......
Documentation/devicetree/bindings/arm/cpus.txt
浏览文件 @ 0e0162bb
......@@ -192,7 +192,6 @@ nodes to be present and contain the properties described below.
can be one of:
"allwinner,sun6i-a31"
"allwinner,sun8i-a23"
"arm,psci"
"arm,realview-smp"
"brcm,bcm-nsp-smp"
"brcm,brahma-b15"
......
Documentation/devicetree/bindings/ata/ahci-platform.txt
浏览文件 @ 0e0162bb
......@@ -32,6 +32,10 @@ Optional properties:
- target-supply : regulator for SATA target power
- phys : reference to the SATA PHY node
- phy-names : must be "sata-phy"
- ports-implemented : Mask that indicates which ports that the HBA supports
are available for software to use. Useful if PORTS_IMPL
is not programmed by the BIOS, which is true with
some embedded SOC's.
Required properties when using sub-nodes:
- #address-cells : number of cells to encode an address
......
Documentation/devicetree/bindings/i2c/i2c-rk3x.txt
浏览文件 @ 0e0162bb
......@@ -6,8 +6,8 @@ RK3xxx SoCs.
Required properties :
- reg : Offset and length of the register set for the device
- compatible : should be "rockchip,rk3066-i2c", "rockchip,rk3188-i2c" or
"rockchip,rk3288-i2c".
- compatible : should be "rockchip,rk3066-i2c", "rockchip,rk3188-i2c",
"rockchip,rk3228-i2c" or "rockchip,rk3288-i2c".
- interrupts : interrupt number
- clocks : parent clock
......
Documentation/devicetree/bindings/net/cpsw.txt
浏览文件 @ 0e0162bb
......@@ -45,13 +45,13 @@ Required properties:
Optional properties:
- dual_emac_res_vlan : Specifies VID to be used to segregate the ports
- mac-address : See ethernet.txt file in the same directory
- phy_id : Specifies slave phy id
- phy_id : Specifies slave phy id (deprecated, use phy-handle)
- phy-handle : See ethernet.txt file in the same directory
Slave sub-nodes:
- fixed-link : See fixed-link.txt file in the same directory
Either the property phy_id, or the sub-node
fixed-link can be specified
Note: Exactly one of phy_id, phy-handle, or fixed-link must be specified.
Note: "ti,hwmods" field is used to fetch the base address and irq
resources from TI, omap hwmod data base during device registration.
......
Documentation/devicetree/bindings/net/mediatek-net.txt
浏览文件 @ 0e0162bb
......@@ -9,7 +9,8 @@ have dual GMAC each represented by a child node..
Required properties:
- compatible: Should be "mediatek,mt7623-eth"
- reg: Address and length of the register set for the device
- interrupts: Should contain the frame engines interrupt
- interrupts: Should contain the three frame engines interrupts in numeric
order. These are fe_int0, fe_int1 and fe_int2.
- clocks: the clock used by the core
- clock-names: the names of the clock listed in the clocks property. These are
"ethif", "esw", "gp2", "gp1"
......@@ -42,7 +43,9 @@ eth: ethernet@1b100000 {
<&ethsys CLK_ETHSYS_GP2>,
<&ethsys CLK_ETHSYS_GP1>;
clock-names = "ethif", "esw", "gp2", "gp1";
interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>;
interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW
GIC_SPI 199 IRQ_TYPE_LEVEL_LOW
GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
resets = <&ethsys MT2701_ETHSYS_ETH_RST>;
reset-names = "eth";
......
Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
浏览文件 @ 0e0162bb
......@@ -8,15 +8,19 @@ Required properties:
of memory mapped region.
- clock-names: from common clock binding:
Required elements: "24m"
- rockchip,grf: phandle to the syscon managing the "general register files"
- #phy-cells : from the generic PHY bindings, must be 0;
Example:
edp_phy: edp-phy {
compatible = "rockchip,rk3288-dp-phy";
rockchip,grf = <&grf>;
clocks = <&cru SCLK_EDP_24M>;
clock-names = "24m";
#phy-cells = <0>;
grf: syscon@ff770000 {
compatible = "rockchip,rk3288-grf", "syscon", "simple-mfd";
...
edp_phy: edp-phy {
compatible = "rockchip,rk3288-dp-phy";
clocks = <&cru SCLK_EDP_24M>;
clock-names = "24m";
#phy-cells = <0>;
};
};
Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
浏览文件 @ 0e0162bb
......@@ -3,17 +3,23 @@ Rockchip EMMC PHY
Required properties:
- compatible: rockchip,rk3399-emmc-phy
- rockchip,grf : phandle to the syscon managing the "general
register files"
- #phy-cells: must be 0
- reg: PHY configure reg address offset in "general
- reg: PHY register address offset and length in "general
register files"
Example:
emmcphy: phy {
compatible = "rockchip,rk3399-emmc-phy";
rockchip,grf = <&grf>;
reg = <0xf780>;
#phy-cells = <0>;
grf: syscon@ff770000 {
compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
#address-cells = <1>;
#size-cells = <1>;
...
emmcphy: phy@f780 {
compatible = "rockchip,rk3399-emmc-phy";
reg = <0xf780 0x20>;
#phy-cells = <0>;
};
};
Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
浏览文件 @ 0e0162bb
== Amlogic Meson pinmux controller ==
Required properties for the root node:
- compatible: "amlogic,meson8-pinctrl" or "amlogic,meson8b-pinctrl"
- compatible: one of "amlogic,meson8-cbus-pinctrl"
"amlogic,meson8b-cbus-pinctrl"
"amlogic,meson8-aobus-pinctrl"
"amlogic,meson8b-aobus-pinctrl"
- reg: address and size of registers controlling irq functionality
=== GPIO sub-nodes ===
The 2 power domains of the controller (regular and always-on) are
represented as sub-nodes and each of them acts as a GPIO controller.
The GPIO bank for the controller is represented as a sub-node and it acts as a
GPIO controller.
Required properties for sub-nodes are:
- reg: should contain address and size for mux, pull-enable, pull and
......@@ -18,10 +21,6 @@ Required properties for sub-nodes are:
- gpio-controller: identifies the node as a gpio controller
- #gpio-cells: must be 2
Valid sub-node names are:
- "banks" for the regular domain
- "ao-bank" for the always-on domain
=== Other sub-nodes ===
Child nodes without the "gpio-controller" represent some desired
......@@ -45,7 +44,7 @@ pinctrl-bindings.txt
=== Example ===
pinctrl: pinctrl@c1109880 {
compatible = "amlogic,meson8-pinctrl";
compatible = "amlogic,meson8-cbus-pinctrl";
reg = <0xc1109880 0x10>;
#address-cells = <1>;
#size-cells = <1>;
......@@ -61,15 +60,6 @@ pinctrl-bindings.txt
#gpio-cells = <2>;
};
gpio_ao: ao-bank@c1108030 {
reg = <0xc8100014 0x4>,
<0xc810002c 0x4>,
<0xc8100024 0x8>;
reg-names = "mux", "pull", "gpio";
gpio-controller;
#gpio-cells = <2>;
};
nand {
mux {
groups = "nand_io", "nand_io_ce0", "nand_io_ce1",
......@@ -79,18 +69,4 @@ pinctrl-bindings.txt
function = "nand";
};
};
uart_ao_a {
mux {
groups = "uart_tx_ao_a", "uart_rx_ao_a",
"uart_cts_ao_a", "uart_rts_ao_a";
function = "uart_ao";
};
conf {
pins = "GPIOAO_0", "GPIOAO_1",
"GPIOAO_2", "GPIOAO_3";
bias-disable;
};
};
};
Documentation/devicetree/bindings/rtc/s3c-rtc.txt
浏览文件 @ 0e0162bb
......@@ -15,9 +15,10 @@ Required properties:
is the rtc tick interrupt. The number of cells representing a interrupt
depends on the parent interrupt controller.
- clocks: Must contain a list of phandle and clock specifier for the rtc
and source clocks.
- clock-names: Must contain "rtc" and "rtc_src" entries sorted in the
same order as the clocks property.
clock and in the case of a s3c6410 compatible controller, also
a source clock.
- clock-names: Must contain "rtc" and for a s3c6410 compatible controller,
a "rtc_src" sorted in the same order as the clocks property.
Example:
......
Documentation/input/event-codes.txt
浏览文件 @ 0e0162bb
......@@ -173,6 +173,10 @@ A few EV_ABS codes have special meanings:
proximity of the device and while the value of the BTN_TOUCH code is 0. If
the input device may be used freely in three dimensions, consider ABS_Z
instead.
- BTN_TOOL_<name> should be set to 1 when the tool comes into detectable
proximity and set to 0 when the tool leaves detectable proximity.
BTN_TOOL_<name> signals the type of tool that is currently detected by the
hardware and is otherwise independent of ABS_DISTANCE and/or BTN_TOUCH.
* ABS_MT_<name>:
- Used to describe multitouch input events. Please see
......
Documentation/kernel-parameters.txt
浏览文件 @ 0e0162bb
......@@ -4077,6 +4077,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
sector if the number is odd);
i = IGNORE_DEVICE (don't bind to this
device);
j = NO_REPORT_LUNS (don't use report luns
command, uas only);
l = NOT_LOCKABLE (don't try to lock and
unlock ejectable media);
m = MAX_SECTORS_64 (don't transfer more
......
Documentation/networking/altera_tse.txt
浏览文件 @ 0e0162bb
......@@ -6,7 +6,7 @@ This is the driver for the Altera Triple-Speed Ethernet (TSE) controllers
using the SGDMA and MSGDMA soft DMA IP components. The driver uses the
platform bus to obtain component resources. The designs used to test this
driver were built for a Cyclone(R) V SOC FPGA board, a Cyclone(R) V FPGA board,
and tested with ARM and NIOS processor hosts seperately. The anticipated use
and tested with ARM and NIOS processor hosts separately. The anticipated use
cases are simple communications between an embedded system and an external peer
for status and simple configuration of the embedded system.
......@@ -65,14 +65,14 @@ Driver parameters can be also passed in command line by using:
4.1) Transmit process
When the driver's transmit routine is called by the kernel, it sets up a
transmit descriptor by calling the underlying DMA transmit routine (SGDMA or
MSGDMA), and initites a transmit operation. Once the transmit is complete, an
MSGDMA), and initiates a transmit operation. Once the transmit is complete, an
interrupt is driven by the transmit DMA logic. The driver handles the transmit
completion in the context of the interrupt handling chain by recycling
resource required to send and track the requested transmit operation.
4.2) Receive process
The driver will post receive buffers to the receive DMA logic during driver
intialization. Receive buffers may or may not be queued depending upon the
initialization. Receive buffers may or may not be queued depending upon the
underlying DMA logic (MSGDMA is able queue receive buffers, SGDMA is not able
to queue receive buffers to the SGDMA receive logic). When a packet is
received, the DMA logic generates an interrupt. The driver handles a receive
......
Documentation/networking/ipvlan.txt
浏览文件 @ 0e0162bb
......@@ -8,7 +8,7 @@ Initial Release:
This is conceptually very similar to the macvlan driver with one major
exception of using L3 for mux-ing /demux-ing among slaves. This property makes
the master device share the L2 with it's slave devices. I have developed this
driver in conjuntion with network namespaces and not sure if there is use case
driver in conjunction with network namespaces and not sure if there is use case
outside of it.
......@@ -42,7 +42,7 @@ out. In this mode the slaves will RX/TX multicast and broadcast (if applicable)
as well.
4.2 L3 mode:
In this mode TX processing upto L3 happens on the stack instance attached
In this mode TX processing up to L3 happens on the stack instance attached
to the slave device and packets are switched to the stack instance of the
master device for the L2 processing and routing from that instance will be
used before packets are queued on the outbound device. In this mode the slaves
......@@ -56,7 +56,7 @@ situations defines your use case then you can choose to use ipvlan -
(a) The Linux host that is connected to the external switch / router has
policy configured that allows only one mac per port.
(b) No of virtual devices created on a master exceed the mac capacity and
puts the NIC in promiscous mode and degraded performance is a concern.
puts the NIC in promiscuous mode and degraded performance is a concern.
(c) If the slave device is to be put into the hostile / untrusted network
namespace where L2 on the slave could be changed / misused.
......
Documentation/networking/pktgen.txt
浏览文件 @ 0e0162bb
......@@ -67,12 +67,12 @@ The two basic thread commands are:
* add_device DEVICE@NAME -- adds a single device
* rem_device_all -- remove all associated devices
When adding a device to a thread, a corrosponding procfile is created
When adding a device to a thread, a corresponding procfile is created
which is used for configuring this device. Thus, device names need to
be unique.
To support adding the same device to multiple threads, which is useful
with multi queue NICs, a the device naming scheme is extended with "@":
with multi queue NICs, the device naming scheme is extended with "@":
device@something
The part after "@" can be anything, but it is custom to use the thread
......@@ -221,7 +221,7 @@ Sample scripts
A collection of tutorial scripts and helpers for pktgen is in the
samples/pktgen directory. The helper parameters.sh file support easy
and consistant parameter parsing across the sample scripts.
and consistent parameter parsing across the sample scripts.
Usage example and help:
./pktgen_sample01_simple.sh -i eth4 -m 00:1B:21:3C:9D:F8 -d 192.168.8.2
......
Documentation/networking/vrf.txt
浏览文件 @ 0e0162bb
......@@ -41,7 +41,7 @@ using an rx_handler which gives the impression that packets flow through
the VRF device. Similarly on egress routing rules are used to send packets
to the VRF device driver before getting sent out the actual interface. This
allows tcpdump on a VRF device to capture all packets into and out of the
VRF as a whole.[1] Similiarly, netfilter [2] and tc rules can be applied
VRF as a whole.[1] Similarly, netfilter [2] and tc rules can be applied
using the VRF device to specify rules that apply to the VRF domain as a whole.
[1] Packets in the forwarded state do not flow through the device, so those
......
Documentation/networking/xfrm_sync.txt
浏览文件 @ 0e0162bb
......@@ -4,7 +4,7 @@ Krisztian <hidden@balabit.hu> and others and additional patches
from Jamal <hadi@cyberus.ca>.
The end goal for syncing is to be able to insert attributes + generate
events so that the an SA can be safely moved from one machine to another
events so that the SA can be safely moved from one machine to another
for HA purposes.
The idea is to synchronize the SA so that the takeover machine can do
the processing of the SA as accurate as possible if it has access to it.
......@@ -13,7 +13,7 @@ We already have the ability to generate SA add/del/upd events.
These patches add ability to sync and have accurate lifetime byte (to
ensure proper decay of SAs) and replay counters to avoid replay attacks
with as minimal loss at failover time.
This way a backup stays as closely uptodate as an active member.
This way a backup stays as closely up-to-date as an active member.
Because the above items change for every packet the SA receives,
it is possible for a lot of the events to be generated.
......@@ -163,7 +163,7 @@ If you have an SA that is getting hit by traffic in bursts such that
there is a period where the timer threshold expires with no packets
seen, then an odd behavior is seen as follows:
The first packet arrival after a timer expiry will trigger a timeout
aevent; i.e we dont wait for a timeout period or a packet threshold
event; i.e we don't wait for a timeout period or a packet threshold
to be reached. This is done for simplicity and efficiency reasons.
-JHS
Documentation/sysctl/vm.txt
浏览文件 @ 0e0162bb
......@@ -581,15 +581,16 @@ Specify "[Nn]ode" for node order
"Zone Order" orders the zonelists by zone type, then by node within each
zone. Specify "[Zz]one" for zone order.
Specify "[Dd]efault" to request automatic configuration. Autoconfiguration
will select "node" order in following case.
(1) if the DMA zone does not exist or
(2) if the DMA zone comprises greater than 50% of the available memory or
(3) if any node's DMA zone comprises greater than 70% of its local memory and
the amount of local memory is big enough.
Otherwise, "zone" order will be selected. Default order is recommended unless
this is causing problems for your system/application.
Specify "[Dd]efault" to request automatic configuration.
On 32-bit, the Normal zone needs to be preserved for allocations accessible
by the kernel, so "zone" order will be selected.
On 64-bit, devices that require DMA32/DMA are relatively rare, so "node"
order will be selected.
Default order is recommended unless this is causing problems for your
system/application.
==============================================================
......
Documentation/usb/gadget_multi.txt
浏览文件 @ 0e0162bb
......@@ -43,7 +43,7 @@ For the gadget two work under Windows two conditions have to be met:
First of all, Windows need to detect the gadget as an USB composite
gadget which on its own have some conditions[4]. If they are met,
Windows lets USB Generic Parent Driver[5] handle the device which then
tries to much drivers for each individual interface (sort of, don't
tries to match drivers for each individual interface (sort of, don't
get into too many details).
The good news is: you do not have to worry about most of the
......
Documentation/x86/protection-keys.txt 0 → 100644
浏览文件 @ 0e0162bb
Memory Protection Keys for Userspace (PKU aka PKEYs) is a CPU feature
which will be found on future Intel CPUs.
Memory Protection Keys provides a mechanism for enforcing page-based
protections, but without requiring modification of the page tables
when an application changes protection domains. It works by
dedicating 4 previously ignored bits in each page table entry to a
"protection key", giving 16 possible keys.
There is also a new user-accessible register (PKRU) with two separate
bits (Access Disable and Write Disable) for each key. Being a CPU
register, PKRU is inherently thread-local, potentially giving each
thread a different set of protections from every other thread.
There are two new instructions (RDPKRU/WRPKRU) for reading and writing
to the new register. The feature is only available in 64-bit mode,
even though there is theoretically space in the PAE PTEs. These
permissions are enforced on data access only and have no effect on
instruction fetches.
=========================== Config Option ===========================
This config option adds approximately 1.5kb of text. and 50 bytes of
data to the executable. A workload which does large O_DIRECT reads
of holes in XFS files was run to exercise get_user_pages_fast(). No
performance delta was observed with the config option
enabled or disabled.
Documentation/x86/x86_64/mm.txt
浏览文件 @ 0e0162bb
......@@ -19,7 +19,7 @@ ffffff0000000000 - ffffff7fffffffff (=39 bits) %esp fixup stacks
ffffffef00000000 - ffffffff00000000 (=64 GB) EFI region mapping space
... unused hole ...
ffffffff80000000 - ffffffffa0000000 (=512 MB) kernel text mapping, from phys 0
ffffffffa0000000 - ffffffffff5fffff (=1525 MB) module mapping space
ffffffffa0000000 - ffffffffff5fffff (=1526 MB) module mapping space
ffffffffff600000 - ffffffffffdfffff (=8 MB) vsyscalls
ffffffffffe00000 - ffffffffffffffff (=2 MB) unused hole
......@@ -31,8 +31,8 @@ vmalloc space is lazily synchronized into the different PML4 pages of
the processes using the page fault handler, with init_level4_pgt as
reference.
Current X86-64 implementations only support 40 bits of address space,
but we support up to 46 bits. This expands into MBZ space in the page tables.
Current X86-64 implementations support up to 46 bits of address space (64 TB),
which is our current limit. This expands into MBZ space in the page tables.
We map EFI runtime services in the 'efi_pgd' PGD in a 64Gb large virtual
memory window (this size is arbitrary, it can be raised later if needed).
......
MAINTAINERS
浏览文件 @ 0e0162bb
......@@ -872,9 +872,9 @@ F: drivers/perf/arm_pmu.c
F: include/linux/perf/arm_pmu.h
ARM PORT
M: Russell King <linux@arm.linux.org.uk>
M: Russell King <linux@armlinux.org.uk>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.arm.linux.org.uk/
W: http://www.armlinux.org.uk/
S: Maintained
F: arch/arm/
......@@ -886,35 +886,35 @@ F: arch/arm/plat-*/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git
ARM PRIMECELL AACI PL041 DRIVER
M: Russell King <linux@arm.linux.org.uk>
M: Russell King <linux@armlinux.org.uk>
S: Maintained
F: sound/arm/aaci.*
ARM PRIMECELL CLCD PL110 DRIVER
M: Russell King <linux@arm.linux.org.uk>
M: Russell King <linux@armlinux.org.uk>
S: Maintained
F: drivers/video/fbdev/amba-clcd.*
ARM PRIMECELL KMI PL050 DRIVER
M: Russell King <linux@arm.linux.org.uk>
M: Russell King <linux@armlinux.org.uk>
S: Maintained
F: drivers/input/serio/ambakmi.*
F: include/linux/amba/kmi.h
ARM PRIMECELL MMCI PL180/1 DRIVER
M: Russell King <linux@arm.linux.org.uk>
M: Russell King <linux@armlinux.org.uk>
S: Maintained
F: drivers/mmc/host/mmci.*
F: include/linux/amba/mmci.h
ARM PRIMECELL UART PL010 AND PL011 DRIVERS
M: Russell King <linux@arm.linux.org.uk>
M: Russell King <linux@armlinux.org.uk>
S: Maintained
F: drivers/tty/serial/amba-pl01*.c
F: include/linux/amba/serial.h
ARM PRIMECELL BUS SUPPORT
M: Russell King <linux@arm.linux.org.uk>
M: Russell King <linux@armlinux.org.uk>
S: Maintained
F: drivers/amba/
F: include/linux/amba/bus.h
......@@ -1036,7 +1036,7 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
ARM/CLKDEV SUPPORT
M: Russell King <linux@arm.linux.org.uk>
M: Russell King <linux@armlinux.org.uk>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/include/asm/clkdev.h
......@@ -1093,9 +1093,9 @@ F: arch/arm/boot/dts/cx92755*
N: digicolor
ARM/EBSA110 MACHINE SUPPORT
M: Russell King <linux@arm.linux.org.uk>
M: Russell King <linux@armlinux.org.uk>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.arm.linux.org.uk/
W: http://www.armlinux.org.uk/
S: Maintained
F: arch/arm/mach-ebsa110/
F: drivers/net/ethernet/amd/am79c961a.*
......@@ -1124,9 +1124,9 @@ T: git git://git.berlios.de/gemini-board
F: arch/arm/mm/*-fa*
ARM/FOOTBRIDGE ARCHITECTURE
M: Russell King <linux@arm.linux.org.uk>
M: Russell King <linux@armlinux.org.uk>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.arm.linux.org.uk/
W: http://www.armlinux.org.uk/
S: Maintained
F: arch/arm/include/asm/hardware/dec21285.h
F: arch/arm/mach-footbridge/
......@@ -1457,7 +1457,7 @@ S: Maintained
ARM/PT DIGITAL BOARD PORT
M: Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.arm.linux.org.uk/
W: http://www.armlinux.org.uk/
S: Maintained
ARM/QUALCOMM SUPPORT
......@@ -1493,9 +1493,9 @@ S: Supported
F: arch/arm64/boot/dts/renesas/
ARM/RISCPC ARCHITECTURE
M: Russell King <linux@arm.linux.org.uk>
M: Russell King <linux@armlinux.org.uk>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.arm.linux.org.uk/
W: http://www.armlinux.org.uk/
S: Maintained
F: arch/arm/include/asm/hardware/entry-macro-iomd.S
F: arch/arm/include/asm/hardware/ioc.h
......@@ -1773,9 +1773,9 @@ F: drivers/clk/versatile/clk-vexpress-osc.c
F: drivers/clocksource/versatile.c
ARM/VFP SUPPORT
M: Russell King <linux@arm.linux.org.uk>
M: Russell King <linux@armlinux.org.uk>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.arm.linux.org.uk/
W: http://www.armlinux.org.uk/
S: Maintained
F: arch/arm/vfp/
......@@ -2921,7 +2921,7 @@ F: mm/cleancache.c
F: include/linux/cleancache.h
CLK API
M: Russell King <linux@arm.linux.org.uk>
M: Russell King <linux@armlinux.org.uk>
L: linux-clk@vger.kernel.org
S: Maintained
F: include/linux/clk.h
......@@ -3354,9 +3354,9 @@ S: Supported
F: drivers/net/ethernet/stmicro/stmmac/
CYBERPRO FB DRIVER
M: Russell King <linux@arm.linux.org.uk>
M: Russell King <linux@armlinux.org.uk>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.arm.linux.org.uk/
W: http://www.armlinux.org.uk/
S: Maintained
F: drivers/video/fbdev/cyber2000fb.*
......@@ -3881,7 +3881,7 @@ F: Documentation/devicetree/bindings/display/st,stih4xx.txt
DRM DRIVERS FOR VIVANTE GPU IP
M: Lucas Stach <l.stach@pengutronix.de>
R: Russell King <linux+etnaviv@arm.linux.org.uk>
R: Russell King <linux+etnaviv@armlinux.org.uk>
R: Christian Gmeiner <christian.gmeiner@gmail.com>
L: dri-devel@lists.freedesktop.org
S: Maintained
......@@ -4223,8 +4223,8 @@ F: Documentation/efi-stub.txt
F: arch/ia64/kernel/efi.c
F: arch/x86/boot/compressed/eboot.[ch]
F: arch/x86/include/asm/efi.h
F: arch/x86/platform/efi/*
F: drivers/firmware/efi/*
F: arch/x86/platform/efi/
F: drivers/firmware/efi/
F: include/linux/efi*.h
EFI VARIABLE FILESYSTEM
......@@ -4744,7 +4744,7 @@ F: drivers/platform/x86/fujitsu-tablet.c
FUSE: FILESYSTEM IN USERSPACE
M: Miklos Szeredi <miklos@szeredi.hu>
L: fuse-devel@lists.sourceforge.net
L: linux-fsdevel@vger.kernel.org
W: http://fuse.sourceforge.net/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse.git
S: Maintained
......@@ -4903,7 +4903,7 @@ F: net/ipv4/gre_offload.c
F: include/net/gre.h
GRETH 10/100/1G Ethernet MAC device driver
M: Kristoffer Glembo <kristoffer@gaisler.com>
M: Andreas Larsson <andreas@gaisler.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ethernet/aeroflex/
......@@ -6027,7 +6027,7 @@ F: include/scsi/*iscsi*
ISCSI EXTENSIONS FOR RDMA (ISER) INITIATOR
M: Or Gerlitz <ogerlitz@mellanox.com>
M: Sagi Grimberg <sagig@mellanox.com>
M: Sagi Grimberg <sagi@grimberg.me>
M: Roi Dayan <roid@mellanox.com>
L: linux-rdma@vger.kernel.org
S: Supported
......@@ -6037,7 +6037,7 @@ Q: http://patchwork.kernel.org/project/linux-rdma/list/
F: drivers/infiniband/ulp/iser/
ISCSI EXTENSIONS FOR RDMA (ISER) TARGET
M: Sagi Grimberg <sagig@mellanox.com>
M: Sagi Grimberg <sagi@grimberg.me>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending.git master
L: linux-rdma@vger.kernel.org
L: target-devel@vger.kernel.org
......@@ -6252,8 +6252,8 @@ S: Maintained
F: tools/testing/selftests
KERNEL VIRTUAL MACHINE (KVM)
M: Gleb Natapov <gleb@kernel.org>
M: Paolo Bonzini <pbonzini@redhat.com>
M: Radim Krčmář <rkrcmar@redhat.com>
L: kvm@vger.kernel.org
W: http://www.linux-kvm.org
T: git git://git.kernel.org/pub/scm/virt/kvm/kvm.git
......@@ -6400,7 +6400,7 @@ F: mm/kmemleak.c
F: mm/kmemleak-test.c
KPROBES
M: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
M: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
M: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
M: "David S. Miller" <davem@davemloft.net>
M: Masami Hiramatsu <mhiramat@kernel.org>
......@@ -6905,7 +6905,7 @@ L: linux-man@vger.kernel.org
S: Maintained
MARVELL ARMADA DRM SUPPORT
M: Russell King <rmk+kernel@arm.linux.org.uk>
M: Russell King <rmk+kernel@armlinux.org.uk>
S: Maintained
F: drivers/gpu/drm/armada/
......@@ -7905,7 +7905,7 @@ S: Supported
F: drivers/nfc/nxp-nci
NXP TDA998X DRM DRIVER
M: Russell King <rmk+kernel@arm.linux.org.uk>
M: Russell King <rmk+kernel@armlinux.org.uk>
S: Supported
F: drivers/gpu/drm/i2c/tda998x_drv.c
F: include/drm/i2c/tda998x.h
......@@ -7978,7 +7978,7 @@ F: arch/arm/*omap*/*pm*
F: drivers/cpufreq/omap-cpufreq.c
OMAP POWERDOMAIN SOC ADAPTATION LAYER SUPPORT
M: Rajendra Nayak <rnayak@ti.com>
M: Rajendra Nayak <rnayak@codeaurora.org>
M: Paul Walmsley <paul@pwsan.com>
L: linux-omap@vger.kernel.org
S: Maintained
......@@ -10014,7 +10014,8 @@ F: drivers/infiniband/hw/ocrdma/
SFC NETWORK DRIVER
M: Solarflare linux maintainers <linux-net-drivers@solarflare.com>
M: Shradha Shah <sshah@solarflare.com>
M: Edward Cree <ecree@solarflare.com>
M: Bert Kenward <bkenward@solarflare.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/ethernet/sfc/
......@@ -11071,6 +11072,15 @@ S: Maintained
F: drivers/clk/ti/
F: include/linux/clk/ti.h
TI ETHERNET SWITCH DRIVER (CPSW)
M: Mugunthan V N <mugunthanvnm@ti.com>
R: Grygorii Strashko <grygorii.strashko@ti.com>
L: linux-omap@vger.kernel.org
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ethernet/ti/cpsw*
F: drivers/net/ethernet/ti/davinci*
TI FLASH MEDIA INTERFACE DRIVER
M: Alex Dubov <oakad@yahoo.com>
S: Maintained
......
Makefile
浏览文件 @ 0e0162bb
VERSION = 4
PATCHLEVEL = 6
SUBLEVEL = 0
EXTRAVERSION = -rc3
NAME = Blurry Fish Butt
EXTRAVERSION = -rc7
NAME = Charred Weasel
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
......@@ -1008,7 +1008,8 @@ prepare0: archprepare FORCE
prepare: prepare0 prepare-objtool
ifdef CONFIG_STACK_VALIDATION
has_libelf := $(shell echo "int main() {}" | $(HOSTCC) -xc -o /dev/null -lelf - &> /dev/null && echo 1 || echo 0)
has_libelf := $(call try-run,\
echo "int main() {}" | $(HOSTCC) -xc -o /dev/null -lelf -,1,0)
ifeq ($(has_libelf),1)
objtool_target := tools/objtool FORCE
else
......
arch/arc/Kconfig
浏览文件 @ 0e0162bb
......@@ -35,8 +35,10 @@ config ARC
select NO_BOOTMEM
select OF
select OF_EARLY_FLATTREE
select OF_RESERVED_MEM
select PERF_USE_VMALLOC
select HAVE_DEBUG_STACKOVERFLOW
select HAVE_GENERIC_DMA_COHERENT
config MIGHT_HAVE_PCI
bool
......@@ -56,6 +58,9 @@ config GENERIC_CSUM
config RWSEM_GENERIC_SPINLOCK
def_bool y
config ARCH_DISCONTIGMEM_ENABLE
def_bool y
config ARCH_FLATMEM_ENABLE
def_bool y
......@@ -345,6 +350,15 @@ config ARC_HUGEPAGE_16M
endchoice
config NODES_SHIFT
int "Maximum NUMA Nodes (as a power of 2)"
default "1" if !DISCONTIGMEM
default "2" if DISCONTIGMEM
depends on NEED_MULTIPLE_NODES
---help---
Accessing memory beyond 1GB (with or w/o PAE) requires 2 memory
zones.
if ISA_ARCOMPACT
config ARC_COMPACT_IRQ_LEVELS
......@@ -453,6 +467,7 @@ config LINUX_LINK_BASE
config HIGHMEM
bool "High Memory Support"
select DISCONTIGMEM
help
With ARC 2G:2G address split, only upper 2G is directly addressable by
kernel. Enable this to potentially allow access to rest of 2G and PAE
......@@ -593,7 +608,6 @@ config PCI_SYSCALL
def_bool PCI
source "drivers/pci/Kconfig"
source "drivers/pci/pcie/Kconfig"
endmenu
......
arch/arc/boot/dts/axs10x_mb.dtsi
浏览文件 @ 0e0162bb
......@@ -47,14 +47,6 @@
clocks = <&apbclk>;
clock-names = "stmmaceth";
max-speed = <100>;
mdio0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dwmac-mdio";
phy1: ethernet-phy@1 {
reg = <1>;
};
};
};
ehci@0x40000 {
......
arch/arc/configs/axs103_defconfig
浏览文件 @ 0e0162bb
......@@ -42,6 +42,7 @@ CONFIG_DEVTMPFS=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
......
arch/arc/configs/axs103_smp_defconfig
浏览文件 @ 0e0162bb
......@@ -43,6 +43,7 @@ CONFIG_DEVTMPFS=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
......
arch/arc/include/asm/fb.h 0 → 100644
浏览文件 @ 0e0162bb
#ifndef _ASM_FB_H_
#define _ASM_FB_H_
#include <linux/fb.h>
#include <linux/fs.h>
#include <asm/page.h>
static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
unsigned long off)
{
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
}
static inline int fb_is_primary_device(struct fb_info *info)
{
return 0;
}
#endif /* _ASM_FB_H_ */
arch/arc/include/asm/io.h
浏览文件 @ 0e0162bb
......@@ -13,6 +13,15 @@
#include <asm/byteorder.h>
#include <asm/page.h>
#ifdef CONFIG_ISA_ARCV2
#include <asm/barrier.h>
#define __iormb() rmb()
#define __iowmb() wmb()
#else
#define __iormb() do { } while (0)
#define __iowmb() do { } while (0)
#endif
extern void __iomem *ioremap(phys_addr_t paddr, unsigned long size);
extern void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
unsigned long flags);
......@@ -31,6 +40,15 @@ extern void iounmap(const void __iomem *addr);
#define ioremap_wc(phy, sz) ioremap(phy, sz)
#define ioremap_wt(phy, sz) ioremap(phy, sz)
/*
* io{read,write}{16,32}be() macros
*/
#define ioread16be(p) ({ u16 __v = be16_to_cpu((__force __be16)__raw_readw(p)); __iormb(); __v; })
#define ioread32be(p) ({ u32 __v = be32_to_cpu((__force __be32)__raw_readl(p)); __iormb(); __v; })
#define iowrite16be(v,p) ({ __iowmb(); __raw_writew((__force u16)cpu_to_be16(v), p); })
#define iowrite32be(v,p) ({ __iowmb(); __raw_writel((__force u32)cpu_to_be32(v), p); })
/* Change struct page to physical address */
#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
......@@ -108,15 +126,6 @@ static inline void __raw_writel(u32 w, volatile void __iomem *addr)
}
#ifdef CONFIG_ISA_ARCV2
#include <asm/barrier.h>
#define __iormb() rmb()
#define __iowmb() wmb()
#else
#define __iormb() do { } while (0)
#define __iowmb() do { } while (0)
#endif
/*
* MMIO can also get buffered/optimized in micro-arch, so barriers needed
* Based on ARM model for the typical use case
......
arch/arc/include/asm/irqflags-arcv2.h
浏览文件 @ 0e0162bb
......@@ -18,6 +18,12 @@
#define STATUS_AD_MASK (1<<STATUS_AD_BIT)
#define STATUS_IE_MASK (1<<STATUS_IE_BIT)
/* status32 Bits as encoded/expected by CLRI/SETI */
#define CLRI_STATUS_IE_BIT 4
#define CLRI_STATUS_E_MASK 0xF
#define CLRI_STATUS_IE_MASK (1 << CLRI_STATUS_IE_BIT)
#define AUX_USER_SP 0x00D
#define AUX_IRQ_CTRL 0x00E
#define AUX_IRQ_ACT 0x043 /* Active Intr across all levels */
......@@ -100,6 +106,13 @@ static inline long arch_local_save_flags(void)
:
: "memory");
/* To be compatible with irq_save()/irq_restore()
* encode the irq bits as expected by CLRI/SETI
* (this was needed to make CONFIG_TRACE_IRQFLAGS work)
*/
temp = (1 << 5) |
((!!(temp & STATUS_IE_MASK)) << CLRI_STATUS_IE_BIT) |
(temp & CLRI_STATUS_E_MASK);
return temp;
}
......@@ -108,7 +121,7 @@ static inline long arch_local_save_flags(void)
*/
static inline int arch_irqs_disabled_flags(unsigned long flags)
{
return !(flags & (STATUS_IE_MASK));
return !(flags & CLRI_STATUS_IE_MASK);
}
static inline int arch_irqs_disabled(void)
......@@ -128,11 +141,32 @@ static inline void arc_softirq_clear(int irq)
#else
#ifdef CONFIG_TRACE_IRQFLAGS
.macro TRACE_ASM_IRQ_DISABLE
bl trace_hardirqs_off
.endm
.macro TRACE_ASM_IRQ_ENABLE
bl trace_hardirqs_on
.endm
#else
.macro TRACE_ASM_IRQ_DISABLE
.endm
.macro TRACE_ASM_IRQ_ENABLE
.endm
#endif
.macro IRQ_DISABLE scratch
clri
TRACE_ASM_IRQ_DISABLE
.endm
.macro IRQ_ENABLE scratch
TRACE_ASM_IRQ_ENABLE
seti
.endm
......
arch/arc/include/asm/mmzone.h 0 → 100644
浏览文件 @ 0e0162bb
/*
* Copyright (C) 2016 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef _ASM_ARC_MMZONE_H
#define _ASM_ARC_MMZONE_H
#ifdef CONFIG_DISCONTIGMEM
extern struct pglist_data node_data[];
#define NODE_DATA(nid) (&node_data[nid])
static inline int pfn_to_nid(unsigned long pfn)
{
int is_end_low = 1;
if (IS_ENABLED(CONFIG_ARC_HAS_PAE40))
is_end_low = pfn <= virt_to_pfn(0xFFFFFFFFUL);
/*
* node 0: lowmem: 0x8000_0000 to 0xFFFF_FFFF
* node 1: HIGHMEM w/o PAE40: 0x0 to 0x7FFF_FFFF
* HIGHMEM with PAE40: 0x1_0000_0000 to ...
*/
if (pfn >= ARCH_PFN_OFFSET && is_end_low)
return 0;
return 1;
}
static inline int pfn_valid(unsigned long pfn)
{
int nid = pfn_to_nid(pfn);
return (pfn <= node_end_pfn(nid));
}
#endif /* CONFIG_DISCONTIGMEM */
#endif
arch/arc/include/asm/page.h
浏览文件 @ 0e0162bb
......@@ -72,11 +72,20 @@ typedef unsigned long pgprot_t;
typedef pte_t * pgtable_t;
/*
* Use virt_to_pfn with caution:
* If used in pte or paddr related macros, it could cause truncation
* in PAE40 builds
* As a rule of thumb, only use it in helpers starting with virt_
* You have been warned !
*/
#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT)
#define ARCH_PFN_OFFSET virt_to_pfn(CONFIG_LINUX_LINK_BASE)
#ifdef CONFIG_FLATMEM
#define pfn_valid(pfn) (((pfn) - ARCH_PFN_OFFSET) < max_mapnr)
#endif
/*
* __pa, __va, virt_to_page (ALERT: deprecated, don't use them)
......@@ -85,12 +94,10 @@ typedef pte_t * pgtable_t;
* virt here means link-address/program-address as embedded in object code.
* And for ARC, link-addr = physical address
*/
#define __pa(vaddr) ((unsigned long)vaddr)
#define __pa(vaddr) ((unsigned long)(vaddr))
#define __va(paddr) ((void *)((unsigned long)(paddr)))
#define virt_to_page(kaddr) \
(mem_map + virt_to_pfn((kaddr) - CONFIG_LINUX_LINK_BASE))
#define virt_to_page(kaddr) pfn_to_page(virt_to_pfn(kaddr))
#define virt_addr_valid(kaddr) pfn_valid(virt_to_pfn(kaddr))
/* Default Permissions for stack/heaps pages (Non Executable) */
......
arch/arc/include/asm/pgtable.h
浏览文件 @ 0e0162bb
......@@ -278,14 +278,13 @@ static inline void pmd_set(pmd_t *pmdp, pte_t *ptep)
#define pmd_present(x) (pmd_val(x))
#define pmd_clear(xp) do { pmd_val(*(xp)) = 0; } while (0)
#define pte_page(pte) \
(mem_map + virt_to_pfn(pte_val(pte) - CONFIG_LINUX_LINK_BASE))
#define pte_page(pte) pfn_to_page(pte_pfn(pte))
#define mk_pte(page, prot) pfn_pte(page_to_pfn(page), prot)
#define pte_pfn(pte) virt_to_pfn(pte_val(pte))
#define pfn_pte(pfn, prot) (__pte(((pte_t)(pfn) << PAGE_SHIFT) | \
pgprot_val(prot)))
#define __pte_index(addr) (virt_to_pfn(addr) & (PTRS_PER_PTE - 1))
#define pfn_pte(pfn, prot) (__pte(((pte_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot)))
/* Don't use virt_to_pfn for macros below: could cause truncations for PAE40*/
#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT)
#define __pte_index(addr) (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
/*
* pte_offset gets a @ptr to PMD entry (PGD in our 2-tier paging system)
......
arch/arc/kernel/entry-arcv2.S
浏览文件 @ 0e0162bb
......@@ -69,8 +69,11 @@ ENTRY(handle_interrupt)
clri ; To make status32.IE agree with CPU internal state
lr r0, [ICAUSE]
#ifdef CONFIG_TRACE_IRQFLAGS
TRACE_ASM_IRQ_DISABLE
#endif
lr r0, [ICAUSE]
mov blink, ret_from_exception
b.d arch_do_IRQ
......@@ -169,6 +172,11 @@ END(EV_TLBProtV)
.Lrestore_regs:
# Interrpts are actually disabled from this point on, but will get
# reenabled after we return from interrupt/exception.
# But irq tracer needs to be told now...
TRACE_ASM_IRQ_ENABLE
ld r0, [sp, PT_status32] ; U/K mode at time of entry
lr r10, [AUX_IRQ_ACT]
......
arch/arc/kernel/entry-compact.S
浏览文件 @ 0e0162bb
......@@ -341,6 +341,9 @@ END(call_do_page_fault)
.Lrestore_regs:
# Interrpts are actually disabled from this point on, but will get
# reenabled after we return from interrupt/exception.
# But irq tracer needs to be told now...
TRACE_ASM_IRQ_ENABLE
lr r10, [status32]
......
arch/arc/mm/init.c
浏览文件 @ 0e0162bb
......@@ -13,6 +13,7 @@
#ifdef CONFIG_BLK_DEV_INITRD
#include <linux/initrd.h>
#endif
#include <linux/of_fdt.h>
#include <linux/swap.h>
#include <linux/module.h>
#include <linux/highmem.h>
......@@ -29,11 +30,16 @@ static const unsigned long low_mem_start = CONFIG_LINUX_LINK_BASE;
static unsigned long low_mem_sz;
#ifdef CONFIG_HIGHMEM
static unsigned long min_high_pfn;
static unsigned long min_high_pfn, max_high_pfn;
static u64 high_mem_start;
static u64 high_mem_sz;
#endif
#ifdef CONFIG_DISCONTIGMEM
struct pglist_data node_data[MAX_NUMNODES] __read_mostly;
EXPORT_SYMBOL(node_data);
#endif
/* User can over-ride above with "mem=nnn[KkMm]" in cmdline */
static int __init setup_mem_sz(char *str)
{
......@@ -108,13 +114,11 @@ void __init setup_arch_memory(void)
/* Last usable page of low mem */
max_low_pfn = max_pfn = PFN_DOWN(low_mem_start + low_mem_sz);
#ifdef CONFIG_HIGHMEM
min_high_pfn = PFN_DOWN(high_mem_start);
max_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
#ifdef CONFIG_FLATMEM
/* pfn_valid() uses this */
max_mapnr = max_low_pfn - min_low_pfn;
#endif
max_mapnr = max_pfn - min_low_pfn;
/*------------- bootmem allocator setup -----------------------*/
/*
......@@ -128,7 +132,7 @@ void __init setup_arch_memory(void)
* the crash
*/
memblock_add(low_mem_start, low_mem_sz);
memblock_add_node(low_mem_start, low_mem_sz, 0);
memblock_reserve(low_mem_start, __pa(_end) - low_mem_start);
#ifdef CONFIG_BLK_DEV_INITRD
......@@ -136,6 +140,9 @@ void __init setup_arch_memory(void)
memblock_reserve(__pa(initrd_start), initrd_end - initrd_start);
#endif
early_init_fdt_reserve_self();
early_init_fdt_scan_reserved_mem();
memblock_dump_all();
/*----------------- node/zones setup --------------------------*/
......@@ -145,13 +152,6 @@ void __init setup_arch_memory(void)
zones_size[ZONE_NORMAL] = max_low_pfn - min_low_pfn;
zones_holes[ZONE_NORMAL] = 0;
#ifdef CONFIG_HIGHMEM
zones_size[ZONE_HIGHMEM] = max_pfn - max_low_pfn;
/* This handles the peripheral address space hole */
zones_holes[ZONE_HIGHMEM] = min_high_pfn - max_low_pfn;
#endif
/*
* We can't use the helper free_area_init(zones[]) because it uses
* PAGE_OFFSET to compute the @min_low_pfn which would be wrong
......@@ -164,6 +164,34 @@ void __init setup_arch_memory(void)
zones_holes); /* holes */
#ifdef CONFIG_HIGHMEM
/*
* Populate a new node with highmem
*
* On ARC (w/o PAE) HIGHMEM addresses are actually smaller (0 based)
* than addresses in normal ala low memory (0x8000_0000 based).
* Even with PAE, the huge peripheral space hole would waste a lot of
* mem with single mem_map[]. This warrants a mem_map per region design.
* Thus HIGHMEM on ARC is imlemented with DISCONTIGMEM.
*
* DISCONTIGMEM in turns requires multiple nodes. node 0 above is
* populated with normal memory zone while node 1 only has highmem
*/
node_set_online(1);
min_high_pfn = PFN_DOWN(high_mem_start);
max_high_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
zones_size[ZONE_NORMAL] = 0;
zones_holes[ZONE_NORMAL] = 0;
zones_size[ZONE_HIGHMEM] = max_high_pfn - min_high_pfn;
zones_holes[ZONE_HIGHMEM] = 0;
free_area_init_node(1, /* node-id */
zones_size, /* num pages per zone */
min_high_pfn, /* first pfn of node */
zones_holes); /* holes */
high_memory = (void *)(min_high_pfn << PAGE_SHIFT);
kmap_init();
#endif
......@@ -181,7 +209,7 @@ void __init mem_init(void)
unsigned long tmp;
reset_all_zones_managed_pages();
for (tmp = min_high_pfn; tmp < max_pfn; tmp++)
for (tmp = min_high_pfn; tmp < max_high_pfn; tmp++)
free_highmem_page(pfn_to_page(tmp));
#endif
......
arch/arm/boot/dts/am335x-baltos-ir5221.dts
浏览文件 @ 0e0162bb
......@@ -470,9 +470,12 @@
};
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <0>;
phy-mode = "rmii";
dual_emac_res_vlan = <1>;
fixed-link {
speed = <100>;
full-duplex;
};
};
&cpsw_emac1 {
......
arch/arm/boot/dts/am33xx.dtsi
浏览文件 @ 0e0162bb
......@@ -860,7 +860,7 @@
ti,no-idle-on-init;
reg = <0x50000000 0x2000>;
interrupts = <100>;
dmas = <&edma 52>;
dmas = <&edma 52 0>;
dma-names = "rxtx";
gpmc,num-cs = <7>;
gpmc,num-waitpins = <2>;
......
arch/arm/boot/dts/am4372.dtsi
浏览文件 @ 0e0162bb
......@@ -207,7 +207,7 @@
ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
<&edma_tptc2 0>;
ti,edma-memcpy-channels = <32 33>;
ti,edma-memcpy-channels = <58 59>;
};
edma_tptc0: tptc@49800000 {
......@@ -884,7 +884,7 @@
gpmc: gpmc@50000000 {
compatible = "ti,am3352-gpmc";
ti,hwmods = "gpmc";
dmas = <&edma 52>;
dmas = <&edma 52 0>;
dma-names = "rxtx";
clocks = <&l3s_gclk>;
clock-names = "fck";
......
arch/arm/boot/dts/am43x-epos-evm.dts
浏览文件 @ 0e0162bb
......@@ -794,3 +794,8 @@
tx-num-evt = <32>;
rx-num-evt = <32>;
};
&synctimer_32kclk {
assigned-clocks = <&mux_synctimer32k_ck>;
assigned-clock-parents = <&clkdiv32k_ick>;
};
arch/arm/boot/dts/am57xx-beagle-x15.dts
浏览文件 @ 0e0162bb
......@@ -99,13 +99,6 @@
#cooling-cells = <2>;
};
extcon_usb1: extcon_usb1 {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&extcon_usb1_pins>;
};
hdmi0: connector {
compatible = "hdmi-connector";
label = "hdmi";
......@@ -349,12 +342,6 @@
>;
};
extcon_usb1_pins: extcon_usb1_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */
>;
};
tpd12s015_pins: pinmux_tpd12s015_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x37b0, PIN_OUTPUT | MUX_MODE14) /* gpio7_10 CT_CP_HPD */
......@@ -706,10 +693,6 @@
pinctrl-0 = <&usb1_pins>;
};
&omap_dwc3_1 {
extcon = <&extcon_usb1>;
};
&omap_dwc3_2 {
extcon = <&extcon_usb2>;
};
......
arch/arm/boot/dts/armada-385-linksys.dtsi
浏览文件 @ 0e0162bb
......@@ -117,7 +117,7 @@
};
/* USB part of the eSATA/USB 2.0 port */
usb@50000 {
usb@58000 {
status = "okay";
};
......
arch/arm/boot/dts/dm814x-clocks.dtsi
浏览文件 @ 0e0162bb
......@@ -4,6 +4,157 @@
* published by the Free Software Foundation.
*/
&pllss {
/*
* See TRM "2.6.10 Connected outputso DPLLS" and
* "2.6.11 Connected Outputs of DPLLJ". Only clkout is
* connected except for hdmi and usb.
*/
adpll_mpu_ck: adpll@40 {
#clock-cells = <1>;
compatible = "ti,dm814-adpll-s-clock";
reg = <0x40 0x40>;
clocks = <&devosc_ck &devosc_ck &devosc_ck>;
clock-names = "clkinp", "clkinpulow", "clkinphif";
clock-output-names = "481c5040.adpll.dcoclkldo",
"481c5040.adpll.clkout",
"481c5040.adpll.clkoutx2",
"481c5040.adpll.clkouthif";
};
adpll_dsp_ck: adpll@80 {
#clock-cells = <1>;
compatible = "ti,dm814-adpll-lj-clock";
reg = <0x80 0x30>;
clocks = <&devosc_ck &devosc_ck>;
clock-names = "clkinp", "clkinpulow";
clock-output-names = "481c5080.adpll.dcoclkldo",
"481c5080.adpll.clkout",
"481c5080.adpll.clkoutldo";
};
adpll_sgx_ck: adpll@b0 {
#clock-cells = <1>;
compatible = "ti,dm814-adpll-lj-clock";
reg = <0xb0 0x30>;
clocks = <&devosc_ck &devosc_ck>;
clock-names = "clkinp", "clkinpulow";
clock-output-names = "481c50b0.adpll.dcoclkldo",
"481c50b0.adpll.clkout",
"481c50b0.adpll.clkoutldo";
};
adpll_hdvic_ck: adpll@e0 {
#clock-cells = <1>;
compatible = "ti,dm814-adpll-lj-clock";
reg = <0xe0 0x30>;
clocks = <&devosc_ck &devosc_ck>;
clock-names = "clkinp", "clkinpulow";
clock-output-names = "481c50e0.adpll.dcoclkldo",
"481c50e0.adpll.clkout",
"481c50e0.adpll.clkoutldo";
};
adpll_l3_ck: adpll@110 {
#clock-cells = <1>;
compatible = "ti,dm814-adpll-lj-clock";
reg = <0x110 0x30>;
clocks = <&devosc_ck &devosc_ck>;
clock-names = "clkinp", "clkinpulow";
clock-output-names = "481c5110.adpll.dcoclkldo",
"481c5110.adpll.clkout",
"481c5110.adpll.clkoutldo";
};
adpll_isp_ck: adpll@140 {
#clock-cells = <1>;
compatible = "ti,dm814-adpll-lj-clock";
reg = <0x140 0x30>;
clocks = <&devosc_ck &devosc_ck>;
clock-names = "clkinp", "clkinpulow";
clock-output-names = "481c5140.adpll.dcoclkldo",
"481c5140.adpll.clkout",
"481c5140.adpll.clkoutldo";
};
adpll_dss_ck: adpll@170 {
#clock-cells = <1>;
compatible = "ti,dm814-adpll-lj-clock";
reg = <0x170 0x30>;
clocks = <&devosc_ck &devosc_ck>;
clock-names = "clkinp", "clkinpulow";
clock-output-names = "481c5170.adpll.dcoclkldo",
"481c5170.adpll.clkout",
"481c5170.adpll.clkoutldo";
};
adpll_video0_ck: adpll@1a0 {
#clock-cells = <1>;
compatible = "ti,dm814-adpll-lj-clock";
reg = <0x1a0 0x30>;
clocks = <&devosc_ck &devosc_ck>;
clock-names = "clkinp", "clkinpulow";
clock-output-names = "481c51a0.adpll.dcoclkldo",
"481c51a0.adpll.clkout",
"481c51a0.adpll.clkoutldo";
};
adpll_video1_ck: adpll@1d0 {
#clock-cells = <1>;
compatible = "ti,dm814-adpll-lj-clock";
reg = <0x1d0 0x30>;
clocks = <&devosc_ck &devosc_ck>;
clock-names = "clkinp", "clkinpulow";
clock-output-names = "481c51d0.adpll.dcoclkldo",
"481c51d0.adpll.clkout",
"481c51d0.adpll.clkoutldo";
};
adpll_hdmi_ck: adpll@200 {
#clock-cells = <1>;
compatible = "ti,dm814-adpll-lj-clock";
reg = <0x200 0x30>;
clocks = <&devosc_ck &devosc_ck>;
clock-names = "clkinp", "clkinpulow";
clock-output-names = "481c5200.adpll.dcoclkldo",
"481c5200.adpll.clkout",
"481c5200.adpll.clkoutldo";
};
adpll_audio_ck: adpll@230 {
#clock-cells = <1>;
compatible = "ti,dm814-adpll-lj-clock";
reg = <0x230 0x30>;
clocks = <&devosc_ck &devosc_ck>;
clock-names = "clkinp", "clkinpulow";
clock-output-names = "481c5230.adpll.dcoclkldo",
"481c5230.adpll.clkout",
"481c5230.adpll.clkoutldo";
};
adpll_usb_ck: adpll@260 {
#clock-cells = <1>;
compatible = "ti,dm814-adpll-lj-clock";
reg = <0x260 0x30>;
clocks = <&devosc_ck &devosc_ck>;
clock-names = "clkinp", "clkinpulow";
clock-output-names = "481c5260.adpll.dcoclkldo",
"481c5260.adpll.clkout",
"481c5260.adpll.clkoutldo";
};
adpll_ddr_ck: adpll@290 {
#clock-cells = <1>;
compatible = "ti,dm814-adpll-lj-clock";
reg = <0x290 0x30>;
clocks = <&devosc_ck &devosc_ck>;
clock-names = "clkinp", "clkinpulow";
clock-output-names = "481c5290.adpll.dcoclkldo",
"481c5290.adpll.clkout",
"481c5290.adpll.clkoutldo";
};
};
&pllss_clocks {
timer1_fck: timer1_fck {
#clock-cells = <0>;
......@@ -23,6 +174,24 @@
reg = <0x2e0>;
};
/* CPTS_RFT_CLK in RMII_REFCLK_SRC, usually sourced from auiod */
cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&adpll_video0_ck 1
&adpll_video1_ck 1
&adpll_audio_ck 1>;
ti,bit-shift = <1>;
reg = <0x2e8>;
};
/* REVISIT: Set up with a proper mux using RMII_REFCLK_SRC */
cpsw_125mhz_gclk: cpsw_125mhz_gclk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <125000000>;
};
sysclk18_ck: sysclk18_ck {
#clock-cells = <0>;
compatible = "ti,mux-clock";
......@@ -79,37 +248,6 @@
compatible = "fixed-clock";
clock-frequency = <1000000000>;
};
sysclk4_ck: sysclk4_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <222000000>;
};
sysclk6_ck: sysclk6_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <100000000>;
};
sysclk10_ck: sysclk10_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <48000000>;
};
cpsw_125mhz_gclk: cpsw_125mhz_gclk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <125000000>;
};
cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <250000000>;
};
};
&prcm_clocks {
......@@ -138,6 +276,49 @@
clock-div = <78125>;
};
/* L4_HS 220 MHz*/
sysclk4_ck: sysclk4_ck {
#clock-cells = <0>;
compatible = "ti,fixed-factor-clock";
clocks = <&adpll_l3_ck 1>;
ti,clock-mult = <1>;
ti,clock-div = <1>;
};
/* L4_FWCFG */
sysclk5_ck: sysclk5_ck {
#clock-cells = <0>;
compatible = "ti,fixed-factor-clock";
clocks = <&adpll_l3_ck 1>;
ti,clock-mult = <1>;
ti,clock-div = <2>;
};
/* L4_LS 110 MHz */
sysclk6_ck: sysclk6_ck {
#clock-cells = <0>;
compatible = "ti,fixed-factor-clock";
clocks = <&adpll_l3_ck 1>;
ti,clock-mult = <1>;
ti,clock-div = <2>;
};
sysclk8_ck: sysclk8_ck {
#clock-cells = <0>;
compatible = "ti,fixed-factor-clock";
clocks = <&adpll_usb_ck 1>;
ti,clock-mult = <1>;
ti,clock-div = <1>;
};
sysclk10_ck: sysclk10_ck {
compatible = "ti,divider-clock";
reg = <0x324>;
ti,max-div = <7>;
#clock-cells = <0>;
clocks = <&adpll_usb_ck 1>;
};
aud_clkin0_ck: aud_clkin0_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
......
arch/arm/boot/dts/dra62x-clocks.dtsi
浏览文件 @ 0e0162bb
......@@ -6,6 +6,32 @@
#include "dm814x-clocks.dtsi"
/* Compared to dm814x, dra62x does not have hdic, l3 or dss PLLs */
&adpll_hdvic_ck {
status = "disabled";
};
&adpll_l3_ck {
status = "disabled";
};
&adpll_dss_ck {
status = "disabled";
};
/* Compared to dm814x, dra62x has interconnect clocks on isp PLL */
&sysclk4_ck {
clocks = <&adpll_isp_ck 1>;
};
&sysclk5_ck {
clocks = <&adpll_isp_ck 1>;
};
&sysclk6_ck {
clocks = <&adpll_isp_ck 1>;
};
/*
* Compared to dm814x, dra62x has different shifts and more mux options.
* Please add the extra options for ysclk_14 and 16 if really needed.
......
arch/arm/boot/dts/dra7xx-clocks.dtsi
浏览文件 @ 0e0162bb
......@@ -98,12 +98,20 @@
clock-frequency = <32768>;
};
sys_32k_ck: sys_32k_ck {
sys_clk32_crystal_ck: sys_clk32_crystal_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
};
sys_clk32_pseudo_ck: sys_clk32_pseudo_ck {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clocks = <&sys_clkin1>;
clock-mult = <1>;
clock-div = <610>;
};
virt_12000000_ck: virt_12000000_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
......@@ -2170,4 +2178,12 @@
ti,bit-shift = <22>;
reg = <0x0558>;
};
sys_32k_ck: sys_32k_ck {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clk32_crystal_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>;
ti,bit-shift = <8>;
reg = <0x6c4>;
};
};
arch/arm/boot/dts/meson8.dtsi
浏览文件 @ 0e0162bb
......@@ -91,8 +91,8 @@
clock-frequency = <141666666>;
};
pinctrl: pinctrl@c1109880 {
compatible = "amlogic,meson8-pinctrl";
pinctrl_cbus: pinctrl@c1109880 {
compatible = "amlogic,meson8-cbus-pinctrl";
reg = <0xc1109880 0x10>;
#address-cells = <1>;
#size-cells = <1>;
......@@ -108,29 +108,6 @@
#gpio-cells = <2>;
};
gpio_ao: ao-bank@c1108030 {
reg = <0xc8100014 0x4>,
<0xc810002c 0x4>,
<0xc8100024 0x8>;
reg-names = "mux", "pull", "gpio";
gpio-controller;
#gpio-cells = <2>;
};
uart_ao_a_pins: uart_ao_a {
mux {
groups = "uart_tx_ao_a", "uart_rx_ao_a";
function = "uart_ao";
};
};
i2c_ao_pins: i2c_mst_ao {
mux {
groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao";
function = "i2c_mst_ao";
};
};
spi_nor_pins: nor {
mux {
groups = "nor_d", "nor_q", "nor_c", "nor_cs";
......@@ -157,4 +134,34 @@
};
};
pinctrl_aobus: pinctrl@c8100084 {
compatible = "amlogic,meson8-aobus-pinctrl";
reg = <0xc8100084 0xc>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
gpio_ao: ao-bank@c1108030 {
reg = <0xc8100014 0x4>,
<0xc810002c 0x4>,
<0xc8100024 0x8>;
reg-names = "mux", "pull", "gpio";
gpio-controller;
#gpio-cells = <2>;
};
uart_ao_a_pins: uart_ao_a {
mux {
groups = "uart_tx_ao_a", "uart_rx_ao_a";
function = "uart_ao";
};
};
i2c_ao_pins: i2c_mst_ao {
mux {
groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao";
function = "i2c_mst_ao";
};
};
};
}; /* end of / */
arch/arm/boot/dts/meson8b.dtsi
浏览文件 @ 0e0162bb
......@@ -155,8 +155,8 @@
reg = <0xc1108000 0x4>, <0xc1104000 0x460>;
};
pinctrl: pinctrl@c1109880 {
compatible = "amlogic,meson8b-pinctrl";
pinctrl_cbus: pinctrl@c1109880 {
compatible = "amlogic,meson8b-cbus-pinctrl";
reg = <0xc1109880 0x10>;
#address-cells = <1>;
#size-cells = <1>;
......@@ -171,6 +171,14 @@
gpio-controller;
#gpio-cells = <2>;
};
};
pinctrl_aobus: pinctrl@c8100084 {
compatible = "amlogic,meson8b-aobus-pinctrl";
reg = <0xc8100084 0xc>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
gpio_ao: ao-bank@c1108030 {
reg = <0xc8100014 0x4>,
......
arch/arm/boot/dts/omap3-n900.dts
浏览文件 @ 0e0162bb
......@@ -329,6 +329,7 @@
regulator-name = "V28";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
regulator-always-on; /* due to battery cover sensor */
};
......@@ -336,30 +337,35 @@
regulator-name = "VCSI";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
};
&vaux3 {
regulator-name = "VMMC2_30";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3000000>;
regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
};
&vaux4 {
regulator-name = "VCAM_ANA_28";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
};
&vmmc1 {
regulator-name = "VMMC1";
regulator-min-microvolt = <1850000>;
regulator-max-microvolt = <3150000>;
regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
};
&vmmc2 {
regulator-name = "V28_A";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3000000>;
regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
regulator-always-on; /* due VIO leak to AIC34 VDDs */
};
......@@ -367,6 +373,7 @@
regulator-name = "VPLL";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
regulator-always-on;
};
......@@ -374,6 +381,7 @@
regulator-name = "VSDI_CSI";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
regulator-always-on;
};
......@@ -381,6 +389,7 @@
regulator-name = "VMMC2_IO_18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
};
&vio {
......
arch/arm/boot/dts/omap34xx.dtsi
浏览文件 @ 0e0162bb
......@@ -46,7 +46,7 @@
0x480bd800 0x017c>;
interrupts = <24>;
iommus = <&mmu_isp>;
syscon = <&scm_conf 0xdc>;
syscon = <&scm_conf 0x6c>;
ti,phy-type = <OMAP3ISP_PHY_TYPE_COMPLEX_IO>;
#clock-cells = <1>;
ports {
......
arch/arm/boot/dts/omap4.dtsi
浏览文件 @ 0e0162bb
......@@ -70,7 +70,7 @@
compatible = "arm,cortex-a9-twd-timer";
clocks = <&mpu_periphclk>;
reg = <0x48240600 0x20>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_EDGE_RISING)>;
interrupt-parent = <&gic>;
};
......
arch/arm/boot/dts/omap5-board-common.dtsi
浏览文件 @ 0e0162bb
......@@ -472,7 +472,7 @@
ldo1_reg: ldo1 {
/* VDDAPHY_CAM: vdda_csiport */
regulator-name = "ldo1";
regulator-min-microvolt = <1500000>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
......@@ -498,7 +498,7 @@
ldo4_reg: ldo4 {
/* VDDAPHY_DISP: vdda_dsiport/hdmi */
regulator-name = "ldo4";
regulator-min-microvolt = <1500000>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
......
arch/arm/boot/dts/omap5-cm-t54.dts
浏览文件 @ 0e0162bb
......@@ -513,7 +513,7 @@
ldo1_reg: ldo1 {
/* VDDAPHY_CAM: vdda_csiport */
regulator-name = "ldo1";
regulator-min-microvolt = <1500000>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
......@@ -537,7 +537,7 @@
ldo4_reg: ldo4 {
/* VDDAPHY_DISP: vdda_dsiport/hdmi */
regulator-name = "ldo4";
regulator-min-microvolt = <1500000>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
......
arch/arm/boot/dts/omap5.dtsi
浏览文件 @ 0e0162bb
......@@ -269,7 +269,7 @@
omap5_pmx_wkup: pinmux@c840 {
compatible = "ti,omap5-padconf",
"pinctrl-single";
reg = <0xc840 0x0038>;
reg = <0xc840 0x003c>;
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
......
arch/arm/boot/dts/qcom-apq8064.dtsi
浏览文件 @ 0e0162bb
......@@ -666,7 +666,7 @@
};
sata0: sata@29000000 {
compatible = "generic-ahci";
compatible = "qcom,apq8064-ahci", "generic-ahci";
status = "disabled";
reg = <0x29000000 0x180>;
interrupts = <GIC_SPI 209 IRQ_TYPE_NONE>;
......@@ -688,6 +688,7 @@
phys = <&sata_phy0>;
phy-names = "sata-phy";
ports-implemented = <0x1>;
};
/* Temporary fixed regulator */
......
arch/arm/boot/dts/qcom-msm8974.dtsi
浏览文件 @ 0e0162bb
/dts-v1/;
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/qcom,gcc-msm8974.h>
#include "skeleton.dtsi"
......@@ -460,8 +460,6 @@
clock-names = "core", "iface";
#address-cells = <1>;
#size-cells = <0>;
dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
dma-names = "tx", "rx";
};
spmi_bus: spmi@fc4cf000 {
......@@ -479,16 +477,6 @@
interrupt-controller;
#interrupt-cells = <4>;
};
blsp2_dma: dma-controller@f9944000 {
compatible = "qcom,bam-v1.4.0";
reg = <0xf9944000 0x19000>;
interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
};
};
smd {
......
arch/arm/boot/dts/r8a7791-koelsch.dts
浏览文件 @ 0e0162bb
......@@ -661,6 +661,7 @@
};
&pcie_bus_clk {
clock-frequency = <100000000>;
status = "okay";
};
......
arch/arm/boot/dts/r8a7791-porter.dts
浏览文件 @ 0e0162bb
......@@ -143,19 +143,11 @@
};
&pfc {
pinctrl-0 = <&scif_clk_pins>;
pinctrl-names = "default";
scif0_pins: serial0 {
renesas,groups = "scif0_data_d";
renesas,function = "scif0";
};
scif_clk_pins: scif_clk {
renesas,groups = "scif_clk";
renesas,function = "scif_clk";
};
ether_pins: ether {
renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
renesas,function = "eth";
......@@ -229,11 +221,6 @@
status = "okay";
};
&scif_clk {
clock-frequency = <14745600>;
status = "okay";
};
&ether {
pinctrl-0 = <&ether_pins &phy1_pins>;
pinctrl-names = "default";
......@@ -414,6 +401,7 @@
};
&pcie_bus_clk {
clock-frequency = <100000000>;
status = "okay";
};
......
arch/arm/boot/dts/r8a7791.dtsi
浏览文件 @ 0e0162bb
......@@ -1083,9 +1083,8 @@
pcie_bus_clk: pcie_bus_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <100000000>;
clock-frequency = <0>;
clock-output-names = "pcie_bus";
status = "disabled";
};
/* External SCIF clock */
......@@ -1094,7 +1093,6 @@
#clock-cells = <0>;
/* This value must be overridden by the board. */
clock-frequency = <0>;
status = "disabled";
};
/* External USB clock - can be overridden by the board */
......@@ -1112,7 +1110,6 @@
/* This value must be overridden by the board. */
clock-frequency = <0>;
clock-output-names = "can_clk";
status = "disabled";
};
/* Special CPG clocks */
......
arch/arm/boot/dts/sun8i-q8-common.dtsi
浏览文件 @ 0e0162bb
......@@ -125,8 +125,6 @@
};
&reg_dc1sw {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-lcd";
};
......
arch/arm/configs/u8500_defconfig
浏览文件 @ 0e0162bb
......@@ -63,6 +63,9 @@ CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_BU21013=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_AB8500_PONKEY=y
CONFIG_RMI4_CORE=y
CONFIG_RMI4_I2C=y
CONFIG_RMI4_F11=y
# CONFIG_SERIO is not set
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_LEGACY_PTYS is not set
......
arch/arm/include/asm/cputype.h
浏览文件 @ 0e0162bb
......@@ -276,7 +276,7 @@ static inline int __attribute_const__ cpuid_feature_extract_field(u32 features,
int feature = (features >> field) & 15;
/* feature registers are signed values */
if (feature > 8)
if (feature > 7)
feature -= 16;
return feature;
......
arch/arm/include/asm/domain.h
浏览文件 @ 0e0162bb
......@@ -84,6 +84,7 @@
#ifndef __ASSEMBLY__
#ifdef CONFIG_CPU_CP15_MMU
static inline unsigned int get_domain(void)
{
unsigned int domain;
......@@ -103,6 +104,16 @@ static inline void set_domain(unsigned val)
: : "r" (val) : "memory");
isb();
}
#else
static inline unsigned int get_domain(void)
{
return 0;
}
static inline void set_domain(unsigned val)
{
}
#endif
#ifdef CONFIG_CPU_USE_DOMAINS
#define modify_domain(dom,type) \
......
arch/arm/kernel/head-nommu.S
浏览文件 @ 0e0162bb
......@@ -236,7 +236,7 @@ ENTRY(__setup_mpu)
mov r0, #CONFIG_VECTORS_BASE @ Cover from VECTORS_BASE
ldr r5,=(MPU_AP_PL1RW_PL0NA | MPU_RGN_NORMAL)
/* Writing N to bits 5:1 (RSR_SZ) --> region size 2^N+1 */
mov r6, #(((PAGE_SHIFT - 1) << MPU_RSR_SZ) | 1 << MPU_RSR_EN)
mov r6, #(((2 * PAGE_SHIFT - 1) << MPU_RSR_SZ) | 1 << MPU_RSR_EN)
setup_region r0, r5, r6, MPU_DATA_SIDE @ VECTORS_BASE, PL0 NA, enabled
beq 3f @ Memory-map not unified
......
arch/arm/kernel/setup.c
浏览文件 @ 0e0162bb
......@@ -512,7 +512,7 @@ static void __init elf_hwcap_fixup(void)
*/
if (cpuid_feature_extract(CPUID_EXT_ISAR3, 12) > 1 ||
(cpuid_feature_extract(CPUID_EXT_ISAR3, 12) == 1 &&
cpuid_feature_extract(CPUID_EXT_ISAR3, 20) >= 3))
cpuid_feature_extract(CPUID_EXT_ISAR4, 20) >= 3))
elf_hwcap &= ~HWCAP_SWP;
}
......
arch/arm/kvm/arm.c
浏览文件 @ 0e0162bb
......@@ -1112,10 +1112,17 @@ static void __init hyp_cpu_pm_init(void)
{
cpu_pm_register_notifier(&hyp_init_cpu_pm_nb);
}
static void __init hyp_cpu_pm_exit(void)
{
cpu_pm_unregister_notifier(&hyp_init_cpu_pm_nb);
}
#else
static inline void hyp_cpu_pm_init(void)
{
}
static inline void hyp_cpu_pm_exit(void)
{
}
#endif
static void teardown_common_resources(void)
......@@ -1141,9 +1148,7 @@ static int init_subsystems(void)
/*
* Register CPU Hotplug notifier
*/
cpu_notifier_register_begin();
err = __register_cpu_notifier(&hyp_init_cpu_nb);
cpu_notifier_register_done();
err = register_cpu_notifier(&hyp_init_cpu_nb);
if (err) {
kvm_err("Cannot register KVM init CPU notifier (%d)\n", err);
return err;
......@@ -1193,6 +1198,8 @@ static void teardown_hyp_mode(void)
free_hyp_pgds();
for_each_possible_cpu(cpu)
free_page(per_cpu(kvm_arm_hyp_stack_page, cpu));
unregister_cpu_notifier(&hyp_init_cpu_nb);
hyp_cpu_pm_exit();
}
static int init_vhe_mode(void)
......
arch/arm/kvm/mmu.c
浏览文件 @ 0e0162bb
......@@ -1004,7 +1004,7 @@ static bool transparent_hugepage_adjust(kvm_pfn_t *pfnp, phys_addr_t *ipap)
kvm_pfn_t pfn = *pfnp;
gfn_t gfn = *ipap >> PAGE_SHIFT;
if (PageTransCompound(pfn_to_page(pfn))) {
if (PageTransCompoundMap(pfn_to_page(pfn))) {
unsigned long mask;
/*
* The address we faulted on is backed by a transparent huge
......
arch/arm/mach-davinci/board-mityomapl138.c
浏览文件 @ 0e0162bb
......@@ -121,6 +121,11 @@ static void read_factory_config(struct nvmem_device *nvmem, void *context)
const char *partnum = NULL;
struct davinci_soc_info *soc_info = &davinci_soc_info;
if (!IS_BUILTIN(CONFIG_NVMEM)) {
pr_warn("Factory Config not available without CONFIG_NVMEM\n");
goto bad_config;
}
ret = nvmem_device_read(nvmem, 0, sizeof(factory_config),
&factory_config);
if (ret != sizeof(struct factory_config)) {
......
arch/arm/mach-davinci/common.c
浏览文件 @ 0e0162bb
......@@ -33,6 +33,11 @@ void davinci_get_mac_addr(struct nvmem_device *nvmem, void *context)
char *mac_addr = davinci_soc_info.emac_pdata->mac_addr;
off_t offset = (off_t)context;
if (!IS_BUILTIN(CONFIG_NVMEM)) {
pr_warn("Cannot read MAC addr from EEPROM without CONFIG_NVMEM\n");
return;
}
/* Read MAC addr from EEPROM */
if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN)
pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr);
......
arch/arm/mach-exynos/pm_domains.c
浏览文件 @ 0e0162bb
......@@ -92,7 +92,7 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on)
if (IS_ERR(pd->clk[i]))
break;
if (IS_ERR(pd->clk[i]))
if (IS_ERR(pd->pclk[i]))
continue; /* Skip on first power up */
if (clk_set_parent(pd->clk[i], pd->pclk[i]))
pr_err("%s: error setting parent to clock%d\n",
......
arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
浏览文件 @ 0e0162bb
......@@ -71,6 +71,7 @@ struct platform_device *__init imx_add_sdhci_esdhc_imx(
if (!pdata)
pdata = &default_esdhc_pdata;
return imx_add_platform_device(data->devid, data->id, res,
ARRAY_SIZE(res), pdata, sizeof(*pdata));
return imx_add_platform_device_dmamask(data->devid, data->id, res,
ARRAY_SIZE(res), pdata, sizeof(*pdata),
DMA_BIT_MASK(32));
}
arch/arm/mach-omap2/clockdomains7xx_data.c
浏览文件 @ 0e0162bb
......@@ -461,7 +461,7 @@ static struct clockdomain ipu_7xx_clkdm = {
.cm_inst = DRA7XX_CM_CORE_AON_IPU_INST,
.clkdm_offs = DRA7XX_CM_CORE_AON_IPU_IPU_CDOFFS,
.dep_bit = DRA7XX_IPU_STATDEP_SHIFT,
.flags = CLKDM_CAN_HWSUP_SWSUP,
.flags = CLKDM_CAN_SWSUP,
};
static struct clockdomain mpu1_7xx_clkdm = {
......
arch/arm/mach-omap2/id.c
浏览文件 @ 0e0162bb
......@@ -669,9 +669,9 @@ void __init dra7xxx_check_revision(void)
case 0:
omap_revision = DRA722_REV_ES1_0;
break;
case 1:
default:
/* If we have no new revisions */
omap_revision = DRA722_REV_ES1_0;
omap_revision = DRA722_REV_ES2_0;
break;
}
break;
......
arch/arm/mach-omap2/io.c
浏览文件 @ 0e0162bb
......@@ -368,6 +368,7 @@ void __init omap5_map_io(void)
void __init dra7xx_map_io(void)
{
iotable_init(dra7xx_io_desc, ARRAY_SIZE(dra7xx_io_desc));
omap_barriers_init();
}
#endif
/*
......@@ -736,7 +737,8 @@ void __init omap5_init_late(void)
#ifdef CONFIG_SOC_DRA7XX
void __init dra7xx_init_early(void)
{
omap2_set_globals_tap(-1, OMAP2_L4_IO_ADDRESS(DRA7XX_TAP_BASE));
omap2_set_globals_tap(DRA7XX_CLASS,
OMAP2_L4_IO_ADDRESS(DRA7XX_TAP_BASE));
omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
omap2_control_base_init();
omap4_pm_init_early();
......
arch/arm/mach-omap2/omap-wakeupgen.c
浏览文件 @ 0e0162bb
......@@ -274,6 +274,10 @@ static inline void omap5_irq_save_context(void)
*/
static void irq_save_context(void)
{
/* DRA7 has no SAR to save */
if (soc_is_dra7xx())
return;
if (!sar_base)
sar_base = omap4_get_sar_ram_base();
......@@ -290,6 +294,9 @@ static void irq_sar_clear(void)
{
u32 val;
u32 offset = SAR_BACKUP_STATUS_OFFSET;
/* DRA7 has no SAR to save */
if (soc_is_dra7xx())
return;
if (soc_is_omap54xx())
offset = OMAP5_SAR_BACKUP_STATUS_OFFSET;
......
arch/arm/mach-omap2/omap_hwmod.c
浏览文件 @ 0e0162bb
......@@ -1416,9 +1416,7 @@ static void _enable_sysc(struct omap_hwmod *oh)
(sf & SYSC_HAS_CLOCKACTIVITY))
_set_clockactivity(oh, oh->class->sysc->clockact, &v);
/* If the cached value is the same as the new value, skip the write */
if (oh->_sysc_cache != v)
_write_sysconfig(v, oh);
_write_sysconfig(v, oh);
/*
* Set the autoidle bit only after setting the smartidle bit
......@@ -1481,7 +1479,9 @@ static void _idle_sysc(struct omap_hwmod *oh)
_set_master_standbymode(oh, idlemode, &v);
}
_write_sysconfig(v, oh);
/* If the cached value is the same as the new value, skip the write */
if (oh->_sysc_cache != v)
_write_sysconfig(v, oh);
}
/**
......
arch/arm/mach-omap2/omap_hwmod_81xx_data.c
浏览文件 @ 0e0162bb
......@@ -582,9 +582,11 @@ static struct omap_hwmod_ocp_if dm81xx_alwon_l3_slow__gpmc = {
.user = OCP_USER_MPU,
};
/* USB needs udelay 1 after reset at least on hp t410, use 2 for margin */
static struct omap_hwmod_class_sysconfig dm81xx_usbhsotg_sysc = {
.rev_offs = 0x0,
.sysc_offs = 0x10,
.srst_udelay = 2,
.sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
SYSC_HAS_SOFTRESET,
.idlemodes = SIDLE_SMART | MSTANDBY_FORCE | MSTANDBY_SMART,
......
arch/arm/mach-omap2/pm34xx.c
浏览文件 @ 0e0162bb
......@@ -198,7 +198,6 @@ void omap_sram_idle(void)
int per_next_state = PWRDM_POWER_ON;
int core_next_state = PWRDM_POWER_ON;
int per_going_off;
int core_prev_state;
u32 sdrc_pwr = 0;
mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
......@@ -278,16 +277,20 @@ void omap_sram_idle(void)
sdrc_write_reg(sdrc_pwr, SDRC_POWER);
/* CORE */
if (core_next_state < PWRDM_POWER_ON) {
core_prev_state = pwrdm_read_prev_pwrst(core_pwrdm);
if (core_prev_state == PWRDM_POWER_OFF) {
omap3_core_restore_context();
omap3_cm_restore_context();
omap3_sram_restore_context();
omap2_sms_restore_context();
}
if (core_next_state < PWRDM_POWER_ON &&
pwrdm_read_prev_pwrst(core_pwrdm) == PWRDM_POWER_OFF) {
omap3_core_restore_context();
omap3_cm_restore_context();
omap3_sram_restore_context();
omap2_sms_restore_context();
} else {
/*
* In off-mode resume path above, omap3_core_restore_context
* also handles the INTC autoidle restore done here so limit
* this to non-off mode resume paths so we don't do it twice.
*/
omap3_intc_resume_idle();
}
omap3_intc_resume_idle();
pwrdm_post_transition(NULL);
......
arch/arm/mach-omap2/soc.h
浏览文件 @ 0e0162bb
......@@ -489,6 +489,7 @@ IS_OMAP_TYPE(3430, 0x3430)
#define DRA752_REV_ES2_0 (DRA7XX_CLASS | (0x52 << 16) | (0x20 << 8))
#define DRA722_REV_ES1_0 (DRA7XX_CLASS | (0x22 << 16) | (0x10 << 8))
#define DRA722_REV_ES1_0 (DRA7XX_CLASS | (0x22 << 16) | (0x10 << 8))
#define DRA722_REV_ES2_0 (DRA7XX_CLASS | (0x22 << 16) | (0x20 << 8))
void omap2xxx_check_revision(void);
void omap3xxx_check_revision(void);
......
arch/arm/mach-pxa/devices.c
浏览文件 @ 0e0162bb
......@@ -1235,5 +1235,6 @@ static struct platform_device pxa2xx_pxa_dma = {
void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors)
{
pxa_dma_pdata.dma_channels = nb_channels;
pxa_dma_pdata.nb_requestors = nb_requestors;
pxa_register_device(&pxa2xx_pxa_dma, &pxa_dma_pdata);
}
arch/arm/mach-sa1100/Kconfig
浏览文件 @ 0e0162bb
......@@ -61,10 +61,7 @@ config SA1100_H3100
select MFD_IPAQ_MICRO
help
Say Y here if you intend to run this kernel on the Compaq iPAQ
H3100 handheld computer. Information about this machine and the
Linux port to this machine can be found at:
<http://www.handhelds.org/Compaq/index.html#iPAQ_H3100>
H3100 handheld computer.
config SA1100_H3600
bool "Compaq iPAQ H3600/H3700"
......@@ -73,10 +70,7 @@ config SA1100_H3600
select MFD_IPAQ_MICRO
help
Say Y here if you intend to run this kernel on the Compaq iPAQ
H3600 handheld computer. Information about this machine and the
Linux port to this machine can be found at:
<http://www.handhelds.org/Compaq/index.html#iPAQ_H3600>
H3600 and H3700 handheld computers.
config SA1100_BADGE4
bool "HP Labs BadgePAD 4"
......
arch/arm/mach-shmobile/timer.c
浏览文件 @ 0e0162bb
......@@ -40,8 +40,7 @@ static void __init shmobile_setup_delay_hz(unsigned int max_cpu_core_hz,
void __init shmobile_init_delay(void)
{
struct device_node *np, *cpus;
bool is_a7_a8_a9 = false;
bool is_a15 = false;
unsigned int div = 0;
bool has_arch_timer = false;
u32 max_freq = 0;
......@@ -55,27 +54,22 @@ void __init shmobile_init_delay(void)
if (!of_property_read_u32(np, "clock-frequency", &freq))
max_freq = max(max_freq, freq);
if (of_device_is_compatible(np, "arm,cortex-a8") ||
of_device_is_compatible(np, "arm,cortex-a9")) {
is_a7_a8_a9 = true;
} else if (of_device_is_compatible(np, "arm,cortex-a7")) {
is_a7_a8_a9 = true;
has_arch_timer = true;
} else if (of_device_is_compatible(np, "arm,cortex-a15")) {
is_a15 = true;
if (of_device_is_compatible(np, "arm,cortex-a8")) {
div = 2;
} else if (of_device_is_compatible(np, "arm,cortex-a9")) {
div = 1;
} else if (of_device_is_compatible(np, "arm,cortex-a7") ||
of_device_is_compatible(np, "arm,cortex-a15")) {
div = 1;
has_arch_timer = true;
}
}
of_node_put(cpus);
if (!max_freq)
if (!max_freq || !div)
return;
if (!has_arch_timer || !IS_ENABLED(CONFIG_ARM_ARCH_TIMER)) {
if (is_a7_a8_a9)
shmobile_setup_delay_hz(max_freq, 1, 3);
else if (is_a15)
shmobile_setup_delay_hz(max_freq, 2, 4);
}
if (!has_arch_timer || !IS_ENABLED(CONFIG_ARM_ARCH_TIMER))
shmobile_setup_delay_hz(max_freq, 1, div);
}
arch/arm/mach-socfpga/headsmp.S
浏览文件 @ 0e0162bb
......@@ -13,6 +13,7 @@
#include <asm/assembler.h>
.arch armv7-a
.arm
ENTRY(secondary_trampoline)
/* CPU1 will always fetch from 0x0 when it is brought out of reset.
......
arch/arm/mach-uniphier/platsmp.c
浏览文件 @ 0e0162bb
......@@ -120,7 +120,7 @@ static int __init uniphier_smp_prepare_trampoline(unsigned int max_cpus)
if (ret)
return ret;
uniphier_smp_rom_boot_rsv2 = ioremap(rom_rsv2_phys, sizeof(SZ_4));
uniphier_smp_rom_boot_rsv2 = ioremap(rom_rsv2_phys, SZ_4);
if (!uniphier_smp_rom_boot_rsv2) {
pr_err("failed to map ROM_BOOT_RSV2 register\n");
return -ENOMEM;
......
arch/arm/mm/dma-mapping.c
浏览文件 @ 0e0162bb
......@@ -762,7 +762,8 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
if (!mask)
return NULL;
buf = kzalloc(sizeof(*buf), gfp);
buf = kzalloc(sizeof(*buf),
gfp & ~(__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM));
if (!buf)
return NULL;
......
arch/arm/mm/nommu.c
浏览文件 @ 0e0162bb
......@@ -87,7 +87,6 @@ static unsigned long irbar_read(void)
/* MPU initialisation functions */
void __init sanity_check_meminfo_mpu(void)
{
int i;
phys_addr_t phys_offset = PHYS_OFFSET;
phys_addr_t aligned_region_size, specified_mem_size, rounded_mem_size;
struct memblock_region *reg;
......@@ -110,11 +109,13 @@ void __init sanity_check_meminfo_mpu(void)
} else {
/*
* memblock auto merges contiguous blocks, remove
* all blocks afterwards
* all blocks afterwards in one go (we can't remove
* blocks separately while iterating)
*/
pr_notice("Ignoring RAM after %pa, memory at %pa ignored\n",
&mem_start, &reg->base);
memblock_remove(reg->base, reg->size);
&mem_end, &reg->base);
memblock_remove(reg->base, 0 - reg->base);
break;
}
}
......@@ -144,7 +145,7 @@ void __init sanity_check_meminfo_mpu(void)
pr_warn("Truncating memory from %pa to %pa (MPU region constraints)",
&specified_mem_size, &aligned_region_size);
memblock_remove(mem_start + aligned_region_size,
specified_mem_size - aligned_round_size);
specified_mem_size - aligned_region_size);
mem_end = mem_start + aligned_region_size;
}
......@@ -261,7 +262,7 @@ void __init mpu_setup(void)
return;
region_err = mpu_setup_region(MPU_RAM_REGION, PHYS_OFFSET,
ilog2(meminfo.bank[0].size),
ilog2(memblock.memory.regions[0].size),
MPU_AP_PL1RW_PL0RW | MPU_RGN_NORMAL);
if (region_err) {
panic("MPU region initialization failure! %d", region_err);
......@@ -285,7 +286,7 @@ void __init arm_mm_memblock_reserve(void)
* some architectures which the DRAM is the exception vector to trap,
* alloc_page breaks with error, although it is not NULL, but "0."
*/
memblock_reserve(CONFIG_VECTORS_BASE, PAGE_SIZE);
memblock_reserve(CONFIG_VECTORS_BASE, 2 * PAGE_SIZE);
#else /* ifndef CONFIG_CPU_V7M */
/*
* There is no dedicated vector page on V7-M. So nothing needs to be
......
arch/arm64/boot/dts/broadcom/vulcan.dtsi
浏览文件 @ 0e0162bb
......@@ -108,12 +108,15 @@
reg = <0x0 0x30000000 0x0 0x10000000>;
reg-names = "PCI ECAM";
/* IO 0x4000_0000 - 0x4001_0000 */
ranges = <0x01000000 0 0x40000000 0 0x40000000 0 0x00010000
/* MEM 0x4800_0000 - 0x5000_0000 */
0x02000000 0 0x48000000 0 0x48000000 0 0x08000000
/* MEM64 pref 0x6_0000_0000 - 0x7_0000_0000 */
0x43000000 6 0x00000000 6 0x00000000 1 0x00000000>;
/*
* PCI ranges:
* IO no supported
* MEM 0x4000_0000 - 0x6000_0000
* MEM64 pref 0x40_0000_0000 - 0x60_0000_0000
*/
ranges =
<0x02000000 0 0x40000000 0 0x40000000 0 0x20000000
0x43000000 0x40 0x00000000 0x40 0x00000000 0x20 0x00000000>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map =
/* addr pin ic icaddr icintr */
......
arch/arm64/boot/dts/renesas/r8a7795.dtsi
浏览文件 @ 0e0162bb
......@@ -120,7 +120,6 @@
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
status = "disabled";
};
soc {
......
arch/arm64/boot/dts/socionext/uniphier-ph1-ld20-ref.dts
浏览文件 @ 0e0162bb
......@@ -70,7 +70,6 @@
i2c3 = &i2c3;
i2c4 = &i2c4;
i2c5 = &i2c5;
i2c6 = &i2c6;
};
};
......
arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi
浏览文件 @ 0e0162bb
......@@ -201,15 +201,12 @@
i2c2: i2c@58782000 {
compatible = "socionext,uniphier-fi2c";
status = "disabled";
reg = <0x58782000 0x80>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 43 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clocks = <&i2c_clk>;
clock-frequency = <100000>;
clock-frequency = <400000>;
};
i2c3: i2c@58783000 {
......@@ -227,12 +224,15 @@
i2c4: i2c@58784000 {
compatible = "socionext,uniphier-fi2c";
status = "disabled";
reg = <0x58784000 0x80>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 45 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>;
clocks = <&i2c_clk>;
clock-frequency = <400000>;
clock-frequency = <100000>;
};
i2c5: i2c@58785000 {
......@@ -245,16 +245,6 @@
clock-frequency = <400000>;
};
i2c6: i2c@58786000 {
compatible = "socionext,uniphier-fi2c";
reg = <0x58786000 0x80>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 26 4>;
clocks = <&i2c_clk>;
clock-frequency = <400000>;
};
system_bus: system-bus@58c00000 {
compatible = "socionext,uniphier-system-bus";
status = "disabled";
......
arch/arm64/include/asm/kvm_arm.h
浏览文件 @ 0e0162bb
......@@ -151,8 +151,7 @@
*/
#define VTCR_EL2_FLAGS (VTCR_EL2_TG0_64K | VTCR_EL2_SH0_INNER | \
VTCR_EL2_ORGN0_WBWA | VTCR_EL2_IRGN0_WBWA | \
VTCR_EL2_SL0_LVL1 | VTCR_EL2_T0SZ_40B | \
VTCR_EL2_RES1)
VTCR_EL2_SL0_LVL1 | VTCR_EL2_RES1)
#define VTTBR_X (38 - VTCR_EL2_T0SZ_40B)
#else
/*
......@@ -163,8 +162,7 @@
*/
#define VTCR_EL2_FLAGS (VTCR_EL2_TG0_4K | VTCR_EL2_SH0_INNER | \
VTCR_EL2_ORGN0_WBWA | VTCR_EL2_IRGN0_WBWA | \
VTCR_EL2_SL0_LVL1 | VTCR_EL2_T0SZ_40B | \
VTCR_EL2_RES1)
VTCR_EL2_SL0_LVL1 | VTCR_EL2_RES1)
#define VTTBR_X (37 - VTCR_EL2_T0SZ_40B)
#endif
......
arch/arm64/include/asm/kvm_asm.h
浏览文件 @ 0e0162bb
......@@ -54,7 +54,7 @@ extern void __vgic_v3_init_lrs(void);
extern u32 __kvm_get_mdcr_el2(void);
extern void __init_stage2_translation(void);
extern u32 __init_stage2_translation(void);
#endif
......
arch/arm64/include/asm/kvm_host.h
浏览文件 @ 0e0162bb
......@@ -369,11 +369,12 @@ int kvm_arm_vcpu_arch_get_attr(struct kvm_vcpu *vcpu,
int kvm_arm_vcpu_arch_has_attr(struct kvm_vcpu *vcpu,
struct kvm_device_attr *attr);
/* #define kvm_call_hyp(f, ...) __kvm_call_hyp(kvm_ksym_ref(f), ##__VA_ARGS__) */
static inline void __cpu_init_stage2(void)
{
kvm_call_hyp(__init_stage2_translation);
u32 parange = kvm_call_hyp(__init_stage2_translation);
WARN_ONCE(parange < 40,
"PARange is %d bits, unsupported configuration!", parange);
}
#endif /* __ARM64_KVM_HOST_H__ */
arch/arm64/kernel/head.S
浏览文件 @ 0e0162bb
......@@ -588,6 +588,15 @@ set_hcr:
msr vpidr_el2, x0
msr vmpidr_el2, x1
/*
* When VHE is not in use, early init of EL2 and EL1 needs to be
* done here.
* When VHE _is_ in use, EL1 will not be used in the host and
* requires no configuration, and all non-hyp-specific EL2 setup
* will be done via the _EL1 system register aliases in __cpu_setup.
*/
cbnz x2, 1f
/* sctlr_el1 */
mov x0, #0x0800 // Set/clear RES{1,0} bits
CPU_BE( movk x0, #0x33d0, lsl #16 ) // Set EE and E0E on BE systems
......@@ -597,6 +606,7 @@ CPU_LE( movk x0, #0x30d0, lsl #16 ) // Clear EE and E0E on LE systems
/* Coprocessor traps. */
mov x0, #0x33ff
msr cptr_el2, x0 // Disable copro. traps to EL2
1:
#ifdef CONFIG_COMPAT
msr hstr_el2, xzr // Disable CP15 traps to EL2
......@@ -734,7 +744,8 @@ ENDPROC(__secondary_switched)
.macro update_early_cpu_boot_status status, tmp1, tmp2
mov \tmp2, #\status
str_l \tmp2, __early_cpu_boot_status, \tmp1
adr_l \tmp1, __early_cpu_boot_status
str \tmp2, [\tmp1]
dmb sy
dc ivac, \tmp1 // Invalidate potentially stale cache line
.endm
......
arch/arm64/kernel/smp_spin_table.c
浏览文件 @ 0e0162bb
......@@ -52,6 +52,7 @@ static void write_pen_release(u64 val)
static int smp_spin_table_cpu_init(unsigned int cpu)
{
struct device_node *dn;
int ret;
dn = of_get_cpu_node(cpu, NULL);
if (!dn)
......@@ -60,15 +61,15 @@ static int smp_spin_table_cpu_init(unsigned int cpu)
/*
* Determine the address from which the CPU is polling.
*/
if (of_property_read_u64(dn, "cpu-release-addr",
&cpu_release_addr[cpu])) {
ret = of_property_read_u64(dn, "cpu-release-addr",
&cpu_release_addr[cpu]);
if (ret)
pr_err("CPU %d: missing or invalid cpu-release-addr property\n",
cpu);
return -1;
}
of_node_put(dn);
return 0;
return ret;
}
static int smp_spin_table_cpu_prepare(unsigned int cpu)
......
arch/arm64/kvm/hyp/s2-setup.c
浏览文件 @ 0e0162bb
......@@ -20,9 +20,10 @@
#include <asm/kvm_asm.h>
#include <asm/kvm_hyp.h>
void __hyp_text __init_stage2_translation(void)
u32 __hyp_text __init_stage2_translation(void)
{
u64 val = VTCR_EL2_FLAGS;
u64 parange;
u64 tmp;
/*
......@@ -30,7 +31,39 @@ void __hyp_text __init_stage2_translation(void)
* bits in VTCR_EL2. Amusingly, the PARange is 4 bits, while
* PS is only 3. Fortunately, bit 19 is RES0 in VTCR_EL2...
*/
val |= (read_sysreg(id_aa64mmfr0_el1) & 7) << 16;
parange = read_sysreg(id_aa64mmfr0_el1) & 7;
val |= parange << 16;
/* Compute the actual PARange... */
switch (parange) {
case 0:
parange = 32;
break;
case 1:
parange = 36;
break;
case 2:
parange = 40;
break;
case 3:
parange = 42;
break;
case 4:
parange = 44;
break;
case 5:
default:
parange = 48;
break;
}
/*
* ... and clamp it to 40 bits, unless we have some braindead
* HW that implements less than that. In all cases, we'll
* return that value for the rest of the kernel to decide what
* to do.
*/
val |= 64 - (parange > 40 ? 40 : parange);
/*
* Read the VMIDBits bits from ID_AA64MMFR1_EL1 and set the VS
......@@ -42,4 +75,6 @@ void __hyp_text __init_stage2_translation(void)
VTCR_EL2_VS_8BIT;
write_sysreg(val, vtcr_el2);
return parange;
}
arch/m68k/coldfire/gpio.c
浏览文件 @ 0e0162bb
......@@ -158,11 +158,6 @@ static int mcfgpio_to_irq(struct gpio_chip *chip, unsigned offset)
return -EINVAL;
}
static struct bus_type mcfgpio_subsys = {
.name = "gpio",
.dev_name = "gpio",
};
static struct gpio_chip mcfgpio_chip = {
.label = "mcfgpio",
.request = mcfgpio_request,
......@@ -178,8 +173,7 @@ static struct gpio_chip mcfgpio_chip = {
static int __init mcfgpio_sysinit(void)
{
gpiochip_add_data(&mcfgpio_chip, NULL);
return subsys_system_register(&mcfgpio_subsys, NULL);
return gpiochip_add_data(&mcfgpio_chip, NULL);
}
core_initcall(mcfgpio_sysinit);
......
arch/m68k/configs/amiga_defconfig
浏览文件 @ 0e0162bb
CONFIG_LOCALVERSION="-amiga"
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_FHANDLE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_LOG_BUF_SHIFT=16
......@@ -64,7 +63,6 @@ CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
......@@ -285,7 +283,9 @@ CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
CONFIG_NET_L3_MASTER_DEV=y
CONFIG_AF_KCM=m
# CONFIG_WIRELESS is not set
CONFIG_NET_DEVLINK=m
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
......@@ -359,6 +359,7 @@ CONFIG_MACVTAP=m
CONFIG_IPVLAN=m
CONFIG_VXLAN=m
CONFIG_GENEVE=m
CONFIG_MACSEC=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_VETH=m
......@@ -452,6 +453,7 @@ CONFIG_JFS_FS=m
CONFIG_XFS_FS=m
CONFIG_OCFS2_FS=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
CONFIG_FS_ENCRYPTION=m
CONFIG_FANOTIFY=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
......@@ -468,6 +470,7 @@ CONFIG_VFAT_FS=m
CONFIG_PROC_KCORE=y
CONFIG_PROC_CHILDREN=y
CONFIG_TMPFS=y
CONFIG_ORANGEFS_FS=m
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_ECRYPT_FS_MESSAGING=y
......@@ -549,6 +552,7 @@ CONFIG_TEST_HEXDUMP=m
CONFIG_TEST_STRING_HELPERS=m
CONFIG_TEST_KSTRTOX=m
CONFIG_TEST_PRINTF=m
CONFIG_TEST_BITMAP=m
CONFIG_TEST_RHASHTABLE=m
CONFIG_TEST_LKM=m
CONFIG_TEST_USER_COPY=m
......@@ -557,7 +561,6 @@ CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_USER=m
......@@ -565,12 +568,9 @@ CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_MCRYPTD=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_CHACHA20POLY1305=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_KEYWRAP=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
......@@ -594,7 +594,6 @@ CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_842=m
CONFIG_CRYPTO_LZ4=m
......
arch/m68k/configs/apollo_defconfig
浏览文件 @ 0e0162bb
CONFIG_LOCALVERSION="-apollo"
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_FHANDLE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_LOG_BUF_SHIFT=16
......@@ -62,7 +61,6 @@ CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
......@@ -283,7 +281,9 @@ CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
CONFIG_NET_L3_MASTER_DEV=y
CONFIG_AF_KCM=m
# CONFIG_WIRELESS is not set
CONFIG_NET_DEVLINK=m
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
......@@ -341,6 +341,7 @@ CONFIG_MACVTAP=m
CONFIG_IPVLAN=m
CONFIG_VXLAN=m
CONFIG_GENEVE=m
CONFIG_MACSEC=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_VETH=m
......@@ -411,6 +412,7 @@ CONFIG_JFS_FS=m
CONFIG_XFS_FS=m
CONFIG_OCFS2_FS=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
CONFIG_FS_ENCRYPTION=m
CONFIG_FANOTIFY=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
......@@ -427,6 +429,7 @@ CONFIG_VFAT_FS=m
CONFIG_PROC_KCORE=y
CONFIG_PROC_CHILDREN=y
CONFIG_TMPFS=y
CONFIG_ORANGEFS_FS=m
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_ECRYPT_FS_MESSAGING=y
......@@ -508,6 +511,7 @@ CONFIG_TEST_HEXDUMP=m
CONFIG_TEST_STRING_HELPERS=m
CONFIG_TEST_KSTRTOX=m
CONFIG_TEST_PRINTF=m
CONFIG_TEST_BITMAP=m
CONFIG_TEST_RHASHTABLE=m
CONFIG_TEST_LKM=m
CONFIG_TEST_USER_COPY=m
......@@ -516,7 +520,6 @@ CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_USER=m
......@@ -524,12 +527,9 @@ CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_MCRYPTD=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_CHACHA20POLY1305=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_KEYWRAP=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
......@@ -553,7 +553,6 @@ CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_842=m
CONFIG_CRYPTO_LZ4=m
......
arch/m68k/configs/atari_defconfig
浏览文件 @ 0e0162bb
此差异已折叠。
arch/m68k/configs/hp300_defconfig
浏览文件 @ 0e0162bb
此差异已折叠。
arch/m68k/configs/mac_defconfig
浏览文件 @ 0e0162bb
此差异已折叠。
arch/m68k/configs/multi_defconfig
浏览文件 @ 0e0162bb
此差异已折叠。
arch/m68k/configs/mvme147_defconfig
浏览文件 @ 0e0162bb
此差异已折叠。
arch/m68k/configs/mvme16x_defconfig
浏览文件 @ 0e0162bb
此差异已折叠。
arch/m68k/configs/q40_defconfig
浏览文件 @ 0e0162bb
此差异已折叠。
arch/m68k/configs/sun3_defconfig
浏览文件 @ 0e0162bb
此差异已折叠。
arch/m68k/configs/sun3x_defconfig
浏览文件 @ 0e0162bb
此差异已折叠。
arch/m68k/include/asm/unistd.h
浏览文件 @ 0e0162bb
此差异已折叠。
arch/m68k/include/uapi/asm/unistd.h
浏览文件 @ 0e0162bb
此差异已折叠。
arch/m68k/kernel/syscalltable.S
浏览文件 @ 0e0162bb
此差异已折叠。
arch/nios2/lib/memset.c
浏览文件 @ 0e0162bb
此差异已折叠。
arch/parisc/Kconfig
浏览文件 @ 0e0162bb
此差异已折叠。
arch/parisc/Kconfig.debug
浏览文件 @ 0e0162bb
此差异已折叠。
arch/parisc/Makefile
浏览文件 @ 0e0162bb
此差异已折叠。
arch/parisc/include/asm/ftrace.h
浏览文件 @ 0e0162bb
此差异已折叠。
arch/parisc/kernel/Makefile
浏览文件 @ 0e0162bb
此差异已折叠。
arch/parisc/kernel/entry.S
浏览文件 @ 0e0162bb
此差异已折叠。
arch/parisc/kernel/ftrace.c
浏览文件 @ 0e0162bb
此差异已折叠。
arch/parisc/kernel/head.S
浏览文件 @ 0e0162bb
此差异已折叠。
arch/parisc/kernel/syscall.S
浏览文件 @ 0e0162bb
此差异已折叠。
arch/powerpc/include/asm/systbl.h
浏览文件 @ 0e0162bb
此差异已折叠。
arch/powerpc/include/asm/unistd.h
浏览文件 @ 0e0162bb
此差异已折叠。
arch/powerpc/kernel/prom.c
浏览文件 @ 0e0162bb
此差异已折叠。
arch/s390/Kconfig
浏览文件 @ 0e0162bb
此差异已折叠。
arch/s390/include/asm/mmu.h
浏览文件 @ 0e0162bb
此差异已折叠。
arch/s390/include/asm/mmu_context.h
浏览文件 @ 0e0162bb
此差异已折叠。
arch/s390/include/asm/pci.h
浏览文件 @ 0e0162bb
此差异已折叠。
arch/s390/include/asm/pgalloc.h
浏览文件 @ 0e0162bb
此差异已折叠。
arch/s390/include/asm/processor.h
浏览文件 @ 0e0162bb
此差异已折叠。
arch/s390/include/asm/seccomp.h
浏览文件 @ 0e0162bb
此差异已折叠。
arch/s390/include/asm/tlbflush.h
浏览文件 @ 0e0162bb
此差异已折叠。
arch/s390/lib/spinlock.c
浏览文件 @ 0e0162bb
此差异已折叠。
arch/s390/mm/init.c
浏览文件 @ 0e0162bb
此差异已折叠。
arch/s390/mm/mmap.c
浏览文件 @ 0e0162bb
此差异已折叠。
arch/s390/mm/pgalloc.c
浏览文件 @ 0e0162bb
此差异已折叠。
arch/s390/pci/pci_dma.c
浏览文件 @ 0e0162bb
此差异已折叠。
arch/sh/include/asm/smp.h
浏览文件 @ 0e0162bb
此差异已折叠。
arch/sh/include/asm/topology.h
浏览文件 @ 0e0162bb
此差异已折叠。
arch/sh/kernel/cpu/sh4a/smp-shx3.c
浏览文件 @ 0e0162bb
此差异已折叠。
arch/sh/kernel/topology.c
浏览文件 @ 0e0162bb
此差异已折叠。
arch/sparc/include/asm/spitfire.h
浏览文件 @ 0e0162bb
此差异已折叠。
arch/sparc/kernel/cherrs.S
浏览文件 @ 0e0162bb
此差异已折叠。
arch/sparc/kernel/cpu.c
浏览文件 @ 0e0162bb
此差异已折叠。
arch/sparc/kernel/cpumap.c
浏览文件 @ 0e0162bb
此差异已折叠。
arch/sparc/kernel/fpu_traps.S
浏览文件 @ 0e0162bb
此差异已折叠。
arch/sparc/kernel/head_64.S
浏览文件 @ 0e0162bb
此差异已折叠。
arch/sparc/kernel/misctrap.S
浏览文件 @ 0e0162bb
此差异已折叠。
arch/sparc/kernel/pci.c
浏览文件 @ 0e0162bb
此差异已折叠。
arch/sparc/kernel/setup_64.c
浏览文件 @ 0e0162bb
此差异已折叠。
arch/sparc/kernel/spiterrs.S
浏览文件 @ 0e0162bb
此差异已折叠。
arch/sparc/kernel/systbls_32.S
浏览文件 @ 0e0162bb
此差异已折叠。
arch/sparc/kernel/systbls_64.S
浏览文件 @ 0e0162bb
此差异已折叠。
arch/sparc/kernel/utrap.S
浏览文件 @ 0e0162bb
此差异已折叠。
arch/sparc/kernel/vio.c
浏览文件 @ 0e0162bb
此差异已折叠。
arch/sparc/kernel/vmlinux.lds.S
浏览文件 @ 0e0162bb
此差异已折叠。
arch/sparc/kernel/winfixup.S
浏览文件 @ 0e0162bb
此差异已折叠。
arch/sparc/mm/init_64.c
浏览文件 @ 0e0162bb
此差异已折叠。
arch/x86/boot/compressed/Makefile
浏览文件 @ 0e0162bb
此差异已折叠。
arch/x86/boot/compressed/head_32.S
浏览文件 @ 0e0162bb
此差异已折叠。
arch/x86/boot/compressed/head_64.S
浏览文件 @ 0e0162bb
此差异已折叠。
arch/x86/crypto/sha-mb/sha1_mb.c
浏览文件 @ 0e0162bb
此差异已折叠。
arch/x86/events/amd/core.c
浏览文件 @ 0e0162bb
此差异已折叠。
arch/x86/events/amd/iommu.c
浏览文件 @ 0e0162bb
此差异已折叠。
arch/x86/events/intel/core.c
浏览文件 @ 0e0162bb
此差异已折叠。
arch/x86/events/intel/lbr.c
浏览文件 @ 0e0162bb
此差异已折叠。
arch/x86/events/intel/pt.c
浏览文件 @ 0e0162bb
此差异已折叠。
arch/x86/events/intel/pt.h
浏览文件 @ 0e0162bb
此差异已折叠。
arch/x86/events/intel/rapl.c
浏览文件 @ 0e0162bb
此差异已折叠。
arch/x86/include/asm/hugetlb.h
浏览文件 @ 0e0162bb
此差异已折叠。
arch/x86/include/asm/perf_event.h
浏览文件 @ 0e0162bb
此差异已折叠。
arch/x86/kernel/apic/vector.c
浏览文件 @ 0e0162bb
此差异已折叠。
arch/x86/kernel/apic/x2apic_uv_x.c
浏览文件 @ 0e0162bb
此差异已折叠。
arch/x86/kernel/cpu/mshyperv.c
浏览文件 @ 0e0162bb
此差异已折叠。
arch/x86/kernel/head_32.S
浏览文件 @ 0e0162bb
此差异已折叠。
arch/x86/kernel/setup.c
浏览文件 @ 0e0162bb
此差异已折叠。
arch/x86/kernel/sysfb_efi.c
浏览文件 @ 0e0162bb
此差异已折叠。
arch/x86/kernel/tsc_msr.c
浏览文件 @ 0e0162bb
此差异已折叠。
arch/x86/kvm/cpuid.c
浏览文件 @ 0e0162bb
此差异已折叠。
arch/x86/kvm/mmu.c
浏览文件 @ 0e0162bb
此差异已折叠。
arch/x86/kvm/mmu.h
浏览文件 @ 0e0162bb
此差异已折叠。
arch/x86/kvm/paging_tmpl.h
浏览文件 @ 0e0162bb
此差异已折叠。
arch/x86/kvm/vmx.c
浏览文件 @ 0e0162bb
此差异已折叠。
arch/x86/kvm/x86.c
浏览文件 @ 0e0162bb
此差异已折叠。
arch/x86/mm/setup_nx.c
浏览文件 @ 0e0162bb
此差异已折叠。
arch/x86/platform/efi/efi-bgrt.c
浏览文件 @ 0e0162bb
此差异已折叠。
arch/x86/xen/spinlock.c
浏览文件 @ 0e0162bb
此差异已折叠。
block/partition-generic.c
浏览文件 @ 0e0162bb
此差异已折叠。
crypto/rsa-pkcs1pad.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/acpi/acpica/dsmethod.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/acpi/nfit.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/ata/Kconfig
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/ata/Makefile
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/ata/ahci_platform.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/ata/ahci_seattle.c 0 → 100644
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/ata/libahci.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/base/power/opp/core.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/base/property.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/bcma/main.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/block/loop.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/block/rbd.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/bus/mvebu-mbus.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/bus/uniphier-system-bus.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/clk/imx/clk-imx6q.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/clocksource/tango_xtal.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/cpufreq/cpufreq.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/cpufreq/cpufreq_governor.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/cpufreq/intel_pstate.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/cpufreq/sti-cpufreq.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/cpuidle/cpuidle-arm.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/crypto/ccp/ccp-crypto-sha.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/crypto/talitos.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/dma/dw/core.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/dma/edma.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/dma/hsu/hsu.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/dma/hsu/hsu.h
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/dma/omap-dma.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/dma/xilinx/xilinx_vdma.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/edac/i7core_edac.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/edac/sb_edac.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/extcon/extcon-palmas.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/firmware/efi/arm-init.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/firmware/efi/vars.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/firmware/psci.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/firmware/qemu_fw_cfg.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/gpio/gpio-rcar.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/gpio/gpiolib-acpi.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/gpu/drm/amd/amdgpu/amdgpu.h
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/gpu/drm/drm_edid.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/gpu/drm/exynos/Kconfig
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/gpu/drm/exynos/Makefile
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/gpu/drm/i915/i915_drv.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/gpu/drm/i915/i915_drv.h
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/gpu/drm/i915/i915_irq.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/gpu/drm/i915/i915_reg.h
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/gpu/drm/i915/intel_ddi.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/gpu/drm/i915/intel_dp.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/gpu/drm/i915/intel_dp_mst.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/gpu/drm/i915/intel_drv.h
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/gpu/drm/i915/intel_hdmi.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/gpu/drm/i915/intel_lrc.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/gpu/drm/i915/intel_lvds.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/gpu/drm/i915/intel_pm.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/gpu/drm/i915/intel_uncore.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/gpu/drm/qxl/qxl_display.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/gpu/drm/qxl/qxl_drv.h
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/gpu/drm/radeon/evergreen.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/gpu/drm/radeon/ni_reg.h
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/gpu/drm/radeon/radeon_ttm.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/gpu/drm/radeon/si_dpm.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/gpu/drm/ttm/ttm_bo.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/gpu/drm/vmwgfx/vmwgfx_fb.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/gpu/ipu-v3/ipu-common.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/hid/hid-core.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/hid/hid-ids.h
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/hid/hid-lenovo.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/hid/hid-microsoft.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/hid/hid-multitouch.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/hid/hid-wiimote-modules.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/hid/usbhid/hid-core.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/hid/usbhid/hid-quirks.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/hid/wacom_sys.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/hid/wacom_wac.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/hid/wacom_wac.h
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/hv/ring_buffer.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/i2c/busses/Kconfig
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/i2c/busses/i2c-cpm.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/i2c/busses/i2c-exynos5.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/i2c/busses/i2c-ismt.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/i2c/busses/i2c-rk3x.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/iio/adc/at91-sama5d2_adc.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/iio/magnetometer/ak8975.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/infiniband/core/cache.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/infiniband/core/ucm.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/infiniband/core/ucma.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/infiniband/core/verbs.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/infiniband/hw/cxgb4/cq.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/infiniband/hw/cxgb4/qp.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/infiniband/hw/mlx5/main.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/infiniband/hw/nes/nes_nic.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/infiniband/sw/rdmavt/qp.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/input/joystick/xpad.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/input/misc/twl4030-vibra.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/input/misc/twl6040-vibra.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/input/tablet/gtco.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/iommu/amd_iommu.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/iommu/arm-smmu.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/irqchip/irq-mips-gic.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/isdn/mISDN/socket.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/lguest/lg.h
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/lguest/x86/core.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/mailbox/mailbox-test.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/mailbox/mailbox.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/md/dm-cache-metadata.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/md/dm.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/md/md.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/md/raid0.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/md/raid5.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/media/media-device.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/misc/cxl/context.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/misc/cxl/cxl.h
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/misc/cxl/irq.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/misc/cxl/native.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/misc/lkdtm.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/misc/mic/vop/vop_vringh.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/mmc/card/block.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/mmc/host/Kconfig
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/mmc/host/sdhci-acpi.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/mmc/host/sdhci-tegra.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/mmc/host/sunxi-mmc.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/mtd/nand/nand_base.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/net/Kconfig
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/net/dsa/mv88e6xxx.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/net/ethernet/cadence/macb.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/net/ethernet/sfc/ef10.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/net/ethernet/ti/cpsw.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/net/ethernet/ti/cpsw.h
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/net/macsec.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/net/phy/at803x.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/net/phy/spi_ks8995.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/net/usb/cdc_mbim.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/net/usb/lan78xx.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/net/usb/pegasus.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/net/usb/smsc75xx.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/net/usb/smsc95xx.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/net/vmxnet3/vmxnet3_drv.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/net/vmxnet3/vmxnet3_int.h
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/net/vrf.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/nvdimm/pmem.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/nvme/host/pci.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/nvmem/mxs-ocotp.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/pci/access.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/pci/host/pci-imx6.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/pci/pci-sysfs.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/pci/pci.h
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/perf/arm_pmu.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/phy/phy-rockchip-dp.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/phy/phy-rockchip-emmc.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/pinctrl/freescale/Kconfig
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/pinctrl/pinctrl-single.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/platform/x86/hp_accel.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/platform/x86/intel-hid.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/platform/x86/toshiba_acpi.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/pwm/pwm-fsl-ftm.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/rtc/rtc-ds1307.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/s390/block/dcssblk.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/s390/block/scm_blk.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/s390/char/sclp_ctl.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/scsi/cxgbi/libcxgbi.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/soc/mediatek/mtk-scpsys.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/staging/rdma/hfi1/TODO
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/staging/rdma/hfi1/mmu_rb.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/staging/rdma/hfi1/mmu_rb.h
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/staging/rdma/hfi1/qp.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/thermal/Kconfig
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/thermal/hisi_thermal.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/thermal/mtk_thermal.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/thermal/of-thermal.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/thermal/power_allocator.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/thermal/thermal_core.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/tty/pty.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/tty/serial/8250/8250_port.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/tty/serial/8250/Kconfig
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/tty/serial/uartlite.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/tty/tty_io.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/usb/class/cdc-acm.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/usb/core/hcd-pci.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/usb/core/port.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/usb/core/usb.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/usb/dwc3/core.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/usb/dwc3/debugfs.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/usb/dwc3/dwc3-omap.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/usb/dwc3/gadget.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/usb/gadget/composite.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/usb/gadget/function/f_fs.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/usb/host/xhci-mem.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/usb/host/xhci-pci.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/usb/host/xhci-plat.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/usb/host/xhci-plat.h
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/usb/host/xhci-ring.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/usb/host/xhci.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/usb/host/xhci.h
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/usb/musb/jz4740.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/usb/musb/musb_gadget.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/usb/musb/musb_host.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/usb/serial/cp210x.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/usb/storage/uas.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/usb/storage/unusual_uas.h
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/usb/storage/usb.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/video/fbdev/amba-clcd.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/virtio/virtio_ring.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/xen/balloon.c
浏览文件 @ 0e0162bb
此差异已折叠。
drivers/xen/evtchn.c
浏览文件 @ 0e0162bb
此差异已折叠。
fs/ceph/mds_client.c
浏览文件 @ 0e0162bb
此差异已折叠。
fs/crypto/crypto.c
浏览文件 @ 0e0162bb
此差异已折叠。
fs/debugfs/inode.c
浏览文件 @ 0e0162bb
此差异已折叠。
fs/devpts/inode.c
浏览文件 @ 0e0162bb
此差异已折叠。
fs/ext4/crypto.c
浏览文件 @ 0e0162bb
此差异已折叠。
fs/f2fs/data.c
浏览文件 @ 0e0162bb
此差异已折叠。
fs/f2fs/file.c
浏览文件 @ 0e0162bb
此差异已折叠。
fs/fuse/file.c
浏览文件 @ 0e0162bb
此差异已折叠。
fs/namei.c
浏览文件 @ 0e0162bb
此差异已折叠。
fs/ocfs2/dlm/dlmmaster.c
浏览文件 @ 0e0162bb
此差异已折叠。
fs/open.c
浏览文件 @ 0e0162bb
此差异已折叠。
fs/overlayfs/super.c
浏览文件 @ 0e0162bb
此差异已折叠。
fs/pnode.c
浏览文件 @ 0e0162bb
此差异已折叠。
fs/proc/base.c
浏览文件 @ 0e0162bb
此差异已折叠。
fs/proc/task_mmu.c
浏览文件 @ 0e0162bb
此差异已折叠。
fs/seq_file.c
浏览文件 @ 0e0162bb
此差异已折叠。
fs/udf/super.c
浏览文件 @ 0e0162bb
此差异已折叠。
fs/udf/udfdecl.h
浏览文件 @ 0e0162bb
此差异已折叠。
fs/udf/unicode.c
浏览文件 @ 0e0162bb
此差异已折叠。
include/acpi/acpi_bus.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/asm-generic/futex.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/drm/drm_cache.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/linux/bpf.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/linux/ceph/auth.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/linux/ceph/osd_client.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/linux/cgroup-defs.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/linux/cpuset.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/linux/dcache.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/linux/devpts_fs.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/linux/fscrypto.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/linux/hash.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/linux/huge_mm.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/linux/if_ether.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/linux/lockdep.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/linux/mlx4/device.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/linux/mlx5/device.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/linux/mlx5/driver.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/linux/mlx5/port.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/linux/mlx5/vport.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/linux/mm.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/linux/namei.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/linux/net.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/linux/netdevice.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/linux/of.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/linux/page-flags.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/linux/pci.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/linux/pmem.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/linux/rculist_nulls.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/linux/seq_file.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/linux/swap.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/linux/thermal.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/linux/tty_driver.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/linux/usb_usual.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/media/videobuf2-core.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/net/cls_cgroup.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/net/ip6_route.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/net/ipv6.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/net/route.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/net/sctp/structs.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/net/sock.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/net/switchdev.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/net/tcp.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/net/vxlan.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/rdma/ib.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/sound/hda_i915.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/sound/hda_regmap.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/uapi/asm-generic/unistd.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/uapi/linux/Kbuild
浏览文件 @ 0e0162bb
此差异已折叠。
include/uapi/linux/if_macsec.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/uapi/linux/swab.h
浏览文件 @ 0e0162bb
此差异已折叠。
include/xen/page.h
浏览文件 @ 0e0162bb
此差异已折叠。
kernel/bpf/inode.c
浏览文件 @ 0e0162bb
此差异已折叠。
kernel/bpf/syscall.c
浏览文件 @ 0e0162bb
此差异已折叠。
kernel/bpf/verifier.c
浏览文件 @ 0e0162bb
此差异已折叠。
kernel/cgroup.c
浏览文件 @ 0e0162bb
此差异已折叠。
kernel/cpu.c
浏览文件 @ 0e0162bb
此差异已折叠。
kernel/cpuset.c
浏览文件 @ 0e0162bb
此差异已折叠。
kernel/events/core.c
浏览文件 @ 0e0162bb
此差异已折叠。
kernel/futex.c
浏览文件 @ 0e0162bb
此差异已折叠。
kernel/irq/ipi.c
浏览文件 @ 0e0162bb
此差异已折叠。
kernel/kcov.c
浏览文件 @ 0e0162bb
此差异已折叠。
kernel/kexec_core.c
浏览文件 @ 0e0162bb
此差异已折叠。
kernel/locking/lockdep.c
浏览文件 @ 0e0162bb
此差异已折叠。
kernel/locking/lockdep_proc.c
浏览文件 @ 0e0162bb
此差异已折叠。
kernel/locking/qspinlock_stat.h
浏览文件 @ 0e0162bb
此差异已折叠。
kernel/resource.c
浏览文件 @ 0e0162bb
此差异已折叠。
kernel/sched/core.c
浏览文件 @ 0e0162bb
此差异已折叠。
kernel/trace/trace_events.c
浏览文件 @ 0e0162bb
此差异已折叠。
kernel/workqueue.c
浏览文件 @ 0e0162bb
此差异已折叠。
lib/assoc_array.c
浏览文件 @ 0e0162bb
此差异已折叠。
lib/lz4/lz4defs.h
浏览文件 @ 0e0162bb
此差异已折叠。
lib/stackdepot.c
浏览文件 @ 0e0162bb
此差异已折叠。
mm/backing-dev.c
浏览文件 @ 0e0162bb
此差异已折叠。
mm/compaction.c
浏览文件 @ 0e0162bb
此差异已折叠。
mm/gup.c
浏览文件 @ 0e0162bb
此差异已折叠。
mm/huge_memory.c
浏览文件 @ 0e0162bb
此差异已折叠。
mm/memcontrol.c
浏览文件 @ 0e0162bb
此差异已折叠。
mm/memory-failure.c
浏览文件 @ 0e0162bb
此差异已折叠。
mm/memory.c
浏览文件 @ 0e0162bb
此差异已折叠。
mm/migrate.c
浏览文件 @ 0e0162bb
此差异已折叠。
mm/nommu.c
浏览文件 @ 0e0162bb
此差异已折叠。
mm/page-writeback.c
浏览文件 @ 0e0162bb
此差异已折叠。
mm/page_alloc.c
浏览文件 @ 0e0162bb
此差异已折叠。
mm/page_io.c
浏览文件 @ 0e0162bb
此差异已折叠。
mm/swap.c
浏览文件 @ 0e0162bb
此差异已折叠。
mm/vmscan.c
浏览文件 @ 0e0162bb
此差异已折叠。
mm/zswap.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/batman-adv/bat_v.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/batman-adv/hard-interface.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/batman-adv/originator.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/batman-adv/routing.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/batman-adv/send.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/batman-adv/soft-interface.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/batman-adv/translation-table.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/batman-adv/types.h
浏览文件 @ 0e0162bb
此差异已折叠。
net/bridge/br_mdb.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/bridge/br_multicast.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/bridge/br_private.h
浏览文件 @ 0e0162bb
此差异已折叠。
net/bridge/netfilter/ebtables.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/ceph/auth.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/ceph/auth_none.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/ceph/auth_none.h
浏览文件 @ 0e0162bb
此差异已折叠。
net/ceph/auth_x.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/ceph/auth_x.h
浏览文件 @ 0e0162bb
此差异已折叠。
net/ceph/osd_client.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/core/dev.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/core/skbuff.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/decnet/dn_route.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/ipv4/fib_frontend.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/ipv4/inet_hashtables.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/ipv4/ip_gre.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/ipv4/ip_tunnel.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/ipv4/route.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/ipv4/tcp_input.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/ipv4/tcp_output.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/ipv4/udp.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/ipv6/addrconf.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/ipv6/datagram.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/ipv6/ila/ila_lwt.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/ipv6/route.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/ipv6/udp.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/l2tp/l2tp_core.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/mac80211/iface.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/netlink/af_netlink.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/openvswitch/actions.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/openvswitch/conntrack.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/packet/af_packet.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/rds/cong.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/rds/ib_cm.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/rds/tcp.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/rds/tcp.h
浏览文件 @ 0e0162bb
此差异已折叠。
net/rds/tcp_connect.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/rds/tcp_listen.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/sched/sch_generic.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/sched/sch_netem.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/sctp/outqueue.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/sctp/sm_make_chunk.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/sctp/sm_sideeffect.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/sctp/transport.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/sunrpc/auth_gss/gss_krb5_mech.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/switchdev/switchdev.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/tipc/core.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/tipc/core.h
浏览文件 @ 0e0162bb
此差异已折叠。
net/tipc/name_distr.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/tipc/node.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/vmw_vsock/vmci_transport.c
浏览文件 @ 0e0162bb
此差异已折叠。
net/wireless/nl80211.c
浏览文件 @ 0e0162bb
此差异已折叠。
samples/bpf/trace_output_kern.c
浏览文件 @ 0e0162bb
此差异已折叠。
scripts/asn1_compiler.c
浏览文件 @ 0e0162bb
此差异已折叠。
scripts/mod/file2alias.c
浏览文件 @ 0e0162bb
此差异已折叠。
security/integrity/ima/ima_policy.c
浏览文件 @ 0e0162bb
此差异已折叠。
sound/hda/ext/hdac_ext_stream.c
浏览文件 @ 0e0162bb
此差异已折叠。
sound/hda/hdac_device.c
浏览文件 @ 0e0162bb
此差异已折叠。
sound/hda/hdac_i915.c
浏览文件 @ 0e0162bb
此差异已折叠。
sound/hda/hdac_regmap.c
浏览文件 @ 0e0162bb
此差异已折叠。
sound/isa/sscape.c
浏览文件 @ 0e0162bb
此差异已折叠。
sound/pci/hda/hda_generic.c
浏览文件 @ 0e0162bb
此差异已折叠。
sound/pci/hda/hda_intel.c
浏览文件 @ 0e0162bb
此差异已折叠。
sound/pci/hda/patch_cirrus.c
浏览文件 @ 0e0162bb
此差异已折叠。
sound/pci/hda/patch_hdmi.c
浏览文件 @ 0e0162bb
此差异已折叠。
sound/pci/hda/patch_realtek.c
浏览文件 @ 0e0162bb
此差异已折叠。
sound/pci/pcxhr/pcxhr_core.c
浏览文件 @ 0e0162bb
此差异已折叠。
sound/soc/codecs/Kconfig
浏览文件 @ 0e0162bb
此差异已折叠。
sound/soc/codecs/arizona.c
浏览文件 @ 0e0162bb
此差异已折叠。
sound/soc/codecs/arizona.h
浏览文件 @ 0e0162bb
此差异已折叠。
sound/soc/codecs/cs35l32.c
浏览文件 @ 0e0162bb
此差异已折叠。
sound/soc/codecs/cs47l24.c
浏览文件 @ 0e0162bb
此差异已折叠。
sound/soc/codecs/hdac_hdmi.c
浏览文件 @ 0e0162bb
此差异已折叠。
sound/soc/codecs/nau8825.c
浏览文件 @ 0e0162bb
此差异已折叠。
sound/soc/codecs/rt5640.c
浏览文件 @ 0e0162bb
此差异已折叠。
sound/soc/codecs/rt5640.h
浏览文件 @ 0e0162bb
此差异已折叠。
sound/soc/codecs/wm5102.c
浏览文件 @ 0e0162bb
此差异已折叠。
sound/soc/codecs/wm5110.c
浏览文件 @ 0e0162bb
此差异已折叠。
sound/soc/codecs/wm8962.c
浏览文件 @ 0e0162bb
此差异已折叠。
sound/soc/codecs/wm8997.c
浏览文件 @ 0e0162bb
此差异已折叠。
sound/soc/codecs/wm8998.c
浏览文件 @ 0e0162bb
此差异已折叠。
sound/soc/intel/Kconfig
浏览文件 @ 0e0162bb
此差异已折叠。
sound/soc/intel/skylake/skl.c
浏览文件 @ 0e0162bb
此差异已折叠。
sound/soc/soc-dapm.c
浏览文件 @ 0e0162bb
此差异已折叠。
sound/usb/mixer_maps.c
浏览文件 @ 0e0162bb
此差异已折叠。
sound/usb/quirks.c
浏览文件 @ 0e0162bb
此差异已折叠。
tools/objtool/builtin-check.c
浏览文件 @ 0e0162bb
此差异已折叠。
tools/perf/util/intel-pt.c
浏览文件 @ 0e0162bb
此差异已折叠。
tools/testing/selftests/net/reuseport_dualstack.c 0 → 100644
浏览文件 @ 0e0162bb
此差异已折叠。
virt/kvm/arm/arch_timer.c
浏览文件 @ 0e0162bb
此差异已折叠。
virt/kvm/arm/pmu.c
浏览文件 @ 0e0162bb
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或