提交 0dde1a1d 编写于 作者: S Scott Wood 提交者: Kumar Gala

[POWERPC] 82xx: Embedded Planet EP8248E support

This board is also resold by Freescale under the names
"QUICCStart MPC8248 Evaluation System" and "CWH-PPC-8248N-VE".
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
上级 b09c1644
......@@ -62,7 +62,7 @@ src-plat := of.c cuboot-52xx.c cuboot-83xx.c cuboot-85xx.c holly.c \
ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c cuboot-bamboo.c \
fixed-head.S ep88xc.c cuboot-hpc2.c ep405.c cuboot-taishan.c \
cuboot-katmai.c cuboot-rainier.c redboot-8xx.c
cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c
src-boot := $(src-wlib) $(src-plat) empty.c
src-boot := $(addprefix $(obj)/, $(src-boot))
......@@ -195,6 +195,7 @@ image-$(CONFIG_PPC_8xx) += cuImage.8xx
image-$(CONFIG_PPC_EP88XC) += zImage.ep88xc
image-$(CONFIG_EP405) += zImage.ep405
image-$(CONFIG_8260) += cuImage.pq2
image-$(CONFIG_EP8248E) += zImage.ep8248e
image-$(CONFIG_PPC_MPC52xx) += cuImage.52xx
image-$(CONFIG_PPC_83xx) += cuImage.83xx
image-$(CONFIG_PPC_85xx) += cuImage.85xx
......
/*
* Device Tree for the Embedded Planet EP8248E board running PlanetCore.
*
* Copyright 2007 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/dts-v1/;
/ {
model = "EP8248E";
compatible = "fsl,ep8248e";
#address-cells = <1>;
#size-cells = <1>;
aliases {
planetcore-SMC1 = &smc1;
planetcore-SCC1 = &scc1;
ethernet0 = &eth0;
ethernet1 = &eth1;
serial0 = &smc1;
serial1 = &scc1;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8248@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <32>;
i-cache-line-size = <32>;
d-cache-size = <16384>;
i-cache-size = <16384>;
timebase-frequency = <0>;
clock-frequency = <0>;
};
};
localbus@f0010100 {
compatible = "fsl,mpc8248-localbus",
"fsl,pq2-localbus",
"simple-bus";
#address-cells = <2>;
#size-cells = <1>;
reg = <0xf0010100 0x40>;
ranges = <0 0 0xfc000000 0x04000000
1 0 0xfa000000 0x00008000>;
flash@0,3800000 {
compatible = "cfi-flash";
reg = <0 0x3800000 0x800000>;
bank-width = <4>;
device-width = <2>;
};
bcsr@1,0 {
#address-cells = <2>;
#size-cells = <1>;
reg = <1 0 0x10>;
compatible = "fsl,ep8248e-bcsr";
ranges;
mdio {
device_type = "mdio";
compatible = "fsl,ep8248e-mdio-bitbang";
#address-cells = <1>;
#size-cells = <0>;
reg = <1 8 1>;
PHY0: ethernet-phy@0 {
interrupt-parent = <&PIC>;
reg = <0>;
device_type = "ethernet-phy";
};
PHY1: ethernet-phy@1 {
interrupt-parent = <&PIC>;
reg = <1>;
device_type = "ethernet-phy";
};
};
};
};
memory {
device_type = "memory";
reg = <0 0>;
};
soc@f0000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8248-immr", "fsl,pq2-soc", "simple-bus";
ranges = <0x00000000 0xf0000000 0x00053000>;
// Temporary until code stops depending on it.
device_type = "soc";
// Temporary -- will go away once kernel uses ranges for get_immrbase().
reg = <0xf0000000 0x00053000>;
cpm@119c0 {
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
compatible = "fsl,mpc8248-cpm", "fsl,cpm2",
"simple-bus";
reg = <0x119c0 0x30>;
ranges;
muram {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0x10000>;
data@0 {
compatible = "fsl,cpm-muram-data";
reg = <0 0x1100 0x1140
0xec0 0x9800 0x800>;
};
};
brg@119f0 {
compatible = "fsl,mpc8248-brg",
"fsl,cpm2-brg",
"fsl,cpm-brg";
reg = <0x119f0 0x10 0x115f0 0x10>;
};
/* Monitor port/SMC1 */
smc1: serial@11a80 {
device_type = "serial";
compatible = "fsl,mpc8248-smc-uart",
"fsl,cpm2-smc-uart";
reg = <0x11a80 0x20 0x1100 0x40>;
interrupts = <4 8>;
interrupt-parent = <&PIC>;
fsl,cpm-brg = <7>;
fsl,cpm-command = <0x1d000000>;
linux,planetcore-label = "SMC1";
};
/* "Serial" port/SCC1 */
scc1: serial@11a00 {
device_type = "serial";
compatible = "fsl,mpc8248-scc-uart",
"fsl,cpm2-scc-uart";
reg = <0x11a00 0x20 0x8000 0x100>;
interrupts = <40 8>;
interrupt-parent = <&PIC>;
fsl,cpm-brg = <1>;
fsl,cpm-command = <0x00800000>;
linux,planetcore-label = "SCC1";
};
eth0: ethernet@11300 {
device_type = "network";
compatible = "fsl,mpc8248-fcc-enet",
"fsl,cpm2-fcc-enet";
reg = <0x11300 0x20 0x8400 0x100 0x11390 1>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 8>;
interrupt-parent = <&PIC>;
phy-handle = <&PHY0>;
linux,network-index = <0>;
fsl,cpm-command = <0x12000300>;
};
eth1: ethernet@11320 {
device_type = "network";
compatible = "fsl,mpc8248-fcc-enet",
"fsl,cpm2-fcc-enet";
reg = <0x11320 0x20 0x8500 0x100 0x113b0 1>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <33 8>;
interrupt-parent = <&PIC>;
phy-handle = <&PHY1>;
linux,network-index = <1>;
fsl,cpm-command = <0x16200300>;
};
usb@11b60 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc8248-usb",
"fsl,cpm2-usb";
reg = <0x11b60 0x18 0x8b00 0x100>;
interrupt-parent = <&PIC>;
interrupts = <11 8>;
fsl,cpm-command = <0x2e600000>;
};
};
PIC: interrupt-controller@10c00 {
#interrupt-cells = <2>;
interrupt-controller;
reg = <0x10c00 0x80>;
compatible = "fsl,mpc8248-pic", "fsl,pq2-pic";
};
};
};
/*
* Embedded Planet EP8248E with PlanetCore firmware
*
* Author: Scott Wood <scottwood@freescale.com>
*
* Copyright (c) 2007 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include "ops.h"
#include "stdio.h"
#include "planetcore.h"
#include "pq2.h"
static char *table;
static u64 mem_size;
#include <io.h>
static void platform_fixups(void)
{
u64 val;
dt_fixup_memory(0, mem_size);
planetcore_set_mac_addrs(table);
if (!planetcore_get_decimal(table, PLANETCORE_KEY_CRYSTAL_HZ, &val)) {
printf("No PlanetCore crystal frequency key.\r\n");
return;
}
pq2_fixup_clocks(val);
}
void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7)
{
table = (char *)r3;
planetcore_prepare_table(table);
if (!planetcore_get_decimal(table, PLANETCORE_KEY_MB_RAM, &mem_size))
return;
mem_size *= 1024 * 1024;
simple_alloc_init(_end, mem_size - (unsigned long)_end, 32, 64);
fdt_init(_dtb_start);
planetcore_set_stdout_path(table);
serial_console_init();
platform_ops.fixups = platform_fixups;
}
......@@ -168,7 +168,7 @@ ps3)
ksection=.kernel:vmlinux.bin
isection=.kernel:initrd
;;
ep88xc|ep405|redboot*)
ep88xc|ep405|redboot*|ep8248e)
platformo="$object/fixed-head.o $object/$platform.o"
binary=y
;;
......
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc6
# Fri Jan 11 14:02:06 2008
#
# CONFIG_PPC64 is not set
#
# Processor support
#
CONFIG_6xx=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_FPU=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_PPC_UDBG_16550 is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
#
# Platform support
#
# CONFIG_PPC_MULTIPLATFORM is not set
CONFIG_PPC_82xx=y
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_PPC_MPC52xx is not set
# CONFIG_PPC_MPC5200 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_MPC8272_ADS is not set
# CONFIG_PQ2FADS is not set
CONFIG_EP8248E=y
# CONFIG_PQ2ADS is not set
CONFIG_8260=y
CONFIG_8272=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
CONFIG_CPM2=y
CONFIG_PPC_CPM_NEW_BINDING=y
# CONFIG_FSL_ULI1575 is not set
CONFIG_CPM=y
#
# Kernel options
#
# CONFIG_HIGHMEM is not set
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
CONFIG_SUSPEND_UP_POSSIBLE=y
CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
CONFIG_WANT_DEVICE_TREE=y
CONFIG_DEVICE_TREE="ep8248e.dts"
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_ZONE_DMA=y
CONFIG_FSL_SOC=y
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_BOOT_LOAD=0x00400000
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IP_VS is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_NF_CONNTRACK_ENABLED is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
# CONFIG_MTD_PARTITIONS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
# CONFIG_MTD_CFI_I1 is not set
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_OTP is not set
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_PHYSMAP_OF=y
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
CONFIG_DAVICOM_PHY=y
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_FIXED_PHY is not set
CONFIG_MDIO_BITBANG=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_B44 is not set
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
CONFIG_FS_ENET_HAS_FCC=y
# CONFIG_FS_ENET_MDIO_FCC is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
# CONFIG_INPUT is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
CONFIG_SERIAL_CPM_SCC1=y
# CONFIG_SERIAL_CPM_SCC2 is not set
# CONFIG_SERIAL_CPM_SCC3 is not set
CONFIG_SERIAL_CPM_SCC4=y
# CONFIG_SERIAL_CPM_SMC1 is not set
# CONFIG_SERIAL_CPM_SMC2 is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_WATCHDOG is not set
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
CONFIG_DAB=y
#
# Graphics support
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_CLASS is not set
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
#
# Miscellaneous filesystems
#
# CONFIG_HFSPLUS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_UCC_SLOW is not set
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
# CONFIG_KGDB_CONSOLE is not set
CONFIG_BDI_SWITCH=y
# CONFIG_PPC_EARLY_DEBUG is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
......@@ -26,6 +26,19 @@ config PQ2FADS
help
This option enables support for the PQ2FADS board
config EP8248E
bool "Embedded Planet EP8248E (a.k.a. CWH-PPC-8248N-VE)"
select 8272
select 8260
select FSL_SOC
select PPC_CPM_NEW_BINDING
select MDIO_BITBANG
help
This enables support for the Embedded Planet EP8248E board.
This board is also resold by Freescale as the QUICCStart
MPC8248 Evaluation System and/or the CWH-PPC-8248N-VE.
endchoice
config PQ2ADS
......
......@@ -5,3 +5,4 @@ obj-$(CONFIG_MPC8272_ADS) += mpc8272_ads.o
obj-$(CONFIG_CPM2) += pq2.o
obj-$(CONFIG_PQ2_ADS_PCI_PIC) += pq2ads-pci-pic.o
obj-$(CONFIG_PQ2FADS) += pq2fads.o
obj-$(CONFIG_EP8248E) += ep8248e.o
/*
* Embedded Planet EP8248E support
*
* Copyright 2007 Freescale Semiconductor, Inc.
* Author: Scott Wood <scottwood@freescale.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/fsl_devices.h>
#include <linux/mdio-bitbang.h>
#include <linux/of_platform.h>
#include <asm/io.h>
#include <asm/cpm2.h>
#include <asm/udbg.h>
#include <asm/machdep.h>
#include <asm/time.h>
#include <asm/mpc8260.h>
#include <asm/prom.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/cpm2_pic.h>
#include "pq2.h"
static u8 __iomem *ep8248e_bcsr;
static struct device_node *ep8248e_bcsr_node;
#define BCSR7_SCC2_ENABLE 0x10
#define BCSR8_PHY1_ENABLE 0x80
#define BCSR8_PHY1_POWER 0x40
#define BCSR8_PHY2_ENABLE 0x20
#define BCSR8_PHY2_POWER 0x10
#define BCSR8_MDIO_READ 0x04
#define BCSR8_MDIO_CLOCK 0x02
#define BCSR8_MDIO_DATA 0x01
#define BCSR9_USB_ENABLE 0x80
#define BCSR9_USB_POWER 0x40
#define BCSR9_USB_HOST 0x20
#define BCSR9_USB_FULL_SPEED_TARGET 0x10
static void __init ep8248e_pic_init(void)
{
struct device_node *np = of_find_compatible_node(NULL, NULL, "fsl,pq2-pic");
if (!np) {
printk(KERN_ERR "PIC init: can not find cpm-pic node\n");
return;
}
cpm2_pic_init(np);
of_node_put(np);
}
static void ep8248e_set_mdc(struct mdiobb_ctrl *ctrl, int level)
{
if (level)
setbits8(&ep8248e_bcsr[8], BCSR8_MDIO_CLOCK);
else
clrbits8(&ep8248e_bcsr[8], BCSR8_MDIO_CLOCK);
/* Read back to flush the write. */
in_8(&ep8248e_bcsr[8]);
}
static void ep8248e_set_mdio_dir(struct mdiobb_ctrl *ctrl, int output)
{
if (output)
clrbits8(&ep8248e_bcsr[8], BCSR8_MDIO_READ);
else
setbits8(&ep8248e_bcsr[8], BCSR8_MDIO_READ);
/* Read back to flush the write. */
in_8(&ep8248e_bcsr[8]);
}
static void ep8248e_set_mdio_data(struct mdiobb_ctrl *ctrl, int data)
{
if (data)
setbits8(&ep8248e_bcsr[8], BCSR8_MDIO_DATA);
else
clrbits8(&ep8248e_bcsr[8], BCSR8_MDIO_DATA);
/* Read back to flush the write. */
in_8(&ep8248e_bcsr[8]);
}
static int ep8248e_get_mdio_data(struct mdiobb_ctrl *ctrl)
{
return in_8(&ep8248e_bcsr[8]) & BCSR8_MDIO_DATA;
}
static const struct mdiobb_ops ep8248e_mdio_ops = {
.set_mdc = ep8248e_set_mdc,
.set_mdio_dir = ep8248e_set_mdio_dir,
.set_mdio_data = ep8248e_set_mdio_data,
.get_mdio_data = ep8248e_get_mdio_data,
.owner = THIS_MODULE,
};
static struct mdiobb_ctrl ep8248e_mdio_ctrl = {
.ops = &ep8248e_mdio_ops,
};
static int __devinit ep8248e_mdio_probe(struct of_device *ofdev,
const struct of_device_id *match)
{
struct mii_bus *bus;
struct resource res;
struct device_node *node;
int ret, i;
node = of_get_parent(ofdev->node);
of_node_put(node);
if (node != ep8248e_bcsr_node)
return -ENODEV;
ret = of_address_to_resource(ofdev->node, 0, &res);
if (ret)
return ret;
bus = alloc_mdio_bitbang(&ep8248e_mdio_ctrl);
if (!bus)
return -ENOMEM;
bus->phy_mask = 0;
bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
for (i = 0; i < PHY_MAX_ADDR; i++)
bus->irq[i] = -1;
bus->name = "ep8248e-mdio-bitbang";
bus->dev = &ofdev->dev;
bus->id = res.start;
return mdiobus_register(bus);
}
static int ep8248e_mdio_remove(struct of_device *ofdev)
{
BUG();
return 0;
}
static const struct of_device_id ep8248e_mdio_match[] = {
{
.compatible = "fsl,ep8248e-mdio-bitbang",
},
{},
};
static struct of_platform_driver ep8248e_mdio_driver = {
.driver = {
.name = "ep8248e-mdio-bitbang",
},
.match_table = ep8248e_mdio_match,
.probe = ep8248e_mdio_probe,
.remove = ep8248e_mdio_remove,
};
struct cpm_pin {
int port, pin, flags;
};
static __initdata struct cpm_pin ep8248e_pins[] = {
/* SMC1 */
{2, 4, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{2, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
/* SCC1 */
{2, 14, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{2, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
{3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
/* FCC1 */
{0, 14, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{0, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{0, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{0, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{0, 18, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{0, 19, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{0, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{0, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{0, 26, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
{0, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
{0, 28, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
{0, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
{0, 30, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
{0, 31, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
{2, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{2, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
/* FCC2 */
{1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
{1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
/* I2C */
{4, 14, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
{4, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
/* USB */
{2, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{2, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{2, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{2, 24, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{3, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{3, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{3, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
};
static void __init init_ioports(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(ep8248e_pins); i++) {
const struct cpm_pin *pin = &ep8248e_pins[i];
cpm2_set_pin(pin->port, pin->pin, pin->flags);
}
cpm2_smc_clk_setup(CPM_CLK_SMC1, CPM_BRG7);
cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
cpm2_clk_setup(CPM_CLK_SCC3, CPM_CLK8, CPM_CLK_TX); /* USB */
cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK11, CPM_CLK_RX);
cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK10, CPM_CLK_TX);
cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX);
cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX);
}
static void __init ep8248e_setup_arch(void)
{
if (ppc_md.progress)
ppc_md.progress("ep8248e_setup_arch()", 0);
cpm2_reset();
/* When this is set, snooping CPM DMA from RAM causes
* machine checks. See erratum SIU18.
*/
clrbits32(&cpm2_immr->im_siu_conf.siu_82xx.sc_bcr, MPC82XX_BCR_PLDP);
ep8248e_bcsr_node =
of_find_compatible_node(NULL, NULL, "fsl,ep8248e-bcsr");
if (!ep8248e_bcsr_node) {
printk(KERN_ERR "No bcsr in device tree\n");
return;
}
ep8248e_bcsr = of_iomap(ep8248e_bcsr_node, 0);
if (!ep8248e_bcsr) {
printk(KERN_ERR "Cannot map BCSR registers\n");
of_node_put(ep8248e_bcsr_node);
ep8248e_bcsr_node = NULL;
return;
}
setbits8(&ep8248e_bcsr[7], BCSR7_SCC2_ENABLE);
setbits8(&ep8248e_bcsr[8], BCSR8_PHY1_ENABLE | BCSR8_PHY1_POWER |
BCSR8_PHY2_ENABLE | BCSR8_PHY2_POWER);
init_ioports();
if (ppc_md.progress)
ppc_md.progress("ep8248e_setup_arch(), finish", 0);
}
static __initdata struct of_device_id of_bus_ids[] = {
{ .compatible = "simple-bus", },
{ .compatible = "fsl,ep8248e-bcsr", },
{},
};
static int __init declare_of_platform_devices(void)
{
of_platform_bus_probe(NULL, of_bus_ids, NULL);
of_register_platform_driver(&ep8248e_mdio_driver);
return 0;
}
machine_device_initcall(ep8248e, declare_of_platform_devices);
/*
* Called very early, device-tree isn't unflattened
*/
static int __init ep8248e_probe(void)
{
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "fsl,ep8248e");
}
define_machine(ep8248e)
{
.name = "Embedded Planet EP8248E",
.probe = ep8248e_probe,
.setup_arch = ep8248e_setup_arch,
.init_IRQ = ep8248e_pic_init,
.get_irq = cpm2_get_irq,
.calibrate_decr = generic_calibrate_decr,
.restart = pq2_restart,
.progress = udbg_progress,
};
......@@ -8,6 +8,7 @@
#ifndef __ASM_POWERPC_MPC8260_H__
#define __ASM_POWERPC_MPC8260_H__
#define MPC82XX_BCR_PLDP 0x00800000 /* Pipeline Maximum Depth */
#ifdef CONFIG_8260
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册