提交 0d256c0e 编写于 作者: H Hadar Hen Zion 提交者: David S. Miller

net/mlx4_en: Fix ethtool rules leftovers after module unloaded

As part of the driver unload flow, all steering rules must be deleted,
make sure to remove the rules that were set through ethtool.
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 280fce1e
......@@ -915,6 +915,7 @@ static int mlx4_en_flow_replace(struct net_device *dev,
loc_rule->id = 0;
memset(&loc_rule->flow_spec, 0,
sizeof(struct ethtool_rx_flow_spec));
list_del(&loc_rule->list);
}
err = mlx4_flow_attach(priv->mdev->dev, &rule, &reg_id);
if (err) {
......@@ -925,6 +926,7 @@ static int mlx4_en_flow_replace(struct net_device *dev,
loc_rule->id = reg_id;
memcpy(&loc_rule->flow_spec, &cmd->fs,
sizeof(struct ethtool_rx_flow_spec));
list_add_tail(&loc_rule->list, &priv->ethtool_list);
out_free_list:
list_for_each_entry_safe(spec, tmp_spec, &rule.list, list) {
......@@ -958,6 +960,7 @@ static int mlx4_en_flow_detach(struct net_device *dev,
}
rule->id = 0;
memset(&rule->flow_spec, 0, sizeof(struct ethtool_rx_flow_spec));
list_del(&rule->list);
out:
return err;
......
......@@ -1039,6 +1039,9 @@ int mlx4_en_start_port(struct net_device *dev)
INIT_LIST_HEAD(&priv->mc_list);
INIT_LIST_HEAD(&priv->curr_list);
INIT_LIST_HEAD(&priv->ethtool_list);
memset(&priv->ethtool_rules[0], 0,
sizeof(struct ethtool_flow_id) * MAX_NUM_OF_FS_RULES);
/* Calculate Rx buf size */
dev->mtu = min(dev->mtu, priv->max_mtu);
......@@ -1202,6 +1205,7 @@ void mlx4_en_stop_port(struct net_device *dev)
struct mlx4_en_priv *priv = netdev_priv(dev);
struct mlx4_en_dev *mdev = priv->mdev;
struct mlx4_en_mc_list *mclist, *tmp;
struct ethtool_flow_id *flow, *tmp_flow;
int i;
u8 mc_list[16] = {0};
......@@ -1283,6 +1287,17 @@ void mlx4_en_stop_port(struct net_device *dev)
mlx4_put_eth_qp(mdev->dev, priv->port, priv->mac, priv->base_qpn);
mdev->mac_removed[priv->port] = 1;
/* Remove flow steering rules for the port*/
if (mdev->dev->caps.steering_mode ==
MLX4_STEERING_MODE_DEVICE_MANAGED) {
ASSERT_RTNL();
list_for_each_entry_safe(flow, tmp_flow,
&priv->ethtool_list, list) {
mlx4_flow_detach(mdev->dev, flow->id);
list_del(&flow->list);
}
}
/* Free RX Rings */
for (i = 0; i < priv->rx_ring_num; i++) {
mlx4_en_deactivate_rx_ring(priv, &priv->rx_ring[i]);
......
......@@ -427,6 +427,7 @@ struct mlx4_en_frag_info {
#endif
struct ethtool_flow_id {
struct list_head list;
struct ethtool_rx_flow_spec flow_spec;
u64 id;
};
......@@ -441,6 +442,8 @@ struct mlx4_en_priv {
struct mlx4_en_port_state port_state;
spinlock_t stats_lock;
struct ethtool_flow_id ethtool_rules[MAX_NUM_OF_FS_RULES];
/* To allow rules removal while port is going down */
struct list_head ethtool_list;
unsigned long last_moder_packets[MAX_RX_RINGS];
unsigned long last_moder_tx_packets;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册