Merge branch 'cris' of git://www.jni.nu/cris

* 'cris' of git://www.jni.nu/cris: (158 commits)
  CRIS v32: Remove hwregs/timer_defs.h, it is now architecture specific.
  CRIS v32: Change drivers/i2c.c locking.
  CRIS v32: Rewrite ARTPEC-3 gpio driver to avoid volatiles and general cleanup.
  CRIS: Add new timerfd syscall entries.
  MAINTAINERS: Add my information for the CRIS port.
  CRIS v32: Correct spelling of bandwidth in function name.
  CRIS v32: Clean up nandflash.c for ARTPEC-3 and ETRAX FS.
  CRIS v10: Cleanup of drivers/gpio.c
  CRIS v10: drivers/net/cris/eth_v10.c rename LED defines to CRIS_LED to avoid name clash.
  CRIS: Make io_pwm_set_period members unsigned in etraxgpio.h
  CRIS: Move ETRAX_AXISFLASHMAP to common Kconfig file.
  CRIS: Drop regs parameter from call to profile_tick in kernel/time.c
  CRIS v32: Fix minor formatting issue in mach-a3/io.c
  CRIS v32: Initialize GIO even if we're rambooting in kernel/head.S
  CRIS v32: Remove kernel/arbiter.c, it now exists in machine dependent directory.
  CRIS v32: Minor changes to avoid errors in asm-cris/arch-v32/hwregs/reg_rdwr.h
  CRIS v32: arch-v32/hwregs/intr_vect_defs.h moved to machine dependent directory.
  CRIS v32: Correct offset for TASK_pid in asm-cris/arch-v32/offset.h
  CRIS v32: Move register map header to machine dependent directory.
  CRIS v32: Let compiler know that memory is clobbered after a break op.
  ...

MAINTAINERS

@@ -1173,6 +1173,8 @@ S:	Orphan
 CRIS PORT
 P:	Mikael Starvik
 M:	starvik@axis.com
+P:	Jesper Nilsson
+M:	jesper.nilsson@axis.com
 L:	dev-etrax@axis.com
 W:	http://developer.axis.com
 S:	Maintained

arch/cris/Kconfig

@@ -13,10 +13,6 @@ config ZONE_DMA
 	bool
 	default y
 
-config NO_DMA
-	bool
-	default y
-
 config RWSEM_GENERIC_SPINLOCK
 	bool
 	default y
@@ -24,6 +20,10 @@ config RWSEM_GENERIC_SPINLOCK
 config RWSEM_XCHGADD_ALGORITHM
 	bool
 
+config GENERIC_IOMAP
+       bool
+       default y
+
 config ARCH_HAS_ILOG2_U32
 	bool
 	default n
@@ -44,13 +44,13 @@ config GENERIC_CALIBRATE_DELAY
 	bool
 	default y
 
-config IRQ_PER_CPU
-	bool
-	default y
-
 config NO_IOPORT
 	def_bool y
 
+config FORCE_MAX_ZONEORDER
+	int
+	default 6
+
 config CRIS
 	bool
 	default y
@@ -97,17 +97,15 @@ config ETRAX_FAST_TIMER
 	 timers).
 	 This is needed if CONFIG_ETRAX_SERIAL_FAST_TIMER is enabled.
 
-config PREEMPT
-	bool "Preemptible Kernel"
+config ETRAX_KMALLOCED_MODULES
+	bool "Enable module allocation with kmalloc"
 	help
-	  This option reduces the latency of the kernel when reacting to
-	  real-time or interactive events by allowing a low priority process to
-	  be preempted even if it is in kernel mode executing a system call.
-	  This allows applications to run more reliably even when the system is
-	  under load.
+	  Enable module allocation with kmalloc instead of vmalloc.
+
+config OOM_REBOOT
+       bool "Enable reboot at out of memory"
 
-	  Say Y here if you are building a kernel for a desktop, embedded
-	  or real-time system.  Say N if you are unsure.
+source "kernel/Kconfig.preempt"
 
 source mm/Kconfig
 
@@ -134,24 +132,124 @@ config SVINTO_SIM
 	help
 	  Support the xsim ETRAX Simulator.
 
+config ETRAXFS
+	bool "ETRAX-FS-V32"
+	help
+	  Support CRIS V32.
+
+config CRIS_MACH_ARTPEC3
+        bool "ARTPEC-3"
+        help
+          Support Axis ARTPEC-3.
+
 endchoice
 
+config ETRAX_VCS_SIM
+	bool "VCS Simulator"
+	help
+	  Setup hardware to be run in the VCS simulator.
+
 config ETRAX_ARCH_V10
        bool
        default y if ETRAX100LX || ETRAX100LX_V2
        default n if !(ETRAX100LX || ETRAX100LX_V2)
 
+config ETRAX_ARCH_V32
+       bool
+       default y if (ETRAXFS || CRIS_MACH_ARTPEC3)
+       default n if !(ETRAXFS || CRIS_MACH_ARTPEC3)
+
 config ETRAX_DRAM_SIZE
 	int "DRAM size (dec, in MB)"
 	default "8"
 	help
 	  Size of DRAM (decimal in MB) typically 2, 8 or 16.
 
+config ETRAX_VMEM_SIZE
+       int "Video memory size (dec, in MB)"
+       depends on ETRAX_ARCH_V32 && !ETRAXFS
+       default 8 if !ETRAXFS
+       help
+	Size of Video accessible memory (decimal, in MB).
+
 config ETRAX_FLASH_BUSWIDTH
-	int "Buswidth of flash in bytes"
+	int "Buswidth of NOR flash in bytes"
 	default "2"
 	help
-	  Width in bytes of the Flash bus (1, 2 or 4). Is usually 2.
+	  Width in bytes of the NOR Flash bus (1, 2 or 4). Is usually 2.
+
+config ETRAX_NANDFLASH_BUSWIDTH
+	int "Buswidth of NAND flash in bytes"
+	default "1"
+	help
+	  Width in bytes of the NAND flash (1 or 2).
+
+config ETRAX_FLASH1_SIZE
+       int "FLASH1 size (dec, in MB. 0 = Unknown)"
+       default "0"
+
+choice
+	prompt "Product debug-port"
+	default ETRAX_DEBUG_PORT0
+
+config ETRAX_DEBUG_PORT0
+	bool "Serial-0"
+	help
+	  Choose a serial port for the ETRAX debug console.  Default to
+	  port 0.
+
+config ETRAX_DEBUG_PORT1
+	bool "Serial-1"
+	help
+	  Use serial port 1 for the console.
+
+config ETRAX_DEBUG_PORT2
+	bool "Serial-2"
+	help
+	  Use serial port 2 for the console.
+
+config ETRAX_DEBUG_PORT3
+	bool "Serial-3"
+	help
+	  Use serial port 3 for the console.
+
+config ETRAX_DEBUG_PORT_NULL
+	bool "disabled"
+	help
+	  Disable serial-port debugging.
+
+endchoice
+
+choice
+	prompt "Kernel GDB port"
+	depends on ETRAX_KGDB
+	default ETRAX_KGDB_PORT0
+	help
+	  Choose a serial port for kernel debugging.  NOTE: This port should
+	  not be enabled under Drivers for built-in interfaces (as it has its
+	  own initialization code) and should not be the same as the debug port.
+
+config ETRAX_KGDB_PORT0
+	bool "Serial-0"
+	help
+	  Use serial port 0 for kernel debugging.
+
+config ETRAX_KGDB_PORT1
+	bool "Serial-1"
+	help
+	  Use serial port 1 for kernel debugging.
+
+config ETRAX_KGDB_PORT2
+	bool "Serial-2"
+	help
+	  Use serial port 2 for kernel debugging.
+
+config ETRAX_KGDB_PORT3
+	bool "Serial-3"
+	help
+	  Use serial port 3 for kernel debugging.
+
+endchoice
 
 source arch/cris/arch-v10/Kconfig
 source arch/cris/arch-v32/Kconfig
@@ -165,6 +263,387 @@ menu "Drivers for built-in interfaces"
 source arch/cris/arch-v10/drivers/Kconfig
 source arch/cris/arch-v32/drivers/Kconfig
 
+config ETRAX_AXISFLASHMAP
+	bool "Axis flash-map support"
+	select MTD
+	select MTD_CFI
+	select MTD_CFI_AMDSTD
+	select MTD_JEDECPROBE if ETRAX_ARCH_V32
+	select MTD_CHAR
+	select MTD_BLOCK
+	select MTD_PARTITIONS
+	select MTD_CONCAT
+	select MTD_COMPLEX_MAPPINGS
+	help
+	  This option enables MTD mapping of flash devices.  Needed to use
+	  flash memories.  If unsure, say Y.
+
+config ETRAX_RTC
+	bool "Real Time Clock support"
+	depends on ETRAX_I2C
+	help
+	  Enables drivers for the Real-Time Clock battery-backed chips on
+	  some products. The kernel reads the time when booting, and
+	  the date can be set using ioctl(fd, RTC_SET_TIME, &rt) with rt a
+	  rtc_time struct (see <file:include/asm-cris/rtc.h>) on the /dev/rtc
+	  device.  You can check the time with cat /proc/rtc, but
+	  normal time reading should be done using libc function time and
+	  friends.
+
+choice
+	prompt "RTC chip"
+	depends on ETRAX_RTC
+	default ETRAX_PCF8563 if ETRAX_ARCH_V32
+	default ETRAX_DS1302 if ETRAX_ARCH_V10
+
+config ETRAX_DS1302
+	depends on ETRAX_ARCH_V10
+	bool "DS1302"
+	help
+	  Enables the driver for the DS1302 Real-Time Clock battery-backed
+	  chip on some products.
+
+config ETRAX_PCF8563
+	bool "PCF8563"
+	help
+	  Enables the driver for the PCF8563 Real-Time Clock battery-backed
+	  chip on some products.
+
+endchoice
+
+config ETRAX_SYNCHRONOUS_SERIAL
+	bool "Synchronous serial-port support"
+	help
+	  Select this to enable the synchronous serial port driver.
+
+config ETRAX_SYNCHRONOUS_SERIAL_PORT0
+	bool "Synchronous serial port 0 enabled"
+	depends on ETRAX_SYNCHRONOUS_SERIAL
+	help
+	  Enabled synchronous serial port 0.
+
+config ETRAX_SYNCHRONOUS_SERIAL0_DMA
+	bool "Enable DMA on synchronous serial port 0."
+	depends on ETRAX_SYNCHRONOUS_SERIAL_PORT0
+	help
+	  A synchronous serial port can run in manual or DMA mode.
+	  Selecting this option will make it run in DMA mode.
+
+config ETRAX_SYNCHRONOUS_SERIAL_PORT1
+	bool "Synchronous serial port 1 enabled"
+	depends on ETRAX_SYNCHRONOUS_SERIAL && (ETRAXFS || ETRAX_ARCH_V10)
+	help
+	  Enabled synchronous serial port 1.
+
+config ETRAX_SYNCHRONOUS_SERIAL1_DMA
+	bool "Enable DMA on synchronous serial port 1."
+	depends on ETRAX_SYNCHRONOUS_SERIAL_PORT1
+	help
+	  A synchronous serial port can run in manual or DMA mode.
+	  Selecting this option will make it run in DMA mode.
+
+choice
+	prompt "Network LED behavior"
+	depends on ETRAX_ETHERNET
+	default ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY
+
+config ETRAX_NETWORK_LED_ON_WHEN_LINK
+	bool "LED_on_when_link"
+	help
+	  Selecting LED_on_when_link will light the LED when there is a
+	  connection and will flash off when there is activity.
+
+	  Selecting LED_on_when_activity will light the LED only when
+	  there is activity.
+
+	  This setting will also affect the behaviour of other activity LEDs
+	  e.g. Bluetooth.
+
+config ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY
+	bool "LED_on_when_activity"
+	help
+	  Selecting LED_on_when_link will light the LED when there is a
+	  connection and will flash off when there is activity.
+
+	  Selecting LED_on_when_activity will light the LED only when
+	  there is activity.
+
+	  This setting will also affect the behaviour of other activity LEDs
+	  e.g. Bluetooth.
+
+endchoice
+
+choice
+	prompt "Ser0 DMA out channel"
+	depends on ETRAX_SERIAL_PORT0
+	default ETRAX_SERIAL_PORT0_DMA6_OUT if ETRAX_ARCH_V32
+	default ETRAX_SERIAL_PORT0_NO_DMA_OUT if ETRAX_ARCH_V10
+
+config ETRAX_SERIAL_PORT0_NO_DMA_OUT
+	bool "Ser0 uses no DMA for output"
+	help
+	  Do not use DMA for ser0 output.
+
+config ETRAX_SERIAL_PORT0_DMA6_OUT
+	bool "Ser0 uses DMA6 for output"
+	depends on ETRAXFS
+	help
+	  Enables the DMA6 output channel for ser0 (ttyS0).
+	  If you do not enable DMA, an interrupt for each character will be
+	  used when transmitting data.
+	  Normally you want to use DMA, unless you use the DMA channel for
+	  something else.
+
+config ETRAX_SERIAL_PORT0_DMA0_OUT
+	bool "Ser0 uses DMA0 for output"
+	depends on CRIS_MACH_ARTPEC3
+	help
+	  Enables the DMA0 output channel for ser0 (ttyS0).
+	  If you do not enable DMA, an interrupt for each character will be
+	  used when transmitting data.
+	  Normally you want to use DMA, unless you use the DMA channel for
+	  something else.
+
+endchoice
+
+choice
+	prompt "Ser0 DMA in channel "
+	depends on ETRAX_SERIAL_PORT0
+	default ETRAX_SERIAL_PORT0_NO_DMA_IN if ETRAX_ARCH_V32
+	default ETRAX_SERIAL_PORT0_DMA7_IN if ETRAX_ARCH_V10
+	help
+	  What DMA channel to use for ser0.
+
+config ETRAX_SERIAL_PORT0_NO_DMA_IN
+	bool "Ser0 uses no DMA for input"
+	help
+	  Do not use DMA for ser0 input.
+
+config ETRAX_SERIAL_PORT0_DMA7_IN
+	bool "Ser0 uses DMA7 for input"
+	depends on ETRAXFS
+	help
+	  Enables the DMA7 input channel for ser0 (ttyS0).
+	  If you do not enable DMA, an interrupt for each character will be
+	  used when receiving data.
+	  Normally you want to use DMA, unless you use the DMA channel for
+	  something else.
+
+config ETRAX_SERIAL_PORT0_DMA1_IN
+	bool "Ser0 uses DMA1 for input"
+	depends on CRIS_MACH_ARTPEC3
+	help
+	  Enables the DMA1 input channel for ser0 (ttyS0).
+	  If you do not enable DMA, an interrupt for each character will be
+	  used when receiveing data.
+	  Normally you want to use DMA, unless you use the DMA channel for
+	  something else.
+
+endchoice
+
+choice
+	prompt "Ser1 DMA in channel "
+	depends on ETRAX_SERIAL_PORT1
+	default ETRAX_SERIAL_PORT1_NO_DMA_IN if ETRAX_ARCH_V32
+	default ETRAX_SERIAL_PORT1_DMA9_IN if ETRAX_ARCH_V10
+	help
+	  What DMA channel to use for ser1.
+
+config ETRAX_SERIAL_PORT1_NO_DMA_IN
+	bool "Ser1 uses no DMA for input"
+	help
+	  Do not use DMA for ser1 input.
+
+config ETRAX_SERIAL_PORT1_DMA5_IN
+	bool "Ser1 uses DMA5 for input"
+	depends on ETRAX_ARCH_V32
+	help
+	  Enables the DMA5 input channel for ser1 (ttyS1).
+	  If you do not enable DMA, an interrupt for each character will be
+	  used when receiving data.
+	  Normally you want this on, unless you use the DMA channel for
+	  something else.
+
+config ETRAX_SERIAL_PORT1_DMA9_IN
+	depends on ETRAX_ARCH_V10
+	bool "Ser1 uses DMA9 for input"
+
+endchoice
+
+
+choice
+	prompt "Ser1 DMA out channel"
+	depends on ETRAX_SERIAL_PORT1
+	default ETRAX_SERIAL_PORT1_NO_DMA_OUT if ETRAX_ARCH_V32
+	default ETRAX_SERIAL_PORT1_DMA8_OUT if ETRAX_ARCH_V10
+	help
+	  What DMA channel to use for ser1.
+
+config ETRAX_SERIAL_PORT1_NO_DMA_OUT
+	bool "Ser1 uses no DMA for output"
+	help
+	  Do not use DMA for ser1 output.
+
+config ETRAX_SERIAL_PORT1_DMA8_OUT
+	depends on ETRAX_ARCH_V10
+	bool "Ser1 uses DMA8 for output"
+
+config ETRAX_SERIAL_PORT1_DMA4_OUT
+	depends on ETRAX_ARCH_V32
+	bool "Ser1 uses DMA4 for output"
+	help
+	  Enables the DMA4 output channel for ser1 (ttyS1).
+	  If you do not enable DMA, an interrupt for each character will be
+	  used when transmitting data.
+	  Normally you want this on, unless you use the DMA channel for
+	  something else.
+
+endchoice
+
+choice
+	prompt "Ser2 DMA out channel"
+	depends on ETRAX_SERIAL_PORT2
+	default ETRAX_SERIAL_PORT2_NO_DMA_OUT if ETRAX_ARCH_V32
+	default ETRAX_SERIAL_PORT2_DMA2_OUT if ETRAX_ARCH_V10
+
+config ETRAX_SERIAL_PORT2_NO_DMA_OUT
+	bool "Ser2 uses no DMA for output"
+	help
+	  Do not use DMA for ser2 output.
+
+config ETRAX_SERIAL_PORT2_DMA2_OUT
+	bool "Ser2 uses DMA2 for output"
+	depends on ETRAXFS || ETRAX_ARCH_V10
+	help
+	  Enables the DMA2 output channel for ser2 (ttyS2).
+	  If you do not enable DMA, an interrupt for each character will be
+	  used when transmitting data.
+	  Normally you want to use DMA, unless you use the DMA channel for
+	  something else.
+
+config ETRAX_SERIAL_PORT2_DMA6_OUT
+	bool "Ser2 uses DMA6 for output"
+	depends on CRIS_MACH_ARTPEC3
+	help
+	  Enables the DMA6 output channel for ser2 (ttyS2).
+	  If you do not enable DMA, an interrupt for each character will be
+	  used when transmitting data.
+	  Normally you want to use DMA, unless you use the DMA channel for
+	  something else.
+
+endchoice
+
+choice
+	prompt "Ser2 DMA in channel"
+	depends on ETRAX_SERIAL_PORT2
+	default ETRAX_SERIAL_PORT2_NO_DMA_IN if ETRAX_ARCH_V32
+	default ETRAX_SERIAL_PORT2_DMA3_IN if ETRAX_ARCH_V10
+	help
+	  What DMA channel to use for ser2.
+
+config ETRAX_SERIAL_PORT2_NO_DMA_IN
+	bool "Ser2 uses no DMA for input"
+	help
+	  Do not use DMA for ser2 input.
+
+config ETRAX_SERIAL_PORT2_DMA3_IN
+	bool "Ser2 uses DMA3 for input"
+	depends on ETRAXFS || ETRAX_ARCH_V10
+	help
+	  Enables the DMA3 input channel for ser2 (ttyS2).
+	  If you do not enable DMA, an interrupt for each character will be
+	  used when receiving data.
+	  Normally you want to use DMA, unless you use the DMA channel for
+	  something else.
+
+config ETRAX_SERIAL_PORT2_DMA7_IN
+	bool "Ser2 uses DMA7 for input"
+	depends on CRIS_MACH_ARTPEC3
+	help
+	  Enables the DMA7 input channel for ser2 (ttyS2).
+	  If you do not enable DMA, an interrupt for each character will be
+	  used when receiveing data.
+	  Normally you want to use DMA, unless you use the DMA channel for
+	  something else.
+
+endchoice
+
+choice
+	prompt "Ser3 DMA in channel"
+	depends on ETRAX_SERIAL_PORT3
+	default ETRAX_SERIAL_PORT3_NO_DMA_IN if ETRAX_ARCH_V32
+	default ETRAX_SERIAL_PORT3_DMA5_IN if ETRAX_ARCH_V10
+	help
+	  What DMA channel to use for ser3.
+
+config ETRAX_SERIAL_PORT3_NO_DMA_IN
+	bool "Ser3 uses no DMA for input"
+	help
+	  Do not use DMA for ser3 input.
+
+config ETRAX_SERIAL_PORT3_DMA5_IN
+	depends on ETRAX_ARCH_V10
+	bool "DMA 5"
+
+config ETRAX_SERIAL_PORT3_DMA9_IN
+	bool "Ser3 uses DMA9 for input"
+	depends on ETRAXFS
+	help
+	  Enables the DMA9 input channel for ser3 (ttyS3).
+	  If you do not enable DMA, an interrupt for each character will be
+	  used when receiving data.
+	  Normally you want to use DMA, unless you use the DMA channel for
+	  something else.
+
+config ETRAX_SERIAL_PORT3_DMA3_IN
+	bool "Ser3 uses DMA3 for input"
+	depends on CRIS_MACH_ARTPEC3
+	help
+	  Enables the DMA3 input channel for ser3 (ttyS3).
+	  If you do not enable DMA, an interrupt for each character will be
+	  used when receiveing data.
+	  Normally you want to use DMA, unless you use the DMA channel for
+	  something else.
+
+endchoice
+
+choice
+	prompt "Ser3 DMA out channel"
+	depends on ETRAX_SERIAL_PORT3
+	default ETRAX_SERIAL_PORT3_NO_DMA_OUT if ETRAX_ARCH_V32
+	default ETRAX_SERIAL_PORT3_DMA4_OUT if ETRAX_ARCH_V10
+
+config ETRAX_SERIAL_PORT3_NO_DMA_OUT
+	bool "Ser3 uses no DMA for output"
+	help
+	  Do not use DMA for ser3 output.
+
+config ETRAX_SERIAL_PORT3_DMA4_OUT
+	depends on ETRAX_ARCH_V10
+	bool "DMA 4"
+
+config ETRAX_SERIAL_PORT3_DMA8_OUT
+	bool "Ser3 uses DMA8 for output"
+	depends on ETRAXFS
+	help
+	  Enables the DMA8 output channel for ser3 (ttyS3).
+	  If you do not enable DMA, an interrupt for each character will be
+	  used when transmitting data.
+	  Normally you want to use DMA, unless you use the DMA channel for
+	  something else.
+
+config ETRAX_SERIAL_PORT3_DMA2_OUT
+	bool "Ser3 uses DMA2 for output"
+	depends on CRIS_MACH_ARTPEC3
+	help
+	  Enables the DMA2 output channel for ser3 (ttyS3).
+	  If you do not enable DMA, an interrupt for each character will be
+	  used when transmitting data.
+	  Normally you want to use DMA, unless you use the DMA channel for
+	  something else.
+
+endchoice
+
 endmenu
 
 source "drivers/base/Kconfig"
@@ -178,22 +657,10 @@ source "drivers/pnp/Kconfig"
 
 source "drivers/block/Kconfig"
 
-source "drivers/md/Kconfig"
-
 source "drivers/ide/Kconfig"
 
-source "drivers/scsi/Kconfig"
-
-source "drivers/ieee1394/Kconfig"
-
-source "drivers/message/i2o/Kconfig"
-
 source "drivers/net/Kconfig"
 
-source "drivers/isdn/Kconfig"
-
-source "drivers/telephony/Kconfig"
-
 source "drivers/i2c/Kconfig"
 
 source "drivers/rtc/Kconfig"
@@ -205,17 +672,8 @@ source "drivers/input/Kconfig"
 
 source "drivers/char/Kconfig"
 
-#source drivers/misc/Config.in
-source "drivers/media/Kconfig"
-
 source "fs/Kconfig"
 
-source "sound/Kconfig"
-
-source "drivers/pcmcia/Kconfig"
-
-source "drivers/pci/Kconfig"
-
 source "drivers/usb/Kconfig"
 
 source "arch/cris/Kconfig.debug"

arch/cris/Makefile

-# $Id: Makefile,v 1.28 2005/03/17 10:44:37 larsv Exp $
+#
 # cris/Makefile
 #
 # This file is included by the global makefile so that you can add your own
@@ -10,28 +10,36 @@
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
 
-# A bug in ld prevents us from having a (constant-value) symbol in a
-# "ORIGIN =" or "LENGTH =" expression.
-
 arch-y := v10
 arch-$(CONFIG_ETRAX_ARCH_V10) := v10
 arch-$(CONFIG_ETRAX_ARCH_V32) := v32
 
-# No config avaiable for make clean etc
+# No config available for make clean etc
+mach-y := fs
+mach-$(CONFIG_CRIS_MACH_ARTPEC3) := a3
+mach-$(CONFIG_ETRAXFS) := fs
+
 ifneq ($(arch-y),)
 SARCH := arch-$(arch-y)
 else
 SARCH :=
 endif
 
+ifneq ($(mach-y),)
+MACH := mach-$(mach-y)
+else
+MACH :=
+endif
+
 LD = $(CROSS_COMPILE)ld -mcrislinux
 
 OBJCOPYFLAGS := -O binary -R .note -R .comment -S
 
 CPPFLAGS_vmlinux.lds = -DDRAM_VIRTUAL_BASE=0x$(CONFIG_ETRAX_DRAM_VIRTUAL_BASE)
-KBUILD_AFLAGS += -mlinux
 
-KBUILD_CFLAGS += -mlinux -march=$(arch-y) -pipe
+KBUILD_AFLAGS += -mlinux -march=$(arch-y) -Iinclude/asm/arch/mach -Iinclude/asm/arch
+
+KBUILD_CFLAGS += -mlinux -march=$(arch-y) -pipe -Iinclude/asm/arch/mach -Iinclude/asm/arch
 
 ifdef CONFIG_FRAME_POINTER
 KBUILD_CFLAGS := $(subst -fomit-frame-pointer,,$(KBUILD_CFLAGS)) -g
@@ -44,6 +52,9 @@ LIBGCC = $(shell $(CC) $(KBUILD_CFLAGS) -print-file-name=libgcc.a)
 
 core-y		+= arch/$(ARCH)/kernel/ arch/$(ARCH)/mm/
 core-y		+= arch/$(ARCH)/$(SARCH)/kernel/ arch/$(ARCH)/$(SARCH)/mm/
+ifdef CONFIG_ETRAX_ARCH_V32
+core-y		+= arch/$(ARCH)/$(SARCH)/$(MACH)/
+endif
 drivers-y	+= arch/$(ARCH)/$(SARCH)/drivers/
 libs-y		+= arch/$(ARCH)/$(SARCH)/lib/ $(LIBGCC)
 
@@ -52,79 +63,69 @@ SRC_ARCH              = $(srctree)/arch/$(ARCH)
 # cris object files path
 OBJ_ARCH              = $(objtree)/arch/$(ARCH)
 
-target_boot_arch_dir  = $(OBJ_ARCH)/$(SARCH)/boot
-target_boot_dir       = $(OBJ_ARCH)/boot
-src_boot_dir          = $(SRC_ARCH)/boot
-target_compressed_dir = $(OBJ_ARCH)/boot/compressed
-src_compressed_dir    = $(SRC_ARCH)/boot/compressed
-target_rescue_dir     = $(OBJ_ARCH)/boot/rescue
-src_rescue_dir        = $(SRC_ARCH)/boot/rescue
-
-export target_boot_arch_dir target_boot_dir src_boot_dir target_compressed_dir src_compressed_dir target_rescue_dir src_rescue_dir
-
-vmlinux.bin: vmlinux
-	$(OBJCOPY) $(OBJCOPYFLAGS) vmlinux vmlinux.bin
-
-timage: vmlinux.bin
-	cat vmlinux.bin cramfs.img >timage
-
-simimage: timage
-	cp vmlinux.bin simvmlinux.bin
-
-# the following will remake timage without compiling the kernel
-# it does of course require that all object files exist...
-
-cramfs:
-## cramfs      - Creates a cramfs image
-	mkcramfs -b 8192 -m romfs_meta.txt root cramfs.img
-	cat vmlinux.bin cramfs.img >timage
+boot := arch/$(ARCH)/boot
+MACHINE := arch/$(ARCH)/$(SARCH)
 
-clinux: vmlinux.bin decompress.bin rescue.bin
+all: zImage
 
-decompress.bin: $(target_boot_dir)
-	@$(MAKE) -f $(src_compressed_dir)/Makefile $(target_compressed_dir)/decompress.bin
+zImage Image: vmlinux
+	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
 
-$(target_rescue_dir)/rescue.bin: $(target_boot_dir)
-	@$(MAKE) -f $(src_rescue_dir)/Makefile $(target_rescue_dir)/rescue.bin
-
-zImage: $(target_boot_dir) vmlinux.bin $(target_rescue_dir)/rescue.bin
-## zImage     - Compressed kernel (gzip)
-	@$(MAKE) -f $(src_boot_dir)/Makefile zImage
-
-$(target_boot_dir): $(target_boot_arch_dir)
-	ln -sfn $< $@
-
-$(target_boot_arch_dir):
-	mkdir -p $@
-
-compressed: zImage
-
-archmrproper:
-archclean:
-	@if [ -d arch/$(ARCH)/boot ]; then \
-		$(MAKE) $(clean)=arch/$(ARCH)/boot ; \
-	fi
-	rm -f timage vmlinux.bin decompress.bin rescue.bin cramfs.img
-	rm -rf $(LD_SCRIPT).tmp
-
-archprepare: $(SRC_ARCH)/.links $(srctree)/include/asm-$(ARCH)/.arch
+archprepare: $(SRC_ARCH)/.links $(srctree)/include/asm-$(ARCH)/.arch FORCE
 
 # Create some links to make all tools happy
 $(SRC_ARCH)/.links:
 	@rm -rf $(SRC_ARCH)/drivers
-	@ln -sfn $(SRC_ARCH)/$(SARCH)/drivers $(SRC_ARCH)/drivers
+	@ln -sfn $(SARCH)/drivers $(SRC_ARCH)/drivers
 	@rm -rf $(SRC_ARCH)/boot
-	@ln -sfn $(SRC_ARCH)/$(SARCH)/boot $(SRC_ARCH)/boot
+	@ln -sfn $(SARCH)/boot $(SRC_ARCH)/boot
 	@rm -rf $(SRC_ARCH)/lib
-	@ln -sfn $(SRC_ARCH)/$(SARCH)/lib $(SRC_ARCH)/lib
-	@ln -sfn $(SRC_ARCH)/$(SARCH) $(SRC_ARCH)/arch
-	@ln -sfn $(SRC_ARCH)/$(SARCH)/vmlinux.lds.S $(SRC_ARCH)/kernel/vmlinux.lds.S
-	@ln -sfn $(SRC_ARCH)/$(SARCH)/kernel/asm-offsets.c $(SRC_ARCH)/kernel/asm-offsets.c
+	@ln -sfn $(SARCH)/lib $(SRC_ARCH)/lib
+	@rm -f $(SRC_ARCH)/arch/mach
+	@rm -rf $(SRC_ARCH)/arch
+	@ln -sfn $(SARCH) $(SRC_ARCH)/arch
+ifdef CONFIG_ETRAX_ARCH_V32
+	@ln -sfn ../$(SARCH)/$(MACH) $(SRC_ARCH)/arch/mach
+endif
+	@rm -rf $(SRC_ARCH)/kernel/vmlinux.lds.S
+	@ln -sfn ../$(SARCH)/vmlinux.lds.S $(SRC_ARCH)/kernel/vmlinux.lds.S
+	@rm -rf $(SRC_ARCH)/kernel/asm-offsets.c
+	@ln -sfn ../$(SARCH)/kernel/asm-offsets.c $(SRC_ARCH)/kernel/asm-offsets.c
 	@touch $@
 
 # Create link to sub arch includes
 $(srctree)/include/asm-$(ARCH)/.arch: $(wildcard include/config/arch/*.h)
-	@echo '  Making $(srctree)/include/asm-$(ARCH)/arch -> $(srctree)/include/asm-$(ARCH)/$(SARCH) symlink'
-	@rm -f include/asm-$(ARCH)/arch
-	@ln -sf $(srctree)/include/asm-$(ARCH)/$(SARCH) $(srctree)/include/asm-$(ARCH)/arch
+	@echo '  SYMLINK include/asm-$(ARCH)/arch -> include/asm-$(ARCH)/$(SARCH)'
+	@rm -f $(srctree)/include/asm-$(ARCH)/arch/mach
+	@rm -f $(srctree)/include/asm-$(ARCH)/arch
+	@ln -sf $(SARCH) $(srctree)/include/asm-$(ARCH)/arch
+ifdef CONFIG_ETRAX_ARCH_V32
+	@ln -sf $(MACH) $(srctree)/include/asm-$(ARCH)/arch/mach
+endif
 	@touch $@
+
+archclean:
+	$(Q)if [ -e arch/$(ARCH)/boot ]; then \
+		$(MAKE) $(clean)=arch/$(ARCH)/boot; \
+	fi
+
+CLEAN_FILES += \
+	$(MACHINE)/boot/zImage \
+	$(MACHINE)/boot/compressed/decompress.bin \
+	$(MACHINE)/boot/compressed/piggy.gz \
+	$(MACHINE)/boot/rescue/rescue.bin \
+	$(SRC_ARCH)/.links \
+	$(srctree)/include/asm-$(ARCH)/.arch
+
+MRPROPER_FILES += \
+	$(SRC_ARCH)/drivers \
+	$(SRC_ARCH)/boot \
+	$(SRC_ARCH)/lib \
+	$(SRC_ARCH)/arch \
+	$(SRC_ARCH)/kernel/vmlinux.lds.S \
+	$(SRC_ARCH)/kernel/asm-offsets.c
+
+define archhelp
+  echo  '* zImage        - Compressed kernel image (arch/$(ARCH)/boot/zImage)'
+  echo  '* Image         - Uncompressed kernel image (arch/$(ARCH)/boot/Image)'
+endef

arch/cris/arch-v10/Kconfig

 if ETRAX_ARCH_V10
 
+menu "CRIS v10 options"
+
 # ETRAX 100LX v1 has a MMU "feature" requiring a low mapping
 config CRIS_LOW_MAP
 	bool
@@ -228,69 +230,6 @@ config ETRAX_LED12R
 	  For products with only one or two controllable LEDs,
 	  set this to same as CONFIG_ETRAX_LED1G (normally 2).
 
-choice
-	prompt "Product debug-port"
-	depends on ETRAX_ARCH_V10
-	default ETRAX_DEBUG_PORT0
-
-config ETRAX_DEBUG_PORT0
-	bool "Serial-0"
-	help
-	  Choose a serial port for the ETRAX debug console.  Default to
-	  port 0.
-
-config ETRAX_DEBUG_PORT1
-	bool "Serial-1"
-	help
-	  Use serial port 1 for the console.
-
-config ETRAX_DEBUG_PORT2
-	bool "Serial-2"
-	help
-	  Use serial port 2 for the console.
-
-config ETRAX_DEBUG_PORT3
-	bool "Serial-3"
-	help
-	  Use serial port 3 for the console.
-
-config ETRAX_DEBUG_PORT_NULL
-	bool "disabled"
-	help
-	  Disable serial-port debugging.
-
-endchoice
-
-choice
-	prompt "Kernel GDB port"
-	depends on ETRAX_KGDB
-	default ETRAX_KGDB_PORT0
-	help
-	  Choose a serial port for kernel debugging.  NOTE: This port should
-	  not be enabled under Drivers for built-in interfaces (as it has its
-	  own initialization code) and should not be the same as the debug port.
-
-config ETRAX_KGDB_PORT0
-	bool "Serial-0"
-	help
-	  Use serial port 0 for kernel debugging.
-
-config ETRAX_KGDB_PORT1
-	bool "Serial-1"
-	help
-	  Use serial port 1 for kernel debugging.
-
-config ETRAX_KGDB_PORT2
-	bool "Serial-2"
-	help
-	  Use serial port 2 for kernel debugging.
-
-config ETRAX_KGDB_PORT3
-	bool "Serial-3"
-	help
-	  Use serial port 3 for kernel debugging.
-
-endchoice
 
 choice
 	prompt "Product rescue-port"
@@ -454,4 +393,6 @@ config ETRAX_POWERBUTTON_BIT
 	help
 	  Configure where power button is connected.
 
+endmenu
+
 endif

arch/cris/arch-v10/boot/Makefile

 #
-# arch/cris/boot/Makefile
+# arch/cris/arch-v10/boot/Makefile
 #
-target = $(target_boot_dir)
-src    = $(src_boot_dir)
 
-zImage: compressed/vmlinuz
+OBJCOPY = objcopy-cris
+OBJCOPYFLAGS = -O binary --remove-section=.bss
 
-compressed/vmlinuz:
-	@$(MAKE) -f $(src)/compressed/Makefile $(target_compressed_dir)/vmlinuz
+subdir- := compressed rescue
+targets := Image
 
-clean:
-	@$(MAKE) -f $(src)/compressed/Makefile clean
+$(obj)/Image: vmlinux FORCE
+	$(call if_changed,objcopy)
+	@echo '  Kernel: $@ is ready'
+
+$(obj)/compressed/vmlinux: $(obj)/Image FORCE
+	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
+	$(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin
+
+$(obj)/zImage:  $(obj)/compressed/vmlinux
+	@cp $< $@
+	@echo '  Kernel: $@ is ready'

arch/cris/arch-v10/boot/compressed/Makefile

 #
-# create a compressed vmlinuz image from the binary vmlinux.bin file
+# arch/cris/arch-v10/boot/compressed/Makefile
 #
-target = $(target_compressed_dir)
-src    = $(src_compressed_dir)
 
 CC = gcc-cris -melf $(LINUXINCLUDE)
-CFLAGS = -O2
+ccflags-y += -O2
 LD = ld-cris
+ldflags-y += -T $(obj)/decompress.ld
+OBJECTS = $(obj)/head.o $(obj)/misc.o
 OBJCOPY = objcopy-cris
 OBJCOPYFLAGS = -O binary --remove-section=.bss
-OBJECTS = $(target)/head.o $(target)/misc.o
 
-# files to compress
-SYSTEM = $(objtree)/vmlinux.bin
+quiet_cmd_image = BUILD   $@
+cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@
 
-all: $(target_compressed_dir)/vmlinuz
+targets := vmlinux piggy.gz decompress.o decompress.bin
 
-$(target)/decompress.bin: $(OBJECTS)
-	$(LD) -T $(src)/decompress.ld -o $(target)/decompress.o $(OBJECTS)
-	$(OBJCOPY) $(OBJCOPYFLAGS) $(target)/decompress.o $(target)/decompress.bin
+$(obj)/decompress.o: $(OBJECTS) FORCE
+	$(call if_changed,ld)
 
-# Create vmlinuz image in top-level build directory
-$(target_compressed_dir)/vmlinuz: $(target) piggy.img $(target)/decompress.bin
-	@echo "  COMPR   vmlinux.bin --> vmlinuz"
-	@cat $(target)/decompress.bin piggy.img > $(target_compressed_dir)/vmlinuz
-	@rm -f piggy.img
+$(obj)/decompress.bin: $(obj)/decompress.o FORCE
+	$(call if_changed,objcopy)
 
-$(target)/head.o: $(src)/head.S
-	$(CC) -D__ASSEMBLY__ -traditional -c $< -o $@
+$(obj)/head.o: $(obj)/head.S .config
+	@$(CC) -D__ASSEMBLY__ -traditional -c $< -o $@
 
-$(target)/misc.o: $(src)/misc.c
-	$(CC) -D__KERNEL__ -c $< -o $@
+$(obj)/misc.o: $(obj)/misc.c .config
+	@$(CC) -D__KERNEL__ -c $< -o $@
 
-# gzip the kernel image
+$(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE
+	$(call if_changed,image)
 
-piggy.img: $(SYSTEM)
-	@cat $(SYSTEM) | gzip -f -9 > piggy.img
-
-$(target):
-	mkdir -p $(target)
-
-clean:
-	rm -f piggy.img $(objtree)/vmlinuz
+$(obj)/piggy.gz: $(obj)/../Image FORCE
+	$(call if_changed,gzip)
 

arch/cris/arch-v10/boot/compressed/misc.c

 /*
  * misc.c
  *
- * $Id: misc.c,v 1.6 2003/10/27 08:04:31 starvik Exp $
- * 
- * This is a collection of several routines from gzip-1.0.3 
+ * This is a collection of several routines from gzip-1.0.3
  * adapted for Linux.
  *
  * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
  * puts by Nick Holloway 1993, better puts by Martin Mares 1995
  * adaptation for Linux/CRIS Axis Communications AB, 1999
- * 
+ *
  */
 
 /* where the piggybacked kernel image expects itself to live.

arch/cris/arch-v10/boot/rescue/Makefile

 #
-# Makefile for rescue code
+# Makefile for rescue (bootstrap) code
 #
-target = $(target_rescue_dir)
-src    = $(src_rescue_dir)
 
 CC = gcc-cris -mlinux $(LINUXINCLUDE)
-CFLAGS = -O2
+ccflags-y += -O2
+asflags-y += -traditional
 LD = gcc-cris -mlinux -nostdlib
+ldflags-y += -T $(obj)/rescue.ld
 OBJCOPY = objcopy-cris
 OBJCOPYFLAGS = -O binary --remove-section=.bss
+obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o
+OBJECT := $(obj)/head.o
 
-all: $(target)/rescue.bin $(target)/testrescue.bin $(target)/kimagerescue.bin
+targets := rescue.o rescue.bin
 
-$(target)/rescue.bin: $(target) $(target)/head.o
-	$(LD) -T $(src)/rescue.ld -o $(target)/rescue.o $(target)/head.o
-	$(OBJCOPY) $(OBJCOPYFLAGS) $(target)/rescue.o $(target)/rescue.bin
-# Place a copy in top-level build directory
-	cp -p $(target)/rescue.bin $(objtree)
+$(obj)/rescue.o: $(OBJECT) FORCE
+	$(call if_changed,ld)
 
-$(target)/testrescue.bin: $(target) $(target)/testrescue.o
-	$(OBJCOPY) $(OBJCOPYFLAGS) $(target)/testrescue.o tr.bin
+$(obj)/rescue.bin: $(obj)/rescue.o FORCE
+	$(call if_changed,objcopy)
+	cp -p $(obj)/rescue.bin $(objtree)
+
+$(obj)/testrescue.bin: $(obj)/testrescue.o
+	$(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/testrescue.o tr.bin
 # Pad it to 784 bytes
 	dd if=/dev/zero of=tmp2423 bs=1 count=784
 	cat tr.bin tmp2423 >testrescue_tmp.bin
-	dd if=testrescue_tmp.bin of=$(target)/testrescue.bin bs=1 count=784
+	dd if=testrescue_tmp.bin of=$(obj)/testrescue.bin bs=1 count=784
 	rm tr.bin tmp2423 testrescue_tmp.bin
 
-$(target)/kimagerescue.bin: $(target) $(target)/kimagerescue.o
-	$(OBJCOPY) $(OBJCOPYFLAGS) $(target)/kimagerescue.o ktr.bin
+$(obj)/kimagerescue.bin: $(obj)/kimagerescue.o
+	$(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/kimagerescue.o ktr.bin
 # Pad it to 784 bytes, that's what the rescue loader expects
 	dd if=/dev/zero of=tmp2423 bs=1 count=784
 	cat ktr.bin tmp2423 >kimagerescue_tmp.bin
-	dd if=kimagerescue_tmp.bin of=$(target)/kimagerescue.bin bs=1 count=784
+	dd if=kimagerescue_tmp.bin of=$(obj)/kimagerescue.bin bs=1 count=784
 	rm ktr.bin tmp2423 kimagerescue_tmp.bin
-
-$(target):
-	mkdir -p $(target)
-
-$(target)/head.o: $(src)/head.S
-	$(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o
-
-$(target)/testrescue.o: $(src)/testrescue.S
-	$(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o
-
-$(target)/kimagerescue.o: $(src)/kimagerescue.S
-	$(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o
-
-clean:
-	rm -f $(target)/*.o $(target)/*.bin
-
-fastdep:
-
-modules:
-
-modules-install:

arch/cris/arch-v10/boot/rescue/head.S

-/* $Id: head.S,v 1.7 2005/03/07 12:11:06 starvik Exp $
- * 
+/*
  * Rescue code, made to reside at the beginning of the
  * flash-memory. when it starts, it checks a partition
  * table at the first sector after the rescue sector.
@@ -23,20 +22,20 @@
  * Partition table format:
  *
  *     Code transparency:
- * 
+ *
  *     2 bytes    [opcode 'nop']
  *     2 bytes    [opcode 'di']
  *     4 bytes    [opcode 'ba <offset>', 8-bit or 16-bit version]
  *     2 bytes    [opcode 'nop', delay slot]
  *
- *     Table validation (at +10):	
- * 
+ *     Table validation (at +10):
+ *
  *     2 bytes    [magic/version word for partitiontable - 0xef, 0xbe]
  *     2 bytes    [length of all entries plus the end marker]
  *     4 bytes    [checksum for the partitiontable itself]
  *
- *     Entries, each with the following format, last has offset -1:	
- *    
+ *     Entries, each with the following format, last has offset -1:
+ *
  *        4 bytes    [offset in bytes, from start of flash]
  *        4 bytes    [length in bytes of partition]
  *        4 bytes    [checksum, simple longword sum]
@@ -47,9 +46,9 @@
  *     End marker
  *
  *        4 bytes    [-1]
- * 
+ *
  *	 10 bytes    [0, padding]
- * 
+ *
  * Bit 0 in flags signifies RW or RO. The rescue code only bothers
  * to check the checksum for RO partitions, since the others will
  * change their data without updating the checksums. A 1 in bit 0
@@ -59,26 +58,29 @@
  *
  * During the wait for serial input, the status LED will flash so the
  * user knows something went wrong.
- * 
- * Copyright (C) 1999, 2000, 2001, 2002, 2003 Axis Communications AB
+ *
+ * Copyright (C) 1999-2007 Axis Communications AB
  */
 
+#ifdef CONFIG_ETRAX_AXISFLASHMAP
+
 #define ASSEMBLER_MACROS_ONLY
 #include <asm/arch/sv_addr_ag.h>
 
 	;; The partitiontable is looked for at the first sector after the boot
 	;; sector. Sector size is 65536 bytes in all flashes we use.
-		
+
 #define PTABLE_START CONFIG_ETRAX_PTABLE_SECTOR
 #define PTABLE_MAGIC 0xbeef
 
 	;; The normal Etrax100 on-chip boot ROM does serial boot at 0x380000f0.
-	;; That is not where we put our downloaded serial boot-code. The length is
-	;; enough for downloading code that loads the rest of itself (after
-	;; having setup the DRAM etc). It is the same length as the on-chip
-	;; ROM loads, so the same host loader can be used to load a rescued
-	;; product as well as one booted through the Etrax serial boot code.
-		
+	;; That is not where we put our downloaded serial boot-code.
+	;; The length is enough for downloading code that loads the rest
+	;; of itself (after having setup the DRAM etc).
+	;; It is the same length as the on-chip ROM loads, so the same
+	;; host loader can be used to load a rescued product as well as
+	;; one booted through the Etrax serial boot code.
+
 #define CODE_START 0x40000000
 #define CODE_LENGTH 784
 
@@ -102,7 +104,7 @@
 #define SERRECC R_SERIAL2_REC_CTRL
 #define SERRDAT R_SERIAL2_REC_DATA
 #define SERSTAT R_SERIAL2_STATUS
-#endif	
+#endif
 #ifdef CONFIG_ETRAX_RESCUE_SER3
 #define SERXOFF R_SERIAL3_XOFF
 #define SERBAUD R_SERIAL3_BAUD
@@ -115,60 +117,61 @@
 #define RAM_INIT_MAGIC 0x56902387
 
 	.text
-	
+
 	;; This is the entry point of the rescue code
 	;; 0x80000000 if loaded in flash (as it should be)
-	;; since etrax actually starts at address 2 when booting from flash, we
+	;; Since etrax actually starts at address 2 when booting from flash, we
 	;; put a nop (2 bytes) here first so we dont accidentally skip the di
 
-	nop	
+	nop
 	di
 
 	jump	in_cache	; enter cached area instead
 in_cache:
 
 
-	;; first put a jump test to give a possibility of upgrading the rescue code
-	;; without erasing/reflashing the sector. we put a longword of -1 here and if
-	;; it is not -1, we jump using the value as jump target. since we can always
-	;; change 1's to 0's without erasing the sector, it is possible to add new
+	;; First put a jump test to give a possibility of upgrading the
+	;; rescue code without erasing/reflashing the sector.
+	;; We put a longword of -1 here and if it is not -1, we jump using
+	;; the value as jump target. Since we can always change 1's to 0's
+	;; without erasing the sector, it is possible to add new
 	;; code after this and altering the jumptarget in an upgrade.
 
 jtcd:	move.d	[jumptarget], $r0
 	cmp.d	0xffffffff, $r0
 	beq	no_newjump
 	nop
-	
+
 	jump	[$r0]
 
-jumptarget:	
+jumptarget:
 	.dword	0xffffffff	; can be overwritten later to insert new code
-	
+
 no_newjump:
-#ifdef CONFIG_ETRAX_ETHERNET		
+#ifdef CONFIG_ETRAX_ETHERNET
 	;; Start MII clock to make sure it is running when tranceiver is reset
 	move.d 0x3, $r0    ; enable = on, phy = mii_clk
 	move.d $r0, [R_NETWORK_GEN_CONFIG]
 #endif
-	
+
 	;; We need to setup the bus registers before we start using the DRAM
 #include "../../lib/dram_init.S"
 
 	;; we now should go through the checksum-table and check the listed
 	;; partitions for errors.
-	
+
 	move.d	PTABLE_START, $r3
 	move.d	[$r3], $r0
 	cmp.d	NOP_DI, $r0	; make sure the nop/di is there...
 	bne	do_rescue
 	nop
-	
+
 	;; skip the code transparency block (10 bytes).
 
 	addq	10, $r3
-	
+
 	;; check for correct magic
-	
+
 	move.w	[$r3+], $r0
 	cmp.w	PTABLE_MAGIC, $r0
 	bne	do_rescue	; didn't recognize - trig rescue
@@ -186,11 +189,11 @@ no_newjump:
 	cmp.d	$r0, $r4
 	bne	do_rescue	; didn't match - trig rescue
 	nop
-	
+
 	;; ptable is ok. validate each entry.
 
 	moveq	-1, $r7
-	
+
 ploop:	move.d	[$r3+], $r1	; partition offset (from ptable start)
 	bne	notfirst	; check if it is the partition containing ptable
 	nop			; yes..
@@ -199,7 +202,7 @@ ploop:	move.d	[$r3+], $r1	; partition offset (from ptable start)
 	sub.d	$r8, $r2	; minus the ptable length
 	ba	bosse
 	nop
-notfirst:	
+notfirst:
 	cmp.d	-1, $r1		; the end of the ptable ?
 	beq	flash_ok	;   if so, the flash is validated
 	move.d	[$r3+], $r2	; partition length
@@ -213,47 +216,46 @@ bosse:	move.d	[$r3+], $r5	; checksum
 	bpl	1f
 	nop
 	move.d	$r1, $r7	; remember boot partition offset
-1:	
-
+1:
 	add.d	PTABLE_START, $r1
-	
+
 	jsr	checksum	; checksum the partition
-	
+
 	cmp.d	$r0, $r5
 	beq	ploop		; checksums matched, go to next entry
 	nop
 
 	;; otherwise fall through to the rescue code.
-	
+
 do_rescue:
 	;; setup port PA and PB default initial directions and data
 	;; (so we can flash LEDs, and so that DTR and others are set)
-	
+
 	move.b	CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0
 	move.b	$r0, [R_PORT_PA_DIR]
 	move.b	CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0
 	move.b	$r0, [R_PORT_PA_DATA]
-	
+
 	move.b	CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0
 	move.b	$r0, [R_PORT_PB_DIR]
 	move.b	CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0
 	move.b	$r0, [R_PORT_PB_DATA]
 
 	;; setup the serial port at 115200 baud
-	
+
 	moveq	0, $r0
-	move.d	$r0, [SERXOFF] 
+	move.d	$r0, [SERXOFF]
 
 	move.b	0x99, $r0
-	move.b	$r0, [SERBAUD]		; 115.2kbaud for both transmit and receive
+	move.b	$r0, [SERBAUD]	; 115.2kbaud for both transmit and receive
 
-	move.b	0x40, $r0		; rec enable
-	move.b	$r0, [SERRECC] 
+	move.b	0x40, $r0	; rec enable
+	move.b	$r0, [SERRECC]
 
 	moveq	0, $r1		; "timer" to clock out a LED red flash
 	move.d	CODE_START, $r3	; destination counter
 	movu.w	CODE_LENGTH, $r4; length
-	
+
 wait_ser:
 	addq	1, $r1
 #ifndef CONFIG_ETRAX_NO_LEDS
@@ -272,20 +274,20 @@ wait_ser:
 	nop
 1:	not	$r0		; clear bit
 	and.d	$r0, $r2
-2:	
+2:
 #ifdef CONFIG_ETRAX_PA_LEDS
-	move.b	$r2, [R_PORT_PA_DATA]	
-#endif	
+	move.b	$r2, [R_PORT_PA_DATA]
+#endif
 #ifdef CONFIG_ETRAX_PB_LEDS
-	move.b	$r2, [R_PORT_PB_DATA]	
+	move.b	$r2, [R_PORT_PB_DATA]
 #endif
 #ifdef CONFIG_ETRAX_90000000_LEDS
 	move.b	$r2, [0x90000000]
 #endif
 #endif
-	
+
 	;; check if we got something on the serial port
-	
+
 	move.b	[SERSTAT], $r0
 	btstq	0, $r0		; data_avail
 	bpl	wait_ser
@@ -295,14 +297,15 @@ wait_ser:
 
 	move.b	[SERRDAT], $r0
 	move.b	$r0, [$r3+]
-	
+
 	subq	1, $r4		; decrease length
 	bne	wait_ser
 	nop
 
 	;; jump into downloaded code
 
-	move.d	RAM_INIT_MAGIC, $r8	; Tell next product that DRAM is initialized
+	move.d	RAM_INIT_MAGIC, $r8	; Tell next product that DRAM is
+					; initialized
 	jump	CODE_START
 
 flash_ok:
@@ -313,7 +316,8 @@ flash_ok:
 	nop
 	move.d	PTABLE_START, $r7; otherwise use the ptable start
 1:
-	move.d	RAM_INIT_MAGIC, $r8	; Tell next product that DRAM is initialized
+	move.d	RAM_INIT_MAGIC, $r8	; Tell next product that DRAM is
+					; initialized
 	jump	$r7		; boot!
 
 
@@ -327,7 +331,8 @@ checksum:
 	moveq	0, $r0
 	moveq   CONFIG_ETRAX_FLASH1_SIZE, $r6
 
-	;; If the first physical flash memory is exceeded wrap to the second one.
+	;; If the first physical flash memory is exceeded wrap to the
+	;; second one
 	btstq	26, $r1		; Are we addressing first flash?
 	bpl	1f
 	nop
@@ -351,3 +356,5 @@ checksum:
 3:	move.d	MEM_CSE1_START, $r1 ; wrap to second flash
 	ba	2b
 	nop
+
+#endif

arch/cris/arch-v10/boot/rescue/kimagerescue.S

-/* $Id: kimagerescue.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $
- * 
+/*
  * Rescue code to be prepended on a kimage and copied to the
  * rescue serial port.
  * This is called from the rescue code, it will copy received data to
@@ -7,13 +6,13 @@
  */
 
 #define ASSEMBLER_MACROS_ONLY
-#include <asm/sv_addr_ag.h>
+#include <asm/arch/sv_addr_ag.h>
 
 #define CODE_START 0x40004000
 #define CODE_LENGTH 784
 #define TIMEOUT_VALUE 1000
-	
-		
+
+
 #ifdef CONFIG_ETRAX_RESCUE_SER0
 #define SERXOFF R_SERIAL0_XOFF
 #define SERBAUD R_SERIAL0_BAUD
@@ -34,7 +33,7 @@
 #define SERRECC R_SERIAL2_REC_CTRL
 #define SERRDAT R_SERIAL2_REC_DATA
 #define SERSTAT R_SERIAL2_STATUS
-#endif	
+#endif
 #ifdef CONFIG_ETRAX_RESCUE_SER3
 #define SERXOFF R_SERIAL3_XOFF
 #define SERBAUD R_SERIAL3_BAUD
@@ -48,54 +47,55 @@
 	;; 0x80000000 if loaded in flash (as it should be)
 	;; since etrax actually starts at address 2 when booting from flash, we
 	;; put a nop (2 bytes) here first so we dont accidentally skip the di
-	
-	nop	
+
+	nop
 	di
-#ifndef CONFIG_SVINTO_SIM	
+#ifndef CONFIG_SVINTO_SIM
 	;; setup port PA and PB default initial directions and data
 	;; (so we can flash LEDs, and so that DTR and others are set)
-	
+
 	move.b	CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0
 	move.b	$r0, [R_PORT_PA_DIR]
 	move.b	CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0
 	move.b	$r0, [R_PORT_PA_DATA]
-	
+
 	move.b	CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0
 	move.b	$r0, [R_PORT_PB_DIR]
 	move.b	CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0
 	move.b	$r0, [R_PORT_PB_DATA]
-	
+
 	;; We need to setup the bus registers before we start using the DRAM
 #include "../../lib/dram_init.S"
-	
+
 #endif
 	;; Setup the stack to a suitably high address.
 	;; We assume 8 MB is the minimum DRAM in an eLinux
 	;; product and put the sp at the top for now.
 
 	move.d	0x40800000, $sp
-	
+
 	;; setup the serial port at 115200 baud
-	
+
 	moveq	0, $r0
-	move.d	$r0, [SERXOFF] 
+	move.d	$r0, [SERXOFF]
 
 	move.b	0x99, $r0
-	move.b	$r0, [SERBAUD]		; 115.2kbaud for both transmit and receive
+	move.b	$r0, [SERBAUD]		; 115.2kbaud for both transmit
+					; and receive
 
 	move.b	0x40, $r0		; rec enable
-	move.b	$r0, [SERRECC] 
+	move.b	$r0, [SERRECC]
 
 
-	moveq	0, $r1		; "timer" to clock out a LED red flash
-	move.d	CODE_START, $r3	; destination counter
+	moveq	0, $r1			; "timer" to clock out a LED red flash
+	move.d	CODE_START, $r3		; destination counter
 	move.d	CODE_LENGTH, $r4	; length
 	move.d	TIMEOUT_VALUE, $r5	; "timeout" until jump
 
 wait_ser:
 	addq	1, $r1
-	subq	1, $r5		; decrease timeout
-	beq	jump_start	; timed out
+	subq	1, $r5			; decrease timeout
+	beq	jump_start		; timed out
 	nop
 #ifndef CONFIG_ETRAX_NO_LEDS
 #ifdef CONFIG_ETRAX_PA_LEDS
@@ -111,21 +111,21 @@ wait_ser:
 	or.d	$r0, $r2		; set bit
 	ba	2f
 	nop
-1:	not	$r0		; clear bit
+1:	not	$r0			; clear bit
 	and.d	$r0, $r2
-2:	
+2:
 #ifdef CONFIG_ETRAX_PA_LEDS
 	move.b	$r2, [R_PORT_PA_DATA]
-#endif	
+#endif
 #ifdef CONFIG_ETRAX_PB_LEDS
 	move.b	$r2, [R_PORT_PB_DATA]
 #endif
 #endif
-		
+
 	;; check if we got something on the serial port
-	
+
 	move.b	[SERSTAT], $r0
-	btstq	0, $r0		; data_avail
+	btstq	0, $r0			; data_avail
 	bpl	wait_ser
 	nop
 
@@ -134,7 +134,7 @@ wait_ser:
 	move.b	[SERRDAT], $r0
 	move.b	$r0, [$r3+]
 	move.d	TIMEOUT_VALUE, $r5	; reset "timeout"
-	subq	1, $r4		; decrease length
+	subq	1, $r4			; decrease length
 	bne	wait_ser
 	nop
 jump_start:

arch/cris/arch-v10/boot/rescue/testrescue.S

-/* $Id: testrescue.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $
- *
+/*
  * Simple testcode to download by the rescue block.
- * Just lits some LEDs to show it was downloaded correctly.
- * 
+ * Just lights some LEDs to show it was downloaded correctly.
+ *
  * Copyright (C) 1999 Axis Communications AB
  */
 
 #define ASSEMBLER_MACROS_ONLY
-#include <asm/sv_addr_ag.h>
+#include <asm/arch/sv_addr_ag.h>
 
 	.text
 
@@ -16,11 +15,10 @@
 	moveq	-1, $r2
 	move.b	$r2, [R_PORT_PA_DIR]
 	moveq	0, $r2
-	move.b	$r2, [R_PORT_PA_DATA]	
+	move.b	$r2, [R_PORT_PA_DATA]
 
 endless:
 	nop
 	ba	endless
 	nop
 
-	

arch/cris/arch-v10/drivers/Kconfig

@@ -9,37 +9,6 @@ config ETRAX_ETHERNET
 	  This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet
 	  controller.
 
-choice
-	prompt "Network LED behavior"
-	depends on ETRAX_ETHERNET
-	default ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY
-
-config ETRAX_NETWORK_LED_ON_WHEN_LINK
-	bool "LED_on_when_link"
-	help
-	  Selecting LED_on_when_link will light the LED when there is a
-	  connection and will flash off when there is activity.
-
-	  Selecting LED_on_when_activity will light the LED only when
-	  there is activity.
-
-	  This setting will also affect the behaviour of other activity LEDs
-	  e.g. Bluetooth.
-
-config ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY
-	bool "LED_on_when_activity"
-	help
-	  Selecting LED_on_when_link will light the LED when there is a
-	  connection and will flash off when there is activity.
-
-	  Selecting LED_on_when_activity will light the LED only when
-	  there is activity.
-
-	  This setting will also affect the behaviour of other activity LEDs
-	  e.g. Bluetooth.
-
-endchoice
-
 config ETRAX_SERIAL
 	bool "Serial-port support"
 	depends on ETRAX_ARCH_V10
@@ -83,32 +52,6 @@ config ETRAX_SERIAL_PORT0
 	  Normally you want this on, unless you use external DMA 1 that uses
 	  the same DMA channels.
 
-choice
-	prompt "Ser0 DMA out assignment"
-	depends on ETRAX_SERIAL_PORT0
-	default ETRAX_SERIAL_PORT0_DMA6_OUT
-
-config ETRAX_SERIAL_PORT0_NO_DMA_OUT
-	bool "No DMA out"
-
-config ETRAX_SERIAL_PORT0_DMA6_OUT
-	bool "DMA 6"
-
-endchoice
-
-choice
-	prompt "Ser0 DMA in assignment"
-	depends on ETRAX_SERIAL_PORT0
-	default ETRAX_SERIAL_PORT0_DMA7_IN
-
-config ETRAX_SERIAL_PORT0_NO_DMA_IN
-	bool "No DMA in"
-
-config ETRAX_SERIAL_PORT0_DMA7_IN
-	bool "DMA 7"
-
-endchoice
-
 choice
 	prompt "Ser0 DTR, RI, DSR and CD assignment"
 	depends on ETRAX_SERIAL_PORT0
@@ -197,32 +140,6 @@ config ETRAX_SERIAL_PORT1
 	help
 	  Enables the ETRAX 100 serial driver for ser1 (ttyS1).
 
-choice
-	prompt "Ser1 DMA out assignment"
-	depends on ETRAX_SERIAL_PORT1
-	default ETRAX_SERIAL_PORT1_DMA8_OUT
-
-config ETRAX_SERIAL_PORT1_NO_DMA_OUT
-	bool "No DMA out"
-
-config ETRAX_SERIAL_PORT1_DMA8_OUT
-	bool "DMA 8"
-
-endchoice
-
-choice
-	prompt "Ser1 DMA in assignment"
-	depends on ETRAX_SERIAL_PORT1
-	default ETRAX_SERIAL_PORT1_DMA9_IN
-
-config ETRAX_SERIAL_PORT1_NO_DMA_IN
-	bool "No DMA in"
-
-config ETRAX_SERIAL_PORT1_DMA9_IN
-	bool "DMA 9"
-
-endchoice
-
 choice
 	prompt "Ser1 DTR, RI, DSR and CD assignment"
 	depends on ETRAX_SERIAL_PORT1
@@ -314,32 +231,6 @@ config ETRAX_SERIAL_PORT2
 	help
 	  Enables the ETRAX 100 serial driver for ser2 (ttyS2).
 
-choice
-	prompt "Ser2 DMA out assignment"
-	depends on ETRAX_SERIAL_PORT2
-	default ETRAX_SERIAL_PORT2_DMA2_OUT
-
-config ETRAX_SERIAL_PORT2_NO_DMA_OUT
-	bool "No DMA out"
-
-config ETRAX_SERIAL_PORT2_DMA2_OUT
-	bool "DMA 2"
-
-endchoice
-
-choice
-	prompt "Ser2 DMA in assignment"
-	depends on ETRAX_SERIAL_PORT2
-	default ETRAX_SERIAL_PORT2_DMA3_IN
-
-config ETRAX_SERIAL_PORT2_NO_DMA_IN
-	bool "No DMA in"
-
-config ETRAX_SERIAL_PORT2_DMA3_IN
-	bool "DMA 3"
-
-endchoice
-
 choice
 	prompt "Ser2 DTR, RI, DSR and CD assignment"
 	depends on ETRAX_SERIAL_PORT2
@@ -428,32 +319,6 @@ config ETRAX_SERIAL_PORT3
 	help
 	  Enables the ETRAX 100 serial driver for ser3 (ttyS3).
 
-choice
-	prompt "Ser3 DMA out assignment"
-	depends on ETRAX_SERIAL_PORT3
-	default ETRAX_SERIAL_PORT3_DMA4_OUT
-
-config ETRAX_SERIAL_PORT3_NO_DMA_OUT
-	bool "No DMA out"
-
-config ETRAX_SERIAL_PORT3_DMA4_OUT
-	bool "DMA 4"
-
-endchoice
-
-choice
-	prompt "Ser3 DMA in assignment"
-	depends on ETRAX_SERIAL_PORT3
-	default ETRAX_SERIAL_PORT3_DMA5_IN
-
-config ETRAX_SERIAL_PORT3_NO_DMA_IN
-	bool "No DMA in"
-
-config ETRAX_SERIAL_PORT3_DMA5_IN
-	bool "DMA 5"
-
-endchoice
-
 choice
 	prompt "Ser3 DTR, RI, DSR and CD assignment"
 	depends on ETRAX_SERIAL_PORT3
@@ -563,21 +428,6 @@ config ETRAX_USB_HOST_PORT2
 	depends on ETRAX_USB_HOST
 	default n
 
-config ETRAX_AXISFLASHMAP
-	bool "Axis flash-map support"
-	depends on ETRAX_ARCH_V10
-	select MTD
-	select MTD_CFI
-	select MTD_CFI_AMDSTD
-	select MTD_CHAR
-	select MTD_BLOCK
-	select MTD_PARTITIONS
-	select MTD_CONCAT
-	select MTD_COMPLEX_MAPPINGS
-	help
-	  This option enables MTD mapping of flash devices.  Needed to use
-	  flash memories.  If unsure, say Y.
-
 config ETRAX_PTABLE_SECTOR
 	int "Byte-offset of partition table sector"
 	depends on ETRAX_AXISFLASHMAP
@@ -731,37 +581,6 @@ config ETRAX_PB_CHANGEABLE_BITS
 	  Bit set = changeable.
 	  You probably want 00 here.
 
-config ETRAX_RTC
-	bool "Real Time Clock support"
-	depends on ETRAX_ARCH_V10
-	help
-	  Enables drivers for the Real-Time Clock battery-backed chips on
-	  some products. The kernel reads the time when booting, and
-	  the date can be set using ioctl(fd, RTC_SET_TIME, &rt) with rt a
-	  rtc_time struct (see <file:include/asm-cris/rtc.h>) on the /dev/rtc
-	  device, major 121.  You can check the time with cat /proc/rtc, but
-	  normal time reading should be done using libc function time and
-	  friends.
-
-choice
-	prompt "RTC chip"
-	depends on ETRAX_RTC
-	default ETRAX_DS1302
-
-config ETRAX_DS1302
-	bool "DS1302"
-	help
-	  Enables the driver for the DS1302 Real-Time Clock battery-backed
-	  chip on some products.
-
-config ETRAX_PCF8563
-	bool "PCF8563"
-	help
-	  Enables the driver for the PCF8563 Real-Time Clock battery-backed
-	  chip on some products.
-
-endchoice
-
 config ETRAX_DS1302_RST_ON_GENERIC_PORT
 	bool "DS1302 RST on Generic Port"
 	depends on ETRAX_DS1302

arch/cris/arch-v10/drivers/Makefile

@@ -2,11 +2,11 @@
 # Makefile for Etrax-specific drivers
 #
 
-obj-$(CONFIG_ETRAX_AXISFLASHMAP)        += axisflashmap.o
-obj-$(CONFIG_ETRAX_I2C) 	        += i2c.o
-obj-$(CONFIG_ETRAX_I2C_EEPROM)          += eeprom.o
-obj-$(CONFIG_ETRAX_GPIO) 	        += gpio.o
-obj-$(CONFIG_ETRAX_DS1302)              += ds1302.o
+obj-$(CONFIG_ETRAX_AXISFLASHMAP)	+= axisflashmap.o
+obj-$(CONFIG_ETRAX_I2C)			+= i2c.o
+obj-$(CONFIG_ETRAX_I2C_EEPROM)		+= eeprom.o
+obj-$(CONFIG_ETRAX_GPIO)		+= gpio.o
+obj-$(CONFIG_ETRAX_DS1302)		+= ds1302.o
 obj-$(CONFIG_ETRAX_PCF8563)		+= pcf8563.o
-
+obj-$(CONFIG_ETRAX_SYNCHRONOUS_SERIAL)	+= sync_serial.o
 

arch/cris/arch-v10/drivers/axisflashmap.c

@@ -10,129 +10,6 @@
  * tells us what other partitions to define. If there isn't, we use a default
  * partition split defined below.
  *
- * $Log: axisflashmap.c,v $
- * Revision 1.11  2004/11/15 10:27:14  starvik
- * Corrected typo (Thanks to Milton Miller <miltonm@bga.com>).
- *
- * Revision 1.10  2004/08/16 12:37:22  starvik
- * Merge of Linux 2.6.8
- *
- * Revision 1.8  2004/05/14 07:58:03  starvik
- * Merge of changes from 2.4
- *
- * Revision 1.6  2003/07/04 08:27:37  starvik
- * Merge of Linux 2.5.74
- *
- * Revision 1.5  2002/12/11 13:13:57  starvik
- * Added arch/ to v10 specific includes
- * Added fix from Linux 2.4 in serial.c (flush_to_flip_buffer)
- *
- * Revision 1.4  2002/11/20 11:56:10  starvik
- * Merge of Linux 2.5.48
- *
- * Revision 1.3  2002/11/13 14:54:13  starvik
- * Copied from linux 2.4
- *
- * Revision 1.28  2002/10/01 08:08:43  jonashg
- * The first partition ends at the start of the partition table.
- *
- * Revision 1.27  2002/08/21 09:23:13  jonashg
- * Speling.
- *
- * Revision 1.26  2002/08/21 08:35:20  jonashg
- * Cosmetic change to printouts.
- *
- * Revision 1.25  2002/08/21 08:15:42  jonashg
- * Made it compile even without CONFIG_MTD_CONCAT defined.
- *
- * Revision 1.24  2002/08/20 13:12:35  jonashg
- * * New approach to probing. Probe cse0 and cse1 separately and (mtd)concat
- *   the results.
- * * Removed compile time tests concerning how the mtdram driver has been
- *   configured. The user will know about the misconfiguration at runtime
- *   instead. (The old approach made it impossible to use mtdram for anything
- *   else than RAM boot).
- *
- * Revision 1.23  2002/05/13 12:12:28  johana
- * Allow compile without CONFIG_MTD_MTDRAM but warn at compiletime and
- * be informative at runtime.
- *
- * Revision 1.22  2002/05/13 10:24:44  johana
- * Added #if checks on MTDRAM CONFIG
- *
- * Revision 1.21  2002/05/06 16:05:20  johana
- * Removed debug printout.
- *
- * Revision 1.20  2002/05/06 16:03:00  johana
- * No more cramfs as root hack in generic code.
- * It's handled by axisflashmap using mtdram.
- *
- * Revision 1.19  2002/03/15 17:10:28  bjornw
- * Changed comment about cached access since we changed this before
- *
- * Revision 1.18  2002/03/05 17:06:15  jonashg
- * Try amd_flash probe before cfi_probe since amd_flash driver can handle two
- * (or more) flash chips of different model and the cfi driver cannot.
- *
- * Revision 1.17  2001/11/12 19:42:38  pkj
- * Fixed compiler warnings.
- *
- * Revision 1.16  2001/11/08 11:18:58  jonashg
- * Always read from uncached address to avoid problems with flushing
- * cachelines after write and MTD-erase. No performance loss have been
- * seen yet.
- *
- * Revision 1.15  2001/10/19 12:41:04  jonashg
- * Name of probe has changed in MTD.
- *
- * Revision 1.14  2001/09/21 07:14:10  jonashg
- * Made root filesystem (cramfs) use mtdblock driver when booting from flash.
- *
- * Revision 1.13  2001/08/15 13:57:35  jonashg
- * Entire MTD updated to the linux 2.4.7 version.
- *
- * Revision 1.12  2001/06/11 09:50:30  jonashg
- * Oops, 2MB is 0x200000 bytes.
- *
- * Revision 1.11  2001/06/08 11:39:44  jonashg
- * Changed sizes and offsets in axis_default_partitions to use
- * CONFIG_ETRAX_PTABLE_SECTOR.
- *
- * Revision 1.10  2001/05/29 09:42:03  jonashg
- * Use macro for end marker length instead of sizeof.
- *
- * Revision 1.9  2001/05/29 08:52:52  jonashg
- * Gave names to the magic fours (size of the ptable end marker).
- *
- * Revision 1.8  2001/05/28 15:36:20  jonashg
- * * Removed old comment about ptable location in flash (it's a CONFIG_ option).
- * * Variable ptable was initialized twice to the same value.
- *
- * Revision 1.7  2001/04/05 13:41:46  markusl
- * Updated according to review remarks
- *
- * Revision 1.6  2001/03/07 09:21:21  bjornw
- * No need to waste .data
- *
- * Revision 1.5  2001/03/06 16:27:01  jonashg
- * Probe the entire flash area for flash devices.
- *
- * Revision 1.4  2001/02/23 12:47:15  bjornw
- * Uncached flash in LOW_MAP moved from 0xe to 0x8
- *
- * Revision 1.3  2001/02/16 12:11:45  jonashg
- * MTD driver amd_flash is now included in MTD CVS repository.
- * (It's now in drivers/mtd).
- *
- * Revision 1.2  2001/02/09 11:12:22  jonashg
- * Support for AMD compatible non-CFI flash chips.
- * Only tested with Toshiba TC58FVT160 so far.
- *
- * Revision 1.1  2001/01/12 17:01:18  bjornw
- * * Added axisflashmap.c, a physical mapping for MTD that reads and understands
- *   Axis partition-table format.
- *
- *
  */
 
 #include <linux/module.h>
@@ -235,7 +112,7 @@ static struct map_info map_cse1 = {
 };
 
 /* If no partition-table was found, we use this default-set. */
-#define MAX_PARTITIONS         7  
+#define MAX_PARTITIONS         7
 #define NUM_DEFAULT_PARTITIONS 3
 
 /*
@@ -300,6 +177,15 @@ static struct mtd_partition axis_partitions[MAX_PARTITIONS] = {
 	},
 };
 
+#ifdef CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE
+/* Main flash device */
+static struct mtd_partition main_partition = {
+	.name = "main",
+	.size = 0,
+	.offset = 0
+};
+#endif
+
 /*
  * Probe a chip select for AMD-compatible (JEDEC) or CFI-compatible flash
  * chips in that order (because the amd_flash-driver is faster).
@@ -316,15 +202,14 @@ static struct mtd_info *probe_cs(struct map_info *map_cs)
 	mtd_cs = do_map_probe("cfi_probe", map_cs);
 #endif
 #ifdef CONFIG_MTD_JEDECPROBE
-	if (!mtd_cs) {
+	if (!mtd_cs)
 		mtd_cs = do_map_probe("jedec_probe", map_cs);
-	}
 #endif
 
 	return mtd_cs;
 }
 
-/* 
+/*
  * Probe each chip select individually for flash chips. If there are chips on
  * both cse0 and cse1, the mtd_info structs will be concatenated to one struct
  * so that MTD partitions can cross chip boundries.
@@ -351,7 +236,7 @@ static struct mtd_info *flash_probe(void)
 	if (mtd_cse0 && mtd_cse1) {
 #ifdef CONFIG_MTD_CONCAT
 		struct mtd_info *mtds[] = { mtd_cse0, mtd_cse1 };
-		
+
 		/* Since the concatenation layer adds a small overhead we
 		 * could try to figure out if the chips in cse0 and cse1 are
 		 * identical and reprobe the whole cse0+cse1 window. But since
@@ -372,7 +257,7 @@ static struct mtd_info *flash_probe(void)
 
 			/* The best we can do now is to only use what we found
 			 * at cse0.
-			 */ 
+			 */
 			mtd_cse = mtd_cse0;
 			map_destroy(mtd_cse1);
 		}
@@ -395,7 +280,7 @@ static int __init init_axis_flash(void)
 	struct partitiontable_head *ptable_head = NULL;
 	struct partitiontable_entry *ptable;
 	int use_default_ptable = 1; /* Until proven otherwise. */
-	const char *pmsg = "  /dev/flash%d at 0x%08x, size 0x%08x\n";
+	const char pmsg[] = "  /dev/flash%d at 0x%08x, size 0x%08x\n";
 
 	if (!(mymtd = flash_probe())) {
 		/* There's no reason to use this module if no flash chip can
@@ -435,7 +320,7 @@ static int __init init_axis_flash(void)
 		unsigned long offset = CONFIG_ETRAX_PTABLE_SECTOR;
 		unsigned char *p;
 		unsigned long csum = 0;
-		
+
 		ptable = (struct partitiontable_entry *)
 			((unsigned long)ptable_head + sizeof(*ptable_head));
 
@@ -490,6 +375,16 @@ static int __init init_axis_flash(void)
 		pidx++;
 	}
 
+#ifdef CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE
+	if (mymtd) {
+		main_partition.size = mymtd->size;
+		err = add_mtd_partitions(mymtd, &main_partition, 1);
+		if (err)
+			panic("axisflashmap: Could not initialize "
+			      "partition for whole main mtd device!\n");
+	}
+#endif
+
         if (mymtd) {
 		if (use_default_ptable) {
 			printk(KERN_INFO " Using default partition table.\n");
@@ -499,9 +394,8 @@ static int __init init_axis_flash(void)
 			err = add_mtd_partitions(mymtd, axis_partitions, pidx);
 		}
 
-		if (err) {
+		if (err)
 			panic("axisflashmap could not add MTD partitions!\n");
-		}
 	}
 
 	if (!romfs_in_flash) {
@@ -515,25 +409,24 @@ static int __init init_axis_flash(void)
 #else
 		struct mtd_info *mtd_ram;
 
-		mtd_ram = kmalloc(sizeof(struct mtd_info),
-						     GFP_KERNEL);
-		if (!mtd_ram) {
+		mtd_ram = kmalloc(sizeof(struct mtd_info), GFP_KERNEL);
+		if (!mtd_ram)
 			panic("axisflashmap couldn't allocate memory for "
 			      "mtd_info!\n");
-		}
 
 		printk(KERN_INFO " Adding RAM partition for romfs image:\n");
-		printk(pmsg, pidx, romfs_start, romfs_length);
-
-		err = mtdram_init_device(mtd_ram, (void*)romfs_start, 
-		                         romfs_length, "romfs");
-		if (err) {
+		printk(pmsg, pidx, (unsigned)romfs_start,
+			(unsigned)romfs_length);
+
+		err = mtdram_init_device(mtd_ram,
+			(void *)romfs_start,
+			romfs_length,
+			"romfs");
+		if (err)
 			panic("axisflashmap could not initialize MTD RAM "
 			      "device!\n");
-		}
 #endif
 	}
-
 	return err;
 }
 

arch/cris/arch-v10/drivers/ds1302.c

@@ -333,7 +333,7 @@ rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 			ds1302_writereg(RTC_TRICKLECHARGER, tcs_val);
 			return 0;
 		}
-		case RTC_VLOW_RD:
+		case RTC_VL_READ:
 		{
 			/* TODO:
 			 * Implement voltage low detection support
@@ -342,7 +342,7 @@ rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 			       " is not supported\n");
 			return 0;
 		}
-		case RTC_VLOW_SET:
+		case RTC_VL_CLR:
 		{
 			/* TODO:
 			 * Nothing to do since Voltage Low detection is not supported

arch/cris/arch-v10/drivers/eeprom.c

@@ -19,77 +19,6 @@
 *!  Sep  03 1999  Edgar Iglesias    Added bail-out stuff if we get interrupted
 *!                                  in the spin-lock.
 *!
-*!  $Log: eeprom.c,v $
-*!  Revision 1.12  2005/06/19 17:06:46  starvik
-*!  Merge of Linux 2.6.12.
-*!
-*!  Revision 1.11  2005/01/26 07:14:46  starvik
-*!  Applied diff from kernel janitors (Nish Aravamudan).
-*!
-*!  Revision 1.10  2003/09/11 07:29:48  starvik
-*!  Merge of Linux 2.6.0-test5
-*!
-*!  Revision 1.9  2003/07/04 08:27:37  starvik
-*!  Merge of Linux 2.5.74
-*!
-*!  Revision 1.8  2003/04/09 05:20:47  starvik
-*!  Merge of Linux 2.5.67
-*!
-*!  Revision 1.6  2003/02/10 07:19:28  starvik
-*!  Removed misplaced ;
-*!
-*!  Revision 1.5  2002/12/11 13:13:57  starvik
-*!  Added arch/ to v10 specific includes
-*!  Added fix from Linux 2.4 in serial.c (flush_to_flip_buffer)
-*!
-*!  Revision 1.4  2002/11/20 11:56:10  starvik
-*!  Merge of Linux 2.5.48
-*!
-*!  Revision 1.3  2002/11/18 13:16:06  starvik
-*!  Linux 2.5 port of latest 2.4 drivers
-*!
-*!  Revision 1.8  2001/06/15 13:24:29  jonashg
-*!  * Added verification of pointers from userspace in read and write.
-*!  * Made busy counter volatile.
-*!  * Added define for initial write delay.
-*!  * Removed warnings by using loff_t instead of unsigned long.
-*!
-*!  Revision 1.7  2001/06/14 15:26:54  jonashg
-*!  Removed test because condition is always true.
-*!
-*!  Revision 1.6  2001/06/14 15:18:20  jonashg
-*!  Kb -> kB (makes quite a difference if you don't know if you have 2k or 16k).
-*!
-*!  Revision 1.5  2001/06/14 14:39:51  jonashg
-*!  Forgot to use name when registering the driver.
-*!
-*!  Revision 1.4  2001/06/14 14:35:47  jonashg
-*!  * Gave driver a name and used it in printk's.
-*!  * Cleanup.
-*!
-*!  Revision 1.3  2001/03/19 16:04:46  markusl
-*!  Fixed init of fops struct
-*!
-*!  Revision 1.2  2001/03/19 10:35:07  markusl
-*!  2.4 port of eeprom driver
-*!
-*!  Revision 1.8  2000/05/18 10:42:25  edgar
-*!  Make sure to end write cycle on _every_ write
-*!
-*!  Revision 1.7  2000/01/17 17:41:01  johana
-*!  Adjusted probing and return -ENOSPC when writing outside EEPROM
-*!
-*!  Revision 1.6  2000/01/17 15:50:36  johana
-*!  Added adaptive timing adjustments and fixed autoprobing for 2k and 16k(?)
-*!  EEPROMs
-*!
-*!  Revision 1.5  1999/09/03 15:07:37  edgar
-*!  Added bail-out check to the spinlock
-*!
-*!  Revision 1.4  1999/09/03 12:11:17  bjornw
-*!  Proper atomicity (need to use spinlocks, not if's). users -> busy.
-*!
-*!
 *!        (c) 1999 Axis Communications AB, Lund, Sweden
 *!*****************************************************************************/
 
@@ -103,10 +32,10 @@
 #include <asm/uaccess.h>
 #include "i2c.h"
 
-#define D(x) 
+#define D(x)
 
 /* If we should use adaptive timing or not: */
-//#define EEPROM_ADAPTIVE_TIMING      
+/* #define EEPROM_ADAPTIVE_TIMING */
 
 #define EEPROM_MAJOR_NR 122  /* use a LOCAL/EXPERIMENTAL major for now */
 #define EEPROM_MINOR_NR 0

arch/cris/arch-v10/drivers/i2c.c

@@ -6,85 +6,9 @@
 *!              kernel modules (i2c_writereg/readreg) and from userspace using
 *!              ioctl()'s
 *!
-*! Nov 30 1998  Torbjorn Eliasson  Initial version.
-*!              Bjorn Wesen        Elinux kernel version.
-*! Jan 14 2000  Johan Adolfsson    Fixed PB shadow register stuff - 
-*!                                 don't use PB_I2C if DS1302 uses same bits,
-*!                                 use PB.
-*! $Log: i2c.c,v $
-*! Revision 1.13  2005/03/07 13:13:07  starvik
-*! Added spinlocks to protect states etc
-*!
-*! Revision 1.12  2005/01/05 06:11:22  starvik
-*! No need to do local_irq_disable after local_irq_save.
-*!
-*! Revision 1.11  2004/12/13 12:21:52  starvik
-*! Added I/O and DMA allocators from Linux 2.4
-*!
-*! Revision 1.9  2004/08/24 06:49:14  starvik
-*! Whitespace cleanup
-*!
-*! Revision 1.8  2004/06/08 08:48:26  starvik
-*! Removed unused code
-*!
-*! Revision 1.7  2004/05/28 09:26:59  starvik
-*! Modified I2C initialization to work in 2.6.
-*!
-*! Revision 1.6  2004/05/14 07:58:03  starvik
-*! Merge of changes from 2.4
-*!
-*! Revision 1.4  2002/12/11 13:13:57  starvik
-*! Added arch/ to v10 specific includes
-*! Added fix from Linux 2.4 in serial.c (flush_to_flip_buffer)
-*!
-*! Revision 1.3  2002/11/20 11:56:11  starvik
-*! Merge of Linux 2.5.48
-*!
-*! Revision 1.2  2002/11/18 13:16:06  starvik
-*! Linux 2.5 port of latest 2.4 drivers
-*!
-*! Revision 1.9  2002/10/31 15:32:26  starvik
-*! Update Port B register and shadow even when running with hardware support
-*!   to avoid glitches when reading bits
-*! Never set direction to out in i2c_inbyte
-*! Removed incorrect clock toggling at end of i2c_inbyte
-*!
-*! Revision 1.8  2002/08/13 06:31:53  starvik
-*! Made SDA and SCL line configurable
-*! Modified i2c_inbyte to work with PCF8563
-*!
-*! Revision 1.7  2001/04/04 13:11:36  markusl
-*! Updated according to review remarks
-*!
-*! Revision 1.6  2001/03/19 12:43:00  markusl
-*! Made some symbols unstatic (used by the eeprom driver)
-*!
-*! Revision 1.5  2001/02/27 13:52:48  bjornw
-*! malloc.h -> slab.h
-*!
-*! Revision 1.4  2001/02/15 07:17:40  starvik
-*! Corrected usage if port_pb_i2c_shadow
-*!
-*! Revision 1.3  2001/01/26 17:55:13  bjornw
-*! * Made I2C_USES_PB_NOT_PB_I2C a CONFIG option instead of assigning it
-*!   magically. Config.in needs to set it for the options that need it, like
-*!   Dallas 1302 support. Actually, it should be default since it screws up
-*!   the PB bits even if you don't use I2C..
-*! * Include linux/config.h to get the above
-*!
-*! Revision 1.2  2001/01/18 15:49:30  bjornw
-*! 2.4 port of I2C including some cleanups (untested of course)
-*!
-*! Revision 1.1  2001/01/18 15:35:25  bjornw
-*! Verbatim copy of the Etrax i2c driver, 2.0 elinux version
-*!
-*!
-*! ---------------------------------------------------------------------------
-*!
-*! (C) Copyright 1999-2002 Axis Communications AB, LUND, SWEDEN
+*! (C) Copyright 1999-2007 Axis Communications AB, LUND, SWEDEN
 *!
 *!***************************************************************************/
-/* $Id: i2c.c,v 1.13 2005/03/07 13:13:07 starvik Exp $ */
 
 /****************** INCLUDE FILES SECTION ***********************************/
 
@@ -622,7 +546,7 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg)
 		 * last received byte needs to be nacked
 		 * instead of acked
 		 */
-		i2c_sendack();
+		i2c_sendnack();
 		/*
 		 * end sequence
 		 */
@@ -708,6 +632,7 @@ i2c_init(void)
 	if (!first) {
 		return res;
 	}
+	first = 0;
 
 	/* Setup and enable the Port B I2C interface */
 

arch/cris/arch-v10/drivers/pcf8563.c

@@ -8,14 +8,13 @@
  * low detector are also provided. All address and data are transferred
  * serially via two-line bidirectional I2C-bus. Maximum bus speed is
  * 400 kbits/s. The built-in word address register is incremented
- * automatically after each written or read bute.
+ * automatically after each written or read byte.
  *
- * Copyright (c) 2002, Axis Communications AB
+ * Copyright (c) 2002-2007, Axis Communications AB
  * All rights reserved.
  *
  * Author: Tobias Anderberg <tobiasa@axis.com>.
  *
- * $Id: pcf8563.c,v 1.11 2005/03/07 13:13:07 starvik Exp $
  */
 
 #include <linux/module.h>
@@ -27,19 +26,19 @@
 #include <linux/ioctl.h>
 #include <linux/delay.h>
 #include <linux/bcd.h>
-#include <linux/capability.h>
+#include <linux/mutex.h>
 
 #include <asm/uaccess.h>
 #include <asm/system.h>
 #include <asm/io.h>
-#include <asm/arch/svinto.h>
 #include <asm/rtc.h>
+
 #include "i2c.h"
 
-#define PCF8563_MAJOR 121		/* Local major number. */
-#define DEVICE_NAME "rtc"		/* Name which is registered in /proc/devices. */
+#define PCF8563_MAJOR 121	/* Local major number. */
+#define DEVICE_NAME "rtc"	/* Name which is registered in /proc/devices. */
 #define PCF8563_NAME "PCF8563"
-#define DRIVER_VERSION "$Revision: 1.11 $"
+#define DRIVER_VERSION "$Revision: 1.24 $"
 
 /* I2C bus slave registers. */
 #define RTC_I2C_READ		0xa3
@@ -49,71 +48,88 @@
 #define rtc_read(x) i2c_readreg(RTC_I2C_READ, x)
 #define rtc_write(x,y) i2c_writereg(RTC_I2C_WRITE, x, y)
 
-static DEFINE_SPINLOCK(rtc_lock); /* Protect state etc */
-	
+static DEFINE_MUTEX(rtc_lock); /* Protect state etc */
+
 static const unsigned char days_in_month[] =
 	{ 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
 
 int pcf8563_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
 
+/* Cache VL bit value read at driver init since writing the RTC_SECOND
+ * register clears the VL status.
+ */
+static int voltage_low;
+
 static const struct file_operations pcf8563_fops = {
 	.owner = THIS_MODULE,
 	.ioctl = pcf8563_ioctl,
 };
 
 unsigned char
-pcf8563_readreg(int reg) 
+pcf8563_readreg(int reg)
 {
-	unsigned char res = i2c_readreg(RTC_I2C_READ, reg);
-
-	/* The PCF8563 does not return 0 for unimplemented bits */
-	switch(reg)
-	{
-		case RTC_SECONDS:
-		case RTC_MINUTES:
-		     res &= 0x7f;
-		     break;
-		case RTC_HOURS:
-		case RTC_DAY_OF_MONTH:
-		     res &= 0x3f;
-		     break;
-		case RTC_MONTH:
-		     res = (res & 0x1f) - 1;  /* PCF8563 returns month in range 1-12 */
-		     break;
+	unsigned char res = rtc_read(reg);
+
+	/* The PCF8563 does not return 0 for unimplemented bits. */
+	switch (reg) {
+	case RTC_SECONDS:
+	case RTC_MINUTES:
+		res &= 0x7F;
+		break;
+	case RTC_HOURS:
+	case RTC_DAY_OF_MONTH:
+		res &= 0x3F;
+		break;
+	case RTC_WEEKDAY:
+		res &= 0x07;
+		break;
+	case RTC_MONTH:
+		res &= 0x1F;
+		break;
+	case RTC_CONTROL1:
+		res &= 0xA8;
+		break;
+	case RTC_CONTROL2:
+		res &= 0x1F;
+		break;
+	case RTC_CLOCKOUT_FREQ:
+	case RTC_TIMER_CONTROL:
+		res &= 0x83;
+		break;
 	}
 	return res;
 }
 
 void
-pcf8563_writereg(int reg, unsigned char val) 
+pcf8563_writereg(int reg, unsigned char val)
 {
-#ifdef CONFIG_ETRAX_RTC_READONLY
-	if (reg == RTC_CONTROL1 || (reg >= RTC_SECONDS && reg <= RTC_YEAR))
-		return;
-#endif
-
 	rtc_write(reg, val);
 }
 
 void
 get_rtc_time(struct rtc_time *tm)
 {
-	tm->tm_sec = rtc_read(RTC_SECONDS);
-	tm->tm_min = rtc_read(RTC_MINUTES);
+	tm->tm_sec  = rtc_read(RTC_SECONDS);
+	tm->tm_min  = rtc_read(RTC_MINUTES);
 	tm->tm_hour = rtc_read(RTC_HOURS);
 	tm->tm_mday = rtc_read(RTC_DAY_OF_MONTH);
-	tm->tm_mon = rtc_read(RTC_MONTH);
+	tm->tm_wday = rtc_read(RTC_WEEKDAY);
+	tm->tm_mon  = rtc_read(RTC_MONTH);
 	tm->tm_year = rtc_read(RTC_YEAR);
 
-	if (tm->tm_sec & 0x80)
-		printk(KERN_WARNING "%s: RTC Low Voltage - date/time is not reliable!\n", PCF8563_NAME);
+	if (tm->tm_sec & 0x80) {
+		printk(KERN_ERR "%s: RTC Voltage Low - reliable date/time "
+		       "information is no longer guaranteed!\n", PCF8563_NAME);
+	}
 
-	tm->tm_year = BCD_TO_BIN(tm->tm_year) + ((tm->tm_mon & 0x80) ? 100 : 0);
-	tm->tm_sec &= 0x7f;
-	tm->tm_min &= 0x7f;
-	tm->tm_hour &= 0x3f;
-	tm->tm_mday &= 0x3f;
-	tm->tm_mon &= 0x1f;
+	tm->tm_year  = BCD_TO_BIN(tm->tm_year) +
+		       ((tm->tm_mon & 0x80) ? 100 : 0);
+	tm->tm_sec  &= 0x7F;
+	tm->tm_min  &= 0x7F;
+	tm->tm_hour &= 0x3F;
+	tm->tm_mday &= 0x3F;
+	tm->tm_wday &= 0x07; /* Not coded in BCD. */
+	tm->tm_mon  &= 0x1F;
 
 	BCD_TO_BIN(tm->tm_sec);
 	BCD_TO_BIN(tm->tm_min);
@@ -126,17 +142,24 @@ get_rtc_time(struct rtc_time *tm)
 int __init
 pcf8563_init(void)
 {
-	int ret;
-
-	if ((ret = i2c_init())) {
-		printk(KERN_CRIT "pcf8563_init: failed to init i2c\n");
-		return ret;
+	static int res;
+	static int first = 1;
+
+	if (!first)
+		return res;
+	first = 0;
+
+	/* Initiate the i2c protocol. */
+	res = i2c_init();
+	if (res < 0) {
+		printk(KERN_CRIT "pcf8563_init: Failed to init i2c.\n");
+		return res;
 	}
 
 	/*
 	 * First of all we need to reset the chip. This is done by
-	 * clearing control1, control2 and clk freq, clear the 
-	 * Voltage Low bit, and resetting all alarms.
+	 * clearing control1, control2 and clk freq and resetting
+	 * all alarms.
 	 */
 	if (rtc_write(RTC_CONTROL1, 0x00) < 0)
 		goto err;
@@ -147,34 +170,36 @@ pcf8563_init(void)
 	if (rtc_write(RTC_CLOCKOUT_FREQ, 0x00) < 0)
 		goto err;
 
-	/* Clear the VL bit in the seconds register. */
-	ret = rtc_read(RTC_SECONDS);
-	
-	if (rtc_write(RTC_SECONDS, (ret & 0x7f)) < 0)
+	if (rtc_write(RTC_TIMER_CONTROL, 0x03) < 0)
 		goto err;
-		
+
 	/* Reset the alarms. */
-	if (rtc_write(RTC_MINUTE_ALARM, 0x00) < 0)
+	if (rtc_write(RTC_MINUTE_ALARM, 0x80) < 0)
 		goto err;
-	
-	if (rtc_write(RTC_HOUR_ALARM, 0x00) < 0)
+
+	if (rtc_write(RTC_HOUR_ALARM, 0x80) < 0)
 		goto err;
-	
-	if (rtc_write(RTC_DAY_ALARM, 0x00) < 0)
+
+	if (rtc_write(RTC_DAY_ALARM, 0x80) < 0)
 		goto err;
-	
-	if (rtc_write(RTC_WEEKDAY_ALARM, 0x00) < 0)
+
+	if (rtc_write(RTC_WEEKDAY_ALARM, 0x80) < 0)
 		goto err;
-        
-	/* Check for low voltage, and warn about it.. */
-	if (rtc_read(RTC_SECONDS) & 0x80)
-		printk(KERN_WARNING "%s: RTC Low Voltage - date/time is not reliable!\n", PCF8563_NAME);
-	
-	return 0;
+
+	/* Check for low voltage, and warn about it. */
+	if (rtc_read(RTC_SECONDS) & 0x80) {
+		voltage_low = 1;
+		printk(KERN_WARNING "%s: RTC Voltage Low - reliable "
+		       "date/time information is no longer guaranteed!\n",
+		       PCF8563_NAME);
+	}
+
+	return res;
 
 err:
 	printk(KERN_INFO "%s: Error initializing chip.\n", PCF8563_NAME);
-	return -1;
+	res = -1;
+	return res;
 }
 
 void __exit
@@ -187,8 +212,8 @@ pcf8563_exit(void)
  * ioctl calls for this driver. Why return -ENOTTY upon error? Because
  * POSIX says so!
  */
-int
-pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg)
+int pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
+	unsigned long arg)
 {
 	/* Some sanity checks. */
 	if (_IOC_TYPE(cmd) != RTC_MAGIC)
@@ -198,124 +223,146 @@ pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned
 		return -ENOTTY;
 
 	switch (cmd) {
-		case RTC_RD_TIME:
-			{
-				struct rtc_time tm;
-
-				spin_lock(&rtc_lock);
-				get_rtc_time(&tm);
-
-				if (copy_to_user((struct rtc_time *) arg, &tm, sizeof(struct rtc_time))) {
-					spin_unlock(&rtc_lock);
-					return -EFAULT;
-				}
-
-				spin_unlock(&rtc_lock);
-				return 0;
-			}
-			break;
-		case RTC_SET_TIME:
-			{
-#ifdef CONFIG_ETRAX_RTC_READONLY
-				return -EPERM;
-#else
-				int leap;
-				int century;
-				struct rtc_time tm;
-
-				memset(&tm, 0, sizeof (struct rtc_time));
-				if (!capable(CAP_SYS_TIME))
-					return -EPERM;
-
-				if (copy_from_user(&tm, (struct rtc_time *) arg, sizeof(struct rtc_time)))
-					return -EFAULT;
-
-				/* Convert from struct tm to struct rtc_time. */
-				tm.tm_year += 1900;
-				tm.tm_mon += 1;
-				
-				leap = ((tm.tm_mon == 2) && ((tm.tm_year % 4) == 0)) ? 1 : 0;
-
-				/* Perform some sanity checks. */
-				if ((tm.tm_year < 1970) ||
-				    (tm.tm_mon > 12) ||
-				    (tm.tm_mday == 0) ||
-				    (tm.tm_mday > days_in_month[tm.tm_mon] + leap) ||
-				    (tm.tm_hour >= 24) ||
-				    (tm.tm_min >= 60) ||
-				    (tm.tm_sec >= 60))
-					return -EINVAL;
-
-				century = (tm.tm_year >= 2000) ? 0x80 : 0;
-				tm.tm_year = tm.tm_year % 100;
-
-				BIN_TO_BCD(tm.tm_year);
-				BIN_TO_BCD(tm.tm_mday);
-				BIN_TO_BCD(tm.tm_hour);
-				BIN_TO_BCD(tm.tm_min);
-				BIN_TO_BCD(tm.tm_sec);
-				tm.tm_mon |= century;
-
-				spin_lock(&rtc_lock);
-				
-				rtc_write(RTC_YEAR, tm.tm_year);
-				rtc_write(RTC_MONTH, tm.tm_mon);
-				rtc_write(RTC_DAY_OF_MONTH, tm.tm_mday);
-				rtc_write(RTC_HOURS, tm.tm_hour);
-				rtc_write(RTC_MINUTES, tm.tm_min);
-				rtc_write(RTC_SECONDS, tm.tm_sec);
-
-				spin_unlock(&rtc_lock);
-
-				return 0;
-#endif /* !CONFIG_ETRAX_RTC_READONLY */
-			}
-
-		case RTC_VLOW_RD:
-		{
-			int vl_bit = 0;
-
-			if (rtc_read(RTC_SECONDS) & 0x80) {
-				vl_bit = 1;
-				printk(KERN_WARNING "%s: RTC Voltage Low - reliable "
-				       "date/time information is no longer guaranteed!\n",
-				       PCF8563_NAME);
-			}
-			if (copy_to_user((int *) arg, &vl_bit, sizeof(int)))
-				return -EFAULT;
-
-			return 0;
-		}
+	case RTC_RD_TIME:
+	{
+		struct rtc_time tm;
 
-		case RTC_VLOW_SET:
-		{
-			/* Clear the VL bit in the seconds register */
-			int ret = rtc_read(RTC_SECONDS);
+		mutex_lock(&rtc_lock);
+		memset(&tm, 0, sizeof tm);
+		get_rtc_time(&tm);
 
-			rtc_write(RTC_SECONDS, (ret & 0x7F));
+		if (copy_to_user((struct rtc_time *) arg, &tm,
+				 sizeof tm)) {
+			spin_unlock(&rtc_lock);
+			return -EFAULT;
+		}
+
+		mutex_unlock(&rtc_lock);
 
-			return 0;
+		return 0;
+	}
+	case RTC_SET_TIME:
+	{
+		int leap;
+		int year;
+		int century;
+		struct rtc_time tm;
+
+		memset(&tm, 0, sizeof tm);
+		if (!capable(CAP_SYS_TIME))
+			return -EPERM;
+
+		if (copy_from_user(&tm, (struct rtc_time *) arg, sizeof tm))
+			return -EFAULT;
+
+		/* Convert from struct tm to struct rtc_time. */
+		tm.tm_year += 1900;
+		tm.tm_mon += 1;
+
+		/*
+		 * Check if tm.tm_year is a leap year. A year is a leap
+		 * year if it is divisible by 4 but not 100, except
+		 * that years divisible by 400 _are_ leap years.
+		 */
+		year = tm.tm_year;
+		leap = (tm.tm_mon == 2) &&
+			((year % 4 == 0 && year % 100 != 0) || year % 400 == 0);
+
+		/* Perform some sanity checks. */
+		if ((tm.tm_year < 1970) ||
+		    (tm.tm_mon > 12) ||
+		    (tm.tm_mday == 0) ||
+		    (tm.tm_mday > days_in_month[tm.tm_mon] + leap) ||
+		    (tm.tm_wday >= 7) ||
+		    (tm.tm_hour >= 24) ||
+		    (tm.tm_min >= 60) ||
+		    (tm.tm_sec >= 60))
+			return -EINVAL;
+
+		century = (tm.tm_year >= 2000) ? 0x80 : 0;
+		tm.tm_year = tm.tm_year % 100;
+
+		BIN_TO_BCD(tm.tm_year);
+		BIN_TO_BCD(tm.tm_mon);
+		BIN_TO_BCD(tm.tm_mday);
+		BIN_TO_BCD(tm.tm_hour);
+		BIN_TO_BCD(tm.tm_min);
+		BIN_TO_BCD(tm.tm_sec);
+		tm.tm_mon |= century;
+
+		mutex_lock(&rtc_lock);
+
+		rtc_write(RTC_YEAR, tm.tm_year);
+		rtc_write(RTC_MONTH, tm.tm_mon);
+		rtc_write(RTC_WEEKDAY, tm.tm_wday); /* Not coded in BCD. */
+		rtc_write(RTC_DAY_OF_MONTH, tm.tm_mday);
+		rtc_write(RTC_HOURS, tm.tm_hour);
+		rtc_write(RTC_MINUTES, tm.tm_min);
+		rtc_write(RTC_SECONDS, tm.tm_sec);
+
+		mutex_unlock(&rtc_lock);
+
+		return 0;
+	}
+	case RTC_VL_READ:
+		if (voltage_low) {
+			printk(KERN_ERR "%s: RTC Voltage Low - "
+			       "reliable date/time information is no "
+			       "longer guaranteed!\n", PCF8563_NAME);
 		}
 
-		default:
-				return -ENOTTY;
+		if (copy_to_user((int *) arg, &voltage_low, sizeof(int)))
+			return -EFAULT;
+		return 0;
+
+	case RTC_VL_CLR:
+	{
+		/* Clear the VL bit in the seconds register in case
+		 * the time has not been set already (which would
+		 * have cleared it). This does not really matter
+		 * because of the cached voltage_low value but do it
+		 * anyway for consistency. */
+
+		int ret = rtc_read(RTC_SECONDS);
+
+		rtc_write(RTC_SECONDS, (ret & 0x7F));
+
+		/* Clear the cached value. */
+		voltage_low = 0;
+
+		return 0;
+	}
+	default:
+		return -ENOTTY;
 	}
 
 	return 0;
 }
 
-static int __init
-pcf8563_register(void)
+static int __init pcf8563_register(void)
 {
-	pcf8563_init();
+	if (pcf8563_init() < 0) {
+		printk(KERN_INFO "%s: Unable to initialize Real-Time Clock "
+		       "Driver, %s\n", PCF8563_NAME, DRIVER_VERSION);
+		return -1;
+	}
+
 	if (register_chrdev(PCF8563_MAJOR, DEVICE_NAME, &pcf8563_fops) < 0) {
 		printk(KERN_INFO "%s: Unable to get major number %d for RTC device.\n",
 		       PCF8563_NAME, PCF8563_MAJOR);
 		return -1;
 	}
 
-	printk(KERN_INFO "%s Real-Time Clock Driver, %s\n", PCF8563_NAME, DRIVER_VERSION);
-        return 0;
+	printk(KERN_INFO "%s Real-Time Clock Driver, %s\n", PCF8563_NAME,
+	       DRIVER_VERSION);
+
+	/* Check for low voltage, and warn about it. */
+	if (voltage_low) {
+		printk(KERN_WARNING "%s: RTC Voltage Low - reliable date/time "
+		       "information is no longer guaranteed!\n", PCF8563_NAME);
+	}
+
+	return 0;
 }
 
 module_init(pcf8563_register);

arch/cris/arch-v10/kernel/debugport.c

 /* Serialport functions for debugging
  *
- * Copyright (c) 2000 Axis Communications AB
+ * Copyright (c) 2000-2007 Axis Communications AB
  *
  * Authors:  Bjorn Wesen
  *
@@ -11,96 +11,6 @@
  *    enableDebugIRQ()
  *    init_etrax_debug()
  *
- * $Log: debugport.c,v $
- * Revision 1.27  2005/06/10 10:34:14  starvik
- * Real console support
- *
- * Revision 1.26  2005/06/07 07:06:07  starvik
- * Added LF->CR translation to make ETRAX customers happy.
- *
- * Revision 1.25  2005/03/08 08:56:47  mikaelam
- * Do only set index as port->index if port is defined, otherwise use the index from the command line
- *
- * Revision 1.24  2005/01/19 10:26:33  mikaelam
- * Return the cris serial driver in console device driver callback function
- *
- * Revision 1.23  2005/01/14 10:12:17  starvik
- * KGDB on separate port.
- * Console fixes from 2.4.
- *
- * Revision 1.22  2005/01/11 16:06:13  starvik
- * typo
- *
- * Revision 1.21  2005/01/11 13:49:14  starvik
- * Added raw_printk to be used where we don't trust the console.
- *
- * Revision 1.20  2004/12/27 11:18:32  starvik
- * Merge of Linux 2.6.10 (not functional yet).
- *
- * Revision 1.19  2004/10/21 07:26:16  starvik
- * Made it possible to specify console settings on kernel command line.
- *
- * Revision 1.18  2004/10/19 13:07:37  starvik
- * Merge of Linux 2.6.9
- *
- * Revision 1.17  2004/09/29 10:33:46  starvik
- * Resolved a dealock when printing debug from kernel.
- *
- * Revision 1.16  2004/08/24 06:12:19  starvik
- * Whitespace cleanup
- *
- * Revision 1.15  2004/08/16 12:37:19  starvik
- * Merge of Linux 2.6.8
- *
- * Revision 1.14  2004/05/17 13:11:29  starvik
- * Disable DMA until real serial driver is up
- *
- * Revision 1.13  2004/05/14 07:58:01  starvik
- * Merge of changes from 2.4
- *
- * Revision 1.12  2003/09/11 07:29:49  starvik
- * Merge of Linux 2.6.0-test5
- *
- * Revision 1.11  2003/07/07 09:53:36  starvik
- * Revert all the 2.5.74 merge changes to make the console work again
- *
- * Revision 1.9  2003/02/17 17:07:23  starvik
- * Solved the problem with corrupted debug output (from Linux 2.4)
- *   * Wait until DMA, FIFO and pipe is empty before and after transmissions
- *   * Buffer data until a FIFO flush can be triggered.
- *
- * Revision 1.8  2003/01/22 06:48:36  starvik
- * Fixed warnings issued by GCC 3.2.1
- *
- * Revision 1.7  2002/12/12 08:26:32  starvik
- * Don't use C-comments inside CVS comments
- *
- * Revision 1.6  2002/12/11 15:42:02  starvik
- * Extracted v10 (ETRAX 100LX) specific stuff from arch/cris/kernel/
- *
- * Revision 1.5  2002/11/20 06:58:03  starvik
- * Compiles with kgdb
- *
- * Revision 1.4  2002/11/19 14:35:24  starvik
- * Changes from linux 2.4
- * Changed struct initializer syntax to the currently preferred notation
- *
- * Revision 1.3  2002/11/06 09:47:03  starvik
- * Modified for new interrupt macros
- *
- * Revision 1.2  2002/01/21 15:21:50  bjornw
- * Update for kdev_t changes
- *
- * Revision 1.6  2001/04/17 13:58:39  orjanf
- * * Renamed CONFIG_KGDB to CONFIG_ETRAX_KGDB.
- *
- * Revision 1.5  2001/03/26 14:22:05  bjornw
- * Namechange of some config options
- *
- * Revision 1.4  2000/10/06 12:37:26  bjornw
- * Use physical addresses when talking to DMA
- *
- *
  */
 
 #include <linux/console.h>
@@ -112,6 +22,8 @@
 #include <asm/arch/svinto.h>
 #include <asm/io.h>             /* Get SIMCOUT. */
 
+extern void reset_watchdog(void);
+
 struct dbg_port
 {
   unsigned int index;
@@ -188,7 +100,9 @@ struct dbg_port ports[]=
   }
 };
 
+#ifdef CONFIG_ETRAX_SERIAL
 extern struct tty_driver *serial_driver;
+#endif
 
 struct dbg_port* port =
 #if defined(CONFIG_ETRAX_DEBUG_PORT0)
@@ -368,11 +282,12 @@ console_write_direct(struct console *co, const char *buf, unsigned int len)
 {
 	int i;
 	unsigned long flags;
-	local_irq_save(flags);
 
         if (!port)
 		return;
 
+	local_irq_save(flags);
+
 	/* Send data */
 	for (i = 0; i < len; i++) {
 		/* LF -> CRLF */
@@ -386,26 +301,16 @@ console_write_direct(struct console *co, const char *buf, unsigned int len)
 			;
 		*port->write = buf[i];
 	}
-	local_irq_restore(flags);
-}
 
-int raw_printk(const char *fmt, ...)
-{
-	static char buf[1024];
-	int printed_len;
-	static int first = 1;
-	if (first) {
-		/* Force reinitialization of the port to get manual mode. */
-		port->started = 0;
-		start_port(port);
-		first = 0;
-	}
-	va_list args;
-	va_start(args, fmt);
-	printed_len = vsnprintf(buf, sizeof(buf), fmt, args);
-	va_end(args);
-	console_write_direct(NULL, buf, strlen(buf));
-	return printed_len;
+	/*
+	 * Feed the watchdog, otherwise it will reset the chip during boot.
+	 * The time to send an ordinary boot message line (10-90 chars)
+	 * varies between 1-8ms at 115200. What makes up for the additional
+	 * 90ms that allows the watchdog to bite?
+	*/
+	reset_watchdog();
+
+	local_irq_restore(flags);
 }
 
 static void
@@ -500,6 +405,7 @@ console_setup(struct console *co, char *options)
 	return 0;
 }
 
+
 /* This is a dummy serial device that throws away anything written to it.
  * This is used when no debug output is wanted.
  */
@@ -555,7 +461,13 @@ etrax_console_device(struct console* co, int *index)
 {
 	if (port)
 		*index = port->index;
+	else
+		*index = 0;
+#ifdef CONFIG_ETRAX_SERIAL
         return port ? serial_driver : &dummy_driver;
+#else
+	return &dummy_driver;
+#endif
 }
 
 static struct console sercons = {

arch/cris/arch-v10/kernel/dma.c

 /* Wrapper for DMA channel allocator that updates DMA client muxing.
- * Copyright 2004, Axis Communications AB
- * $Id: dma.c,v 1.1 2004/12/13 12:21:51 starvik Exp $
+ * Copyright 2004-2007, Axis Communications AB
  */
 
 #include <linux/kernel.h>

arch/cris/arch-v10/kernel/entry.S

-/* $Id: entry.S,v 1.28 2005/06/20 05:06:30 starvik Exp $
- *
+/*
  *  linux/arch/cris/entry.S
  *
  *  Copyright (C) 2000, 2001, 2002 Axis Communications AB
  *
  *  Authors:	Bjorn Wesen (bjornw@axis.com)
- *
- *  $Log: entry.S,v $
- *  Revision 1.28  2005/06/20 05:06:30  starvik
- *  Remove unnecessary diff to kernel.org tree
- *
- *  Revision 1.27  2005/03/04 08:16:16  starvik
- *  Merge of Linux 2.6.11.
- *
- *  Revision 1.26  2005/01/11 13:49:47  starvik
- *  Added NMI handler.
- *
- *  Revision 1.25  2004/12/27 11:18:32  starvik
- *  Merge of Linux 2.6.10 (not functional yet).
- *
- *  Revision 1.24  2004/12/22 10:41:23  starvik
- *  Updates to make v10 compile with the latest SMP aware generic code (even
- *  though v10 will never have SMP).
- *
- *  Revision 1.23  2004/10/19 13:07:37  starvik
- *  Merge of Linux 2.6.9
- *
- *  Revision 1.22  2004/06/21 10:29:55  starvik
- *  Merge of Linux 2.6.7
- *
- *  Revision 1.21  2004/06/09 05:30:27  starvik
- *  Clean up multiple interrupt handling.
- *    Prevent interrupts from interrupting each other.
- *    Handle all active interrupts.
- *
- *  Revision 1.20  2004/06/08 08:55:32  starvik
- *  Removed unused code
- *
- *  Revision 1.19  2004/06/04 11:56:15  starvik
- *  Implemented page table lookup for refills in assembler for improved performance.
- *
- *  Revision 1.18  2004/05/11 12:28:25  starvik
- *  Merge of Linux 2.6.6
- *
- *  Revision 1.17  2003/09/11 07:29:49  starvik
- *  Merge of Linux 2.6.0-test5
- *
- *  Revision 1.16  2003/07/04 08:27:41  starvik
- *  Merge of Linux 2.5.74
- *
- *  Revision 1.15  2003/04/09 07:32:55  starvik
- *  resume should return task_struct, not thread_info
- *
- *  Revision 1.14  2003/04/09 05:20:44  starvik
- *  Merge of Linux 2.5.67
- *
- *  Revision 1.13  2002/12/11 15:42:02  starvik
- *  Extracted v10 (ETRAX 100LX) specific stuff from arch/cris/kernel/*.c
- *
- *  Revision 1.12  2002/12/10 09:00:10  starvik
- *  Merge of Linux 2.5.51
- *
- *  Revision 1.11  2002/12/05 07:53:10  starvik
- *  Corrected constants used with btstq
- *
- *  Revision 1.10  2002/11/27 08:45:10  starvik
- *  pid is in task_struct, not thread_info
- *
- *  Revision 1.9  2002/11/26 09:52:05  starvik
- *  Added preemptive kernel scheduling (if CONFIG_PREEMPT)
- *
- *  Revision 1.8  2002/11/20 11:56:11  starvik
- *  Merge of Linux 2.5.48
- *
- *  Revision 1.7  2002/11/18 13:02:42  starvik
- *  Added fourth parameter to do_notify_resume
- *  Minor cleanup
- *
- *  Revision 1.6  2002/11/11 10:37:50  starvik
- *  Use new asm-offset defines
- *  Modified for new location of current->work etc
- *  Removed SYMBOL_NAME from syscalls
- *  Added some new syscalls
- *
- *  Revision 1.5  2002/11/05 06:45:11  starvik
- *  Merge of Linux 2.5.45
- *
- *  Revision 1.4  2002/02/05 15:41:31  bjornw
- *  Rewritten to conform better to current 2.5 code (similar to arch/i386)
- *
- *  Revision 1.3  2002/01/21 15:22:20  bjornw
- *  NICE_DOGGY fix from 2.4 arch/cris
- *
- *  Revision 1.37  2001/12/07 17:03:55  bjornw
- *  Call a c-hook called watchdog_bite_hook instead of show_registers directly
- *
- *  Revision 1.36  2001/11/22 13:36:36  bjornw
- *  * In ret_from_intr, check regs->dccr for usermode reentrance instead of
- *    DCCR explicitly (because the latter might not reflect current reality)
- *  * In mmu_bus_fault, set $r9 _after_ calling the C-code instead of before
- *    since $r9 is call-clobbered and is potentially needed afterwards
- *
- *  Revision 1.35  2001/10/30 17:10:15  bjornw
- *  Add some syscalls
- *
- *  Revision 1.34  2001/10/01 14:45:03  bjornw
- *  Removed underscores and added register prefixes
- *
- *  Revision 1.33  2001/08/21 13:48:01  jonashg
- *  Added fix by HP to avoid oops when doing a hard_reset_now.
- *
- *  Revision 1.32  2001/08/14 04:32:02  hp
- *  In _resume, add comment why R9 is saved; don't sound like it's call-saved.
- *
- *  Revision 1.31  2001/07/25 16:07:42  bjornw
- *  softirq_active/mask -> softirq_pending only
- *
- *  Revision 1.30  2001/07/05 01:03:32  hp
- *  - include asm/errno.h to get ENOSYS.
- *  - Use ENOSYS, not local constant LENOSYS; tweak comments.
- *  - Explain why .include, not #include is used.
- *  - Make oops-register-dump if watchdog bits and it's not expected.
- *  - Don't jsr, use jump _hard_reset_now, and skip spurious nop.
- *  - Use correct section attribute for section .rodata.
- *  - Adjust sys_ni_syscall fill number.
- *
- *  Revision 1.29  2001/06/25 14:07:00  hp
- *  	Fix review comment.
- *  	* head.S: Use IO_STATE, IO_FIELD and IO_MASK constructs instead of
- *  	magic numbers.  Add comment that -traditional must not be used.
- *  	* entry.S (SYMBOL_NAME): Change redefinition to use ## concatenation.
- *  	Correct and update comment.
- *  	* Makefile (.S.o): Don't use -traditional.  Add comment why the
- *  	toplevel rule can't be used (now that there's a reason).
- *
- *  Revision 1.28  2001/06/21 02:00:40  hp
- *  	* entry.S: Include asm/unistd.h.
- *  	(_sys_call_table): Use section .rodata, not .data.
- *  	(_kernel_thread): Move from...
- *  	* process.c: ... here.
- *  	* entryoffsets.c (VAL): Break out from...
- *  	(OF): Use VAL.
- *  	(LCLONE_VM): New asmified value from CLONE_VM.
- *
- *  Revision 1.27  2001/05/29 11:25:27  markusl
- *  In case of "spurious_interrupt", do hard_reset instead of hanging system in a loop...
- *
- *  Revision 1.26  2001/05/15 15:46:03  bjornw
- *  Include config.h now that we use some CONFIG_ options
- *
- *  Revision 1.25  2001/05/15 05:38:47  hp
- *  Tweaked code in _ret_from_sys_call
- *
- *  Revision 1.24  2001/05/15 05:27:49  hp
- *  Save r9 in r1 over function call rather than on stack.
- *
- *  Revision 1.23  2001/05/15 05:10:00  hp
- *  Generate entry.S structure offsets from C
- *
- *  Revision 1.22  2001/04/17 13:58:39  orjanf
- *  * Renamed CONFIG_KGDB to CONFIG_ETRAX_KGDB.
- *
- *  Revision 1.21  2001/04/17 11:33:29  orjanf
- *  Updated according to review:
- *  * Included asm/sv_addr_ag.h to get macro for internal register.
- *  * Corrected comment regarding system call argument passing.
- *  * Removed comment about instruction being in a delay slot.
- *  * Added comment about SYMBOL_NAME macro.
- *
- *  Revision 1.20  2001/04/12 08:51:07  hp
- *  - Add entry for sys_fcntl64.  In fact copy last piece from i386 including ...
- *  - .rept to fill table to safe state with sys_ni_syscall.
- *
- *  Revision 1.19  2001/04/04 09:43:32  orjanf
- *  * Moved do_sigtrap from traps.c to entry.S.
- *  * LTASK_PID need not be global anymore.
- *
- *  Revision 1.18  2001/03/26 09:25:02  markusl
- *  Updated after review, should now handle USB interrupts correctly.
- *
- *  Revision 1.17  2001/03/21 16:12:55  bjornw
- *  * Always make room for the cpu status record in the frame, in order to
- *    use the same framelength and layout for both mmu busfaults and normal
- *    irqs. No need to check for the explicit CRIS_FRAME_FIXUP type anymore.
- *  * Fixed bug with using addq for popping the stack in the epilogue - it
- *    destroyed the flag register. Use instructions that don't affect the
- *    flag register instead.
- *  * Removed write to R_PORT_PA_DATA during spurious_interrupt
- *
- *  Revision 1.16  2001/03/20 19:43:02  bjornw
- *  * Get rid of esp0 setting
- *  * Give a 7th argument to a systemcall - the stackframe
- *
- *  Revision 1.15  2001/03/05 13:14:30  bjornw
- *  Spelling fix
- *
- *  Revision 1.14  2001/02/23 08:36:36  perf
- *  New ABI; syscallnr=r9, arg5=mof, arg6=srp.
- *  Corrected tracesys call check.
- *
- *  Revision 1.13  2001/02/15 08:40:55  perf
- *  H-P by way of perf;
- *  - (_system_call): Don't read system call function address into r1.
- *  - (RBFExit): There is no such thing as a null pop.  Adjust sp by addq.
- *  - (_system_call): Don't use r10 and don't save and restore it.
- *  - (THREAD_ESP0): New constant.
- *  - (_system_call): Inline set_esp0.
- *
- *  Revision 1.12  2001/01/31 17:56:25  orjanf
- *  Added definition of LTASK_PID and made it global.
- *
- *  Revision 1.11  2001/01/10 21:13:29  bjornw
- *  SYMBOL_NAME is defined incorrectly for the compiler options we currently use
- *
- *  Revision 1.10  2000/12/18 23:47:56  bjornw
- *  * Added syscall trace support (ptrace), completely untested of course
- *  * Removed redundant check for NULL entries in syscall_table
- *
- *  Revision 1.9  2000/11/21 16:40:51  bjornw
- *  * New frame type used when an SBFS frame needs to be popped without
- *    actually restarting the instruction
- *  * Enable interrupts in signal_return (they did so in x86, I hope it's a good
- *    idea)
- *
- *  Revision 1.8  2000/11/17 16:53:35  bjornw
- *  Added detection of frame-type in Rexit, so that mmu_bus_fault can
- *  use ret_from_intr in the return-path to check for signals (like SEGV)
- *  and other foul things that might have occurred during the fault.
- *
- *  Revision 1.7  2000/10/06 15:04:28  bjornw
- *  Include mof in register savings
- *
- *  Revision 1.6  2000/09/12 16:02:44  bjornw
- *  Linux-2.4.0-test7 derived updates
- *
- *  Revision 1.5  2000/08/17 15:35:15  bjornw
- *  2.4.0-test6 changed local_irq_count and friends API
- *
- *  Revision 1.4  2000/08/02 13:59:30  bjornw
- *  Removed olduname and uname from the syscall list
- *
- *  Revision 1.3  2000/07/31 13:32:58  bjornw
- *  * Export ret_from_intr
- *  * _resume updated (prev/last tjohejsan)
- *  * timer_interrupt obsolete
- *  * SIGSEGV detection in mmu_bus_fault temporarily disabled
- *
- *
  */
 
 /*
@@ -1167,9 +924,11 @@ sys_call_table:
 	.long sys_epoll_pwait
 	.long sys_utimensat		/* 320 */
 	.long sys_signalfd
-	.long sys_ni_syscall
+	.long sys_timerfd_create
 	.long sys_eventfd
 	.long sys_fallocate
+	.long sys_timerfd_settime	/* 325 */
+	.long sys_timerfd_gettime
 
         /*
          * NOTE!! This doesn't have to be exact - we just have

arch/cris/arch-v10/kernel/fasttimer.c

@@ -31,15 +31,12 @@
 
 #define DEBUG_LOG_INCLUDED
 #define FAST_TIMER_LOG
-//#define FAST_TIMER_TEST
+/* #define FAST_TIMER_TEST */
 
 #define FAST_TIMER_SANITY_CHECKS
 
 #ifdef FAST_TIMER_SANITY_CHECKS
-#define SANITYCHECK(x) x
 static int sanity_failed;
-#else
-#define SANITYCHECK(x)
 #endif
 
 #define D1(x)
@@ -226,23 +223,19 @@ void start_one_shot_timer(struct fast_timer *t,
   do_gettimeofday_fast(&t->tv_set);
   tmp = fast_timer_list;
 
-  SANITYCHECK({ /* Check so this is not in the list already... */
-    while (tmp != NULL)
-    {
-      if (tmp == t)
-      {
-        printk(KERN_WARNING
-               "timer name: %s data: 0x%08lX already in list!\n", name, data);
-        sanity_failed++;
-				goto done;
-      }
-      else
-      {
-        tmp = tmp->next;
-      }
-    }
-    tmp = fast_timer_list;
-  });
+#ifdef FAST_TIMER_SANITY_CHECKS
+	/* Check so this is not in the list already... */
+	while (tmp != NULL) {
+		if (tmp == t) {
+			printk(KERN_WARNING "timer name: %s data: "
+				"0x%08lX already in list!\n", name, data);
+			sanity_failed++;
+			goto done;
+		} else
+			tmp = tmp->next;
+	}
+	tmp = fast_timer_list;
+#endif
 
   t->delay_us = delay_us;
   t->function = function;

arch/cris/arch-v10/kernel/head.S

-/* $Id: head.S,v 1.10 2005/06/20 05:12:54 starvik Exp $
- * 
+/*
  * Head of the kernel - alter with care
  *
  * Copyright (C) 2000, 2001 Axis Communications AB
  *
  * Authors:	Bjorn Wesen (bjornw@axis.com)
  * 
- * $Log: head.S,v $
- * Revision 1.10  2005/06/20 05:12:54  starvik
- * Remove unnecessary diff to kernel.org tree
- *
- * Revision 1.9  2004/12/13 12:21:51  starvik
- * Added I/O and DMA allocators from Linux 2.4
- *
- * Revision 1.8  2004/11/22 11:41:14  starvik
- * Kernel command line may be supplied to kernel. Not used by Axis but may
- * be used by customers.
- *
- * Revision 1.7  2004/05/14 07:58:01  starvik
- * Merge of changes from 2.4
- *
- * Revision 1.6  2003/04/28 05:31:46  starvik
- * Added section attributes
- *
- * Revision 1.5  2002/12/11 15:42:02  starvik
- * Extracted v10 (ETRAX 100LX) specific stuff from arch/cris/kernel/*.c
- *
- * Revision 1.4  2002/11/07 09:00:44  starvik
- * Names changed for init sections
- * init_task_union -> init_thread_union
- *
- * Revision 1.3  2002/02/05 15:38:23  bjornw
- * Oops.. non-CRAMFS_MAGIC should jump over the copying, not into it...
- *
- * Revision 1.2  2001/12/18 13:35:19  bjornw
- * Applied the 2.4.13->2.4.16 CRIS patch to 2.5.1 (is a copy of 2.4.15).
- *
- * Revision 1.43  2001/11/08 15:09:43  starvik
- * Only start MII clock if Ethernet is configured
- *
- * Revision 1.42  2001/11/08 14:37:34  starvik
- * Start MII clock early to make sure that it is running at tranceiver reset
- *
- * Revision 1.41  2001/10/29 14:55:58  pkj
- * Corrected pa$r0 to par0.
- *
- * Revision 1.40  2001/10/03 14:59:57  pkj
- * Added support for resetting the Bluetooth hardware.
- *
- * Revision 1.39  2001/10/01 14:45:03  bjornw
- * Removed underscores and added register prefixes
- *
- * Revision 1.38  2001/09/21 07:14:11  jonashg
- * Made root filesystem (cramfs) use mtdblock driver when booting from flash.
- *
- * Revision 1.37  2001/09/11 13:44:29  orjanf
- * Decouple usage of serial ports for debug and kgdb.
- *
- * Revision 1.36  2001/06/29 12:39:31  pkj
- * Added support for mirroring the first flash to just below the
- * second one, to make them look consecutive to cramfs.
- *
- * Revision 1.35  2001/06/25 14:07:00  hp
- * 	Fix review comment.
- * 	* head.S: Use IO_STATE, IO_FIELD and IO_MASK constructs instead of
- * 	magic numbers.  Add comment that -traditional must not be used.
- * 	* entry.S (SYMBOL_NAME): Change redefinition to use ## concatenation.
- * 	Correct and update comment.
- * 	* Makefile (.S.o): Don't use -traditional.  Add comment why the
- * 	toplevel rule can't be used (now that there's a reason).
- *
- * Revision 1.34  2001/05/15 07:08:14  hp
- * Tweak "notice" to reflect that both r8 r9 are used
- *
- * Revision 1.33  2001/05/15 06:40:05  hp
- * Put bulk of code in .text.init, data in .data.init
- *
- * Revision 1.32  2001/05/15 06:18:56  hp
- * Execute review comment: s/bcc/bhs/g; s/bcs/blo/g
- *
- * Revision 1.31  2001/05/15 06:08:40  hp
- * Add sentence about autodetecting the bit31-MMU-bug
- *
- * Revision 1.30  2001/05/15 06:00:05  hp
- * Update comment: LOW_MAP is not forced on xsim anymore.
- *
- * Revision 1.29  2001/04/18 12:51:59  orjanf
- * * Reverted review change regarding the use of bcs/bcc.
- * * Removed non-working LED-clearing code.
- *
- * Revision 1.28  2001/04/17 13:58:39  orjanf
- * * Renamed CONFIG_KGDB to CONFIG_ETRAX_KGDB.
- *
- * Revision 1.27  2001/04/17 11:42:35  orjanf
- * Changed according to review:
- * * Added comment explaining memory map bug.
- * * Changed bcs and bcc to blo and bhs, respectively.
- * * Removed mentioning of Stallone and Olga boards.
- *
- * Revision 1.26  2001/04/06 12:31:07  jonashg
- * Check for cramfs in flash before RAM instead of RAM before flash.
- *
- * Revision 1.25  2001/04/04 06:23:53  starvik
- * Initialize DRAM if not already initialized
- *
- * Revision 1.24  2001/04/03 11:12:00  starvik
- * Removed dram init (done by rescue or etrax100boot
- * Corrected include
- *
- * Revision 1.23  2001/04/03 09:53:03  starvik
- * Include hw_settings.S
- *
- * Revision 1.22  2001/03/26 14:23:26  bjornw
- * Namechange of some config options
- *
- * Revision 1.21  2001/03/08 12:14:41  bjornw
- * * Config name for ETRAX IDE was renamed
- * * Removed G27 auto-setting when JULIETTE is chosen (need to make this
- *   a new config option later)
- *
- * Revision 1.20  2001/02/23 12:47:56  bjornw
- * MMU regs during LOW_MAP updated to reflect a newer reality
- *
- * Revision 1.19  2001/02/19 11:12:07  bjornw
- * Changed comment header format
- *
- * Revision 1.18  2001/02/15 07:25:38  starvik
- * Added support for synchronous serial ports
- *
- * Revision 1.17  2001/02/08 15:53:13  starvik
- * Last commit removed some important ifdefs
- *
- * Revision 1.16  2001/02/08 15:20:38  starvik
- * Include dram_init.S as inline
- *
- * Revision 1.15  2001/01/29 18:12:01  bjornw
- * Corrected some comments
- *
- * Revision 1.14  2001/01/29 13:11:29  starvik
- * Include dram_init.S (with DRAM/SDRAM initialization)
- *
- * Revision 1.13  2001/01/23 14:54:57  markusl
- * Updated for USB
- * i.e. added r_gen_config settings
- *
- * Revision 1.12  2001/01/19 16:16:29  perf
- * Added temporary mapping of 0x0c->0x0c to avoid flash loading confusion.
- * Renamed serial options from ETRAX100 to ETRAX.
- *
- * Revision 1.11  2001/01/16 16:31:38  bjornw
- * * Changed name and semantics of running_from_flash to romfs_in_flash,
- *   set by head.S to indicate to setup.c whether there is a cramfs image
- *   after the kernels BSS or not. Should work for all three boot-cases
- *   (DRAM with cramfs in DRAM, DRAM with cramfs in flash (compressed boot),
- *    and flash with cramfs in flash)
- *
- * Revision 1.10  2001/01/16 14:12:21  bjornw
- * * Check for cramfs start passed in r9 from the decompressor, if all other
- *   cramfs options fail (if we boot from DRAM but don't find a cramfs image
- *   after the kernel in DRAM, it is probably still in the flash)
- * * Check magic in cramfs detection when booting from flash directly
- *
- * Revision 1.9  2001/01/15 17:17:02  bjornw
- * * Corrected the code that detects the cramfs lengths
- * * Added a comment saying that the above does not work due to other
- *   reasons..
- *
- * Revision 1.8  2001/01/15 16:27:51  jonashg
- * Made boot after flashing work.
- * * end destination is __vmlinux_end in RAM.
- * * _romfs_start moved because of virtual memory.
- *
- * Revision 1.7  2000/11/21 13:55:29  bjornw
- * Use CONFIG_CRIS_LOW_MAP for the low VM map instead of explicit CPU type
- *
- * Revision 1.6  2000/10/06 12:36:55  bjornw
- * Forgot swapper_pg_dir when changing memory map..
- *
- * Revision 1.5  2000/10/04 16:49:30  bjornw
- * * Fixed memory mapping in LX
- * * Check for cramfs instead of romfs
- *
  */
 	
 #define ASSEMBLER_MACROS_ONLY
@@ -595,11 +419,17 @@ no_command_line:
 
 	moveq	0,$r0
 
+	;; Select or disable serial port 2
+#ifdef CONFIG_ETRAX_SERIAL_PORT2
+	or.d	  IO_STATE (R_GEN_CONFIG, ser2, select),$r0
+#else
+	or.d	  IO_STATE (R_GEN_CONFIG, ser2, disable),$r0
+#endif
+
 	;; Init interfaces (disable them).
 	or.d	  IO_STATE (R_GEN_CONFIG, scsi0, disable) \
 		| IO_STATE (R_GEN_CONFIG, ata, disable) \
 		| IO_STATE (R_GEN_CONFIG, par0, disable) \
-		| IO_STATE (R_GEN_CONFIG, ser2, disable) \
 		| IO_STATE (R_GEN_CONFIG, mio, disable) \
 		| IO_STATE (R_GEN_CONFIG, scsi1, disable) \
 		| IO_STATE (R_GEN_CONFIG, scsi0w, disable) \
@@ -801,6 +631,41 @@ no_command_line:
 		| IO_STATE (R_SERIAL1_TR_CTRL, tr_bitnr, tr_8bit),$r0
 	move.b	$r0,[R_SERIAL1_TR_CTRL]
 
+#ifdef CONFIG_ETRAX_SERIAL_PORT2
+	;; setup the serial port 2 at 115200 baud for debug purposes
+
+	moveq	  IO_STATE (R_SERIAL2_XOFF, tx_stop, enable)		\
+		| IO_STATE (R_SERIAL2_XOFF, auto_xoff, disable)		\
+		| IO_FIELD (R_SERIAL2_XOFF, xoff_char, 0),$r0
+	move.d	$r0,[R_SERIAL2_XOFF]
+
+	; 115.2kbaud for both transmit and receive
+	move.b	  IO_STATE (R_SERIAL2_BAUD, tr_baud, c115k2Hz)		\
+		| IO_STATE (R_SERIAL2_BAUD, rec_baud, c115k2Hz),$r0
+	move.b	$r0,[R_SERIAL2_BAUD]
+
+	; Set up and enable the serial2 receiver.
+	move.b	  IO_STATE (R_SERIAL2_REC_CTRL, dma_err, stop)		\
+		| IO_STATE (R_SERIAL2_REC_CTRL, rec_enable, enable)	\
+		| IO_STATE (R_SERIAL2_REC_CTRL, rts_, active)		\
+		| IO_STATE (R_SERIAL2_REC_CTRL, sampling, middle)	\
+		| IO_STATE (R_SERIAL2_REC_CTRL, rec_stick_par, normal)	\
+		| IO_STATE (R_SERIAL2_REC_CTRL, rec_par, even)		\
+		| IO_STATE (R_SERIAL2_REC_CTRL, rec_par_en, disable)	\
+		| IO_STATE (R_SERIAL2_REC_CTRL, rec_bitnr, rec_8bit),$r0
+	move.b	$r0,[R_SERIAL2_REC_CTRL]
+
+	; Set up and enable the serial2 transmitter.
+	move.b	  IO_FIELD (R_SERIAL2_TR_CTRL, txd, 0)			\
+		| IO_STATE (R_SERIAL2_TR_CTRL, tr_enable, enable)	\
+		| IO_STATE (R_SERIAL2_TR_CTRL, auto_cts, disabled)	\
+		| IO_STATE (R_SERIAL2_TR_CTRL, stop_bits, one_bit)	\
+		| IO_STATE (R_SERIAL2_TR_CTRL, tr_stick_par, normal)	\
+		| IO_STATE (R_SERIAL2_TR_CTRL, tr_par, even)		\
+		| IO_STATE (R_SERIAL2_TR_CTRL, tr_par_en, disable)	\
+		| IO_STATE (R_SERIAL2_TR_CTRL, tr_bitnr, tr_8bit),$r0
+	move.b	$r0,[R_SERIAL2_TR_CTRL]
+#endif
 	
 #ifdef CONFIG_ETRAX_SERIAL_PORT3	
 	;; setup the serial port 3 at 115200 baud for debug purposes

arch/cris/arch-v10/kernel/irq.c

-/* $Id: irq.c,v 1.4 2005/01/04 12:22:28 starvik Exp $
- *
+/*
  *	linux/arch/cris/kernel/irq.c
  *
  *      Copyright (c) 2000-2002 Axis Communications AB
@@ -18,10 +17,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-/* From kgdb.c. */
-extern void kgdb_init(void);
-extern void breakpoint(void);
-
 #define mask_irq(irq_nr) (*R_VECT_MASK_CLR = 1 << (irq_nr));
 #define unmask_irq(irq_nr) (*R_VECT_MASK_SET = 1 << (irq_nr));
 

arch/cris/arch-v10/kernel/kgdb.c

@@ -17,66 +17,8 @@
 *! Jun 17 1999  Hendrik Ruijter Added gdb 4.18 support. 'X', 'qC' and 'qL'.
 *! Jul 21 1999  Bjorn Wesen     eLinux port
 *!
-*! $Log: kgdb.c,v $
-*! Revision 1.6  2005/01/14 10:12:17  starvik
-*! KGDB on separate port.
-*! Console fixes from 2.4.
-*!
-*! Revision 1.5  2004/10/07 13:59:08  starvik
-*! Corrected call to set_int_vector
-*!
-*! Revision 1.4  2003/04/09 05:20:44  starvik
-*! Merge of Linux 2.5.67
-*!
-*! Revision 1.3  2003/01/21 19:11:08  starvik
-*! Modified include path for new dir layout
-*!
-*! Revision 1.2  2002/11/19 14:35:24  starvik
-*! Changes from linux 2.4
-*! Changed struct initializer syntax to the currently preferred notation
-*!
-*! Revision 1.1  2001/12/17 13:59:27  bjornw
-*! Initial revision
-*!
-*! Revision 1.6  2001/10/09 13:10:03  matsfg
-*! Added $ on registers and removed some underscores
-*!
-*! Revision 1.5  2001/04/17 13:58:39  orjanf
-*! * Renamed CONFIG_KGDB to CONFIG_ETRAX_KGDB.
-*!
-*! Revision 1.4  2001/02/23 13:45:19  bjornw
-*! config.h check
-*!
-*! Revision 1.3  2001/01/31 18:08:23  orjanf
-*! Removed kgdb_handle_breakpoint from being the break 8 handler.
-*!
-*! Revision 1.2  2001/01/12 14:22:25  orjanf
-*! Updated kernel debugging support to work with ETRAX 100LX.
-*!
-*! Revision 1.1  2000/07/10 16:25:21  bjornw
-*! Initial revision
-*!
-*! Revision 1.1.1.1  1999/12/03 14:57:31  bjornw
-*! * Initial version of arch/cris, the latest CRIS architecture with an MMU.
-*!   Mostly copied from arch/etrax100 with appropriate renames of files.
-*!   The mm/ subdir is copied from arch/i386.
-*!   This does not compile yet at all.
-*!
-*!
-*! Revision 1.4  1999/07/22 17:25:25  bjornw
-*! Dont wait for + in putpacket if we havent hit the initial breakpoint yet. Added a kgdb_init function which sets up the break and irq vectors.
-*!
-*! Revision 1.3  1999/07/21 19:51:18  bjornw
-*! Check if the interrupting char is a ctrl-C, ignore otherwise.
-*!
-*! Revision 1.2  1999/07/21 18:09:39  bjornw
-*! Ported to eLinux architecture, and added some kgdb documentation.
-*!
-*!
 *!---------------------------------------------------------------------------
 *!
-*! $Id: kgdb.c,v 1.6 2005/01/14 10:12:17 starvik Exp $
-*!
 *! (C) Copyright 1999, Axis Communications AB, LUND, SWEDEN
 *!
 *!**************************************************************************/

arch/cris/arch-v10/kernel/process.c

-/* $Id: process.c,v 1.12 2004/12/27 11:18:32 starvik Exp $
- * 
+/*
  *  linux/arch/cris/kernel/process.c
  *
  *  Copyright (C) 1995  Linus Torvalds

arch/cris/arch-v10/kernel/ptrace.c

@@ -65,6 +65,7 @@ void
 ptrace_disable(struct task_struct *child)
 {
        /* Todo - pending singlesteps? */
+       clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
 }
 
 /* 

arch/cris/arch-v10/kernel/shadows.c

-/* $Id: shadows.c,v 1.2 2004/12/13 12:21:51 starvik Exp $
- * 
+/*
  * Various shadow registers. Defines for these are in include/asm-etrax100/io.h
  */
 

arch/cris/arch-v10/kernel/traps.c

-/* $Id: traps.c,v 1.4 2005/04/24 18:47:55 starvik Exp $
+/*
+ * Helper functions for trap handlers
  *
- *  linux/arch/cris/arch-v10/traps.c
+ * Copyright (C) 2000-2007, Axis Communications AB.
  *
- *  Heler functions for trap handlers
- * 
- *  Copyright (C) 2000-2002 Axis Communications AB
- *
- *  Authors:   Bjorn Wesen
- *  	       Hans-Peter Nilsson
+ * Authors:   Bjorn Wesen
+ *            Hans-Peter Nilsson
  *
  */
 
@@ -15,124 +12,119 @@
 #include <asm/uaccess.h>
 #include <asm/arch/sv_addr_ag.h>
 
-extern int raw_printk(const char *fmt, ...);
-
-void 
-show_registers(struct pt_regs * regs)
+void
+show_registers(struct pt_regs *regs)
 {
-	/* We either use rdusp() - the USP register, which might not
-	   correspond to the current process for all cases we're called,
-	   or we use the current->thread.usp, which is not up to date for
-	   the current process.  Experience shows we want the USP
-	   register.  */
+	/*
+	 * It's possible to use either the USP register or current->thread.usp.
+	 * USP might not correspond to the current process for all cases this
+	 * function is called, and current->thread.usp isn't up to date for the
+	 * current process. Experience shows that using USP is the way to go.
+	 */
 	unsigned long usp = rdusp();
 
-	raw_printk("IRP: %08lx SRP: %08lx DCCR: %08lx USP: %08lx MOF: %08lx\n",
-	       regs->irp, regs->srp, regs->dccr, usp, regs->mof );
-	raw_printk(" r0: %08lx  r1: %08lx   r2: %08lx  r3: %08lx\n",
+	printk("IRP: %08lx SRP: %08lx DCCR: %08lx USP: %08lx MOF: %08lx\n",
+	       regs->irp, regs->srp, regs->dccr, usp, regs->mof);
+
+	printk(" r0: %08lx  r1: %08lx   r2: %08lx  r3: %08lx\n",
 	       regs->r0, regs->r1, regs->r2, regs->r3);
-	raw_printk(" r4: %08lx  r5: %08lx   r6: %08lx  r7: %08lx\n",
+
+	printk(" r4: %08lx  r5: %08lx   r6: %08lx  r7: %08lx\n",
 	       regs->r4, regs->r5, regs->r6, regs->r7);
-	raw_printk(" r8: %08lx  r9: %08lx  r10: %08lx r11: %08lx\n",
+
+	printk(" r8: %08lx  r9: %08lx  r10: %08lx r11: %08lx\n",
 	       regs->r8, regs->r9, regs->r10, regs->r11);
-	raw_printk("r12: %08lx r13: %08lx oR10: %08lx  sp: %08lx\n",
-	       regs->r12, regs->r13, regs->orig_r10, regs);
-	raw_printk("R_MMU_CAUSE: %08lx\n", (unsigned long)*R_MMU_CAUSE);
-	raw_printk("Process %s (pid: %d, stackpage=%08lx)\n",
+
+	printk("r12: %08lx r13: %08lx oR10: %08lx  sp: %08lx\n",
+	       regs->r12, regs->r13, regs->orig_r10, (long unsigned)regs);
+
+	printk("R_MMU_CAUSE: %08lx\n", (unsigned long)*R_MMU_CAUSE);
+
+	printk("Process %s (pid: %d, stackpage=%08lx)\n",
 	       current->comm, current->pid, (unsigned long)current);
 
 	/*
-         * When in-kernel, we also print out the stack and code at the
-         * time of the fault..
-         */
-        if (! user_mode(regs)) {
-	  	int i;
+	 * When in-kernel, we also print out the stack and code at the
+	 * time of the fault..
+	 */
+	if (!user_mode(regs)) {
+		int i;
 
-                show_stack(NULL, (unsigned long*)usp);
+		show_stack(NULL, (unsigned long *)usp);
 
-		/* Dump kernel stack if the previous dump wasn't one.  */
+		/*
+		 * If the previous stack-dump wasn't a kernel one, dump the
+		 * kernel stack now.
+		 */
 		if (usp != 0)
-			show_stack (NULL, NULL);
-
-                raw_printk("\nCode: ");
-                if(regs->irp < PAGE_OFFSET)
-                        goto bad;
-
-		/* Often enough the value at regs->irp does not point to
-		   the interesting instruction, which is most often the
-		   _previous_ instruction.  So we dump at an offset large
-		   enough that instruction decoding should be in sync at
-		   the interesting point, but small enough to fit on a row
-		   (sort of).  We point out the regs->irp location in a
-		   ksymoops-friendly way by wrapping the byte for that
-		   address in parentheses.  */
-                for(i = -12; i < 12; i++)
-                {
-                        unsigned char c;
-                        if(__get_user(c, &((unsigned char*)regs->irp)[i])) {
-bad:
-                                raw_printk(" Bad IP value.");
-                                break;
-                        }
+			show_stack(NULL, NULL);
+
+		printk("\nCode: ");
+
+		if (regs->irp < PAGE_OFFSET)
+			goto bad_value;
+
+		/*
+		 * Quite often the value at regs->irp doesn't point to the
+		 * interesting instruction, which often is the previous
+		 * instruction. So dump at an offset large enough that the
+		 * instruction decoding should be in sync at the interesting
+		 * point, but small enough to fit on a row. The regs->irp
+		 * location is pointed out in a ksymoops-friendly way by
+		 * wrapping the byte for that address in parenthesises.
+		 */
+		for (i = -12; i < 12; i++) {
+			unsigned char c;
+
+			if (__get_user(c, &((unsigned char *)regs->irp)[i])) {
+bad_value:
+				printk(" Bad IP value.");
+				break;
+			}
 
 			if (i == 0)
-			  raw_printk("(%02x) ", c);
+				printk("(%02x) ", c);
 			else
-			  raw_printk("%02x ", c);
-                }
-		raw_printk("\n");
-        }
+				printk("%02x ", c);
+		}
+		printk("\n");
+	}
 }
 
-/* Called from entry.S when the watchdog has bitten
- * We print out something resembling an oops dump, and if
- * we have the nice doggy development flag set, we halt here
- * instead of rebooting.
- */
-
-extern void reset_watchdog(void);
-extern void stop_watchdog(void);
-
-
 void
-watchdog_bite_hook(struct pt_regs *regs)
+arch_enable_nmi(void)
 {
-#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
-	local_irq_disable();
-	stop_watchdog();
-	show_registers(regs);
-	while(1) /* nothing */;
-#else
-	show_registers(regs);
-#endif	
+	asm volatile ("setf m");
 }
 
-/* This is normally the 'Oops' routine */
-void 
-die_if_kernel(const char * str, struct pt_regs * regs, long err)
+extern void (*nmi_handler)(struct pt_regs *);
+void handle_nmi(struct pt_regs *regs)
 {
-	if(user_mode(regs))
-		return;
-
-#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
-	/* This printout might take too long and trigger the 
-	 * watchdog normally. If we're in the nice doggy
-	 * development mode, stop the watchdog during printout.
-	 */
-	stop_watchdog();
-#endif
-
-	raw_printk("%s: %04lx\n", str, err & 0xffff);
-
-	show_registers(regs);
-
-#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
-	reset_watchdog();
-#endif
-	do_exit(SIGSEGV);
+	if (nmi_handler)
+		nmi_handler(regs);
+
+	/* Wait until nmi is no longer active. (We enable NMI immediately after
+	   returning from this function, and we don't want it happening while
+	   exiting from the NMI interrupt handler.) */
+	while (*R_IRQ_MASK0_RD & IO_STATE(R_IRQ_MASK0_RD, nmi_pin, active))
+		;
 }
 
-void arch_enable_nmi(void)
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+void
+handle_BUG(struct pt_regs *regs)
 {
-  asm volatile("setf m");
+	struct bug_frame f;
+	unsigned char c;
+	unsigned long irp = regs->irp;
+
+	if (__copy_from_user(&f, (const void __user *)(irp - 8), sizeof f))
+		return;
+	if (f.prefix != BUG_PREFIX || f.magic != BUG_MAGIC)
+		return;
+	if (__get_user(c, f.filename))
+		f.filename = "<bad filename>";
+
+	printk("kernel BUG at %s:%d!\n", f.filename, f.line);
 }
+#endif

arch/cris/arch-v10/lib/checksum.S

-/* $Id: checksum.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $
+/*
  * A fast checksum routine using movem
  * Copyright (c) 1998-2001 Axis Communications AB
  *
@@ -61,8 +61,6 @@ _mloop:	movem	[$r10+],$r9	; read 10 longwords
 	
 	ax
 	addq	0,$r12
-	ax			; do it again, since we might have generated a carry
-	addq	0,$r12
 
 	subq	10*4,$r11
 	bge	_mloop
@@ -88,10 +86,6 @@ _word_loop:
 	lsrq	16,$r13		; r13 = checksum >> 16
 	and.d	$r9,$r12		; checksum = checksum & 0xffff
 	add.d	$r13,$r12		; checksum += r13
-	move.d	$r12,$r13		; do the same again, maybe we got a carry last add
-	lsrq	16,$r13
-	and.d	$r9,$r12
-	add.d	$r13,$r12
 
 _no_fold:
 	cmpq	2,$r11

arch/cris/arch-v10/lib/checksumcopy.S

-/* $Id: checksumcopy.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $
+/*
  * A fast checksum+copy routine using movem
  * Copyright (c) 1998, 2001 Axis Communications AB
  *
@@ -67,8 +67,6 @@ _mloop:	movem	[$r10+],$r9	; read 10 longwords
 	
 	ax
 	addq	0,$r13
-	ax			; do it again, since we might have generated a carry
-	addq	0,$r13
 
 	subq	10*4,$r12
 	bge	_mloop
@@ -91,10 +89,6 @@ _word_loop:
 	lsrq	16,$r9		; r0 = checksum >> 16
 	and.d	0xffff,$r13	; checksum = checksum & 0xffff
 	add.d	$r9,$r13	; checksum += r0
-	move.d	$r13,$r9	; do the same again, maybe we got a carry last add
-	lsrq	16,$r9
-	and.d	0xffff,$r13
-	add.d	$r9,$r13
 	
 _no_fold:
 	cmpq	2,$r12

arch/cris/arch-v10/lib/dram_init.S

-/* $Id: dram_init.S,v 1.4 2003/09/22 09:21:59 starvik Exp $
- * 
+/*
  * DRAM/SDRAM initialization - alter with care
  * This file is intended to be included from other assembler files
  *
@@ -8,60 +7,7 @@
  *
  * Copyright (C) 2000, 2001 Axis Communications AB
  *
- * Authors:  Mikael Starvik (starvik@axis.com)	
- * 
- * $Log: dram_init.S,v $
- * Revision 1.4  2003/09/22 09:21:59  starvik
- * Decompresser is linked to 0x407xxxxx and sdram commands are at 0x000xxxxx
- * so we need to mask off 12 bits.
- *
- * Revision 1.3  2003/03/31 09:38:37  starvik
- * Corrected calculation of end of sdram init commands
- *
- * Revision 1.2  2002/11/19 13:33:29  starvik
- * Changes from Linux 2.4
- *
- * Revision 1.13  2002/10/30 07:42:28  starvik
- * Always read SDRAM command sequence from flash
- *
- * Revision 1.12  2002/08/09 11:37:37  orjanf
- * Added double initialization work-around for Samsung SDRAMs.
- *
- * Revision 1.11  2002/06/04 11:43:21  starvik
- * Check if mrs_data is specified in kernelconfig (necessary for MCM)
- *
- * Revision 1.10  2001/10/04 12:00:21  martinnn
- * Added missing underscores.
- *
- * Revision 1.9  2001/10/01 14:47:35  bjornw
- * Added register prefixes and removed underscores
- *
- * Revision 1.8  2001/05/15 07:12:45  hp
- * Copy warning from head.S about r8 and r9
- *
- * Revision 1.7  2001/04/18 12:05:39  bjornw
- * Fixed comments, and explicitly include config.h to be sure its there
- *
- * Revision 1.6  2001/04/10 06:20:16  starvik
- * Delay should be 200us, not 200ns
- *
- * Revision 1.5  2001/04/09 06:01:13  starvik
- * Added support for 100 MHz SDRAMs
- *
- * Revision 1.4  2001/03/26 14:24:01  bjornw
- * Namechange of some config options
- *
- * Revision 1.3  2001/03/23 08:29:41  starvik
- * Corrected calculation of mrs_data
- *
- * Revision 1.2  2001/02/08 15:20:00  starvik
- * Corrected SDRAM initialization
- * Should now be included as inline
- *
- * Revision 1.1  2001/01/29 13:08:02  starvik
- * Initial version
- * This file should be included from all assembler files that needs to
- * initialize DRAM/SDRAM.
+ * Authors:  Mikael Starvik (starvik@axis.com)
  *
  */
 

arch/cris/arch-v10/lib/old_checksum.c

-/* $Id: old_checksum.c,v 1.3 2003/10/27 08:04:32 starvik Exp $
- *
+/*
  * INET		An implementation of the TCP/IP protocol suite for the LINUX
  *		operating system.  INET is implemented using the  BSD Socket
  *		interface as the means of communication with the user level.

arch/cris/arch-v32/boot/Makefile

 #
 # arch/cris/arch-v32/boot/Makefile
 #
-target = $(target_boot_dir)
-src    = $(src_boot_dir)
 
-zImage: compressed/vmlinuz
+OBJCOPY = objcopy-cris
+OBJCOPYFLAGS = -O binary -R .note -R .comment
 
-compressed/vmlinuz: $(objtree)/vmlinux
-	@$(MAKE) -f $(src)/compressed/Makefile $(objtree)/vmlinuz
+subdir- := compressed rescue
+targets := Image
 
-clean:
-	rm -f zImage tools/build compressed/vmlinux.out
-	@$(MAKE) -f $(src)/compressed/Makefile clean
+$(obj)/Image: vmlinux FORCE
+	$(call if_changed,objcopy)
+	@echo '  Kernel: $@ is ready'
+
+$(obj)/compressed/vmlinux: $(obj)/Image FORCE
+	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
+	$(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin
+
+$(obj)/zImage:  $(obj)/compressed/vmlinux
+	@cp $< $@
+	@echo '  Kernel: $@ is ready'