提交 0cc8674f 编写于 作者: A Andrew Victor 提交者: Jeff Garzik

AT91: MACB support

The Atmel MACB Ethernet peripheral is also integrated in the AT91SAM9260
and AT91SAM9263 processors.  The differences from the AVR32 version are:
      * Single peripheral clock.
      * MII/RMII selection bit is inverted.
      * Clock enable bit.

Original patch from Patrice Vilchez.
Signed-off-by: NAndrew Victor <andrew@sanpeople.com>
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>
上级 683349a3
......@@ -190,7 +190,7 @@ config MII
config MACB
tristate "Atmel MACB support"
depends on NET_ETHERNET && AVR32
depends on NET_ETHERNET && (AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263)
select MII
help
The Atmel MACB ethernet interface is found on many AT32 and AT91
......
......@@ -1046,6 +1046,14 @@ static int __devinit macb_probe(struct platform_device *pdev)
spin_lock_init(&bp->lock);
#if defined(CONFIG_ARCH_AT91)
bp->pclk = clk_get(&pdev->dev, "macb_clk");
if (IS_ERR(bp->pclk)) {
dev_err(&pdev->dev, "failed to get macb_clk\n");
goto err_out_free_dev;
}
clk_enable(bp->pclk);
#else
bp->pclk = clk_get(&pdev->dev, "pclk");
if (IS_ERR(bp->pclk)) {
dev_err(&pdev->dev, "failed to get pclk\n");
......@@ -1059,6 +1067,7 @@ static int __devinit macb_probe(struct platform_device *pdev)
clk_enable(bp->pclk);
clk_enable(bp->hclk);
#endif
bp->regs = ioremap(regs->start, regs->end - regs->start + 1);
if (!bp->regs) {
......@@ -1119,9 +1128,17 @@ static int __devinit macb_probe(struct platform_device *pdev)
pdata = pdev->dev.platform_data;
if (pdata && pdata->is_rmii)
#if defined(CONFIG_ARCH_AT91)
macb_writel(bp, USRIO, (MACB_BIT(RMII) | MACB_BIT(CLKEN)) );
#else
macb_writel(bp, USRIO, 0);
#endif
else
#if defined(CONFIG_ARCH_AT91)
macb_writel(bp, USRIO, MACB_BIT(CLKEN));
#else
macb_writel(bp, USRIO, MACB_BIT(MII));
#endif
bp->tx_pending = DEF_TX_RING_PENDING;
......@@ -1148,9 +1165,11 @@ static int __devinit macb_probe(struct platform_device *pdev)
err_out_iounmap:
iounmap(bp->regs);
err_out_disable_clocks:
#ifndef CONFIG_ARCH_AT91
clk_disable(bp->hclk);
clk_disable(bp->pclk);
clk_put(bp->hclk);
#endif
clk_disable(bp->pclk);
err_out_put_pclk:
clk_put(bp->pclk);
err_out_free_dev:
......@@ -1173,9 +1192,11 @@ static int __devexit macb_remove(struct platform_device *pdev)
unregister_netdev(dev);
free_irq(dev->irq, dev);
iounmap(bp->regs);
#ifndef CONFIG_ARCH_AT91
clk_disable(bp->hclk);
clk_disable(bp->pclk);
clk_put(bp->hclk);
#endif
clk_disable(bp->pclk);
clk_put(bp->pclk);
free_netdev(dev);
platform_set_drvdata(pdev, NULL);
......
......@@ -200,7 +200,7 @@
#define MACB_SOF_OFFSET 30
#define MACB_SOF_SIZE 2
/* Bitfields in USRIO */
/* Bitfields in USRIO (AVR32) */
#define MACB_MII_OFFSET 0
#define MACB_MII_SIZE 1
#define MACB_EAM_OFFSET 1
......@@ -210,6 +210,12 @@
#define MACB_TX_PAUSE_ZERO_OFFSET 3
#define MACB_TX_PAUSE_ZERO_SIZE 1
/* Bitfields in USRIO (AT91) */
#define MACB_RMII_OFFSET 0
#define MACB_RMII_SIZE 1
#define MACB_CLKEN_OFFSET 1
#define MACB_CLKEN_SIZE 1
/* Bitfields in WOL */
#define MACB_IP_OFFSET 0
#define MACB_IP_SIZE 16
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册