提交 0ca24daf 编写于 作者: J Johannes Berg 提交者: John W. Linville

iwlwifi: add trailing newline to various messages

A whole bunch of messages, even some recent ones,
didn't include a trailing newline so add it.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 e1f0c501
......@@ -615,7 +615,7 @@ static void iwlagn_print_uartmsg(struct iwl_priv *priv,
struct iwl_bt_uart_msg *uart_msg)
{
IWL_DEBUG_COEX(priv, "Message Type = 0x%X, SSN = 0x%X, "
"Update Req = 0x%X",
"Update Req = 0x%X\n",
(BT_UART_MSG_FRAME1MSGTYPE_MSK & uart_msg->frame1) >>
BT_UART_MSG_FRAME1MSGTYPE_POS,
(BT_UART_MSG_FRAME1SSN_MSK & uart_msg->frame1) >>
......@@ -624,7 +624,7 @@ static void iwlagn_print_uartmsg(struct iwl_priv *priv,
BT_UART_MSG_FRAME1UPDATEREQ_POS);
IWL_DEBUG_COEX(priv, "Open connections = 0x%X, Traffic load = 0x%X, "
"Chl_SeqN = 0x%X, In band = 0x%X",
"Chl_SeqN = 0x%X, In band = 0x%X\n",
(BT_UART_MSG_FRAME2OPENCONNECTIONS_MSK & uart_msg->frame2) >>
BT_UART_MSG_FRAME2OPENCONNECTIONS_POS,
(BT_UART_MSG_FRAME2TRAFFICLOAD_MSK & uart_msg->frame2) >>
......@@ -635,7 +635,7 @@ static void iwlagn_print_uartmsg(struct iwl_priv *priv,
BT_UART_MSG_FRAME2INBAND_POS);
IWL_DEBUG_COEX(priv, "SCO/eSCO = 0x%X, Sniff = 0x%X, A2DP = 0x%X, "
"ACL = 0x%X, Master = 0x%X, OBEX = 0x%X",
"ACL = 0x%X, Master = 0x%X, OBEX = 0x%X\n",
(BT_UART_MSG_FRAME3SCOESCO_MSK & uart_msg->frame3) >>
BT_UART_MSG_FRAME3SCOESCO_POS,
(BT_UART_MSG_FRAME3SNIFF_MSK & uart_msg->frame3) >>
......@@ -649,12 +649,12 @@ static void iwlagn_print_uartmsg(struct iwl_priv *priv,
(BT_UART_MSG_FRAME3OBEX_MSK & uart_msg->frame3) >>
BT_UART_MSG_FRAME3OBEX_POS);
IWL_DEBUG_COEX(priv, "Idle duration = 0x%X",
IWL_DEBUG_COEX(priv, "Idle duration = 0x%X\n",
(BT_UART_MSG_FRAME4IDLEDURATION_MSK & uart_msg->frame4) >>
BT_UART_MSG_FRAME4IDLEDURATION_POS);
IWL_DEBUG_COEX(priv, "Tx Activity = 0x%X, Rx Activity = 0x%X, "
"eSCO Retransmissions = 0x%X",
"eSCO Retransmissions = 0x%X\n",
(BT_UART_MSG_FRAME5TXACTIVITY_MSK & uart_msg->frame5) >>
BT_UART_MSG_FRAME5TXACTIVITY_POS,
(BT_UART_MSG_FRAME5RXACTIVITY_MSK & uart_msg->frame5) >>
......@@ -662,14 +662,14 @@ static void iwlagn_print_uartmsg(struct iwl_priv *priv,
(BT_UART_MSG_FRAME5ESCORETRANSMIT_MSK & uart_msg->frame5) >>
BT_UART_MSG_FRAME5ESCORETRANSMIT_POS);
IWL_DEBUG_COEX(priv, "Sniff Interval = 0x%X, Discoverable = 0x%X",
IWL_DEBUG_COEX(priv, "Sniff Interval = 0x%X, Discoverable = 0x%X\n",
(BT_UART_MSG_FRAME6SNIFFINTERVAL_MSK & uart_msg->frame6) >>
BT_UART_MSG_FRAME6SNIFFINTERVAL_POS,
(BT_UART_MSG_FRAME6DISCOVERABLE_MSK & uart_msg->frame6) >>
BT_UART_MSG_FRAME6DISCOVERABLE_POS);
IWL_DEBUG_COEX(priv, "Sniff Activity = 0x%X, Page = "
"0x%X, Inquiry = 0x%X, Connectable = 0x%X",
"0x%X, Inquiry = 0x%X, Connectable = 0x%X\n",
(BT_UART_MSG_FRAME7SNIFFACTIVITY_MSK & uart_msg->frame7) >>
BT_UART_MSG_FRAME7SNIFFACTIVITY_POS,
(BT_UART_MSG_FRAME7PAGE_MSK & uart_msg->frame7) >>
......
......@@ -2166,7 +2166,7 @@ static void rs_stay_in_table(struct iwl_lq_sta *lq_sta, bool force_search)
(lq_sta->total_success > lq_sta->max_success_limit) ||
((!lq_sta->search_better_tbl) && (lq_sta->flush_timer)
&& (flush_interval_passed))) {
IWL_DEBUG_RATE(priv, "LQ: stay is expired %d %d %d\n:",
IWL_DEBUG_RATE(priv, "LQ: stay is expired %d %d %d\n",
lq_sta->total_failed,
lq_sta->total_success,
flush_interval_passed);
......
......@@ -970,7 +970,7 @@ static int iwlagn_rx_reply_rx(struct iwl_priv *priv,
}
if ((unlikely(phy_res->cfg_phy_cnt > 20))) {
IWL_DEBUG_DROP(priv, "dsp size out of range [0,20]: %d/n",
IWL_DEBUG_DROP(priv, "dsp size out of range [0,20]: %d\n",
phy_res->cfg_phy_cnt);
return 0;
}
......
......@@ -550,7 +550,7 @@ int iwlagn_mac_config(struct ieee80211_hw *hw, u32 changed)
const struct iwl_channel_info *ch_info;
int ret = 0;
IWL_DEBUG_MAC80211(priv, "enter: changed %#x", changed);
IWL_DEBUG_MAC80211(priv, "enter: changed %#x\n", changed);
mutex_lock(&priv->mutex);
......
......@@ -515,7 +515,7 @@ int iwlagn_tx_agg_stop(struct iwl_priv *priv, struct ieee80211_vif *vif,
return 0;
}
IWL_DEBUG_TX_QUEUES(priv, "Can proceed: ssn = next_recl = %d",
IWL_DEBUG_TX_QUEUES(priv, "Can proceed: ssn = next_recl = %d\n",
tid_data->agg.ssn);
turn_off:
priv->tid_data[sta_id][tid].agg.state = IWL_AGG_OFF;
......@@ -570,13 +570,13 @@ int iwlagn_tx_agg_start(struct iwl_priv *priv, struct ieee80211_vif *vif,
}
if (*ssn == tid_data->next_reclaimed) {
IWL_DEBUG_TX_QUEUES(priv, "Can proceed: ssn = next_recl = %d",
IWL_DEBUG_TX_QUEUES(priv, "Can proceed: ssn = next_recl = %d\n",
tid_data->agg.ssn);
tid_data->agg.state = IWL_AGG_ON;
ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
} else {
IWL_DEBUG_TX_QUEUES(priv, "Can't proceed: ssn %d, "
"next_reclaimed = %d",
"next_reclaimed = %d\n",
tid_data->agg.ssn,
tid_data->next_reclaimed);
tid_data->agg.state = IWL_EMPTYING_HW_QUEUE_ADDBA;
......@@ -1059,7 +1059,7 @@ int iwlagn_rx_reply_tx(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb,
if (tid != IWL_TID_NON_QOS) {
priv->tid_data[sta_id][tid].next_reclaimed =
next_reclaimed;
IWL_DEBUG_TX_REPLY(priv, "Next reclaimed packet:%d",
IWL_DEBUG_TX_REPLY(priv, "Next reclaimed packet:%d\n",
next_reclaimed);
}
......
......@@ -976,7 +976,7 @@ void iwl_irq_tasklet(struct iwl_trans *trans)
if (iwl_have_debug_level(IWL_DL_ISR)) {
/* just for debug */
inta_mask = iwl_read32(trans, CSR_INT_MASK);
IWL_DEBUG_ISR(trans, "inta 0x%08x, enabled 0x%08x\n ",
IWL_DEBUG_ISR(trans, "inta 0x%08x, enabled 0x%08x\n",
inta, inta_mask);
}
#endif
......
......@@ -448,7 +448,7 @@ static void iwlagn_tx_queue_stop_scheduler(struct iwl_trans *trans, u16 txq_id)
void iwl_trans_set_wr_ptrs(struct iwl_trans *trans,
int txq_id, u32 index)
{
IWL_DEBUG_TX_QUEUES(trans, "Q %d WrPtr: %d", txq_id, index & 0xff);
IWL_DEBUG_TX_QUEUES(trans, "Q %d WrPtr: %d\n", txq_id, index & 0xff);
iwl_write_direct32(trans, HBUS_TARG_WRPTR,
(index & 0xff) | (txq_id << 8));
iwl_write_prph(trans, SCD_QUEUE_RDPTR(txq_id), index);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册